338 6th St ROOF21-0101 Garage Metal Roof and FramingOWNER:ADDRESS:CITY:STATE:ZIP:
FORD DONALD COLIN 338 6TH ST ATLANTIC BEACH FL 32233-5348
COMPANY:ADDRESS:CITY:STATE:ZIP:
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
169863 0000 ATLANTIC BEACH
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
338 6TH ST ROOF NON SHINGLE GARAGE METAL ROOF AND
FRAMING $2200.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
BUILDING PERMIT 455-0000-322-1000 0 $65.00
BUILDING PLAN CHECK 455-0000-322-1001 0 $32.50
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL: $101.50
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 1Issued Date: 1/5/2022
PERMIT NUMBER
ROOF21-0101
ISSUED: 1/5/2022
EXPIRES: 7/4/2022
ROOF NON SHINGLE PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
DESCRIPTION ACCOUNT QTY PAID
PermitTRAK $101.50
ROOF21-0101 Address: 338 6TH ST APN: 169863 0000 $101.50
BUILDING $65.00
BUILDING PERMIT 455-0000-322-1000 0 $65.00
BUILDING PLAN REVIEW $32.50
BUILDING PLAN CHECK 455-0000-322-1001 0 $32.50
STATE SURCHARGES $4.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL FEES PAID BY RECEIPT: R18415 $101.50
Printed: Wednesday, January 5, 2022 9:12 AM
Date Paid: Wednesday, January 05, 2022
Paid By: FORD DONALD COLIN
Pay Method: CREDIT CARD 570522232
1 of 1
Cashier: CG
Cash Register Receipt
City of Atlantic Beach
Receipt Number
R18415
Final Plumbing
Final Electrical
Final HVAC
CC Final
Final Building*
Swimming Pool Steel
Swimming Pool Safety
Electrical Grounding & Bonding
Swimming Pool Final (Bldg)
Swimming Pool Final (PW)
Formed Columns/ Beams*
Masonry Cell Fill
Structural Steel*
OTHER:
OTHER:
OTHER:
OTHER:
OTHER:
Power Pole
Silt Fence
Piers/ Stem Walls
Underground Plumbing
Underground Electric
Foundation/ Footing
Slab**
Retaining Wall Footing
Driveway
Sewer (Building Dept)
Sewer Tap (Utilities Dept)
Rough Electric*
Rough Plumbing/ Top Out*
Rough Mechanical*
House Wrap
Wall Sheathing
Roof Sheathing
Tie-down Framing Connections
Rough Framing
Roofing In Progress
Window/Door In-Progress
Insulation Ceiling
Insulation Wall
Exterior Lath
Stucco Scratch Coat
Exterior Siding In-Progress
Brick Flashing & Ties
Early Power
Gas Rough
Gas Final*
* When all rough electric, plumbing, mechanical are complete but before any work is
covered up.
* When all gas piping is complete and wallboard is installed but before gas is
attached to any appliance. All outlets must be capped and pipe pressurized at a
minimum of 15 lbs.
* For new living space: When all construction work including electrical, plumbing,
mechanical, exterior finish, grading, required paving and landscaping is complete
and the building is ready for occupancy, but before being occupied
Additional inspections may apply to your project if your project
contains these elements:
INSPECTIONS REQUIRED FOR BUILDING PERMITS
To verify compliance with building codes, inspections of the work authorized are required at various points of the construction.
The following inspections are typically required for residential projects:
Date: Initial: Date: Initial:
_____________________________________________________
Permit Type
____________________________________________________
Permit No.
__________________________________________________________
Job Address
____________________________________________________
Contractor
POST THIS CARD WITH PERMITS AND PERMIT
DOCUMENTATION IN FRONT OF BUILDING
Construction Hours per City Code: 7am—7pm Weekdays; 9am—7pm Weekends
Building Department Public Works/Utilities Fire Department
Phone: 904-247-5826 Phone: 904-247-5834 Phone: 904-630-4789
Fax: 904-247-5845 Fax: 904-247-5843 Fax: 904-630-4203
* When forms and reinforcing steel, anchor bolts, sleeves and inserts, and all
electrical, plumbing and mechanical work is in place, but before concrete is poured.
* When all structural steel members are in place and all connections are complete,
but before such work is covered or concealed.
** FORM BOARD ELEVATION CERTIFICATE MUST BE ON-SITE FOR SLAB INSPECTION
ROOF21-0101
ROOF21-0101
FL 9555.5-R5
C2373-5
8.8.2020
Page 2 of 3
Manufacturer: Union Corrugating Company
Product Name: MasterRib Panel
Panel Description: 36" wide coverage with 3/4" high ribs at 9" o.c.
Materials: Minimum 29 ga., 80 ksi steel. Galvanized coated steel (ASTM A653)
or Galvalume coated steel (ASTM A792) or painted steel (ASTM
A755). Corrosion resistant as per FBC 2020 Section 1507.4.3.
Support Description: Nom. 2" x 2" (min) SPF, SYP or DF lumber. (Must be designed by
others)
Slope: 1/2:12 or greater in accordance with FBC 2020 Section 1507.4.2
Design Pressure: +27.1 and -36.2 psf at support spacing of 48" o.c.
(Based on testing) (at 3 span condition with FS = 2.0)
Panel Attachment: #9-15 or #10-14 x 1.5" long wood screws with washers. Fasteners are
corrosion resistant as per FBC 2020 Section 1507.4.4.
At panel ends at 3.5"-5.5"-3.5" o.c. across panel width
At intermediate at 9" o.c. across panel width
Sidelap Attachment: ¼"-14 x 7/8" long SDS with washer at 24" o.c. Fasteners are corrosion
resistant as per FBC 2020 Section 1507.4.4.
Test Standards: Panel assembly tested in accordance with ASTM E1592-01 ‘Test
Method for Structural Performance of Sheet Metal Roof and Siding
Systems by Uniform Static Air Pressure Difference’ and FM 4470
Section 5.5 ‘Resistance to Foot Traffic’.
Test Equivalency: The test procedure in ASTM E1592-01 comply with test procedure
prescribed in ASTM E1592-05(2012).
The test procedure in FM 4470 (1992) comply with test procedure
prescribed in FM 4470 (2016) Section 4.6 ‘Resistance to Foot Traffic’.
Code Compliance: The product described herein has demonstrated compliance with FBC
2020 Section 1507.4.
Product Limitations: Design wind loads shall be determined for each project in accordance
with FBC 2020 Section 1609 or ASCE 7-16 using allowable stress
design. The maximum support spacing listed herein shall not be
exceeded. The design pressure for reduced support spacing may be
computed using rational analysis prepared by a Florida Professional
Engineer or based on Union Corrugating load span table. This product
is not approved for use in the High Velocity Hurricane Zone. Fire
FL 9555.5-R5
C2373-5
8.8.2020
Page 3 of 3
classification is not within scope of this Evaluation Report. Refer to
FBC 2020 Section 1505 and current approved roofing materials
directory for fire ratings of this product.
Supporting Documents: ASTM E1592 Test Report
ENCON Technology Inc.
C1514-1 (Test #2 & 3), Reporting Date 9/8/07
FM 4470 Test Report
ENCON Technology Inc.
C1583-2, Reporting Date 7/24/08