No preview available
 /
     
1021 Atlantic Blvd ELPP22-0068 Panera fire alarm panel permitOWNER:ADDRESS:CITY:STATE:ZIP: EQUITY ONE ATLANTIC VILLAGE INC 1600 NE MIAMI GARDENS DR NORTH MIAMI BEACH FL 33179 COMPANY:ADDRESS:CITY:STATE:ZIP: WAYNE AUTOMATIC FIRE SPRINKLERS, INC.222 CAPITOL CT OCOEE FL 34761 TYPE OF CONSTRUCTION: REAL ESTATE NUMBER:ZONING:BUILDING USE GROUP:SUBDIVISION: 177602 0040 SECTION LAND JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK: 1021 ATLANTIC BLVD 961 ELECTRICAL COMMERCIAL OR MULTIFAMILY DETAILS PER BLDG PLANS UNIT 899 PANERA - FIRE ALARM PANEL $3250.00 FEES DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT ELEC REPAIRS AND MISC 455-0000-322-1000 0 $35.00 ELECTRICAL BASE FEE 455-0000-322-1000 0 $55.00 STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00 LIST OF CONDITIONS Roll off container company must be on City approved list . Container cannot be placed on City right-of-way. NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be found in the public records of this county, and there may be additional permits required from other governmental entities such as water management districts, state agencies, or federal agencies. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT. MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION. ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES . ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY. 1 of 2Issued Date: 12/1/2022 PERMIT NUMBER ELPP22-0068 ISSUED: 12/1/2022 EXPIRES: 5/30/2023 ELECTRICAL COMMERCIAL OR MULTIFAMILY DETAILS PER BLDG PLANS PERMIT CITY OF ATLANTIC BEACH STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00 TOTAL: $94.00 2 of 2Issued Date: 12/1/2022 PERMIT NUMBER ELPP22-0068 ISSUED: 12/1/2022 EXPIRES: 5/30/2023 ELECTRICAL COMMERCIAL OR MULTIFAMILY DETAILS PER BLDG PLANS PERMIT CITY OF ATLANTIC BEACH 1021 ATLANTIC BLVD ELPP22-0068 DF-60953:C • 7/16/2018 — Page 1 of 4 ES-50X Intelligent Addressable FACP with Communicator Addressable Fire Alarm Control Panels DF-60953:C General The ES-50X is the latest intelligent addressable fire alarm control panel (FACP) from Fire•Lite Alarms and is a direct replacement for the MS-9050UD/LS. The ES-50X comes with a pre-installed communi-cator and supports up to 50 addressable devices in any combination of detectors or modules. With an extensive list of powerful features, the ES-50X programs just like Fire•Lite’s other addressable panels, yet fits into applications previously served only by conventional panels. The pre-installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedi-cated business telephone lines. Although not required, the second-ary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system volt-ages by means of a USB flash drive. The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polar-ity/city box transmitter (4XTMF). Features • Listed to UL Standard 864, 10th edition • Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Tele-phone Service) Central Station Communicator • Optional CELL-MOD or CELL-CAB-FL GSM Central StationCommunicator over AlarmNet® • Compatible with SWIFT® wireless devices • Auto-programming (learn mode) reduces installation time.Reports two devices set to the same address • Two independently programmable, built-in Style Z (Class A) orStyle Y (Class B) NAC circuits • Selectable strobe synchronization for System Sensor, Wheelock,and Gentex devices • Notification Appliance Circuit End of Line resistor matching • Four programmable function keys for ease of maintenance • Two programmable relays and one fixed trouble relay • Built-in Programmer • Integral 80-character LCD display with backlighting • Real-time clock/calendar with automatic daylight savings control • History file with 1,000 event capacity • Addressable sounder base • Multi-criteria detector (smoke, heat, CO) with programmableresponse • Control module delay timer • Automatic detector sensitivity testing (NFPA 72 compliant) • Automatic device type-code verification • Point trouble identification • Waterflow selection per module point • Alarm verification selection per detector point • Maintenance alert warns when smoke detector dust accumula-tion is excessive • One-person audible or silent walktest with walktest log & printout • System alarm verification selection per detector point • PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA72 compliant) • Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus • Remote Acknowledge, Alarm Silence, Reset and Drill viaaddressable modules or remote annunciator • Upload/Download of program and data via USB with optional FS-Tools Programming Utility SLC COMMUNICATION LOOP • Supports LiteSpeed™ and CLIP protocols • SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode withtwisted, unshielded wire • Single addressable SLC loop which meets NFPA Class B andClass A requirements • 50 addressable device capacity (any combination of addressabledetectors and modules) • Compatible with Fire•Lite’s addressable devices (refer to the SLC Wiring Manual) NOTIFICATION APPLIANCE CIRCUITS (NACS) • Two independently programmable output circuits. Circuits can beconfigured for the following outputs: –Style Y (Class B) –Style Z (Class A) • Silence Inhibit and Autosilence timer options • Continuous, March Time, Temporal, or California code for maincircuit board NACs with two-stage capability • Selectable strobe synchronization per NAC • 2.5 A special application, 250mA regulated, total power for NACs NOTE: Maximum or total 24VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A PROGRAMMING AND SOFTWARE • Autoprogramming (learn mode) reduces installation time ELPP22-0068 Page 2 of 4 — DF-60953:C • 7/16/2018 • Custom English labels (per point) may be manually entered orselected from an internal library file • Two programmable Form-C relay outputs • 50 software zones • Continuous fire protection during online programming • Program Check automatically catches common errors not linkedto any zone or input point •OFFLINE PROGRAMMING: Create the entire program in youroffice using FS-Tools, a Windows®-based software package, andupload/download system programming locally. Offline program-ming requires an ethernet connection. FS-Tools is available onwww.firelite.com. User interface LED INDICATORS • Fire Alarm (red) • CO Alarm (red) • AC Power (green) • Supervisory (yellow) • Trouble (yellow) • Ground fault (yellow) • Battery fault (yellow) • Disabled (yellow) • Maintenance (yellow) • Communication (yellow) • Alarm Silenced (yellow) • F1-F4 Programmable Function Keys (yellow) KEYPAD • 16 key alpha-numeric pad • Acknowledge • Alarm Silence • Drill (Manual Evacuate) • Four (4) programmable function keys • Reset (lamp test) Product Line Information ES-50X: Addressable Fire Alarm Control Panel with one SLC loop.Includes main circuit board with display, pre-installed IPOTS-COMcommunicator, chassis with transformer, backbox with door, plasticbag containing screws, cables, key, etc. (For ES-50XC, refer to DF- 60954.) FS-Tools: Programming software for Windows®-based PC com-puter. Available for download at www.firelite.com. CELL-CAB-FL/CELL-MOD: Optional GSM communicators. IPOTS-COM: Dual technology (POTS and IP) communicator.(replacement board) DP-ES-R: Optional dress panel for the ES-50X. TR-CE: Optional trim ring for semi-flush mounting. BB-2F: Optional cabinet for one or two modules. BB-6F: Optional cabinet for up to six modules mounted on CHS-6chassis. BB-26: Battery backbox, holds up to two 25 AH batteries & CHG-75. BB-55F: Battery box, houses two 55 AH batteries CHS-6: Chassis, mounts up to six multi-modules in a BB-6F cabinet. CHG-75: Battery charger for lead-acid batteries with a rating of 25 to75 AH. CHG-120F: Remote battery charging system for lead-acid batterieswith a rating of 55 to 120 AH. Requires additional BB-55F for mount-ing. BAT Series: Batteries, see data sheet DF-52397. PRN Series: UL listed compatible event printer. Uses tractor-fedpaper. OPTIONAL MODULES 4XTMF Reverse Polarity Transmitter Module: Provides a super-vised output for local energy municipal box transmitter, alarm andtrouble. Includes a disable switch and disable trouble LED. COMPATIBLE ANNUNCIATORS ANN-80: Remote, red LCD annunciator mimics the information dis-played on the FACP LCD display. Recommended wire type is un-shielded. ANN-100: Remote LCD annunciator mimics the information dis-played on the FACP LCD display. Recommended wire type is un-shielded. For use in FM applications only. ANN-I/O: LED Driver Module provides connections to a user sup-plied graphic annunciator. (See DF-52430.) ANN-LED: Annunciator Module provides three LEDs for each zone:Alarm, Trouble, and Supervisory. Ships with red enclosure. (See DF- 60241.) ANN-RLED: Provides alarm (red) indicators for up to 30 input zonesor addressable points. (See DF-60241.) ANN-RLY: Relay Module provides 10 programmable Form-C relays.Can be mounted inside the cabinet. (See DF-52431.) ANN-S/PG: Serial/Parallel Printer Gateway module provides a con-nection for a serial or parallel printer. (See DF-52429.) ADDRESSABLE DEVICES All feature a polling LED and rotary switches for addressing. SD365: Addressable low-profile photoelectric smoke detector. Lite-Speed only. SD365-IV: Addressable low-profile photoelectric smoke detector.Ivory. LiteSpeed and CLIP mode. SD365T: Addressable low-profile photoelectric smoke detector withthermal sensor. LiteSpeed only. SD365T-IV: Addressable low-profile photoelectric smoke detectorwith thermal sensor. Ivory. LiteSpeed and CLIP mode. SD365R: Remote test capable addressable photoelectric smokedetector for use with DNR(W) duct detector housing. LiteSpeed only. SD365R-IV: Remote test capable addressable photoelectric smokedetector for use with DNR(W) duct detector housing. Ivory. Lite-Speed and CLIP mode. H365: Low-profile 135°F fixed thermal sensor. LiteSpeed only. H365-IV: Low-profile 135°F fixed thermal sensor. Ivory. LiteSpeedand CLIP mode. H365R: Low-profile, intelligent, rate-of-rise thermal sensor. Lite-Speed only. H365R-IV: Low-profile, intelligent, rate-of-rise thermal sensor. Ivory.LiteSpeed and CLIP mode. H365HT: Low-profile intelligent 190°F/88°C fixed thermal sensor.LiteSpeed only. H365HT-IV: Low-profile intelligent 190°F/88°C fixed thermal sensor.Ivory. LiteSpeed and CLIP mode. Legacy Devices SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector withthermal sensor. SD355R: Remote test capable addressable photoelectric smokedetector for use with DNR(W) duct detector housing. SD355CO: Addressable, low-profile device that provides fire, heat,and carbon monoxide (CO) detection. H355: Fast-response, low-profile heat detector. H355R: Fast-response, low-profile heat detector with rate-of-riseoption. H355HT: Fast-response, low-profile heat detector that activates at190°F/88°C. DF-60953:C • 7/16/2018— Page 3 of 4 AD355: Low-profile, intelligent, “Adapt” multi-sensor detector (B350LP base included). B200S: Programmable, addressable sounder base B200SR: Addressable sounder base. BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitiv-ity test. D355PL: InnovairFlex low-flow non-relay duct-detector housing; includes SD355R. DNR: InnovairFlex low-flow non-relay duct-detector housing. (Order SD355R/SD365R separately.) DNRW: InnovairFlex low-flow non-relay duct-detector housing, with NEMA-4 rating. Watertight. (Order SD355R/SD365R separately.) Addressable Modules MMF-300: Addressable Monitor Module for one zone of normally-open dry-contact initiating devices. Mounts in standard 4.0" (10.16 cm.) box. Includes plastic cover plate and end-of-line resistor. Mod-ule may be configured for either a Style B (Class B) or Style D (Class A) IDC. MDF-300: Dual Monitor Module. Same as MMF-300 except it pro-vides two Style B (Class B) only IDCs. MMF-301: Miniature version of MMF-300. Excludes LED and Style D option. Connects with wire pigtails. May mount in device backbox. MMF-302: Similar to MMF-300. Addressable Monitor Module for one zone of conventional two-wire detectors. Requires resettable 24 VDC power. Refer to the Device Compatibility Document for listed compatible devices and quantity limitation. CMF-300: Addressable Control Module for one Style Y/Z (Class B/A) zone of supervised polarized Notification Appliances. Mounts directly to a 4.0" (10.16 cm.) electrical box. NAC option requires external 24 VDC to power notification appliances. CRF-300: Addressable relay module containing two isolated sets of Form-C contacts, which operate as a DPDT switch. Mounts directly to a 4.0" (10.16 cm.) box, surface mount using the SMB500. BG-12LX: Addressable manual pull station with interface module mounted inside. I300: This module isolates the SLC loop from short circuit conditions (required for Style 6 or 7 operation). ISO-6: Six-fault isolator module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SMB500: Used to mount all modules except MMF-301 and M301. MMF-300-10: Ten-input monitor module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. MMF-302-6: Six-zone interface module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CMF-300-6: Six-circuit supervised control module. Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. CRF-300-6: Six-relay control module (Form-C relays). Mount one or two modules in a BB-2F cabinet (optional). Mount up to six modules on a CHS-6 chassis in a BB-6F cabinet. SWIFT Wireless Devices W-GATE: LiteSpeed Wireless Gateway W-SD355: LiteSpeed intelligent, wireless photo detector. W-H355R: LiteSpeed intelligent wireless rate of rise (135°) heat detector. W-SD355T: intelligent wireless photo/heat detector. W-H355: LiteSpeed intelligent wireless fixed-temperature (135°) heat detector. W-MMF: LiteSpeed Intelligent wireless monitor module. W-CRF: LiteSpeed Intelligent wireless relay module. W-BG12LX: LiteSpeed Intelligent wireless pull station. WAV-RL, WAV-WL,WAV-CRL,WAV-CWL: LiteSpeed Intelligent AV bases. W-USB: Wireless USB radio/antenna dongle that plugs into the USB port of a PC running SWIFT Tools. SWIFT Tools: Programming and diagnostic utility for the Wireless Gateway and devices. Available for download from firelite.com. NOTE: For more information on Compatible Addressable Devices for use with the ES-50X, see the following data sheets (document num- bers): SD365 Series (DF-61010), H365 Series (DF-61011), AD355 (DF-52386), BG-12LX (DF-52013), CMF-300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/CRF Series (DF-52130), CP355 (DF-52383), H355 Series (DF-52385), I300 (DF-52389), ISO-6 (DF-60485), MMF-300 Series/MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF-302-6 (DF-52356), SD355/SD355T (DF-52384), and SLC Wiring Manual (51309). NOTE: Legacy 300 Series detection devices such as the CP300/CP350, SD300(T)/SD350(T) and older modules such as the M300, M301, M302, C304, and BG-10LX are not compatible with LiteSpeed polling. If the SLC contains one of these devices, polling must be set for standard CLIP protocol. Please consult factory for further information on previous 300 Series devices. ADDRESSABLE DEVICE ACCESSORIES End-of-Line Resistor Assembly (R-47K and R-3.9K): The 47k ohm assembly supervises the MMF-300, MDF-300, MMF-301, and CMF-300 module circuits. The 3.9k ohm assembly supervises the MMF-302 module circuit. These resistors are included with each module. Power Supervision Relay: Supervises the power to 4-wire smoke detectors and notification appliances. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interfer-ence. Refer to the panel manual for wiring details. AlarmNet®, Fire-Lite® Alarms, SWIFT®, and System Sensor® are registeredtrademarks of Honeywell International Inc. Microsoft® and Windows® are registeredtrademarks of the Microsoft Corporation. ©2018 by Honeywell International Inc. All rights reserved. Unauthorized use of thisdocument is strictly prohibited. Page 4 of 4 — DF-60953:C • 7/16/2018 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105.www.firelite.com Country of Origin: USA SYSTEM SPECIFICATIONS System Capacity • Intelligent Signaling Line Circuits................................................1 • Addressable device capacity....................................................50 • Programmable software zones.................................................50 • Annunciators.............................................................................16 Electrical Specifications AC Power: Operates in either 120 or 240 VAC, 50/60 Hz, 3.25 A, auto-sensing- no switch required. Wire size: minimum 14 AWG (2.00 mm2) with 600 V insulation. Nonpower-limited, supervised. Battery: Two 12 V 18 AH lead-acid batteries. Battery Charger Capacity: 7-18 AH (ES-50X cabinet holds maximum of two 18 AH batteries.) Communication Loop: Supervised and power-limited. Notification Appliance Circuits: Terminal Block provides connec-tions for two NACs, Style Y (Class B) or Style Z (Class A). Special Application power. Power-limited, supervised circuitry. Maximum signaling current per circuit: 2.5 amps special application, 250mA regulated. End-of-Line Resistor: 4.7k ohm, ½ watt (P/N 71252 UL listed) for Style Y (Class B) NAC; system capable of 1.9 kΩ - 22 kΩ ELR range. Refer to the Fire•Lite Device Compatibility Document for listed compatible devices. Two Programmable Relays and One Fixed Trouble Relay: Con-tact rating: 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive). Form-C relays, non-power-limited, non-supervised. Cabinet Specifications Door: 19.26" (48.92 cm.) high x 16.82" (42.73 cm.) wide x 0.72" (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x 16.65" (42.29 cm.) wide x 5.25" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. Shipping Specifications Weight: 26.9 lbs. (12.20 kg.) Dimensions: 20.00” (50.80 cm.) high x 22.5” (57.15 cm.) wide x 8.5” (21.59 cm.) deep. Temperature and Humidity Ranges This system meets NFPA requirements for operation at 0 – 49°C/32– 120°F and at a relative humidity 93% ± 2% RH (noncondensing) at32°C ± 2°C (90°F ± 3°F). However, the useful life of the system'sstandby batteries and the electronic components may be adverselyaffected by extreme temperature ranges and humidity. Therefore, itis recommended that this system and its peripherals be installed inan environment with a normal room temperature of 15 – 27°C/60 –80°F. NFPA Standards The ES-50X complies with the following NFPA 72 Fire Alarm Sys-tems requirements: – LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervi-sory). – AUXILIARY (Automatic, Manual and Waterflow) (requires4XTMF). – REMOTE STATION (Automatic, Manual and Waterflow)(Where a DACT is not accepted, the alarm, trouble and supervi-sory relays may be connected to UL 864 listed transmitters. Forreverse polarity signaling of alarm and trouble, 4XTMF isrequired.) – PROPRIETARY (Automatic, Manual and Waterflow). – CENTRAL STATION (Automatic, Manual and Waterflow, andSprinkler Supervised). –OT, PSDN (Other Technologies, Packet-switched Data Net-work) – IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seismic). – CBC 2007 (Seismic) Agency Listings and Approvals The listings and approvals below apply to the basic ES-50X controlpanel. In some cases, certain modules may not be listed by certainapproval agencies, or listing may be in process. Consult factory forlatest listing status. •UL: S624 •FM approved •CSFM: 7165-0075:0500 •FDNY: COA #6261 NOTE: See DF-60954 for ULC-listed model. Rechargeable Sealed Lead-Acid Battery PERFORMANCE SPECIFICATIONS Nominal Voltage....................................................................................................................................................... 12 volts (6 cells in series) Nominal Capacity 20 hour rate (350mA to 10.50 volts) ...................................................................................................................................... 7.0 A.H. 10 hour rate (650mA to 10.50 volts) ...................................................................................................................................... 6.5 A.H. 5 hour rate (1.2A to 10.20 volts) .......................................................................................................................................... 6.0 A.H. 1 hour rate (4.5A to 9.00 volts) ........................................................................................................................................... 4.5 A.H. 15 min rate (14A to 9.00 volts) ............................................................................................................................................. 3.5 A.H. Approximate Weight.................................................................................................................................................... 5.70 pounds (2.59 kg) Energy Density (20 hour rate).............................................................................................. 1.43 Watt-hours/cubic inch (87.3 Watt-hours/l) Specific Energy (20 hour rate)................................................................................................. 14.7 Watt-hours/pound (32.4 Watt-hours/kg) Internal Resistance (Fully Charged Battery)................................................................................................... 22 milliohms (approximately) Maximum Discharge Current ( <_ 7 Min.).................................................................................................................................... 21 amperes Maximum Short-Duration Discharge Current ( <_ 10 Sec.)...................................................................................................... 70 amperes Terminal configurations ................................................Quick disconnect tabs, “F1”: 0.187” x 0.032”, mate with AMP. INC. FASTON “187” Quick disconnect tabs, “F2”: 0.250” x 0.032”, mate with AMP. INC. FASTON “250” Shelf Life — % of nominal capacity at 68o F (20o C) 1 Month......................................................................................................................................................................................... 97% 3 Months....................................................................................................................................................................................... 91% 6 Months....................................................................................................................................................................................... 83% Operating Temperature Range Charge................................................................................................................................................................... -4oF (-20oC) to 122oF (50oC) Discharge.............................................................................................................................................................. -4oF (-20oC) to 140oF (60oC) Case................................................................................................................................................................................................. ABS Plastic PS-1270 12 Volt 7.0 Amp. Hrs. Features: Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any position. Power/volume ratio yielding unrivaled energy density. Rugged plastic case and cover Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified. U.L. recognized under file number MH 20845. MODEL PS-1270 F1 12 Volt 7.0 Amp. Hr. Power-Sonic Corporation Sealed Rechargeable Battery BATTERY MUST BE RE CYCLEDPb NONSPILLABLE 120 100 80 60 40 20 0 0 200 400 600 800 1000 1200 Number of Cycles CHARGING Cycle Applications: Limit initial current to 2.1A. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68oF (20oC). Hold at 14.40 to 14.70 volts until current drops to approximately 70mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to “float” voltage. “Float” or “Stand-By” Service: Hold battery across constant volt- age source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. NOTE: Due to the self-discharge characteristics of this type of bat- tery, it is imperative that they be charged after 6-9 months of stor- age, otherwise permanent loss of capacity might occur as a result of sulfation.Terminal Voltage14.0 13.0 12.0 11.0 10.0 9.0 8.0 (V) Ambient Temperature 20oC (68oF) 1.2 2.4 6 12 24 36 48 1 2 4 6 8 10 20 40 Discharge Time min.hrs. Final Voltage 14A 7A 3.5A1.4A 0.7A 0.35A Discharge Time20 15 10 5 2 1 30 10 5 0.35 0.7 1.4 3.5 7 14 Discharge Current (A)min.hrs.Final Voltage 10.5V 10.2V 9.60V 9.0V 8.10V 40oC (104oF) 20oC (68oF) 0oC (32oF) TECHNICAL DATA: PS-1270 Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Physical Dimensions: in. (mm) SALES & MARKETING 3106 Spring Street Redwood City, CA 94063 USA Tel: 650-364-5001 Fax: 650-366-3662 national-sales@power-sonic.com www.power-sonic.com customer-service@power-sonic.com 11/04 1MPRINTED IN U.S.A. CUSTOMER SERVICE 7550 Panasonic Way San Diego, CA 92154 USA Tel: 619-661-2030 Fax: 619-661-3648 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) Shelf Life and Storage Capacity Retention Ratio (%)100 80 60 40 00 2 4 6 8 10 12 14 16 18 20 Standing Period (Months) 40oC (104oF) 30oC (86oF) 20oC (68oF) 5oC (41oF) Charge may fail to restore full capacity. Do not let batteries reach this state. Charging before use is necessary to help recover full capacity. Charging is not necessary unless 100% of capacity is required. Life Characteristics in Stand-By Use Life Characteristics in Cyclic Use Retention Capacity (%)Discharge Characteristics Discharge Time vs. Discharge Current Discharge Depth 30% Discharge Depth 100% Discharge Depth 50%2.56 (65)ISO9001-2000 FM39170 5.95 (151)3.70 (94)3.86 (98)Ambient Temperature 20˚C (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Retention Capacity (%)100 80 60 40 20 0 0 1 2 3 4 Years Terminals FASTON 0.250" x 0.032"quick disconnect tabs. FASTON 0.187" x 0.032" quick disconnecttabs. "F1" Equipment Panel/Dedicated Circuit Surge Protector General Product Specifications DTK-HW Series DTK-120HW DTK-120/240HW DTK-240HW Product Features • Diagnostic LED indicates ground presence, system power and SPD function • Small footprint enables installation in a variety of locations • Available for popular 120V, 120/240V and 240V single-phase systems •Ten Year Limited Warranty One DITEK Center 1720 Starkey Road Largo, FL 33771 1-800-753-2345 Technical Support: 1-888-472-6100 www.ditekcorp.com Document: SPS-100057-001 Rev 3 08/08 ©2008 DITEK Corp. Specification Subject to Change Specifications Agency Approvals: UL 1449, 2nd Edition 2007, cUL (DTK-120HW) IEEE Location Categories: Cat. A & Cat. B Suppressor Type: Parallel configuration, external mount Peak Surge Current: 22,500A (DTK-120HW) 27,000A (DTK-120/240HW) 13,500A (DTK-240HW) Protection Modes: L-G, L-N, N-G Temperature Range:-40C to +85C Operating Frequency: 0Hz – 400Hz Dimensions: 2.9” x 1.6” x 2.1” (73.7mm x 40.6mm x 53.3mm) Weight: .5lb. (227g) Housing: NEMA 4 ABS n/a250V240VAC240HW n/a130V/250V120/240VAC120/240HW 400V130V120VAC120HW UL 1449, 2nd Ed. S.V.R.MCOV System Voltage Model Selection: DTK- DITEK’s HW series of surge protection are designed and manufactured to meet the exacting standards of the life safety industry. These compact parallel mount surge protectors are widely used to protect fire alarm panels and other dedicated branch circuit loads. DITEK’s Low Voltage Line Protector series of signal, data and loop circuit surge protectors provide strong protection in a compact hard wire package. Applications include protection of 4-20mA current loops, alarm panel NAC, SLC and IDC loops, and burglar alarm panels. Models are available to protect 1, 2, 4 or 8 pairs. LVLAWG models can handle #14-#10 AWG wiring connections. LVLP SeriesVoice, Data and Signaling Circuit Surge Protection General Product Specifications Selection Guide DTK- # #LVL# # # SAD-Based: “Z” Number of Pairs:: 1, 2, 4, 8 Wire Gauge: “P” for #22-16, “AWG” for #14-10 Sneak Current Protection: .15A current, “SCP” Voltage Level: D, X, LV, OPX, SPK, SGR, RUV (see table below for voltage ranges) DTK-4LVLPD DTK-LVLP Application Features • Series connection, parallel function adds no resistance to loop circuits • Protect 1, 2, 4 or 8 pairs to match your configuration needs • Seven voltage levels available to protect all types of voice/data/loop applications • “SCP” model provides automatically resetting fusing and sneak current protection Specifications Performance Data Agency Approvals: UL497B, UL497A Connection Method: #22-#16 AWG screw terminals (LVLP), #14-#10 AWG screw terminals (LVLAWG) Max Continuous Current: 5 Amps, 0.15 Amps (-SCP) Max Surge Current: 2,000 Amps per pair (6V-50V) 9,000 Amps per pair (75V-130V) Protection Modes: Line-Ground (All) Operating Temperature: -40°F - 158°F (-40°C - 70°C) Maximum Humidity: 95% non-condensing Dimensions: 1LVL-4LVL – 1.6”H x 3.0”W x 1.6”D (41mm x 76mm x 41mm) 8LVL – 1.5”H x 4.8”W x 2.3”D (35mm x 122mm x 58mm) Weight: 4oz (113g) Housing: ABS Warranty: Ten Year Limited Warranty Accessories: DIN Rail Kit – Part Number DTK-DRK Example: DTK-4LVLPSCPD Example: DTK-8LVLAWGRUV Example: DTK-Z4LVLPLV Model DTK-LVL# Service Voltage MCOV 0-6 V 8VDC 18VDC 38VDC 66VDC 102VDC 127VDC 175VDC 14 V 30 V 50 V 75 V 95 V 130 V Clamp Voltage D 12V X 22V LV 47V OPX 82V SPK 120V SGR 150V RUV 204V One DITEK Center 1720 Starkey Road Largo, FL 33771 Doc. Number: SPS-100030-001 Rev 2 9-07 ©2007 DITEK Corp. Specification Subject to Change 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com November 7th, 2022 Atlantic Beach Zoning Department (Fire Permitting) 800 Seminole Rd. Atlantic Beach FL 32233 Attn: Fire Permitting Associated Building Permit: Standalone Repair Permit Customer: Panera LLC 3630 S. Geyer Rd. Sunset Hills. MO 63127     Site: Panera Bread #1781  899 Atlantic Blvd.  Atlantic Beach, FL 32233  To whom it may concern: I am writing this letter to request a repair Fire Alarm permit for the above referenced job. (Call #649981) Wayne Automatic Fire Sprinklers Inc. (WAFS) to replace (1) existing addressable Firelite MS-9050UD with new addressable Firelite ES-50x, also (2) new 7AH batteries, and (1) high and (1) low voltage surge protector located at Panera Bread #1781 due to faults found on system during service call. Current Firelite MS-9050 is no longer manufactured and new addressable panel is equivalent with previous model. Note: Existing initiating and indicating devices to remain and all devices are compatible with new Firelite system. A final inspection will be requested immediately upon completion of this work AHJ to be sent test certificate paperwork. If I can be of any assistance or you have any question, please call me 904-861-1181. Thank you, Seth Stephens Sprinkler and Alarm Service Designer srstephens@waynefire.com Wayne Automatic Fire Sprinklers Inc. 11326 Distribution Avenue W. Jacksonville, FL 32256