376 10th ST RES21-0373 PGT Fixed Windows NOA No. 20-0401.15
Expiration Date: April 30, 2025
Approval Date: August 06, 2020
Page 1
MIAMI–DADE COUNTY, FLORIDA
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/building
PGT Industries, Inc.
1070 Technology Drive
North Venice, FL 34275
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed and accepted by Miami-Dade County RER -
Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority
Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control
Section (In Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve the right
to have this product or material tested for quality assurance purposes. If this product or material fails to perform
in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may immediately
revoke, modify, or suspend the use of such product or material within their jurisdiction. RER reserves the
right to revoke this acceptance, if it is determined by Miami–Dade County Product Control Section that this
product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code,
including the High Velocity Hurricane Zone.-
DESCRIPTION: Series “PW-5420 Vinyl" PVC Fixed Window – N.I.
APPROVAL DOCUMENT: Drawing No. MD-5420.0 titled “Vinyl Fixed Window NOA (NI)”, sheets 1
through 9 of 9, dated 09/09/14, with revision C dated 03/16/2020, prepared by manufacturer, signed and sealed
by Anthony Lynn Miller, P.E., bearing the Miami-Dade County Product Control Revision stamp with the
Notice of Acceptance number and expiration date by the Miami-Dade County Product Control Section.
MISSILE IMPACT RATING: None
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state,
model/series, and following statement: "Miami-Dade County Product Control Approved", unless otherwise
noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no
change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in
the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of
any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to
comply with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed
by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then
it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors
and shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No. 19-1126.09 and consists of this page 1 and evidence pages E-1, E-2 and E-3, as
well as approval document mentioned above.
The submitted documentation was reviewed by Sifang Zhao, P.E.
08/06/2020
RES21-0373By Mike Jones at 10:14 am, Jan 20, 2022
Sifang Zhao, P.E.
Product Control Examiner
NOA No. 20-0401.15
Expiration Date: April 30, 2025
Approval Date: August 06, 2020
E - 1
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
1. EVIDENCE SUBMITTED UNDER PREVIOUS NOA’s
A. DRAWINGS
1. Manufacturer's die drawings and sections. (Submitted under NOA No. 14-0930.24)
2. Drawing No. MD-5420.0 titled “Vinyl Fixed Window NOA (NI)”, sheets 1 through 9
of 9, dated 09/09/14, with revision B dated 06/06/17, prepared by manufacturer,
signed, sealed and dated 6/9/17, by Anthony Lynn Miller, P.E.
(Submitted under NOA No. 17-0614.08)
B. TESTS
1. Test reports on: 1) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of a PVC sliding glass door, a
PVC fixed window and an aluminum sliding glass door, using: Kodispace 4SG TPS
spacer system, Duraseal® spacer system, Super Spacer® NXT™ spacer system and XL
Edge™ spacer system at insulated glass, prepared by Fenestration Testing Laboratory,
Inc., Test Reports No. FTL-8717, FTL-8968 and FTL-8970, dated 11/16/15, 06/07/16
and 06/02/16 respectively, all signed and sealed by Idalmis Ortega, P.E.
(Submitted under NOA No. 16-0629.11)
2. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test, per FBC 2411.3.2.1, and TAS 202-94
along with marked-up drawings and installation diagram of a PVC fixed window,
prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-7897, dated
08/01/14, signed and sealed by Idalmis Ortega, P.E.
(Submitted under NOA No. 14-0930.24)
C. CALCULATIONS
1. Anchor verification calculations and structural analysis, complying with FBC 5th
Edition (2014), dated 09/18/14 and 04/07/15, prepared by manufacturer, signed and
sealed by Anthony Lynn Miller, P.E. (Submitted under NOA No. 14-0930.24)
2. Glazing complies with ASTM E1300-09
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER).
Sifang Zhao, P.E.
Product Control Examiner
NOA No. 20-0401.15
Expiration Date: April 30, 2025
Approval Date: August 06, 2020
E - 2
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
E. MATERIAL CERTIFICATIONS
1. Notice of Acceptance No. 16-0712.03 issued to ENERGI Fenestration Solutions USA
for their “White Rigid PVC Exterior Extrusions for Windows and Doors” dated
08/10/17, expiring on 02/28/18.
2. Notice of Acceptance No. 16-0712.04 issued to ENERGI Fenestration Solutions USA,
Inc. for their “Bronze and Lighter Shades of Cap Coated White Rigid PVC
Exterior Extrusions for Windows and Doors” dated 09/15/16, expiring on 04/16/20.
3. Notice of Acceptance No. 16-0712.05 issued to ENERGI Fenestration Solutions USA,
Inc. for their “Performance Core Rigid PVC Exterior Extrusions for Windows
and Doors” dated 09/15/16, expiring on 04/16/20.
F. STATEMENTS
1. Statement letter of conformance, complying with FBC 5th Edition (2014) and FBC
6th Edition (2017), dated August 29, 2017, issued by manufacturer, signed and sealed
by Anthony Lynn Miller, P.E. (Submitted under NOA No. 17-0614.08)
2. Statement letter of no financial interest, dated June 9, 2017, issued by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E. (Submitted under NOA No. 17-0614.08)
3. Proposal issued by Product Control, dated 6/26/14, signed by Jaime Gascon, P.E.
Supervisor, Product Control Section. (Submitted under NOA No. 14-0930.24)
4. Proposal No. 16-0125 issued by the Product Control Section, dated March 09, 2016,
signed by Ishaq Chanda, P.E. (Submitted under NOA No. 16-0629.11)
G. OTHERS
1. NOA No. 16-0629.11, issued to PGT Industries, Inc. for their Series “PW-5420
Vinyl” PVC Fixed Window – N.I. approved on 08/04/16 and expiring on 04/30/20.
2. NEW EVIDENCE SUBMITTED
A. DRAWINGS
1. Drawing No. MD-5420.0 titled “Vinyl Fixed Window NOA (NI)”, sheets 1 through 9
of 9, dated 09/09/14, with revision C dated 03/16/2020, prepared by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E.
B. TESTS
1. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test, per ASTM F588 and TAS 202-94
along with marked-up drawings and installation diagram of all PGT Industries, Inc.
representative units listed below and tested to qualify Dowsil 791 and Dowsil 983
silicones, prepared by Fenestration Testing Laboratory, Inc., Test Reports No.:
Sifang Zhao, P.E.
Product Control Examiner
NOA No. 20-0401.15
Expiration Date: April 30, 2025
Approval Date: August 06, 2020
E - 3
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
B. TESTS (CONTINUED)
FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09/03/14
FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in proposal)
FTL-20-2107.2, PGT CA740 Alum. Outswing Casement Window (unit 8 in proposal)
FTL-20-2107.3, PGT PW7620A Aluminum Fixed Window (unit 9 in proposal) and
FTL-20-2107.4, PGT PW7620A Aluminum Fixed Window (unit 10 in proposal)
dated 07/13/20, all signed and sealed by Idalmis Ortega, P.E
C. CALCULATIONS
1. Anchor verification calculations and structural analysis, complying with FBC-6th
Edition (2017) and FBC-7th (2020) dated 03/13/20, prepared by manufacturer, signed
and sealed by Anthony Lynn Miller, P.E.
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER)
E. MATERIAL CERTIFICATIONS
1. NOA No. 18-0122.02 issued to ENERGI Fenestration Solutions USA, for their
“White Rigid PVC Exterior Extrusions for Windows and Doors” dated 03/08/18,
expiring on 02/28/23.
2. NOA No. 20-0203.03 issued to ENERGI Fenestration Solutions USA, Inc. for their
“Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior Extrusions for
Windows and Doors” dated 02/27/20, expiring on 04/16/25.
3. NOA No. 20-0203.04 issued to ENERGI Fenestration Solutions USA, Inc. for their
“Performance Core Rigid PVC Exterior Extrusions for Windows and Doors”
dated 02/27/20, expiring on 04/16/25.
F. STATEMENTS
1. Statement letter of conformance, complying with FBC-6th Edition (2017) and FBC-
7th Edition (2020), dated 03/16/20, issued by manufacturer, signed and sealed by
Anthony Lynn Miller, P.E.
2. Statement letter of no financial interest, dated 03/16/20, issued by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E.
3. Proposal No. 19-1155 TP issued by the Product Control Section, dated January 10,
2020, signed by Ishaq Chanda, P.E.
G. OTHERS
1. NOA No. 19-1126.09, issued to PGT Industries, Inc. for their Series “PW-5420
Vinyl” PVC Fixed Window – N.I., approved on 01/09/20 and expiring on 04/30/25.
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15
352'8&75(9,6('DVFRPSO\LQJZLWKWKH)ORULGD%XLOGLQJ&RGH12$²1R([SLUDWLRQ'DWH%\0LDPL²'DGH3URGXFW&RQWURO04/30/202520-0401.15