2325 Beachcomber Trl PPI22-0001 2nd submittal 4 of 5 (1)Product Evaluation Report
Rule 61G2-3 F.A.C. | Report No. 2511, Rev. 3 | Project No. 421-0304 | 7/8/21 | Page 1 of 5
PTC Product Design Group, LLC | PO Box 520775 | Longwood, FL 32752-0775
321-690-1788 | FBPE Certification of Authorization No. 25935
Product Manufacturer
Product Name, Model and/or Description
Kaycan Ltd.
1 Memorial Drive
Richford, VT 05476
Vinyl Soffit - Various
Code: Current Edition of the Florida Building Code including the 7th Edition (2020) Florida Building Code
Compliance Method: 61G20-3.005(1)(d) – Product Evaluation Report by a Licensed Professional Engineer
Product Name, Model and/or Designation: Products covered by this evaluation include the following.
• KAY0007 – Single Spans
o 12" TRIPLE 4 SOLID SOFFIT
o 12" TRIPLE 4 VENTED SOFFIT
o 12" TRIPLE 4 CENTER-VENT SOFFIT
o 12" TRIPLE 4 CENTER-O-VENT SOFFIT
o 12" TRIPLE 4 FULL-O-VENT SOFFIT
o 10" DOUBLE 5 SOLID SOFFIT
o 10" DOUBLE 5 VENTED SOFFIT
o 8" BEADED SOLID SOFFIT
o 8" BEADED VENTED SOFFIT
• KAY0009 – Unlimited Spans
o 12" TRIPLE 4 SOLID, NO. 0623 SOLID SOFFIT
o 12" TRIPLE 4 FULL-O-VENT, NO. 0622 VENTED SOFFIT
o 12" TRIPLE 4 FULL-O-VENT ECO, NO. 0639 VENTED SOFFIT
• KAY0011 – Single Spans
o 12" TRIPLE 4 SOLID, NO. 0623 SOLID SOFFIT
o 12" TRIPLE 4 FULL-O-VENT, NO. 0622 VENTED SOFFIT
o 12" TRIPLE 4 FULL-O-VENT ECO, NO. 0639 VENTED SOFFIT
• KAY0012 – Unlimited Spans
o 12" TRIPLE 4 FULL-O-VENT ECO, NO. 0639 VENTED SOFFIT
• KAY0013 – Single Spans
o 12" TRIPLE 4 FULL-O-VENT ECO, NO. 0639 VENTED SOFFIT
• KAY0017 – Single Spans
o 12" Triple 4 Solid Soffit
o 12" Triple 4 Full-O-Vent Eco Vented Soffit
Product Installation Instructions:
• PTC Product Design Group LLC, Drawing No. KAY0007, Rev. E, Dated 12/28/20, by Robert J. Amoruso,
P.E., Kaycan LTd. Vinyl Soffit - Solid and Vented, Installation Anchorage Details.
By Jennifer Johnston at 4:08 pm, May 20, 2022
PPI22-0001
By Mike Jones at 11:43 am, Jun 06, 2022
Product Evaluation Report
Rule 61G2-3 F.A.C. | Report No. 2511, Rev. 3 | Project No. 421-0304 | 7/8/21 | Page 2 of 5
PTC Product Design Group, LLC | PO Box 520775 | Longwood, FL 32752-0775
321-690-1788 | FBPE Certification of Authorization No. 25935
• PTC Product Design Group LLC, Drawing No. KAY0009, Rev. C, Dated 12/28/20, by Robert J. Amoruso,
P.E., Kaycan LTd. Vinyl Soffit – Various Solid and Vented with Unlimited Spans, Installation Anchorage
Details.
• PTC Product Design Group LLC, Drawing No. KAY0011, Rev. C, Dated 12/28/20, by Robert J. Amoruso,
P.E., Kaycan LTd. Vinyl Soffit – Solid and Vented with Single Spans, Installation Anchorage Details.
• PTC Product Design Group LLC, Drawing No. KAY0012, Rev. C, Dated 12/28/20, by Robert J. Amoruso,
P.E., Kaycan LTd. Vinyl Soffit - 12" Triple 4 Full-O-Vent Eco (No. 0639) with Unlimited Spans, Installation
Anchorage Details.
• PTC Product Design Group LLC, Drawing No. KAY0013, Rev. C, Dated 12/28/20, by Robert J. Amoruso,
P.E., Kaycan LTd. Vinyl Soffit - 12" Triple 4 Full-O-Vent Eco (No. 0639) with Single Spans, Installation
Anchorage Details.
• PTC Product Design Group LLC, Drawing No. KAY0017, First Issue, dated 6/25/21, by Robert J. Amoruso,
P.E., Kaycan Ltd., 12" Triple 4 Solid Soffit and 12" Triple 4 Full-O-Vent Eco Vented Soffit with Single
Spans, Installation Anchorage Details.
Test Reports and Performance Testing Standards Used:
KAY0007
• Fenestration Testing Laboratory, Inc. Testing Report No. 7367, dated 6/1/13 including associated
laboratory stamped drawings for Kaycan Vinyl Soffit testing to ASTM E330-02.
• Architectural Testing Inc. Test Report No. ATI 55983.01-106-18, dated 1/3/2006 for Kaycan Vinyl Soffit
and Siding, materials testing to:
i) ASTM D3679-01c, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
ii) ASTM G155-00ae1, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-
Metallic Materials
iii) ASTM D638-03, Standard Test Method for Tensile Properties of Plastics
iv) ASTM D2843-99, Standard Test Method for Density of Smoke from the Burning or Decomposition of
Plastics
v) ASTM D1929-96 (2000)e0 1, Standard Test Method for Determining Ignition Temperature of Plastics
vi) ASTM D635-98, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of
Plastics in a Horizontal Position
KAY0009, KAY0011, KAY0012 & KAY0013
• Molimo Architectural Product Testing, 1410 Eden Road, York, Pennsylvania 17402 – Vinyl Soffit Product
Testing
i) Test Report No. 1169.01-106-11, SERIES / MODEL: 0623 Solid Vinyl Soffit, "J" Channel / Fascia
Installation, ASTM E330-14, dated 2/13/17
ii) Test Report No. 1169.02-106-11, SERIES / MODEL: 0623 Solid Vinyl Soffit, "J" Channel / "J" Channel
Installation, ASTM E330-14, dated 2/13/17
iii) Test Report No. 1170.01-106-11, SERIES / MODEL: 0622 Vented Vinyl Soffit, "J" Channel / Fascia
Installation, ASTM E330-14, dated 2/13/17
iv) Test Report No. 1170.02-106-11, SERIES / MODEL: 0622 Vented Vinyl Soffit, "J" Channel / "J"
Channel Installation, ASTM E330-14, dated 2/13/17
Product Evaluation Report
Rule 61G2-3 F.A.C. | Report No. 2511, Rev. 3 | Project No. 421-0304 | 7/8/21 | Page 3 of 5
PTC Product Design Group, LLC | PO Box 520775 | Longwood, FL 32752-0775
321-690-1788 | FBPE Certification of Authorization No. 25935
v) Test Report No. 1171.03-106-11, SERIES / MODEL: 0639 Vented Vinyl Soffit, "J" Channel / Fascia
Installation, ASTM E330-14, dated 2/13/17
vi) Test Report No. 1171.04-106-11, SERIES / MODEL: 0639 Vented Vinyl Soffit, "J" Channel / "J"
Channel Installation, ASTM E330-14, dated 2/13/17
vii) Test Report No. 1171.01-106-11-R1, SERIES / MODEL: 0639 Vented Vinyl Soffit, "J" Channel / Fascia
Installation, ASTM E330-14, dated 1/31/17
• Architectural Testing Inc. Test Report No. ATI 55983.01-106-18, dated 1/3/2006 for Kaycan Vinyl Soffit
and Siding, materials testing to:
i) ASTM D3679-01c, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
ii) ASTM G155-00ae1, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-
Metallic Materials
iii) ASTM D638-03, Standard Test Method for Tensile Properties of Plastics
iv) ASTM D2843-99, Standard Test Method for Density of Smoke from the Burning or Decomposition of
Plastics
v) ASTM D1929-96 (2000)e0 1, Standard Test Method for Determining Ignition Temperature of Plastics
vi) ASTM D635-98, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of
Plastics in a Horizontal Position
KAY0017
• Molimo Architectural Product Testing, 1410 Eden Road, York, Pennsylvania 17402 – Aluminum Soffit
Product Testing, Test Report No. 2875.02-106-11, 12" Triple 4 Solid Soffit and 12" Triple 4 Full-O-Vent
Eco Vented Soffit, ASTM E330-14, dated 4/13/21.
• Architectural Testing Inc. Test Report No. ATI 55983.01-106-18, dated 1/3/2006 for Kaycan Vinyl Soffit
and Siding, materials testing to:
i) ASTM D3679-01c, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding
ii) ASTM G155-00ae1, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-
Metallic Materials
iii) ASTM D638-03, Standard Test Method for Tensile Properties of Plastics
iv) ASTM D2843-99, Standard Test Method for Density of Smoke from the Burning or Decomposition of
Plastics
v) ASTM D1929-96 (2000)e0 1, Standard Test Method for Determining Ignition Temperature of Plastics
vi) ASTM D635-98, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of
Plastics in a Horizontal Position
Engineering Evaluation:
• See Appendix A for Code Conformance Evaluation
• Anchorage engineering and test result interpretation are documented in the following:
o PTC Product Design Group LLC, Report No. 2240, Engineering analysis for Kaycan Vinyl and
Aluminum Soffit, dated 7/11/13, by Robert J. Amoruso, P.E.
o PTC Product Design Group LLC, Report No. 2492, Engineering analysis for Kaycan Vinyl and
Aluminum Soffit, dated 3/20/17, by Robert J. Amoruso, P.E.
Product Evaluation Report
Rule 61G2-3 F.A.C. | Report No. 2511, Rev. 3 | Project No. 421-0304 | 7/8/21 | Page 4 of 5
PTC Product Design Group, LLC | PO Box 520775 | Longwood, FL 32752-0775
321-690-1788 | FBPE Certification of Authorization No. 25935
Limitations & Conditions of Use:
• This product has not been evaluated for use inside the High Velocity Hurricane Zone (HVHZ).
• Refer to Product Installation Instructions noted above for:
o Maximum allowable wind loads at related maximum allowable size(s).
o Overall dimensions and material/grade of main product components, accessories, etc.
o Illustrated diagrams of the attachment of the product to substrate structure.
o Anchor type(s), size(s), substrate(s), embedment, edge distance, and spacing/locations.
• Site wind pressures shall be determined by a licensed professional engineer in accordance with the
current edition of the Florida Building Code (and/or ASCE 7 as referenced in the current edition of the
Florida Building Code) for components and cladding based on allowable stress design.
• Site conditions not covered in this product evaluation document are subject to additional engineering
analysis by a licensed professional engineer or registered architect as required by the authority having
jurisdiction.
• Adequacy of the existing structural substrates as a main wind force resisting system capable of
withstanding and transferring applied product loads to the foundation is the responsibility of the
licensed professional engineer or registered architect acting as the design professional of record for
the project of installation.
Certificate of Independence per Product
Approval Rule 61G20-3.009
PTC Product Design Group, LLC and Robert J.
Amoruso, P.E. does not have, nor will acquire,
any financial interest in the company
manufacturing or distributing product(s)
covered by this Product Evaluation Report.
PTC Product Design Group, LLC and Robert J.
Amoruso, P.E. do not have, nor will acquire
any financial interest in any other entity
involved in the approval process or testing of
the product(s) covered by this Product
Evaluation Report.
Evaluated by:
Robert J. Amoruso, P.E.
FL PE License No. 49752
Appendix A – Code Conformance Evaluation
• Vinyl soffit certified and labeled as conforming to the requirements of ASTM D3679.
• Vinyl soffit tested to 1.5 x Design Pressure.
• Vinyl soffit labeled in accordance with the Florida Building Code.
• Vinyl soffit plastics comply with Chapter 26 of the Florida Building Code as shown below.
Digitally signed
by Robert J
Amoruso
Date:
2021.07.08
14:11:20 -04'00'
Product Evaluation Report
Rule 61G2-3 F.A.C. | Report No. 2511, Rev. 3 | Project No. 421-0304 | 7/8/21 | Page 5 of 5
PTC Product Design Group, LLC | PO Box 520775 | Longwood, FL 32752-0775
321-690-1788 | FBPE Certification of Authorization No. 25935
Test Standard ASTM D3679-01c ASTM G155-00ae1 ASTM D638-03 ASTM D2843-99 ASTM D1929-96 (2000)e0 1 ASTM D635-98 Acceptance Criteria
P/F N/A
Tensile
Test
Variation
< 10%
Smoke
Density
< 75
Self-
Ignition
Temp
> 3430C
Class
CC1 or
CC2 Test Report
Test
Report
Date
Product
ATI
55983.01-
106-18
1/3/2006 Vinyl Soffit Passed Tested
Passed
8.1%
max
46.0
max
4540C
to
4970C
CC1