760 Redfin Dr ACC22-0022 Guest House Metal Roof certification and installation - REV. 6-14-22r-\ . J ; Metal Roof Certification & Listing Program KEYSTO NE
CERTIFICATIONS, INC. \ -\ ,__, Certification Report
11030-002-KCI
.061.l
LSO/lEC 17065 P'rod.nCa1ific-nionlody
145 Limekiln Road, Suite 1008 '
1 'New CUmberl~~d, PA 17070 '\ • • l Ji: 1 '
' www.keystonecerts.com '
Construction Specifications Institute (CSI) category:
Division: 07 00 00 -Thermal & Moisture Protection
Section: 07 4113 -Metal roof and wall panels
1. Program Ucensee:
~ 1
51 COAST METAL ROOFING SUPPLY
1st Coast Metal Roofing Supply
186SR207
East Palatka, FL 32131
386-325-0242
http://www.lstcoastmrs.com/
2. Certified Roof Covering:
1st Coast Metal Roofing Supply's Model Armour R_ib 29
Ga. non-structural through-fastened metal roof and wall
panels installed over plywood sheathing roof deck for
use in new construction, re-roofing and re-covering
applications.
3. Scope of Certification:
This Certification Report provides technical data
substantiating that the use of the certified roof covering
and the evaluated roof systems are in compliance with
the following:
• 2020 Florida Building Code -Building, 7th Edition,
Section 1504.3.2.
• Florida Product Approval Rule 61620-3.
Properties Evaluated:
• Wind Uplift Resistance
• Resistance to Foot Traffic
, , lssue'D~ted: '10hi/2"b11 lj
,, , {R~vj~ion D1;1te: · · 1/ll/20il· • 1
i;;i'fl .· . _Expl~tlon.·oate: ,, 1011:iJ202r,, i. :1
This Certification Report was used to qualify
Florida Product Approval FL 24397-R6.
4. Evaluated Roof System Description:
4.1. Roof Covering: Armour Rib 29 Ga. metal roof
and wall covering panels are cold roll-formed from
minimum 29 gauge ASTM A792 Grade 80 steel sheet.
The panels are aluminum-zinc alloy coated per ASTM
A792 (AZS0), and shall be installed in accordance with
the manufacturer's instructions and this Certification
Report.
4.2. Roof Deck: Armour Rib Panel metal roof and wall
panels are certified for use over solid or closely-spaced,
nominal 15/32" B-C 4 Ply Plywood sheathing complying
with 2020 Florida Building Code -Building, 7th Edition,
Section 2303.1.5, with or without the use of lx4 #2 SWP
purlins at 24" O.C., with a minimum slope of 4% (1/2:12).
Lap sealant shall be applied for installed slopes less than
25% (3:12). When used, lx4 purlins are attached
through the sheathing and into the rafters using (2) 8x3"
deck screws max. 24" O.C.
4.3. Anchorage: Armour Rib 29 Ga. metal roof and
wall panels shall be through-fastened to the purlins or
roof deck using #10-15 x 1-1/2" Woodgrip hex-head
wood screws with bond-seal washer or equivalent, as
specified in Table 1, applied in the patterns described in
Appendix 1.
4.4. Underlayment: Armour Rib 29 Ga. metal roof
panels in new construction applications shall be installed
over underlayment meeting the applicable material type
and attachment details specified in 2020 Florida Building
Code -Building, 7th Edition Table 1507.1.1.1., the
manufacturer's installation instructions and this
Certification Report.
Refer to www.keystonecerts.com to ascertain the ongoing status of this Certification Report. Approval of building products and/or materials can only be granted by
the building official having jurisdictional legal authority. Keystone Certifications, Inc. does not endorse or make warranties with respect to product performance or
suitabillty of a product for a given use.
By Toni Gindlesperger at 11:04 am, Jun 14, 2022
By Mike Jones at 3:34 pm, Jun 25, 2022
Metal Roof Certification & Listing Program
Certification Report
11030-002-KCI
0
•0&12
ISO/JEC 17°'5 h-odua c:.m&uioa llodr
Page2o/4
Installation
Armour Rib ~9 Ga. metal roof and wall panels in new
construction applications shall be installed in accordance
with the 2020 Florida Building Code -Building, 7th
Edition, Section 1507.4, the manufacturer's published
installation instructions and this Certification Report.
Armour Rib 29 Ga. metal roof and wall panels in re-
roofing and re-covering applications may be installed
over a single layer of existing shingles and shall be
installed in accordance with the 2020 Florida Building
Code -Building, 7th Edition, Sections 1507 .4 & 1511, the
manufacturer's published installation instructions and
this Certification Report.
The manufacturer's installation instructions shall be
made available at the time of installation., If there are
differences between this report and the manufacturer's
installation instructions, this · report · shall take
precedence.
S. Product Performance
The performance of the Armour Rib 29 Ga. non-
structural through-fastened metal roof and wall panels
described in this Certification Report has been
determined in accordance with:
• UL 580-94, Tests for Uplift Resistance of Roof
Assemblies.
• UL 1897-98, Uplift Tests/or Roof Covering Systems.
• FM 4470, Resistance to Foot Traffic Test.
As tested & reported by the following independent
accredited laboratory:
Laboratory Report Ref.
Force Engineering & Testing 384/593-0030T-10A, B
384/593-0030T-10C, D
384/593-0030T-10E
Note: The UL 580-94 standard is equivalent to the UL
580-06 standard, the UL 1897-04 standard is equivalent
to the UL 1897-2012 standard, and the FM 4470-12
standard is equivalent to the FM 4470-16 standard.
5.1. Wind Resistance
The allowable design uplift pressures for Armour Rib 29
Ga. an.chored as described in Table 1 and illustrated in
)\ppendix 1, when tested in accordance with the
referenced standards with an applied safety factor of 2.0
are found in Table 1.
Table 1
Max Anchor
Description Anchor Man'f & Design
Pattern Model Uplift . Pressure
Over 15/32" SFS Hilo
4 Ply A Woodgrip 78.S psf #10-15 X 1-Plywood 1/2" -
SFS Hilo Over 15/32"
4 Ply B Woodgrip 108.S psf #--10-15 X 1-Plywood 1/.2" --·------Over lx4 SFS Hilo
Purlins Over A Woodgrip 108.5 psf
15/32" 4 Ply #10-15 X 1-
Plywood 1/2"
Over lx4 SFS Hilo
Purlins Over B Woodgrip 183.5 psf
15/32" 4 Ply #10-15 X 1-
Plywood 1/2"
Refer to www.kevstonecerts.com to ascertain the ongoing status of this Certification Report. Approval of building products and/or materials can only be granted by
the building official having Jurisdictional legal authority. Keystone Certifications, Inc. does not endorse or make warranties with respect to product performance or
suitability of a product for a given use.
I \ I .
l<EYSTO~
C E RTIF I C ATIONS, INC.
'-' I _J
Metal Roof Certification & Listing Program
Certification Report
11030-002-KCI "°'" ISO/IIC 1706'
PNd,,w, C..-Uftunon lodJ
Page3o/4
5.2. Resistance to Foot Traffic
The Armour Rib 29 Ga. non-structural through-fastened
metal roof and wall panels were tested per the
referenced standard installed using Anchor Pattern A
over 1x4 SWP purlins over 15/32n 4 ply plywood. The
resultant deflection under load and permanent
deflection were within the allowable limits defined by
the standard.
6. Conditions of Use
Armour Rib 29 Ga. non-structural through-fastened
metal roof and wall panels must be insulated against
other materials or metals including concrete, lead,
copper and treated lumber that contains corrosive
materials.
7. Limitations of Use
Armour Rib 29 Ga. non-structural through-fastened
metal roof and wall panels are !!.Qt qualified for use in the
High Velocity Hurricane Zone (HVHZ).
Fire classification, shear diaphragm design, roof deck
design & attachment to supporting members are not
within the scope of this Certification Report.
Roof support framing shall comply with 2020 Florida
Building Code -Building, 7th Edition, Chapter 22 for steel,
Chapter 23 for wood and Chapter 16 for structural
loading.
8. Licensed Manufacturing Facilities
This Certification Report is applicable only to Armour Rib
29 Ga. non-structural through-fastened metal roof and
wall panels manufactured at the following locations:
1st Coast Metal Roofing Supply
186 State Rd 207
East Palatka, Florida 32131
Each licensed facility is subject to periodic inspection by
Keystone Certifications to verify conformance with
Keystone Roof Covering Certification & Listing Program
requirements.
9. Identification
Armour Rib 29 Ga. non-structural through-fastened
metal roof and wall panels represented by this report
shall be identified with Keystone Roof Covering
Certification & Listing Program certification labeling
illustrated below, to be applied to individual panels,
packaging, invoicing or bills of lading:
keystonecerts.com
11030-002-KCI
2021.01.1
+--11-~f~ 1 09:35:41
-05'00'
Aaron M. Shultz
Validation Manager
Refer to www.keystonecerts.com to ascertain the ongoing status of this Certification Report. Approval of building products and/or materials can only be granted by
the building official having Jurisdictional legal authority. Keystone Certifications, Inc. does not endorse or make warranties with respect to product performance or
suitability of a product for a given use.
Appendix 1
Anchor Pattern A
~C'ii UNOCRl4YMCNT (l!!:OUl!iED (r,'I.Y fOR HEW CO>iSIRUCIION)
ARMOUR RI&
AAMOURIU8
MK 2lf_ WOOD 11.AFT[R/JOIST/
{Rt)SS Al W.X, 2•• O.C.
MIN 2X_ WOOi) RAFW!/ JCllS1 / TRUSS Al MU. 2•• O.C.
DOSTl'IG Sjj!NGLES' (OPIIO.'</,l)
Metal Roof Certification & Listing Program
Certification Report
11030-002-KCI
Page4 o/4
Note: In all cases (new construction, re-roofing and re-
covering), the anchors shall fully penetrate the purlins
or the plywood roof deck (as applicable).
NCW ll\GfRl'AYl.l:tNT :\ (qfQUIR£D ONt Y FOR
S(W C0051i'UC!ION)
/
ROWS~f10-15x 1·11'2"SfSHla I 9· (TYP.)--- •'OOOOOIP• 24"0.C.
M!KIMUM A.H:ACHMENT:
ea,2.5"t.a<GR!NCSIWIKNAA. OR #8 , 2" LO>.c II000 SCR£WS
SPACl'D O a· o.c. IN TM£ riru;, .t
Al EDC(S
. FA!l1EJUM1JfRIIMPAllfl-OOS
l.f!Ntt.llAI ATTAC.HM(t{J:
ed , 2.s· lONC RJNC .St~NIC NA,'L
OR f6 , 2• LONG II000 SCl!!:WS
-Sf\11:(0 0 6° O.C. l!I 1\;£ Fl(LO &
AT EoctS
PI.Y.-000 1~/ J2• 1ltCI< (""'-)
ROWSOff10-15 x 1-112" SFSHlo r =••2•· 0.c.
"'"'l!UI.I All~ T1 Bd'< 2S LONG l!;!fG -~ NAil. OR ta • 2" lONC II000 SCRCWS sPAC(O O 6° 0.C. IN llj( r1ELO & Al (DG£S
Refer to www.keystonecerts.com to ascertain the ongoing status of this Certification Report. Approval of building products and/or materials can only be granted by
the building official having jurisdictional legal authority. Keystone Certifications, Inc. does not endorse or make warranties with respect to product performance or
suitability of a product for a given use.
145 Limekiln Road, Suite 100B
New Cumberland, PA 17070
www.keystonecerts.com
Rev# Date
0 10/27/2017
1 1/8/2018
2 1/23/2018
3 6/25/2()18
4 03/12/2019
5 9/3/2019
6 10/3/2019
7 10/12/2020
8 1/11/2021
Metal Roof Certification & Listing Program
Certification Report
11030-002-KCI
Issue Dated:
Revision Date:
Expiration Date:
Certificate Revisions
Description
Initial issuance.
Added reference to associated Florida Product Approval No 24397.
Added hyperlink to FL24397
ISO/ltc 1706S
Prodao: c.a&moa
10/27/2017
1/11/2021
10/12/2025 .,
Removed refs to measurements for mat'I thickness and yield strength, relying on
applicable Gauge and steel Grade. Added ref to lx4 purlin anchorage.
Updated Model name to include metal roof "and Wall panels"
Updated ANSI Logo to proper requirements.
Revised anchorage illustrations for clarity, added reference to optional re-roofing
/ re-covering installation over "one layer of existing shingles».
Updated to 2020 FBC 7th Edition.
Corrected Model name. Updated FPA link.
Refer to www.keystonecerts.com to ascertain the ongoing status of this Certification Report. Approval of building products and/or materials can only be granted by
the building official having jurisdictional legal authority. Keystone certifications, Inc. does not endorse or make warranties with respect to product performance or
suitability of a product for a given use.