808 AMBERJACK LN RES24-0044 FL23157_R2_II_SS FL 23157.1 REPORT AND INSTALL DETAILS REV 5-16-24i>P, C-CL;\0'
P E T E R S E N
Product Report Manufacturer: Petersen Aluminum Corporation
102 Northpoint Parkway
Building 106
Acworth, GA 30102
(BOO) 272-4482
Florida Product Approval# 231S7 Soffit Panels NON-HVHZ
Compliant with Florida Building Code 2023 (8th ed.) FBC 2023 Sec. 1709.10, Sec. 1404.5, Sec. 1405.2,
1405.11 Compliant with Florida Product Approval Rule # 61620-3
Compliant Quality Assurance Program: UL LLC
FL 23157.1 Product: Flush Panel (0.032") 12" wide x 0.032" Aluminum Soffit Panel NON-HVHZ
Attached to 16GA support member or equivalent substrate secured with fasteners through the long lap leg,
and side lap stitch fasteners In vertical legs. FBC Sec. 1405.11.1 & .2 Corrosion Resistant, additional
requirement of (4) fasteners If the area supported exceeds (4) square feet. Panels are 12" wide with 1" right
angle vertical legs, configured with nesting capabilities. Corrosion Resistant Compliant Fastener #10 x 1"
Pancake Head fastened at each support to 16 GA Zeebar substrate or equivalent, #14 x 7/8" stitch lap
fastener at 24" o.c. No pressure equalization factors have been used In analysis and panel may be used as a
wall panel. Applicable load tables are included from testing and Petersen Aluminum Corporation.
MATERIAL: .032"AWM .040" ALUM 24GASTEEL 22GASTEEL
PANEL SP ANS: 12" 48" 12" 48" 24• 60" 24" 60"
ULTIMATE PSF LOAD/ -80/-40 -50/-25 -290/-145 -80/-40 -165/-82.5 -100/-50 -210/-105 -140/-70
2.0 SAFTEY FACTOR*
Limitations and Conditions of Use:
1.Products herein this report are compliant with current Florida Building Code (FBC)2023 9TH ed.
2.Install in compliance with FBC 2023., Install per Manufacturer's installation reference.
3.Product compliant for State of Florida product approval per Rule 61G20-3. Compliance Method: 1-0
4.Engineering analysis for "project specific project �pproval" to determine appropriate wind safety
factors; is allowed by other Florida licensed professionals.
5.Fire classification is not part of this acceptance. Shear diaphragm values are outside this report.
6.Support framing compliant w/FBC 2023 8th ed., Chapter 22 for Steel, Chapter 23 for Wood and Chapter
16 for Structural Loading.
7.This report does not imply warranty, installation, recommended product use outside of this report.Test References:
Fenestration Testing Lab TST 1657 Test # 7584-A ASTM 1592-051( 2005)
EQUIVALENCY: ASTM E 1592-05, test standards are equivalent to ASTM E 1592-2015 test standards
Certificate of Independence:
Locke Bowden, P.E. does not have, not will acquire a financial interest in any company manufacturins or
distributing products under this evaluation. ,,,,,1111,,,,,, '' O BO ,,, ,,'�1� . i,v,'/) ,,,, Locke Bowden, P .E. is not owned, operated or controlled
by any company manufacturing or distributing products
under this report.
...... fv'f:"-
•
•
•
•
•
•
� ,,. $' 0 • \)CENS£' • • 1,, � � .......,,_. ·. � f: N°Btl •• ��
:�-. � -�· p ·�-<1/J .? ; �··. STATE Of ..-�J o L 1 q 2..-y
\_ 0� • • .�l ORIO!• �&�l ,,. �s ••••• t:� '""
,,,,,, °SIONA\. ';,.,.,,' ,,,,,,.111"'''
PAC-CLAD FLUSH PANEL r.05/14
#10 PANCAKE HEAD FASTENER@ EACH SUPPORT
16GA SUPPORT EQUIV IL ENT
PAC-CLAD 12• FLUSH PANEL
#14 X 7/8" LAP FASTENER@ 24" 0/C
ATTACHMENT DETAIL
...L__ 1.0� 7=�--r L 12.aaao-----1-
□1MENs10Ns
ISOMETRIC VIEW
Petersen Aluminum Corporation
102 Northpolnt Parkway Building 106Acworth GA 30102Toll Free: 800-272-4482
Fax: 770-420-2533
www.pac-clad.com
*optional pencil ribs available