299 Atlantic Blvd MECH25-0011 PermitOWNER:ADDRESS:CITY:STATE:ZIP:
SOUTHCOAST CAPITAL
PRTNSHIP LTD 241 ATLANTIC BLVD JACKSONVILLE FL 32202-5018
COMPANY:ADDRESS:CITY:STATE:ZIP:
ANGLER HEATING & AIR
INC.2071 EMERSON ST 12 JACKSONVILLE FL 32207
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
172531 0000 ATLANTIC BEACH
TERRACE
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
299 ATLANTIC BLVD MECHANICAL COMMERCIAL
SEPARATE PLANS HVAC COMMERCIAL HOODS $5000.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
COMMERCIAL HOOD INSTALLATION 455-0000-322-1000 0 $30.00
FIRE DEPT REVIEW 455-0000-208-0800 0 $125.00
MECHANICAL BASE FEE 455-0000-322-1000 0 $55.00
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 2Issued Date: 11/7/2025
PERMIT NUMBER
MECH25-0011
ISSUED: 11/7/2025
EXPIRES: 5/6/2026
MECHANICAL COMMERCIAL
SEPARATE PLANS PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL: $214.00
2 of 2Issued Date: 11/7/2025
PERMIT NUMBER
MECH25-0011
ISSUED: 11/7/2025
EXPIRES: 5/6/2026
MECHANICAL COMMERCIAL
SEPARATE PLANS PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
DESCRIPTION ACCOUNT QTY PAID
PermitTRAK $214.00
MECH25-0011 Address: 299 ATLANTIC BLVD APN: 172531 0000 $214.00
FIRE DEPARTMENT FEE $125.00
FIRE DEPT REVIEW 455-0000-208-0800 0 $125.00
MECHANICAL $85.00
MECHANICAL BASE FEE 455-0000-322-1000 0 $55.00
COMMERCIAL HOOD INSTALLATION 455-0000-322-1000 0 $30.00
STATE SURCHARGES $4.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL FEES PAID BY RECEIPT: R32587 $214.00
Printed: Friday, November 7, 2025 4:30 PM
Date Paid: Friday, November 07, 2025
Paid By: ANGLER HEATING & AIR INC.
Pay Method: CREDIT CARD 4
1 of 1
Cashier: SA
Cash Register Receipt
City of Atlantic Beach
Receipt Number
R32587
Jacksonville Office
REGION 65
PHONE: (904) 463 - 6242
EMAIL: reg65@captiveaire.com
FOR QUESTIONS, CALL THE
HOOD INFORMATION - JOB#8323822
1
3624
ES-VHB
ECON-AIR 5' 0"
700
DEG
II N/A 150 750 4"10"750 1375 -0.113"
430 SS
100%
ALONE ALONE
HOOD
NO
TAG MODEL MANUFACTURER LENGTH
MAX
COOKING
TEMP
TYPE
APPLIANCE
DUTY
DESIGN
CFM/FT
TOTAL
EXH CFM
EXHAUST PLENUM
RISER(S)
WIDTH LENG HEIGHT DIA CFM VEL SP
HOOD
CONSTRUCTION
HOOD CONFIG
END TO
END
ROW
HOOD INFORMATION
1 0 NO
141
LBS
HOOD
NO
TAG
FILTER(S)
TYPE QTY HEIGHT LENGTH
EFFICIENCY
@ 7
MICRONS
LIGHT(S)
QTY TYPE
WIRE
GUARD
UTILITY CABINET(S)
LOCATION SIZE
FIRE SYSTEM
TYPE SIZE
ELECTRICAL
MODEL #
SWITCHES
QUANTITY
FIRE
SYSTEM
PIPING
HOOD
HANGING
WEIGHT
5' 0"NOM./5' 0.00"OD.
36"
§
30"30"
18"
∅10"
PLAN VIEW - HOOD #1
5' 0.00" LONG 3624ES-VHB
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL ALL-THREAD.
HOOD CORNER
HANGING ANGLE
(WEIGHT BEARING
ANCHOR POINT
FOR HOOD).
HOOD CORNER
HANGING ANGLE
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
ASSEMBLY INSTRUCTIONS
HANGING ANGLE MUST BE SUPPORTED WITH 1/2" - 13 TPI
GRADE 5 (MINIMUM) ALL-THREAD. SANDWICH HANGING
ANGLES AND CEILING ANCHOR POINTS WITH 1/2" GRADE 5
(MINIMUM) STEEL FLAT WASHERS AND 1/2" - 13 TPI
GRADE 5 (MINIMUM) HEX NUTS AS SHOWN. MUST USE
DOUBLED HEX NUT CONFIGURATION BENEATH HOOD HANGING
ANGLES AND ABOVE CEILING ANCHORS. MAINTAIN 1/4" OF
EXPOSED THREADS BENEATH BOTTOM HEX NUT. TORQUE
ALL HEX NUTS TO 57 FT-LBS.
(HARDWARE BY INSTALLER)
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
FULL LENGTH
HANGING ANGLE
(WEIGHT BEARING
ANCHOR POINT
FOR HOOD).
FULL LENGTH
HANGING ANGLE
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL ALL-THREAD.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
ASSEMBLY INSTRUCTIONS
HANGING ANGLE MUST BE SUPPORTED WITH 1/2" - 13 TPI
GRADE 5 (MINIMUM) ALL-THREAD. SANDWICH HANGING
ANGLES AND CEILING ANCHOR POINTS WITH 1/2" GRADE 5
(MINIMUM) STEEL FLAT WASHERS AND 1/2" - 13 TPI
GRADE 5 (MINIMUM) HEX NUTS AS SHOWN. MUST USE
DOUBLED HEX NUT CONFIGURATION ABOVE CEILING
ANCHORS. SINGLE HEX NUT BENEATH HANGING ANGLE IS
ACCEPTABLE FOR FULL LENGTH HANGING ANGLES.
MAINTAIN 1/4" OF EXPOSED THREADS BENEATH BOTTOM
HEX NUT. TORQUE ALL HEX NUTS TO 57 FT-LBS.
(HARDWARE BY INSTALLER)
SEE HOOD TABLE.
§
EXHAUST RISER.
HANGING ANGLE.
EQUIPMENT
BY OTHERS.
80"
24" NOM.
36"
*24"
*24" CLEARANCE ABOVE HOOD
RECOMMENDED FOR SERVICEABILITY.
SECTION VIEW - MODEL 3624ES-VHB
HOOD - #1
IT IS THE RESPONSIBILITY
OF THE ARCHITECT/OWNER TO
ENSURE THAT THE HOOD CLEARANCE
FROM LIMITED-COMBUSTIBLE
AND COMBUSTIBLE MATERIALS
IS IN COMPLIANCE WITH
LOCAL CODE REQUIREMENTS.
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
1
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
EXHAUST FAN INFORMATION - JOB#8323822
1 1 DU33HFA CAPTIVEAIRE 700 0.500 1270 TEAO-ECM 0.333 0.1360 1 115 4.3 347 FPM 65 11.2
FAN
UNIT
NO
TAG QTY FAN UNIT MODEL #MANUFACTURER CFM ESP RPM
MOTOR
ENCL
HP BHP PHASE VOLT FLA
DISCHARGE
VELOCITY
WEIGHT
(LBS)
SONES
CURB ASSEMBLIES
1 # 1 50 LBS CURB
19.500"W X 19.500"L X 24.000"H 0.375:12.000 PITCH ALONG LENGTH, RIGHT VENTED
16 GAUGE.
NO
ON
FAN
WEIGHT ITEM SIZE
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
2
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
FAN OPTIONS
FAN
UNIT
NO
TAG QTY DESCRIPTION
1
1 FAN BASE CERAMIC SEAL - DU/DR30/33HFA - INSTALLED AT PLANT - FOR GREASE DUCTS
1
ECM WIRING PACKAGE - EXHAUST - MANUAL OR 0-10VDC REFERENCE SPEED CONTROL -MSC-
(TELCO), CCW ROTATION
1 MIAMI DADE CERTIFICATION - NOA-1 ALUMINUM UPBLAST
1 SCR-11 BIRD SCREEN
1 2 YEAR PARTS WARRANTY
MIAMI-DADE NOA1 ALUMINUM UP-BLAST FANS
INSTALLATION FASTENER TYPES
FAN TO CURB WOOD (SG = 0.42
MIN.)STEEL (12 GAUGE MIN.)
CONCRETE (2500 PSI
MIN. CRACKED
CONCRETE)
FASTENER
5/16"-18 X 2" SELF
DRILLING SCREW (ELCO
DRIL-FLEX OR BETTER)
3/8" DIA. ZINC
PLATED LAG BOLT
1/4"-14 DRIL-FLEX SELF
DRILLING SCREW
3/8" DIA. SS HILTI
KWIK BOLT TZ
EXPANSION ANCHOR
MINIMUM THREAD
PENETRATION N/A 2-1/2"12 GAUGE 2"
MINIMUM EDGE
DISTANCE N/A 1-1/2"3/8"3"
MINIMUM END
DISTANCE N/A 2-5/8"3/8"3"
MINIMUM SPACING N/A 1-1/2"3/4"5-1/2"
INSTALLATION FASTENER QTY
CURB TO FAN
(ROOF)
CURB TO FAN
(WALL)
WOOD (ROOF)WOOD (WALL)STEEL (ROOF)
STEEL
(WALL)
CONCRETE
(ROOF)
CONCRETE
(WALL)
FAN MODEL PER SIDE
TOTA
L
PER SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTAL
PER
SIDE
TOTA
L
DU33 3 12 3 12 3 12 3 12 4 16 4 16 3 12 3 12
DESIGN PRESSURE: +150.0 / -150.0 PSF.
LARGE MISSILE IMPACT RESISTANT.
GENERAL NOTES:
1. THIS APPROVAL IS FOR THE STRUCTURAL CAPACITY AND IMPACT RATING OF THE EXTERIOR
HOUSING ONLY; IT DOES NOT INCLUDE ANY INTERIOR MECHANISM OR ELECTRICAL PART.
2. THESE FANS HAVE NOT BEEN WIND TESTED FOR WIND DRIVEN RAIN TEST PER FLORIDA
BUILDING CODE, TAS100 (A)-95.
3. TESTED IN ACCORDANCE TO FLORIDA BUILDING CODE TEST PROTOCOL TAS201, TAS202, TAS203.
4. TESTED FOR AREAS INCLUDING HIGH VELOCITY HURRICANE ZONES.
5. TESTED UNDER MIAMI-DADE COUNTY NOTIFICATION NUMBER ATI-08033.
CURB MATERIAL:
20" HIGH & LESS = 20 GA. STEEL.
ABOVE 20" THRU 42" = 16 GA. STEEL.
1
2
INSTALLATION INSTRUCTIONS:
1. SECURE LID TO FAN USING (8)
1/4"-14 X 1" ZINC PLATED STEEL SELF
DRILLING SHEET METAL SCREWS WITH
RUBBER WASHER SPACED EVENLY
AROUND LID.
2. SECURE FAN BASE TO CURB USING
1/4"-14 X 2" GALVANIZED SELF DRILLING
SCREWS (A307 OR BETTER) THROUGH
PRE-PUNCHED HOLES IN THE FAN BASE.
(SEE TABLE BELOW FOR QTY).
3. SECURE CURB TO ROOF OR WALL BY
DRILLING 1/4" DIA PILOT HOLES IN THE CURB
FLANGE AT LOCATIONS SHOWN IN THE
DIAGRAM. SEE TABLE BELOW FOR FASTENER
TYPE. USE TABLE BELOW FOR FASTENER QTY.
3
FULLY WELDED CURB CORNERS
(ABOVE 20" HEIGHT).
MAX CURB
HEIGHT 42".
MIN END DISTANCE.
MIN SPACING.
MIN EDGE DISTANCE.
MIAMI-DADE COUNTY -
CURB ROOF INSTALLATION GUIDE
ROOF OPENING.
MIN EDGE
DISTANCE.
MIN END
DISTANCE.
MIN SPACING.
ROOF SUBSTRATE.
CURB.
WOOD: SG =0.42 MIN.
CONCRETE: 2500 PSI MIN.
STEEL: 12 GAUGE MIN.
CURB.
WOOD: 4 X JOIST MIN SG = 0.42 MIN.
STEEL: 12 GAUGE TRUSS MIN.
ROOF OPENING.
A
DETAIL A
SEE SPECIFIC FAN MODEL
FASTENER TABLES FOR
FASTENER TYPE AND QTY.
WASHER (STEEL ZINC PLATED)
FOR SCREW SIZES 3/8" TYP.
CURB.
1/4" PILOT
HOLE.
WALL SUBSTRATE.
1/4" PILOT HOLE.
ROOF OPENING.
A
DETAIL A
CURB.
MIN EDGE
DISTANCE.
STEEL: 12 GAUGE TRUSS MIN.
WOOD: 4X JOIST MIN SG = 0.42.
STEEL: 12 GAUGE MIN.
CONCRETE: 2500 PSI MIN.
WOOD: SG = 0.42 MIN.
WALL SUBSTRATE:
FASTENER TYPE AND QTY.
FASTENER TABLES FOR
SEE SPECIFIC FAN MODEL
FOR SCREW SIZE 3/8" TYP.
WASHER (STEEL ZINC PLATED)
ROOF
OPENING.
MIN SPACING.
MIN END
DISTANCE.
MIN EDGE
DISTANCE.
WALL CURB INSTALLATION GUIDE
MIAMI-DADE COUNTY -
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
3
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
- VARIABLE SPEED CONTROL.
- THERMAL OVERLOAD PROTECTION (SINGLE PHASE).
- HIGH HEAT OPERATION 300°F (149°C).
EXHAUST FAN MUST OPERATE CONTINUOUSLY
WHILE EXHAUSTING AIR AT 300°F (149°C)
UNTIL ALL FAN PARTS HAVE REACHED
THERMAL EQUILIBRIUM, AND WITHOUT ANY
DETERIORATING EFFECTS TO THE FAN WHICH
WOULD CAUSE UNSAFE OPERATION.
NORMAL TEMPERATURE TEST
19"
21"
25 1/2"
12 1/8"
2"
18 1/2"
- INTERNAL WIRING.
- ROOF MOUNTED FANS.
- RESTAURANT MODEL.
FEATURES:
- DIRECT DRIVE CONSTRUCTION (NO BELTS/PULLEYS).
TOP VIEW
25 1/2"
21"
- NEMA 3R SAFETY DISCONNECT SWITCH.
DUCTWORK BETWEEN
EXHAUST RISER ON HOOD
AND FAN (BY OTHERS).
25 1/4"
- UL705
FAN #1 DU33HFA - EXHAUST FAN
OPTIONS
- FAN BASE CERAMIC SEAL -
DU/DR30/33HFA - INSTALLED AT
PLANT - FOR GREASE DUCTS.
- ECM WIRING PACKAGE -
EXHAUST - MANUAL OR 0-10VDC
REFERENCE SPEED CONTROL
-MSC- (TELCO), CCW ROTATION.
- MIAMI DADE CERTIFICATION -
NOA-1 ALUMINUM UPBLAST.
- SCR-11 BIRD SCREEN.
- 2 YEAR PARTS WARRANTY.
3" FLANGE.
19"
19"
ROOF OPENING
DIMENSIONS.
16 GAUGE
CONSTRUCTION.
STEEL
24"
19 1/2"
19 1/2"
VENTED
CURB.
EXAMPLE: 7/12 PITCH = 30° SLOPE.
PITCHED CURBS ARE AVAILABLE
FOR PITCHED ROOFS.
SPECIFY PITCH:
3/8"
2°
12"
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
4
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
GREASE DUCT & CHIMNEY SPECIFICATIONS:
PROVIDE GREASE DUCT EQUAL TO CAPTIVEAIRE SYSTEMS MODEL "DW"
ROUND 20 GAUGE 430 STAINLESS STEEL DUCTWORK. MODEL "DW"
IS LISTED TO UL-1978 AND IS INSTALLED USING "V" CLAMP LOCKING
CONNECTIONS SEALED WITH 3M FIRE BARRIER 2000 PLUS. MODEL "DW"
DOES NOT REQUIRE WELDING PROVIDING IT HAS BEEN INSTALLED PER
THE MANUFACTURES INSTALLATION GUIDE.
PROVIDE RATED ACCESS DOORS AT EVERY CHANGE IN DIRECTION AND EVERY 12' ON CENTER.
PER MANUFACTURES LISTING MODEL "DW" HORIZONTAL RUNS LESS THAN 75 FT. CAN BE
SLOPED 1/16" PER 12", HORIZONTAL RUNS MORE THAN 75 FT. CAN BE SLOPED 3/16" PER 12".
DUCT SHOULD BE SLOPED AS MUCH AS POSSIBLE TO REDUCE THE CHANCE OF GREASE
ACCUMULATION IN HORIZONTAL RUNS.
IF THE DUCT OR CHIMNEY IS WITHIN 18 INCHES OF COMBUSTIBLE MATERIAL, PROVIDE
UL-2221 OR UL-103 HT LISTED DOUBLE WALL GREASE DUCT OR DOUBLE WALL CHIMNEY
EQUAL TO CAPTIVEAIRE SYSTEMS MODEL "DW- 2R, 2R TYPE HT, 3R, OR 3Z" ROUND 20 GAUGE
430 STAINLESS INNER DUCT INSULATED WITH A 24 GAUGE 430 STAINLESS OUTER SHELL.
§
CUSTOMER APPROVAL TO MANUFACTURE:
APPROVED AS NOTED
APPROVED WITH NO EXCEPTION TAKEN
REVISE AND RESUBMIT
SIGNATURE
YOUR TITLE DATE
LISTED GREASE DUCT.
EXHAUST FAN.
§
HIGH TEMP GASKET IS USED
TO SEAL THE FAN TO THE
TRANSITION PLATE.
VENTED CURB
ROOF TERMINATION.
THE INNER DUCT IS FULLY WELDED
TO THE TRANSITION PLATE, ALL
WELDS ARE DYE TESTED.
SECURED TO THE
CURB BY OTHER.
*NOTE: UL 762 INSTALL.
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
5
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
MECHANICAL PERMIT APPLICATION
City of Atlantic Beach Building Department
800 Seminole Road, Atlantic Beach, FL 32233
Phone: (904)247-5826 Email: Building-Dept@coab.us
JOB ADDRESS Q'79 M*/ah-'ic ,G'l/J c ; ve -x i
/4rlan.. e BQaoh- -fl 3,zaS 3
q NEW AIR CONDITIONING & HEATING SYSTEM INSTALLATION ARI # (REQUIRED)
FOR INTERNAL OFFICE USE ONLY
PERMIT #
•BALL information required to process
PROJECT VALUE $~5,doO
00
q Air Handling Equipment Only q Condenser Only q Air Handling Unit & Condenser
Air Conditioning: Unit Quantity Tons per Unit
BTU's per Unit Heat:
Duct Systems:
Unit Quantity
Total CFM Seer Rating (REQUIRED)
q REPLACEMENT AIR CONDITIONING & HEATING SYSTEM INSTALLATION ARI #(REQUIRED)
q Air Handling Equipment Only q Condenser Only q Air Handling Unit & Condenser
Air Conditioning: Unit Quantity Tons per Unit
Heat: Unit Quantity BTU's per Unit
Duct Systems: Total CFM Seer Rating (REQUIRED)
q FIRE PREVENTION
Fire Sprinkler System
Fire Standpipe
Underground Fire Main
Fire Hose Cabinets
Commercial Hoods
Fire Suppression Systems
q ALL OTHER GAS PIPING
Quantity of Outlets
# Vented Wall Furnaces
# Water Heaters
Fireplace
q Other:
Quantity
Quantity
Value
Quantity
Quantity l- £33(gsr 2- Vt&tf (Requires 1 set of digital plans)
Quantity d1O(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
q MISCELLANEOUS
Generator
Gas Tanks
Pre-fabricated Fireplace
Solar Collection Systems
NOTICE: Permit becomes expired if work does not commence within a six month period or work is suspended or abandoned for six
months. All provisions of laws and ordinances governing this work will be complied with whether specified or not. The permit does not
give authority to violate the provisions of any other state or local law regulation construction or the performance of construction.
PROPERTY OWNER Name
q
MECHANICAL COMPANY Name /4y/e' m414417 : i t c
Address (2t7/ EMEKsOta. £4- S.,' L City 'JeGCahVI/CQ
License Holder J3'S 106 ~f/O{-' State Certification # L: .'*?Qc/ 7o6i 3 Email
Phone
Phone 9Dy- &83 9wt
State ft Zip 322 cl
'N'dq~ f -
Lbwl
"In lieu of signed, sworn and notarized signatures of the property owner, agent and/or contractor, and under penalties of
perjury, I dgclare t have read and examined the foregoing application and that the facts stated in it are true and correct."
l tngt,O t ',cM-
SIGNATURE OF CONTRACTOR PRINT OR TYPE NAME OF CONTRACTOR
S
DATE
Mechanical Permit Application 02.25.2 025
MECH25-0011
Jacksonville Office
REGION 65
PHONE: (904) 463 - 6242
EMAIL: reg65@captiveaire.com
FOR QUESTIONS, CALL THE
HOOD INFORMATION - JOB#8323822
1
3624
ES-VHB
ECON-AIR 5' 0"
700
DEG
II N/A 150 750 4"10"750 1375 -0.113"
430 SS
100%
ALONE ALONE
HOOD
NO
TAG MODEL MANUFACTURER LENGTH
MAX
COOKING
TEMP
TYPE
APPLIANCE
DUTY
DESIGN
CFM/FT
TOTAL
EXH CFM
EXHAUST PLENUM
RISER(S)
WIDTH LENG HEIGHT DIA CFM VEL SP
HOOD
CONSTRUCTION
HOOD CONFIG
END TO
END
ROW
HOOD INFORMATION
1 0 NO
141
LBS
HOOD
NO
TAG
FILTER(S)
TYPE QTY HEIGHT LENGTH
EFFICIENCY
@ 7
MICRONS
LIGHT(S)
QTY TYPE
WIRE
GUARD
UTILITY CABINET(S)
LOCATION SIZE
FIRE SYSTEM
TYPE SIZE
ELECTRICAL
MODEL #
SWITCHES
QUANTITY
FIRE
SYSTEM
PIPING
HOOD
HANGING
WEIGHT
5' 0"NOM./5' 0.00"OD.
36"
§
30"30"
18"
∅10"
PLAN VIEW - HOOD #1
5' 0.00" LONG 3624ES-VHB
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL ALL-THREAD.
HOOD CORNER
HANGING ANGLE
(WEIGHT BEARING
ANCHOR POINT
FOR HOOD).
HOOD CORNER
HANGING ANGLE
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
ASSEMBLY INSTRUCTIONS
HANGING ANGLE MUST BE SUPPORTED WITH 1/2" - 13 TPI
GRADE 5 (MINIMUM) ALL-THREAD. SANDWICH HANGING
ANGLES AND CEILING ANCHOR POINTS WITH 1/2" GRADE 5
(MINIMUM) STEEL FLAT WASHERS AND 1/2" - 13 TPI
GRADE 5 (MINIMUM) HEX NUTS AS SHOWN. MUST USE
DOUBLED HEX NUT CONFIGURATION BENEATH HOOD HANGING
ANGLES AND ABOVE CEILING ANCHORS. MAINTAIN 1/4" OF
EXPOSED THREADS BENEATH BOTTOM HEX NUT. TORQUE
ALL HEX NUTS TO 57 FT-LBS.
(HARDWARE BY INSTALLER)
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
FULL LENGTH
HANGING ANGLE
(WEIGHT BEARING
ANCHOR POINT
FOR HOOD).
FULL LENGTH
HANGING ANGLE
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL ALL-THREAD.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUTS.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
1/2" - 13 TPI
GRADE 5 (MINIMUM)
STEEL HEX NUT.
1/2" GRADE 5
(MINIMUM) STEEL
FLAT WASHER.
ASSEMBLY INSTRUCTIONS
HANGING ANGLE MUST BE SUPPORTED WITH 1/2" - 13 TPI
GRADE 5 (MINIMUM) ALL-THREAD. SANDWICH HANGING
ANGLES AND CEILING ANCHOR POINTS WITH 1/2" GRADE 5
(MINIMUM) STEEL FLAT WASHERS AND 1/2" - 13 TPI
GRADE 5 (MINIMUM) HEX NUTS AS SHOWN. MUST USE
DOUBLED HEX NUT CONFIGURATION ABOVE CEILING
ANCHORS. SINGLE HEX NUT BENEATH HANGING ANGLE IS
ACCEPTABLE FOR FULL LENGTH HANGING ANGLES.
MAINTAIN 1/4" OF EXPOSED THREADS BENEATH BOTTOM
HEX NUT. TORQUE ALL HEX NUTS TO 57 FT-LBS.
(HARDWARE BY INSTALLER)
SEE HOOD TABLE.
§
EXHAUST RISER.
HANGING ANGLE.
EQUIPMENT
BY OTHERS.
80"
24" NOM.
36"
*24"
*24" CLEARANCE ABOVE HOOD
RECOMMENDED FOR SERVICEABILITY.
SECTION VIEW - MODEL 3624ES-VHB
HOOD - #1
IT IS THE RESPONSIBILITY
OF THE ARCHITECT/OWNER TO
ENSURE THAT THE HOOD CLEARANCE
FROM LIMITED-COMBUSTIBLE
AND COMBUSTIBLE MATERIALS
IS IN COMPLIANCE WITH
LOCAL CODE REQUIREMENTS.
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
1
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
EXHAUST FAN INFORMATION - JOB#8323822
1 1 DU33HFA CAPTIVEAIRE 700 0.500 1270 TEAO-ECM 0.333 0.1360 1 115 4.3 347 FPM 65 11.2
FAN
UNIT
NO
TAG QTY FAN UNIT MODEL #MANUFACTURER CFM ESP RPM
MOTOR
ENCL
HP BHP PHASE VOLT FLA
DISCHARGE
VELOCITY
WEIGHT
(LBS)
SONES
CURB ASSEMBLIES
1 # 1 50 LBS CURB
19.500"W X 19.500"L X 24.000"H 0.375:12.000 PITCH ALONG LENGTH, RIGHT VENTED
16 GAUGE.
NO
ON
FAN
WEIGHT ITEM SIZE
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
2
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
FAN OPTIONS
FAN
UNIT
NO
TAG QTY DESCRIPTION
1
1 FAN BASE CERAMIC SEAL - DU/DR30/33HFA - INSTALLED AT PLANT - FOR GREASE DUCTS
1
ECM WIRING PACKAGE - EXHAUST - MANUAL OR 0-10VDC REFERENCE SPEED CONTROL -MSC-
(TELCO), CCW ROTATION
1 MIAMI DADE CERTIFICATION - NOA-1 ALUMINUM UPBLAST
1 SCR-11 BIRD SCREEN
1 2 YEAR PARTS WARRANTY
MIAMI-DADE NOA1 ALUMINUM UP-BLAST FANS
INSTALLATION FASTENER TYPES
FAN TO CURB WOOD (SG = 0.42
MIN.)STEEL (12 GAUGE MIN.)
CONCRETE (2500 PSI
MIN. CRACKED
CONCRETE)
FASTENER
5/16"-18 X 2" SELF
DRILLING SCREW (ELCO
DRIL-FLEX OR BETTER)
3/8" DIA. ZINC
PLATED LAG BOLT
1/4"-14 DRIL-FLEX SELF
DRILLING SCREW
3/8" DIA. SS HILTI
KWIK BOLT TZ
EXPANSION ANCHOR
MINIMUM THREAD
PENETRATION N/A 2-1/2"12 GAUGE 2"
MINIMUM EDGE
DISTANCE N/A 1-1/2"3/8"3"
MINIMUM END
DISTANCE N/A 2-5/8"3/8"3"
MINIMUM SPACING N/A 1-1/2"3/4"5-1/2"
INSTALLATION FASTENER QTY
CURB TO FAN
(ROOF)
CURB TO FAN
(WALL)
WOOD (ROOF)WOOD (WALL)STEEL (ROOF)
STEEL
(WALL)
CONCRETE
(ROOF)
CONCRETE
(WALL)
FAN MODEL PER SIDE
TOTA
L
PER SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTA
L
PER
SIDE
TOTAL
PER
SIDE
TOTA
L
DU33 3 12 3 12 3 12 3 12 4 16 4 16 3 12 3 12
DESIGN PRESSURE: +150.0 / -150.0 PSF.
LARGE MISSILE IMPACT RESISTANT.
GENERAL NOTES:
1. THIS APPROVAL IS FOR THE STRUCTURAL CAPACITY AND IMPACT RATING OF THE EXTERIOR
HOUSING ONLY; IT DOES NOT INCLUDE ANY INTERIOR MECHANISM OR ELECTRICAL PART.
2. THESE FANS HAVE NOT BEEN WIND TESTED FOR WIND DRIVEN RAIN TEST PER FLORIDA
BUILDING CODE, TAS100 (A)-95.
3. TESTED IN ACCORDANCE TO FLORIDA BUILDING CODE TEST PROTOCOL TAS201, TAS202, TAS203.
4. TESTED FOR AREAS INCLUDING HIGH VELOCITY HURRICANE ZONES.
5. TESTED UNDER MIAMI-DADE COUNTY NOTIFICATION NUMBER ATI-08033.
CURB MATERIAL:
20" HIGH & LESS = 20 GA. STEEL.
ABOVE 20" THRU 42" = 16 GA. STEEL.
1
2
INSTALLATION INSTRUCTIONS:
1. SECURE LID TO FAN USING (8)
1/4"-14 X 1" ZINC PLATED STEEL SELF
DRILLING SHEET METAL SCREWS WITH
RUBBER WASHER SPACED EVENLY
AROUND LID.
2. SECURE FAN BASE TO CURB USING
1/4"-14 X 2" GALVANIZED SELF DRILLING
SCREWS (A307 OR BETTER) THROUGH
PRE-PUNCHED HOLES IN THE FAN BASE.
(SEE TABLE BELOW FOR QTY).
3. SECURE CURB TO ROOF OR WALL BY
DRILLING 1/4" DIA PILOT HOLES IN THE CURB
FLANGE AT LOCATIONS SHOWN IN THE
DIAGRAM. SEE TABLE BELOW FOR FASTENER
TYPE. USE TABLE BELOW FOR FASTENER QTY.
3
FULLY WELDED CURB CORNERS
(ABOVE 20" HEIGHT).
MAX CURB
HEIGHT 42".
MIN END DISTANCE.
MIN SPACING.
MIN EDGE DISTANCE.
MIAMI-DADE COUNTY -
CURB ROOF INSTALLATION GUIDE
ROOF OPENING.
MIN EDGE
DISTANCE.
MIN END
DISTANCE.
MIN SPACING.
ROOF SUBSTRATE.
CURB.
WOOD: SG =0.42 MIN.
CONCRETE: 2500 PSI MIN.
STEEL: 12 GAUGE MIN.
CURB.
WOOD: 4 X JOIST MIN SG = 0.42 MIN.
STEEL: 12 GAUGE TRUSS MIN.
ROOF OPENING.
A
DETAIL A
SEE SPECIFIC FAN MODEL
FASTENER TABLES FOR
FASTENER TYPE AND QTY.
WASHER (STEEL ZINC PLATED)
FOR SCREW SIZES 3/8" TYP.
CURB.
1/4" PILOT
HOLE.
WALL SUBSTRATE.
1/4" PILOT HOLE.
ROOF OPENING.
A
DETAIL A
CURB.
MIN EDGE
DISTANCE.
STEEL: 12 GAUGE TRUSS MIN.
WOOD: 4X JOIST MIN SG = 0.42.
STEEL: 12 GAUGE MIN.
CONCRETE: 2500 PSI MIN.
WOOD: SG = 0.42 MIN.
WALL SUBSTRATE:
FASTENER TYPE AND QTY.
FASTENER TABLES FOR
SEE SPECIFIC FAN MODEL
FOR SCREW SIZE 3/8" TYP.
WASHER (STEEL ZINC PLATED)
ROOF
OPENING.
MIN SPACING.
MIN END
DISTANCE.
MIN EDGE
DISTANCE.
WALL CURB INSTALLATION GUIDE
MIAMI-DADE COUNTY -
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
3
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
- VARIABLE SPEED CONTROL.
- THERMAL OVERLOAD PROTECTION (SINGLE PHASE).
- HIGH HEAT OPERATION 300°F (149°C).
EXHAUST FAN MUST OPERATE CONTINUOUSLY
WHILE EXHAUSTING AIR AT 300°F (149°C)
UNTIL ALL FAN PARTS HAVE REACHED
THERMAL EQUILIBRIUM, AND WITHOUT ANY
DETERIORATING EFFECTS TO THE FAN WHICH
WOULD CAUSE UNSAFE OPERATION.
NORMAL TEMPERATURE TEST
19"
21"
25 1/2"
12 1/8"
2"
18 1/2"
- INTERNAL WIRING.
- ROOF MOUNTED FANS.
- RESTAURANT MODEL.
FEATURES:
- DIRECT DRIVE CONSTRUCTION (NO BELTS/PULLEYS).
TOP VIEW
25 1/2"
21"
- NEMA 3R SAFETY DISCONNECT SWITCH.
DUCTWORK BETWEEN
EXHAUST RISER ON HOOD
AND FAN (BY OTHERS).
25 1/4"
- UL705
FAN #1 DU33HFA - EXHAUST FAN
OPTIONS
- FAN BASE CERAMIC SEAL -
DU/DR30/33HFA - INSTALLED AT
PLANT - FOR GREASE DUCTS.
- ECM WIRING PACKAGE -
EXHAUST - MANUAL OR 0-10VDC
REFERENCE SPEED CONTROL
-MSC- (TELCO), CCW ROTATION.
- MIAMI DADE CERTIFICATION -
NOA-1 ALUMINUM UPBLAST.
- SCR-11 BIRD SCREEN.
- 2 YEAR PARTS WARRANTY.
3" FLANGE.
19"
19"
ROOF OPENING
DIMENSIONS.
16 GAUGE
CONSTRUCTION.
STEEL
24"
19 1/2"
19 1/2"
VENTED
CURB.
EXAMPLE: 7/12 PITCH = 30° SLOPE.
PITCHED CURBS ARE AVAILABLE
FOR PITCHED ROOFS.
SPECIFY PITCH:
3/8"
2°
12"
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
4
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
GREASE DUCT & CHIMNEY SPECIFICATIONS:
PROVIDE GREASE DUCT EQUAL TO CAPTIVEAIRE SYSTEMS MODEL "DW"
ROUND 20 GAUGE 430 STAINLESS STEEL DUCTWORK. MODEL "DW"
IS LISTED TO UL-1978 AND IS INSTALLED USING "V" CLAMP LOCKING
CONNECTIONS SEALED WITH 3M FIRE BARRIER 2000 PLUS. MODEL "DW"
DOES NOT REQUIRE WELDING PROVIDING IT HAS BEEN INSTALLED PER
THE MANUFACTURES INSTALLATION GUIDE.
PROVIDE RATED ACCESS DOORS AT EVERY CHANGE IN DIRECTION AND EVERY 12' ON CENTER.
PER MANUFACTURES LISTING MODEL "DW" HORIZONTAL RUNS LESS THAN 75 FT. CAN BE
SLOPED 1/16" PER 12", HORIZONTAL RUNS MORE THAN 75 FT. CAN BE SLOPED 3/16" PER 12".
DUCT SHOULD BE SLOPED AS MUCH AS POSSIBLE TO REDUCE THE CHANCE OF GREASE
ACCUMULATION IN HORIZONTAL RUNS.
IF THE DUCT OR CHIMNEY IS WITHIN 18 INCHES OF COMBUSTIBLE MATERIAL, PROVIDE
UL-2221 OR UL-103 HT LISTED DOUBLE WALL GREASE DUCT OR DOUBLE WALL CHIMNEY
EQUAL TO CAPTIVEAIRE SYSTEMS MODEL "DW- 2R, 2R TYPE HT, 3R, OR 3Z" ROUND 20 GAUGE
430 STAINLESS INNER DUCT INSULATED WITH A 24 GAUGE 430 STAINLESS OUTER SHELL.
§
CUSTOMER APPROVAL TO MANUFACTURE:
APPROVED AS NOTED
APPROVED WITH NO EXCEPTION TAKEN
REVISE AND RESUBMIT
SIGNATURE
YOUR TITLE DATE
LISTED GREASE DUCT.
EXHAUST FAN.
§
HIGH TEMP GASKET IS USED
TO SEAL THE FAN TO THE
TRANSITION PLATE.
VENTED CURB
ROOF TERMINATION.
THE INNER DUCT IS FULLY WELDED
TO THE TRANSITION PLATE, ALL
WELDS ARE DYE TESTED.
SECURED TO THE
CURB BY OTHER.
*NOTE: UL 762 INSTALL.
REV.
DWG #
DATE
LOCATION
JOB
DRAWN BY
SCALE
JOB #
ACCORDANCE
No. 96
BUILT
NFPA
WITH
IN
SLI DTE
R
C US
5
11/4/2025
JACKSONVILLE, FL,
Angie's AB
3/8" = 1'-0"
reg65
8323822
MECHANICAL PERMIT APPLICATION
City of Atlantic Beach Building Department
800 Seminole Road, Atlantic Beach, FL 32233
Phone: (904)247-5826 Email: Building-Dept@coab.us
JOB ADDRESS Q'79 M*/ah-'ic ,G'l/J c ; ve -x i
/4rlan.. e BQaoh- -fl 3,zaS 3
q NEW AIR CONDITIONING & HEATING SYSTEM INSTALLATION ARI # (REQUIRED)
FOR INTERNAL OFFICE USE ONLY
PERMIT #
•BALL information required to process
PROJECT VALUE $~5,doO
00
q Air Handling Equipment Only q Condenser Only q Air Handling Unit & Condenser
Air Conditioning: Unit Quantity Tons per Unit
BTU's per Unit Heat:
Duct Systems:
Unit Quantity
Total CFM Seer Rating (REQUIRED)
q REPLACEMENT AIR CONDITIONING & HEATING SYSTEM INSTALLATION ARI #(REQUIRED)
q Air Handling Equipment Only q Condenser Only q Air Handling Unit & Condenser
Air Conditioning: Unit Quantity Tons per Unit
Heat: Unit Quantity BTU's per Unit
Duct Systems: Total CFM Seer Rating (REQUIRED)
q FIRE PREVENTION
Fire Sprinkler System
Fire Standpipe
Underground Fire Main
Fire Hose Cabinets
Commercial Hoods
Fire Suppression Systems
q ALL OTHER GAS PIPING
Quantity of Outlets
# Vented Wall Furnaces
# Water Heaters
Fireplace
q Other:
Quantity
Quantity
Value
Quantity
Quantity l- £33(gsr 2- Vt&tf (Requires 1 set of digital plans)
Quantity d1O(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
(Requires 1 set of digital plans)
q MISCELLANEOUS
Generator
Gas Tanks
Pre-fabricated Fireplace
Solar Collection Systems
NOTICE: Permit becomes expired if work does not commence within a six month period or work is suspended or abandoned for six
months. All provisions of laws and ordinances governing this work will be complied with whether specified or not. The permit does not
give authority to violate the provisions of any other state or local law regulation construction or the performance of construction.
PROPERTY OWNER Name
q
MECHANICAL COMPANY Name /4y/e' m414417 : i t c
Address (2t7/ EMEKsOta. £4- S.,' L City 'JeGCahVI/CQ
License Holder J3'S 106 ~f/O{-' State Certification # L: .'*?Qc/ 7o6i 3 Email
Phone
Phone 9Dy- &83 9wt
State ft Zip 322 cl
'N'dq~ f -
Lbwl
"In lieu of signed, sworn and notarized signatures of the property owner, agent and/or contractor, and under penalties of
perjury, I dgclare t have read and examined the foregoing application and that the facts stated in it are true and correct."
l tngt,O t ',cM-
SIGNATURE OF CONTRACTOR PRINT OR TYPE NAME OF CONTRACTOR
S
DATE
Mechanical Permit Application 02.25.2 025
MECH25-0011