801 Atlantic Blvd ELPP23-0027 COAB Permit Form with ConditionsOWNER:ADDRESS:CITY:STATE:ZIP:
JAX FEDERAL CREDIT
UNION 562 PARK ST JACKSONVILLE FL 32204-2918
COMPANY:ADDRESS:CITY:STATE:ZIP:
Ron Adams Electric 4390 E Highway 316 Citra FL 32113
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
177641 0000 SECTION LAND
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
801 ATLANTIC BLVD
ELECTRICAL COMMERCIAL OR
MULTIFAMILY DETAILS PER
BLDG PLANS
NEW 100 amp FEEDER @
VERIZON $11000.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
ELEC NEW COMMERCIAL 455-0000-322-1000 100 $50.00
ELECTRICAL BASE FEE 455-0000-322-1000 0 $55.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 2Issued Date: 5/3/2023
PERMIT NUMBER
ELPP23-0027
ISSUED: 5/3/2023
EXPIRES: 10/30/2023
ELECTRICAL COMMERCIAL OR
MULTIFAMILY DETAILS PER BLDG
PLANS PERMIT
CITY OF ATLANTIC BEACH
TOTAL: $109.00
2 of 2Issued Date: 5/3/2023
PERMIT NUMBER
ELPP23-0027
ISSUED: 5/3/2023
EXPIRES: 10/30/2023
ELECTRICAL COMMERCIAL OR
MULTIFAMILY DETAILS PER BLDG
PLANS PERMIT
CITY OF ATLANTIC BEACH
ELPP23-0027
TITLE SHEETPREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONT-1DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22CONTACT INFORMATIONSITE DIRECTIONSLIST OF DRAWINGSLOCATION SKETCHAPPROVALSFrom I-95 & US-1 (Jacksonville):1.Head east on US-1 S (go 0.6 mi)2.Continue onto US-1 ALT S (go 2.8 mi)3.Continue onto Martin Luther King Jr Pkwy (go 0.4 mi)4.Take the exit onto FL-115 S toward Mathews Brg/Arlington/Jax Beaches (go 4.8 mi)5.Use the left 2 lanes to take the FL-10/Arlington Expy exit (go 0.1 mi)6.Continue onto FL-10 E/Arlington Expy7.Continue to follow FL-10 E (go 9.1 mi)8.Turn left (go 118 ft)9.Destination will be on the leftSITE LOCATIONPROPERTY OWNER: _________________________________________________________________RF ENGINEER: ______________________________________________________________________CONSTRUCTION: ____________________________________________________________________SITE ACQUISITION: __________________________________________________________________ZONING: ___________________________________________________________________________NETWORK: _________________________________________________________________________OPERATIONS: ______________________________________________________________________SITE INFORMATIONAPPLICABLE CODESJURISDICTION:FDOTPARCEL ID #:N/A (R.O.W.)LATITUDE:30° 19' 29.0400" NORTH30.324733° NLONGITUDE:81° 24' 33.1300" WEST81.409203° WAPPLICANT:VERIZON WIRELESS7701 E TELECOM PKWYTEMPLE TERRACE, FL 33637ARCHITECT/ ENGINEER:CBVR/ HUGH O. REILLY, PE6505 N HIMES AVETAMPA, FLORIDA 33614ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23T-1TITLE SHEETSITE GENERAL ARRANGEMENT PLANSARCHITECTURAL/ CIVIL PLANSC-3ELEVATION & EQUIPMENT PLANELECTRICAL PLANSC-4DETAILS (1 OF 2)C-2SITE PLANE-1CITY AND ELECTRICAL NOTESSCOPE OF WORKC-1SITE PLAN W/ AERIALTOWER OWNER:VERIZON WIRELESS7701 E TELECOM PKWYTEMPLE TERRACE, FL 33637N-1NOTESC-5DETAILS (2 OF 2)E-2UTILITY ROUTING/ ONE-LINE DIAGRAM/ PANEL SCHEDULEE-3GROUNDING DETAIL & NOTESE-4GROUNDING DETAILSS-1SURVEYCONSTRUCTION NOTESANY CONSTRUCTION AT THE SITE WILL USE BEST MANAGEMENTPRACTICES INCLUDING SOIL EROSION CONTROL MEASURES, AS ALSOREQUIRED BY LOCAL JURISDICTION, AND NOTED ON THE CONSTRUCTIONDRAWING.NOTES:·CONTRACTOR SHALL RESTORE AND REPAIR ANY DAMAGED AREASCAUSED BY CONSTRUCTION TO ORIGINAL OR BETTER CONDITION·ALL NEW WORK TO BE PERFORMED PER LATEST ROW STANDARDS &SPECIFICATIONSBUILDING CODE: FLORIDA BUILDING CODE (FBC) , 7TH EDITION (2020)NATIONAL ELECTRICAL SAFETY CODE: 2017 EDITIONELECTRICAL CODE: NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) 70MECHANICAL CODE: MECHANICAL CODE, 5TH EDITIONLIFE SAFETY CODE: NFPA-101-2012DEPARTMENT OF TRANSPORTATION ADA STANDARDS FORTRANSPORTATION FACILITIESAMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATIONOFFICIALS (AASHTO)ASCE 74-20, 4TH EDITIONTHE FOLLOWING DESIGN CRITERIA APPLY:2017 NESC RULE 250C WIND DATA IS USED.BASIC WIND SPEED OF 96 MPHRISK CATEGORY II.EXPOSURE CATEGORY C.TOPOGRAPHIC CATEGORY 1SITE NAME:NEPTUNE BCH_001SITE NUMBER:715342LOCATION:ROW ON WEST SIDE OF ROYAL PALM DR NORTHOF ATLANTIC BLVDJACKSONVILLE, FL 32233DUVAL COUNTYMOT-1MOT DETAILSE-5ELECTRICAL ROUTING PLANE-6ELECTRICAL DETAILSE-7ELECTRICAL PROFILEMOT-2FDOT MOT INDEX 102-600MOT-3FDOT MOT INDEX 102-602INSTALLATION OF PROPOSED SMALL CELL EQUIPMENT ON POLE:A.INSTALLATION OF PROPOSED POLEB.INSTALLATION OF ANTENNAS ON POLEC.INSTALLATION OF ENCLOSURE CABINET ON POLED.INSTALLATION OF UNDERGROUND ELECTRICAL SERVICE TO PROPOSEDPOLE
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONN-1DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23NOTESGENERAL NOTES1. FOR THE PURPOSES OF THESE CONSTRUCTION DRAWINGS. THE FOLLOWING DEFINITIONS SHALL APPLY:OWNER - VERIZON WIRELESSENGINEER - CBVR TELECOM DESIGN GROUPCONTRACTOR - GENERAL CONTRACTOR (CONSTRUCTION)2. PRIOR TO SUBMITTING HIS BID. THE CONTRACTOR SHALL VISIT THE JOB SITE IN ORDER TO (1) VERIFY ALL EXISTING CONDITIONS, (2)CONFIRM WHETHER ALL DIMENSIONS ARE AS SHOWN ON THE PLANS AND (3) CONFIRM WHETHER THE WORK MAY BE ACCOMPLISHED ASSHOWN. ANY DISCREPANCIES SHALL BE BROUGHT TO THE ATTENTION OF THE CONSTRUCTION MANAGER.3. A 9-FOOT (MIN) HORIZONTAL CLEARANCE DISTANCE SHALL BE MAINTAINED FROM ALL EXISTING POWER LINES.4. THE CONTRACTOR'S USE OF A CONSTRUCTION STAGING AREA SHALL BE COORDINATED WITH THE OWNER WELL IN ADVANCE OF THECONSTRUCTION START DATE.5. LABOR, MATERIAL, TOOLS, EQUIPMENT, TRANSPORTATION AND TEMPORARY POWER SERVICES NECESSARY FOR AND INCIDENTAL TOCOMPLETION OF ALL WORK SHALL BE PROVIDED AS INDICATED ON THE DRAWINGS AND/OR AS SPECIFIED HEREIN. LABOR AND MATERIALSSHALL BE FURNISHED AS REQUIRED FOR COMPLETE SYSTEMS. INCLUDING ALL ELEMENTS OBVIOUSLY OR REASONABLY INCIDENTAL TO ACOMPLETE INSTALLATION, WHETHER OR NOT SPECIFICALLY INDICATED ON THE PLANS.6. FOR TASKS REQUIRED TO BE PERFORMED BUT NOT CLEARLY DEFINED OR IDENTIFIED BY THE CONTRACT DOCUMENTS. THE CONTRACTORSHALL NOT START WORK ON SUCH TASKS WITHOUT HAVING RECEIVED WRITTEN AUTHORIZATION FROM THE CONSTRUCTION MANAGER TOPROCEED.7. THE DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE GENERAL ARRANGEMENT OF SYSTEMS AND EQUIPMENT UNLESS OTHERWISEINDICATED BY DIMENSIONS OR DETAILS, EXACT EQUIPMENT LOCATIONS MAY BE MODIFIED AS REQUIRED BY ACTUAL FIELD CONDITIONS. IFTHE SPECIFIED EQUIPMENT CANNOT BE INSTALLED AS SHOWN ON THESE DRAWINGS, CONTRACTOR SHALL PROPOSE AN ALTERNATIVEINSTALLATION FOR APPROVAL BY THE ENGINEER AND THE CONSTRUCTION MANAGER.8. THE CONTRACTOR SHALL OBTAIN, PAY FOR AND DELIVER ALL REQUIRED PERMITS. CERTIFICATES OF INSPECTION, INCLUDING UTILITYCONNECTION FEES, ETC., REQUIRED BY THE AUTHORITIES HAVING JURISDICTION AND SHALL DELIVER SUCH DOCUMENTS TO THE OWNERPRIOR TO FINAL ACCEPTANCE OF THE WORK.9. THE CONTRACTOR'S OPERATIONS SHALL BE CONFINED TO AREAS OF NEW CONSTRUCTION.10. ALL NECESSARY PROVISIONS SHALL BE MADE TO PROTECT EXISTING IMPROVEMENTS, PAVING, CURBS, GALVANIZED SURFACES, ETC. ANDTHE CONTRACTOR SHALL BE RESPONSIBLE FOR ANY DAMAGE TO SAME RESULTING FROM THE CONSTRUCTION WORK. ALL DISTURBED ANDDAMAGED AREAS SHALL BE RESTORED TO THEIR ORIGINAL CONDITION OR BETTER UPON COMPLETION OF ALL WORK TO THE SATISFACTIONOF THE CONSTRUCTION MANAGER.11. THE FOLLOWING CLEANUP TASKS SHALL BE PERFORMED AS FOLLOWS: (1) ON A DAILY BASIS. KEEP THE GENERAL AREA CLEAN AND HAZARDFREE, REMOVING ALL WASTE, DEBRIS AND TRASH FROM THE SITE AND DISPOSING OF SAME IN A LEGAL MANNER. (2) UPON COMPLETION.LEAVE THE PREMISES IN A CLEAN CONDITION AND FREE FROM PAINT SPOTS, DUST, OR SMUDGES OF ANY NATURE.12. ALL EQUIPMENT AND MATERIALS SHALL BE INSTALLED IN ACCORDANCE WITH THE RESPECTIVE MANUFACTURER'S RECOMMENDATIONSEXCEPT WHERE IT IS SPECIFICALLY INDICATED OTHERWISE IN THE CONTRACT DOCUMENTS OR WHERE LOCAL CODES OR REGULATIONSTAKE PRECEDENCE.13. ALL WORK PERFORMED AND MATERIALS INSTALLED SHALL BE IN STRICT ACCORDANCE WITH ALL APPLICABLE CODES, REGULATIONS ANDORDINANCES. THE CONTRACTOR SHALL GIVE ALL NOTICES AND COMPLY WITH ALL LAWS. ORDINANCES, RULES, REGULATIONS AND LAWFULORDERS OF ANY PUBLIC AUTHORITY HAVING JURISDICTION OVER THE PERFORMANCE OF THE WORK. MECHANICAL AND ELECTRICALSYSTEMS SHALL BE INSTALLED IN ACCORDANCE WITH ALL APPLICABLE MUNICIPAL AND UTILITY COMPANY SPECIFICATIONS AS WELL ASLOCAL AND STATE CODES. ORDINANCES AND APPLICABLE REGULATIONS.14. THE CONTRACTOR SHALL SUPERVISE AND DIRECT THE WORK AT ALL TIMES. USING THE BEST SKILLS AND ATTENTION. HE SHALL BE SOLELYRESPONSIBLE FOR ALL OF THE CONSTRUCTION MEANS. METHODS. TECHNIQUES. SEQUENCES AND PROCEDURES AND FOR COORDINATINGALL PORTIONS OF THE WORK. INCLUDING CONTACT AND COORDINATION WITH THE CONSTRUCTION MANAGER AND WITH THE OWNER'SAUTHORIZED REPRESENTATNE.15. WITHIN TEN (10) WORKING DAYS AFTER PROJECT COMPLETION. THE CONTRACTOR SHALL PROVIDE A COMPLETE SET OF AS-BUILTDRAWINGS. SWEEP TEST. CYLINDER TESTS. LIEN RELEASES. AND OTHER CLOSEOUT DOCUMENTATION AS REQUIRED BY THE OWNER. ALLSYSTEMS SHALL BE COMPLETELY ASSEMBLED, TESTED, ADJUSTED AND DEMONSTRATED TO BE READY FOR OPERATION PRIOR TO THEOWNER'S ACCEPTANCE.16. THE PROPOSED INSTALLATION WILL NOT:·INTERFERE WITH THE SAFE OPERATION OF TRAFFIC CONTROL EQUIPMENT;·INTERFERE WITH SIGHT LINES OR CLEAR ZONES FOR TRANSPORTATION, PEDESTRIANS, OR PUBLIC SAFETY PURPOSES;·INTERFERE WITH COMPLIANCE WITH THE AMERICANS WITH DISABILITIES ACT OR SIMILAR FEDERAL OR STATE STANDARDSVERIZON WIRELESS MEETS ALL FCC PLANNING IN REGARDS TO FREQUENCY AND POWER ASSIGNMENTS. THIS TAKES INTO ACCOUNT PUBLICSAFETY AS WELL AS COMMERCIAL DEPLOYMENTS OF WIRELESS SYSTEMS. IN DOING SO, ISSUES WITH INTERFERENCE ARE VERY RARE BYDESIGN AND VERIZON WIRELESS ADHERES, TO ESTABLISHED FCC PROCEDURES SHOULD ANYTHING ARISE.SITE WORK NOTES1. THE APPROPRIATE UTILITY LOCATING SERVICES SHALL BE CONTACTED PRIOR TO THE START OF CONSTRUCTION IN ORDER TO VERIFY THEEXACT LOCATION OF ALL EXISTING UNDERGROUND UTILITIES.2. THE INSTALLATION OF NEW UTILITIES SHALL BE COORDINATED WITH LOCAL AUTHORITIES.3. ALL EXISTING ACTIVE SEWER, WATER, GAS. ELECTRIC AND OTHER UTILITIES, WHERE ENCOUNTERED IN THE WORK, SHALL BE PROTECTED ATALL TIMES. WHERE REQUIRED FOR THE PROPER EXECUTION OF THE WORK, SUCH UTILITIES SHALL BE RELOCATED BY THE CONTRACTOR ASDIRECTED BY THE CONSTRUCTION MANAGER. EXTREME CAUTION SHALL BE USED WHEN EXCAVATING OR DRILLING PIERS AROUND OR NEARUTILITIES.4. RUBBISH, STUMPS, DEBRIS, STICKS, STONES AND OTHER REFUSE SHALL BE REMOVED FROM THE SITE AND DISPOSED OF LEGALLY.5. ALL EXISTING INACTIVE SEWER, WATER, GAS, ELECTRIC AND OTHER UTILITIES THAT INTERFERE WITH THE EXECUTION OF THE WORK SHALLBE REMOVED AND/OR CAPPED, PLUGGED OR OTHERWISE DISCONTINUED AT POINTS THAT WILL NOT INTERFERE WITH THE EXECUTION OFTHE WORK, SUBJECT TO THE APPROVAL OF THE CITY AND/OR LOCAL UTILITIES.6. DISTURBANCE TO THE EXISTING SITE DURING CONSTRUCTION SHALL BE MINIMIZED.7. ANY AREAS OF THE CONSTRUCTION SITE DISTURBED BY THE WORK AND NOT COVERED BY THE TOWER, EQUIPMENT OR DRIVEWAY, SHALLBE GRADED TO A UNIFORM SLOPE. SUCH GRADING SHALL CAUSE SURFACE WATER TO FLOW AWAY FROM ANY EQUIPMENT AND POLE AREASAND THE SOIL SHALL BE STABILIZED TO PREVENT EROSION. EROSION CONTROL MEASURES REQUIRED DURING CONSTRUCTION, SHALL BE INCONFORMANCE WITH THE LOCAL GUIDELINES FOR EROSION AND SEDIMENT CONTROL.8. THE SUB-GRADE SHALL BE COMPACTED AND BROUGHT TO A UNIFORM GRADE PRIOR TO FINISHED SURFACE APPLICATION.9. BACKFILL SHALL CONSIST OF CLEAN SAND FILL APPROVED FOR USE BY THE ENGINEER. NO UNAPPROVED MATERIAL WILL BE ALLOWED.CLEAN SAND FILL SHALL BE FREE OF ALL ROOTS, BOULDERS, OR OTHER DELETERIOUS MATERIAL.10. THE CONTRACTOR SHALL RESTORE ALL DISTURBED AREAS TO EQUAL TO OR BETTER CONDITION THAN ORIGINAL.11. SITE SIGNAGE SHALL BE PROVIDED IN ACCORDANCE WITH THE TECHNICAL SPECIFICATIONS FOR SUCH SIGNAGE AS MAY BE CONTAINED INTHESE DRAWINGS.STRUCTURAL STEEL NOTES1. MATERIAL:A. ALL STRUCTURAL STEEL WORK SHALL CONFORM TO THE LATEST EDITION OF THE AISC "STEEL CONSTRUCTION MANUAL".B. ALL STRUCTURAL STEEL WF BEAMS SHALL BE ASTM A992 AND "HOT DIPPED" GALVANIZED IN ACCORDANCE WITH ASTM A123 AND ASTMA153 STANDARDS.C. ALL STRUCTURAL PLATES, ANGLES. AND CHANNELS SHALL BE ASTM A36 AND ”HOT DIPPED" GALVANIZED IN ACCORDANCE WITH ASTMA123 AND ASTM A153 STANDARDS.D. ALL TS MEMBERS SHALL BE ASTM A500 GRADE B (Fy=46ksi), AND ”HOT DIPPED" GALVANIZED IN ACCORDANCE WITH ASTM A123 AND ASTMA153 STANDARDS.E. ALL STRUCTURAL PIPE MEMBERS SHALL BE ASTM A500 GRADE B (Fy-42ksi), AND ”HOT DIPPED" GALVANIZED IN ACCORDANCE WITH ASTMA123 AND ASTM A153 STANDARDS.F. ALL NON-STRUCTURAL PIPE MEMBERS SHALL BE ASTM A53 GRADE B, AND "HOT DIPPED" GALVANIZED IN ACCORDANCE WITH ASTM A123AND ASTM A153 STANDARDS.2. DESIGN, FABRICATION, AND CONSTRUCTION OF ALL CONNECTIONS SHALL CONFORM TO AISC STEEL CONSTRUCTION MANUAL.3. WELDING:A. ALL WELDS, WELDERS, AND WELD INSPECTIONS SHALL CONFORM TO THE REQUIREMENTS OF AWS D 1.1, LATEST REVISION.B. ALL WELDS SHALL BE MADE WITH E70XX LOW HYDROGEN ELECTRODES.C. ALL STEEL SHALL BE SPRAY GALVANIZED AFTER WELDING.4. ALL BOLTS SHALL BE GALVANIZED 3/4" DIAMETER, A325-N, UNLESS NOTED OTHERWISE AND TIGHTENED TO A “SNUG TIGHT'” CONDITION ASDEFINED BY AISC. SECURE NUT WITH LOCKING WASHER.5. ANCHOR BOLTS SHALL CONFORM TO ASTM A307, UNLESS NOTED OTHERWISE.6. THE CONTRACTOR/STEEL FABRICATOR SHALL LOCATE ANY REINFORCEMENT IN THE STRUCTURAL MEMBERS IN SUCH A MANNER SO THATTHERE WILL NOT BE CONFLICT WITH THE REINFORCEMENT WHEN INSTALLING ANCHORS. THE ANCHORS SHALL BE INSTALLED PER THEMANUFACTURER'S INSTRUCTION.7. THE CONTRACTOR/STEEL FABRICATOR SHALL CONFORM TO THE MINIMUM EDGE DISTANCE REQUIREMENTS IN ACCORDANCE WITH THE AISCMANUAL OF STEEL CONSTRUCTION.8. ALL STRUCTURAL STEEL SHALL BE FABRICATED TO FIT AT BOLTED CONNECTIONS WITHIN 1/16 INCH TOLERANCE. STRUCTURAL STEEL SHALLNOT BE FLAME CUT UNDER ANY CIRCUMSTANCES WITHOUT APPROVAL OF THE ENGINEER.9. THE CONTRACTOR/STEEL FABRICATOR SHALL CAP OR SEAL ALL PIPES AS REQUIRED TO PREVENT RAINWATER INTRUSION.10. THE CONTRACTOR/STEEL FABRICATOR SHALL SUBMIT SHOP DRAWINGS FOR REVIEW PRIOR TO ANY STEEL FABRICATION. AT THECONTRACTOR'S OPTION, FIELD SPLICES MAY BE USED FOR ERECTION PURPOSES. IF FIELD SPLICES ARE USED. THE SHOP DRAWINGS SHALLINCLUDE ALL DETAILS FOR THE PROPOSED FIELD SPLICES.11. AT THE CONTRACTOR'S OPTION, SHOP WELDS MAY BE USED INSTEAD OF FIELD WELDS.12. SUBMIT ORIGINAL SHOP DRAWINGS. INCLUDING COMPLETE DETAILS. SCHEDULES OF FABRICATION AND ASSEMBLY, PROCEDURES, ANDDIAGRAMS. INCLUDE DETAILS OF CUTS, CONNECTIONS, CAMBER, HOLE, AND OTHER PERTINENT DATA. INDICATE WELDS BY STANDARD AWSA2.1 AND A2.4 SYMBOLS, AND SHOW SIZE, LENGTH, AND TYPE OF WELD. PROVIDE SETTING DRAWINGS, TEMPLATES, AND DIRECTIONS FORINSTALLATION OF ANCHOR BOLTS AND OTHER ANCHORAGES TO BE INSTALLED AS WORK OF OTHERS' SECTIONS.
UGF
UGFUGFOH OH OH OH OH OH OH OHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH
SITE PLAN W/AERIALPREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONC-1DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22SITE PLAN W/ AERIALISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.2310' 20'11x17 SCALE: 1"=20'GRAPHIC SCALE(SCALE IN FEET)0'CONSTRUCTION NOTE:ANY CONSTRUCTION AT THE SITE WILL USE BEST MANAGEMENT PRACTICES INCLUDINGSOIL EROSION CONTROL MEASURES, AS ALSO REQUIRED BY LOCAL JURISDICTION, ANDNOTED ON THE ONSTRUCTION DRAWING.NOTES:·CONTRACTOR SHALL RESTORE AND REPAIR ANY DAMAGED AREAS CAUSED BYCONSTRUCTION TO ORIGINAL OR BETTER CONDITION·ALL NEW WORK TO BE PERFORMED PER LATEST VERIZON WIRELESS STANDARDS &SPECIFICATIONSPROPOSED POLELOCATION VIEWPROPOSED POLE LOCATIONLATITUDE: 30° 19' 29.0400" NORTHLONGITUDE: 81° 24' 33.1300" WESTELEVATION = 10.1' NAVD 88PROPOSED TOP OF POLE HEIGHT: 41.0' AGLPROPOSED TOP OF ANTENNA HEIGHT: 45.0' AGLUTILITY LINE LEGENDRCWRCWUG/EUG/EGASGASSSSSUGFUGFWTRWTREXISTING UNDERGROUND FIBEREXISTING UNDERGROUND ELECTRICEXISTING UNDERGROUND GASEXISTING UNDERGROUND SANITARY SEWEREXISTING UNDERGROUND STORM SEWEREXISTING UNDERGROUND WATER EXISTING UNDERGROUND RECLAIMED WATER EXISTING OVERHEAD UTILITY WIRESEXISTING ROW/ PROPERTY LINEPROPOSED OVERHEAD ELECTRICOHOHOHOHSTSTROYAL PALMS DRIVE60' RIGHT-OF-WAY - PER DEEDS2-LANE ASPHALT ROADTAX PARCEL: 177641-0000OWNER: JAX FEDERAL CREDIT UNIONO.R. 12936, PAGE 975ATLANTIC AVENUE
100' RIGHT-OF-WAY - PER DEED
MULTI-LANE DIVIDED ASPHALT ROADCONCRETE APRONR/W LINER/W LINE1.1' TO ROW8.2' TO BACK OF CURBCONCRETE SIDEWALKEXISTING CONCRETE POWER POLETOP OF POLE ELEVATION=52.6' NAVD88TOP OF WIRE ELEVATION=54.1' NAVD88POLE HEIGHT=42.4' AGLTRAFFIC SIGN POLE WITH MAST ARMELECTRIC JUNCTION BOXFIBER JUNCTION BOX (TYPICAL)CURB & GUTTER (TYPICAL)EXISTING METAL LIGHT POLETOP OF POLE ELEVATION=32.8' NAVD88POLE HEIGHT=22.3' AGLCABLE BOXFIBER MARKERTELEPHONE MANHOLE(TYPICAL)WOOD POWER POLE
UGF
UGFUGFOH OH OH OH OH OH OH OHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH OH
SITE PLANPREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONC-2DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22SITE PLANISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.2310' 20'11x17 SCALE: 1"=20'GRAPHIC SCALE(SCALE IN FEET)0'CONSTRUCTION NOTE:ANY CONSTRUCTION AT THE SITE WILL USE BEST MANAGEMENT PRACTICES INCLUDINGSOIL EROSION CONTROL MEASURES, AS ALSO REQUIRED BY LOCAL JURISDICTION, ANDNOTED ON THE ONSTRUCTION DRAWING.NOTES:·CONTRACTOR SHALL RESTORE AND REPAIR ANY DAMAGED AREAS CAUSED BYCONSTRUCTION TO ORIGINAL OR BETTER CONDITION·ALL NEW WORK TO BE PERFORMED PER LATEST VERIZON WIRELESS STANDARDS &SPECIFICATIONSUTILITY LINE LEGENDRCWRCWUG/EUG/EGASGASSSSSUGFUGFWTRWTREXISTING UNDERGROUND FIBEREXISTING UNDERGROUND ELECTRICEXISTING UNDERGROUND GASEXISTING UNDERGROUND SANITARY SEWEREXISTING UNDERGROUND STORM SEWEREXISTING UNDERGROUND WATER EXISTING UNDERGROUND RECLAIMED WATER EXISTING OVERHEAD UTILITY WIRESEXISTING ROW/ PROPERTY LINEPROPOSED OVERHEAD ELECTRICOHOHOHOHSTSTROYAL PALMS DRIVE60' RIGHT-OF-WAY - PER DEEDS2-LANE ASPHALT ROADTAX PARCEL: 177641-0000OWNER: JAX FEDERAL CREDIT UNIONO.R. 12936, PAGE 975ATLANTIC AVENUE
100' RIGHT-OF-WAY - PER DEED
MULTI-LANE DIVIDED ASPHALT ROADCONCRETE APRONR/W LINER/W LINECONCRETE SIDEWALKEXISTING CONCRETE POWER POLETOP OF POLE ELEVATION=52.6' NAVD88TOP OF WIRE ELEVATION=54.1' NAVD88POLE HEIGHT=42.4' AGLTRAFFIC SIGN POLE WITH MAST ARMELECTRIC JUNCTION BOXFIBER JUNCTION BOX (TYPICAL)CURB & GUTTER (TYPICAL)EXISTING METAL LIGHT POLETOP OF POLE ELEVATION=32.8' NAVD88POLE HEIGHT=22.3' AGLCABLE BOXFIBER MARKERTELEPHONE MANHOLE(TYPICAL)WOOD POWER POLEPROPOSED POLE LOCATIONLATITUDE: 30° 19' 29.0400" NORTHLONGITUDE: 81° 24' 33.1300" WESTELEVATION = 10.1' NAVD 88PROPOSED TOP OF POLE HEIGHT: 41.0' AGLPROPOSED TOP OF ANTENNA HEIGHT: 45.0' AGL1.1' TO ROW8.2' TO BACK OF CURB
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONC-3DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23ELEVATION &EQUIPMENT PLANELEVATIONSCALE AS NOTEDNOTE:1.CONTRACTOR TO FIELD VERIFY ANTENNAMOUNT CONFIGURATION AND PROVIDEMOUNTS OR ADDITIONAL HARDWARE IFREQUIRED TO SUPPORT PROPOSEDEQUIPMENT.2.ALL EQUIPMENT AND MOUNTINGHARDWARE SHALL CONFORM TO DESIGNREQUIREMENTS PER FLORIDA BUILDINGCODE (7TH EDITION, 2020) AND ANSI/TIA-222-G STRUCTURAL STANDARD FORANTENNA SUPPORTING STRUCTURESAND ANTENNAS; BASIC WIND SPEED 96MPH, 3 SECOND GUST.3.AZIMUTH INFO TAKEN FROM VERIZONWIRELESS RF SITE DESIGN DATA. TOWERAND ANTENNAS HEIGHTS TAKEN FROMRECENT TOWER SURVEY DATA.4.REFERENCE LATEST STRUCTURALANALYSIS REPORT.2.5' 5'11x17 SCALE: 1"=5'GRAPHIC SCALE(SCALE IN FEET)0'CABINET LAYOUT3ANTENNA LAYOUT2EQUIPMENT LAYOUT4NTSNTSNTS1NOTE:1.CONTRACTOR TO FIELD VERIFY ANTENNAMOUNT CONFIGURATION AND PROVIDEMOUNTS OR ADDITIONAL HARDWARE IFREQUIRED TO SUPPORT PROPOSEDEQUIPMENT.2.ALL EQUIPMENT AND MOUNTINGHARDWARE SHALL CONFORM TO DESIGNREQUIREMENTS PER FLORIDA BUILDINGCODE (7TH EDITION, 2020) AND ANSI/TIA-222-G STRUCTURAL STANDARD FORANTENNA SUPPORTING STRUCTURESAND ANTENNAS; BASIC WIND SPEED ###MPH, 3 SECOND GUST.3.AZIMUTH INFO TAKEN FROM VERIZONWIRELESS RF SITE DESIGN DATA. TOWERAND ANTENNAS HEIGHTS TAKEN FROMRECENT TOWER SURVEY DATA.4.REFERENCE LATEST STRUCTURALANALYSIS REPORT.T/O PROPOSED VERIZON WIRELESS ANTENNAELEV. = 45' AGLPROPOSED VERIZON WIRELESSEQUIPMENT ENCLOSURE (VOLUME =28 CU FT OR LESS) W/ (1) DBC-AP-4SFDIPLEXER, (1) PROPOSED RRU8843(AND UP TO (2) FUTURE RADIOS)12.0'41'45'PROPOSED (4) 1/2" COAX TO BEROUTED INSIDE PROPOSED POLETOP OF PROPOSED POLEELEV. = 41' AGLPROPOSED VERIZON WIRELESS ANTENNARAD CENTER = 43.5' AGLC-32C-34PROPOSED SHEATHC-33SMALL CELL ANTENNA (TYP. OF 3)(VOLUME 0.463 CU FT EACH)FUTURE LAA ANTENNA (TYP. OF 3)(VOLUME 0.11 CU FT EACH)ALL ATTACHED HARDWARE AND EQUIPMENTTO BE PAINTED GRAY IN COLOR TO MATCHCITY LIGHT POLES, COORDINATE WITH CITYMANAGER ON EXACT COLOR. ANTENNA,SHROUD, U-GUARD, EQUIPMENT CABINET,METER & DISCONNECT.NOTE:FUTURE LAA ANTENNAS TO BEBANDED TO POLE. BANDS TO BEPAINTED GRAY.PROPOSED JMA CX14OMI236-1CANTENNA (VOLUME= 2.98+/- CF)9' EMBEDMENT ANTENNA NOTE:PROPOSED ANTENNA MODEL SUBJECT TOCHANGE, BUT OVERALL DIMENSIONS SHALL NOTEXCEED 3' HEIGHT BY 14” DIAMETER. VERIFY FINALMODEL TO BE INSTALLED WITH VZW RF AND CX PM5.0'PROPOSED 41' AGLSTEEL POLEPROPOSED VERIZON WIRELESSEQUIPMENT ENCLOSURE (VOLUME = 28CU FT OR LESS) W/ (1) DBC-AP-4SFDIPLEXER, (1) PROPOSED RRU8843(AND UP TO (2) FUTURE RADIOS)SMALL CELL ANTENNA (TYP. OF 3)(VOLUME 0.463 CU FT EACH)FUTURE LAA ANTENNA (TYP. OF 3)(VOLUME 0.11 CU FT EACH)AZ=
SECTOR A
0.00°PROPOSED VERIZONWIRELESS ANTENNAPROPOSED JMA CX14OMI236-1CANTENNA (VOLUME= 2.98+/- CF)NOTE:ABOVE POWER METERING ALLWIRING MUST BE INTERNAL TO POLEPROPOSED 10 POSITION NEMA 3RENCLOSURE W/ 100A SERVICE RATEDBREAKER TO BE INSTALLED BELOWPROPOSED METER ENCLOSUREPROPOSED 120/240V,100A, 1Ø ELECTRICALMETER (IF APPLICABLE)PROPOSED 41' AGLSTEEL POLE4.5'4.0'PROPOSED 10 POSITION NEMA3R ENCLOSURE W/ 100ASERVICE RATED BREAKERPROPOSED 120/240V,100A, 1Ø ELECTRICALMETER (IF APPLICABLE)MOUNTING DIRECTION NOTES:1. RADIO EQUIPMENT ENCLOSURE, POWER METERAND NEMA ENCLOSURE WITH PANEL ANDDISCONNECT TO BE MOUNTED PARALLEL TOTHE STREET, AWAY FROM ONCOMING TRAFFIC.PROPOSED 50' P10 SCH 40 STEEL POLE(PAINTED GRAY TO MATCH CITY LIGHTPOLES, COORDINATE WITH CITYMANAGER ON EXACT COLOR)
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONC-4DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23DETAILS (1 OF 2)FRONT VIEWSIDE VIEWTOP VIEWENCLOSURE SPECIFICATIONS3NTSHB687 - DEFINED CABINET BELOW OR SIMILARNOT TO EXCEED 28 CUBIC FEET.ENCLOSURE:DIMENSIONS (HxWxD)60"x28.64"x21.75"CUBIC FEET21 CU FTWEIGHTSEE STRUCTURALANALYSIS BYMANUFACTURERLAA ANTENNASMALL CELL ANTENNA2NTS1NTS1-8"8"SMALL CELL ANTENNAS TO BEFLUSH MOUNTED TO POLE.CONTRACTOR TO PROVIDE MOUNT.SMALL CELL ANTENNADIMENSIONS (LxWxD)........20"x8"x5"ANTENNA WEIGHT.............53 LBSVOL IN CUBIC FT. .............. 0.4637"7"LAA ANTENNAS TO BE BANDED TO POLE.CONTRACTOR TO PROVIDE MOUNT.LAA ANTENNADIMENSIONS (LxWxD)........7"x7"x4"ANTENNA WEIGHT.............12.24 LBSVOL IN CUBIC FT. .............. 0.11
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONC-5DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23DETAILS (2 OF 2)3NTS1NTS2NTSHB687 - DEFINES ANTENNA NOTTO EXCEED 6 CUBIC FEET.CONTRACTOR TO SUPPLY ANTENNA MOUNT.CONTRACTOR TO COORDINATE WITHANTENNA MANUFACTURER.NOT USEDANTENNA MOUNTING BRACKET DETAILALTERNATIVE LEG ARRANGEMENT TOFIT SMALLER POLES 5-1/4" Ø TO 7-1/8" Ø(MAST REMOVED FOR CLARITY)ARRANGEMENT FITS POLES7-1/8" Ø TO 14-1/8" ØUNIVERSAL ANTENNASLEEVE MOUNTLEG WELDMENTMAST WELDMENTECCENTRICWASHER PLATEBOLT, HEX, 5/8" -11UNC x 1.75" LG.LEG WELDMENTMAST WELDMENTECCENTRICWASHER PLATEBOLT, HEX, 5/8" -11UNC x 1.75" LG.ANTENNA SPECIFICATIONSNOTE:TYPICAL MOUNT SHOWN. CONTRACTOR TO VERIFY WITHVZW CX PM AND MANUFACTURER SPECIFICATIONS.ANTENNA NOTE:PROPOSED ANTENNA MODEL SUBJECT TOCHANGE, BUT OVERALL DIMENSIONS SHALL NOTEXCEED 3' HEIGHT BY 14” DIAMETER. VERIFY FINALMODEL TO BE INSTALLED WITH VZW RF AND CX PM
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-1DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23GENERAL1. ALL ELECTRICAL WORK SHALL CONFORM TO THE NATIONAL ELECTRICAL CODE (EDITION ADOPTED BY LOCAL JURISDICTION) AND APPLICABLELOCAL CODES.2. GROUNDING SHALL COMPLY WITH ARTICLE 250 OF THE NATIONAL ELECTRIC CODE.3. ALL ELECTRICAL EQUIPMENT AND ACCESSORIES SHALL BE U.L. APPROVED OR LISTED.4. ALL POWER WIRING SHALL BE STRANDED COPPER, TYPE THHN/THHW. AND 90 DEGREES C RATED.5. GROUNDING ELECTRODE CONDUCTORS SHALL BE BARE. TIN COATED COPPER AND EQUIPMENT GROUND CONDUCTORS SHALL BE GREENINSULATED. UNLESS OTHERWISE NOTED.6. ALL POWER WIRING SHALL BE INSTALLED IN GALVANIZED RIGID STEEL CONDUIT. PVC. OR FLEXIBLE LIQUIDTIGHT CONDUIT. AS INDICATED.7. CONTRACTOR SHALL OBTAIN ALL PERMITS. PAY PERMIT FEES. AND SCHEDULE INSPECTIONS.8. CONTRACTOR SHALL APPLY FOR ELECTRICAL SERVICE AS SOON AS POSSIBLE AND COORDINATE REQUIREMENTS. SERVICE ROUTING. ANDMETER SOCKET TYPE WITH LOCAL POWER COMPANY.9. CONTRACTOR SHALL APPLY FOR TELEPHONE SERVICE AS SOON AS POSSIBLE AND COORDINATE REQUIREMENTS AND SERVICE ROUTING WITHTELEPHONE COMPANY.10. PROVIDE ALL LABOR AND MATERIAL DESCRIBED ON THIS DRAWING. AND ALL ITEMS INCIDENTAL TO COMPLETING AND PRESENTING THISPROJECT AS FULLY OPERATIONAL.11. WHERE LONG POWER CABLE RUNS PREVAIL. CONTRACTOR SHALL CALCULATE THE VOLTAGE DROP AND SIZE WIRES AND CONDUITACCORDINGLY.12. WHERE TRANSFORMER IS REQUIRED FOR ELECTRICAL SERVICE. TRANSFORMER SECONDARY SHALL BE GROUNDED PER N.E.C.. ARTICLE 250-26.13. REFER TO SITE SPECIFIC DRAWINGS FOR ELEVATIONS.14. ALL ELECTRICAL DEVICES EXPOSED TO WEATHER SHALL BE OF RAINPROOF CONSTRUCTION AND SHALL REQUIRE WATER TIGHT CONDUITHUBS. NEMA 3R TYPICAL15. CONTRACTOR SHALL COIL CABLES AT HANDHOLE WITH LENGTHS AS REQUIRED BY ELECTRICAL UTILITY FOR CONNECTION.16. ALL UNDERGROUND SERVICE ENTRANCE POWER CABLES SHALL BE TYPE FOR SUCH USE. CONTRACTOR SHALL CALCULATE VOLTAGE DROPAND RE-SIZE CABLES PER NEC REQUIREMENTS FOR CABLE RUNS EXCEEDING 250 FEET.POWER CABLE AND SERVICE1. CONTRACTOR SHALL PROVIDE CONDUIT AND WIRING TO BTS AND VERIFY EXACT CONDUIT ROUTING. RACEWAY SYSTEM MATERIALS ANDDEVICES FURNISHED SHALL BE IN ACCORDANCE WITH APPLICABLE STANDARDS OF ANSI. NEMA. AND UL. RACEWAY SYSTEM COMPONENTSSHALL BE INSTALLED IN ACCORDANCE WITH APPLICABLE REQUIREMENTS OF THE N.E.C.2. CONTRACTOR SHALL SEAL AROUND ALL CONDUIT PENETRATIONS THROUGH WALLS, FLOORS AND ROOFS TO PREVENT MOISTUREPENETRATION OR VERMIN INFESTATION.3. CONDUCTORS RUNNING ALONG HORIZONTAL SURFACES (ROOF TOP OR SLAB) SHALL BE INSTALLED IN RIGID CONDUIT SUPPORTED ONELECTRICAL CONDUIT SUPPORT.4. ALL VERTICAL RUNS OF POWER CABLE EXCEEDING 80 FEET IN LENGTH SHALL BE SUPPORTED PER N.E.C. ARTICLE 300 USING KELLEMS GRIPSOR ACCEPTABLE EQUAL CABLE SUPPORT SYSTEM.5. WHERE A SEPARATE ELECTRICAL SERVICE DROP IS ADDED. CONTRACTOR SHALL INSTALL PERMANENT SERVICE DISCONNECT OR GROUPINGTHEREOF. DENOTING ALL OTHER SERVICE ENTRANCES. LOCATION OF EACH AND THE AREAS SERVED BY EACH.6. WHERE ELECTRICAL POWER IS TO BE SUB-FED FROM AN EXISTING DISTRIBUTION SYSTEM. THE FOLLOWING SHALL APPLY:A. CONTRACTOR SHALL PERFORM LOAD TESTING TO DETERMINE MAXIMUM FEEDER DEMAND PER N.E.C. ARTICLE 220-35B. CONTRACTOR SHALL VERIFY WHETHER EXISTING FEEDER CAPACITY EXCEEDS VALUE CALCULATED PER N.E.C. ARTICLE 220-35C. EACH BRANCH CIRCUIT PROTECTIVE DEVICE SHALL HAVE SAME INTERRUPTING RATING AS EQUIPMENT SUPPLYING IT.D. PREFERRED MEANS OF SUPPLY SHALL BE A BRANCH CIRCUIT PROTECTIVE DEVICE LOCATED IN EXISTING PANEL.E. IF A BRANCH CIRCUIT PROTECTIVE DEVICE CANNOT BE OBTAINED OR SPACE IS NOT AVAILABLE. A BRANCH CIRCUIT MAY BE TAPPED FROMEXISTING FEEDER CONDUCTORS USING AN INSTALLED 2-POLE FUSED DISCONNECT AND METER BASE PER N.E.C. ARTICLE 240-21 WITH TENFOOT (10) MAXIMUM TAP CONDUCTORS. FUSED DISCONNECT SHALL BE LISTED SAME OR BETTER INTERRUPTING RATING AS EXISTINGSOURCE OF SUPPLY.RF (COAX) AND LOW VOLTAGE CABLE1. RF CABLES AND LOW VOLTAGE CABLING BETWEEN BTS. LNA OR TMA AND ANTENNA SHALL BE SUPPORTED USING ANDREW ”SNAP-IN” HANGERSOR ACCEPTABLE EQUAL.IDENTIFICATION1. LOCATE NAMEPLATE. MARKING. OR OTHER IDENTIFICATION MEANS ON OUTSIDE EQUIPMENT OR BOX FRONT COVERS.2. PROVIDE NAMEPLATE ENGRAVED WITH EQUIPMENT DESIGNATION FOR EACH SAFETY SWITCH AND ALL OTHER ELECTRICAL CABINETS, ETC.3. DURING TRENCH BACK-FILLING FOR EACH UNDERGROUND ELECTRICAL, TELEPHONE, SIGNAL AND COMMUNICATIONS LINE, PROVIDE ACONTINUOUS UNDERGROUND WARNING TAPE TWELVE INCHES BELOW FINISHED GRADE.ELECTRICAL NOTES
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-2DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23UTILITY ROUTING/ ONE-LINEDIAGRAM/ PANEL SCHEDULEPANEL SCHEDULE3NTSUTILITY ROUTING1NTSONE-LINE DIAGRAM2NTST/O PROPOSED VERIZON WIRELESS ANTENNAELEV. = 45' AGLTOP OF PROPOSED POLEELEV. = 41' AGLPROPOSED VERIZON WIRELESS ANTENNARAD CENTER = 43.5' AGLPROPOSED SHEATHSMALL CELL ANTENNA (TYP. OF 3)(VOLUME 0.463 CU FT EACH)FUTURE LAA ANTENNA (TYP. OF 3)(VOLUME 0.11 CU FT EACH)PROPOSED JMA CX14OMI236-1CANTENNA (VOLUME= 2.98+/- CF)PROPOSED (4) 1/2" COAX TO BEROUTED INSIDE PROPOSED POLEPROPOSED 2" Ø CONDUIT FORFIBER (FIBER COUNT TO BEDETERMINED)PROPOSED VERIZON WIRELESSEQUIPMENT ENCLOSURE (VOLUME =28 CU FT OR LESS) W/ (1) DBC-AP-4SFDIPLEXER, (1) PROPOSED RRU8843(AND UP TO (2) FUTURE RADIOS)NOTE:ABOVE POWER METERING ALLWIRING MUST BE INTERNAL TO POLE(3) #3 IN 2" Ø CONDUIT FORPROPOSED ELECTRICALSERVICEPROPOSED 10 POSITION NEMA3R ENCLOSURE W/ 100ASERVICE RATED BREAKERPROPOSED 120/240V,100A, 1Ø ELECTRICALMETER (IF APPLICABLE)RRU 8843(3) #3 IN 2"Ø CONDUITSOURCEMPSU0815APROPOSED 10 POSITION NEMA3R ENCLOSURE W/ 100ASERVICE RATED BREAKERPSU0815ARRU 4408(2) #14, (1) #14 IN1"Ø CONDUIT EACHMANUFACTURER SUPPLIEDPRE-CONNECTORIZEDCABLING(2) #14 & (1) #14 IN1"Ø CONDUIT EACH15A15A15A6701(2) #14, (1) #14 IN1"Ø CONDUIT EACH67016701ELECTRICAL NOTE:VERIFY FINAL CONFIGURATION OF ALL EQUIPMENT,BREAKERS, CONDUITS, AND CONDUCTORS WITH VERIZONCONSTRUCTION MANAGER PRIOR TO INSTALLATION.15A2" DIAMETER CONDUIT FROM POWERSOURCE WITH CONDUCTORS ASLISTED IN SERVICE ENTRANCECONDUCTOR SIZING TABLE (SHEET E-6)PROPOSED VERIZON WIRELESS100A. 120/240V, 1Ø ELECTRICALMETER (IF APPLICABLE)MOUNTING DIRECTION NOTES:1. RADIO EQUIPMENT ENCLOSURE, POWER METER AND NEMAENCLOSURE WITH PANEL AND DISCONNECT TO BE MOUNTEDPARALLEL TO THE STREET, AWAY FROM ONCOMING TRAFFIC.PROPOSED 50' P10 SCH 40 STEEL POLE(PAINTED GRAY TO MATCH CITY LIGHTPOLES, COORDINATE WITH CITYMANAGER ON EXACT COLOR)PANEL NAME: VERIZON WIRELESSLOCATION: NEPTUNE BCH_001 - 715342PANEL RATING100 AMPS120/240 VOLTSPHASE 1X MCB 100 AMPWIRE3MAIN LUG ONLYCKTNO.DESCRIPTIONKVAA BAMPPOLEWIRE GND COND.12345678SPACESPACE1.015/11"--------------SUB TOTAL KVA (CONT)SUB TOTAL KVA (NON-CONT)TOTAL KVANON-CONT + 125% CONT.TOTAL AMPS01.801.83.6156701-4408-PSU081.015/11"PSU08--0.2415/1 #141"0.40670167010.400.4015/115/115/1#14#14#141"1"1"#14#14#14#14#14#14#14#149------------10------------NOTE:THE ELECTRICAL SYSTEM IS DESIGNED TO ACCOMMODATE A MAXIMUM DEMAND LOAD OF 15A. IF ADDITIONALEQUIPMENT IS INSTALLED THAT EXCEEDS THE DESIGN DEMAND LOAD, THE SYSTEM SHALL BE REEVALUATEDAND MODIFIED AS NECESSARY.SPACESPACE
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-3DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23NOTE:ABOVE POWER METERING ALLWIRING MUST BE INTERNAL TO POLEGROUNDING DETAIL& NOTES2NTS1NTSGENERAL1. INSTALLATION OF GROUNDING ELECTRODE SYSTEM SHALL COMPLY WITH ARTICLE 250 OF THE NATIONAL ELECTRIC CODE AND WITHBUILDING CODES OF AUTHORITIES HAVING JURISDICTION.2. GROUNDING CONDUCTORS SHALL BE 2 AWG TINNED SOLID BARE COPPER BELOW AND ABOVE GRADE. UNLESS OTHERWISE NOTED ANDSHALL BE ROUTED IN A DOWNWARD PATH TOWARDS GROUND BARS.3. GROUNDING CONDUCTORS SHALL BE KEPT AS SHORT AND DIRECT AS POSSIBLE WITH MINIMUM BEND RADIUS OF 12 INCHES.4. ALL BELOW GRADE CONNECTIONS SHALL BE CADWELD TYPE CONNECTIONS AND ALL CONNECTIONS TO EQUIPMENT AND GROUND BARSSHALL BE 2-HOLE BRONZE COMPRESSION CONNECTORS UNLESS OTHERWISE NOTED.5. CONTRACTOR SHALL INSTALL NEW GROUNDING SYSTEM PER SPECIFICATIONS AND INTERCONNECT NEW SYSTEMS TO ANY EXISTINGGROUNDING SYSTEMS AS REQUIRED BY NFPA 70 AND 780 (THIS APPLIES TO ELECTRICAL POWER DISTRIBUTION GROUNDING SYSTEM,LIGHTNING PROTECTION GROUNDING SYSTEM. COAX CABLE GROUNDING SYSTEM AND ANY OTHER EXISTING GROUNDING SYSTEMS).6. GROUNDING CONDUCTORS SHALL BE BONDED TO ANTENNA FRAME AND ANY SUPPORT FRAMES OR RACKS USING CADWELD ORMECHANICAL CONNECTIONS.7. CONTRACTOR SHALL PROVIDE LOCK WASHERS FOR ALL MECHANICAL CONNECTIONS FOR GROUND CONDUCTORS. STAINLESS STEELHARDWARE SHALL BE USED THROUGHOUT.8. GROUNDING CONDUCTORS EMBEDDED IN CONCRETE SHALL BE ENCASED IN PVC CONDUIT. NO METALLIC CONDUIT SHALL BE USED FORGROUNDING CONDUCTORS UNLESS REQUIRED BY LOCAL CODES OR OTHERWISE INDICATED ON DRAWINGS. CONTRACTOR SHALL SEALAROUND ALL CONDUIT PENETRATIONS TO PREVENT MOISTURE PENETRATION AND VERMIN INFESTATION.9. CONTRACTOR SHALL BOND GROUNDING SYSTEM VIA THE MASTER GROUND BAR TO ALL METAL OBJECTS WITHIN 12 FEET OF EQUIPMENT,CONDUIT AND CABLES.10. BONDING OF GROUNDED CONDUCTOR (NEUTRAL) AND GROUNDING CONDUCTOR SHALL BE AT SERVICE DISCONNECTING MEANS. BONDINGJUMPER SHALL BE INSTALLED PER N.E.C. ARTICLE 250-28.11. CONTRACTOR SHALL VERIFY EXACT CONDUIT ROUTING FOR GROUNDING CONDUCTORS WHERE APPLICABLE.12. CONNECTIONS TO CGB SHALL BE ARRANGED IN THE FOLLOWING THREE GROUPS:* SURGE PRODUCERS (COAXIAL CABLE GROUND KITS, TELCO CABINET AND POWER PEDESTAL GROUND).* SURGE ABSORBERS (GROUNDING ELECTRODE RING OR BUILDING STEEL).* NON-SURGING OBJECTS (EGB GROUND IN BTS).13. DOUBLING OR STACKING OF ANY GROUNDING CONNECTIONS IS NOT ACCEPTABLE.14. ALL GROUND BARS SHALL BE INSTALLED WITH STAND OFF INSULATORS.PREPARATION1. SURFACES: ALL CONNECTIONS SHALL BE MADE TO BARE METAL. ALL PAINTED SURFACES SHALL BE FIELD INSPECTED TO ENSURE PROPERCONTACT. ALL GALVANIZED SURFACES ON WHICH GALVANIZING HAS BEEN REMOVED BY CUTTING, DRILLING, OR ANY OTHER OPERATIONSHALL BE RE-GALVANIZED IN ACCORDANCE WITH ASTM A780 USING "ZINC RICH" COATING AS MANUFACTURED BY ZRC CHEMICAL PRODUCTSCOMPANY (LOCATED IN QUINCY, MASSACHUSETTS), OR ACCEPTABLE EQUAL. NO WASHERS ARE ALLOWED BETWEEN ITEMS BEINGGROUNDED. ALL CONNECTIONS ARE TO HAVE A NON-OXIDIZING AGENT ("COPPER SHIELD") APPLIED PRIOR TO INSTALLATION.2. GROUND BAR: ALL COPPER GROUND BARS SHALL BE CLEANED, POLISHED AND A NON-OXIDIZING AGENT (”COPPER SHIELD") APPLIED. NOFINGER PRINTS OR DISCOLORED COPPER SHALL BE PERMITTED.LAND BUILDS AND CO-LOCATE1. THE GROUND ELECTRODE SYSTEM SHALL CONSIST OF DRIVEN GROUND RODS UNIFORMLY SPACED AROUND THE EQUIPMENT FOUNDATIONAND AROUND THE PERIMETER OF THE TOWER FOUNDATION. THE GROUND RODS SHALL BE 96” X 10'-O' COPPER CLAD STEELINTERCONNECTED WITH 2 SOLID TINNED BARE COPPER GROUND CONDUCTOR TO FORM A GROUND RING AT A DEPTH OF 30 INCHES BELOWTHE SURFACE OF THE SOIL. A MINIMUM OF 1 FOOT AND A MAXIMUM OF 3 FEET CLEARANCES SHALL BE MAINTAINED FROM FOUNDATIONS.TOWER AND EQUIPMENT GROUND RINGS SHALL BE INTERCONNECTED WITH TWO GROUNDING CONDUCTORS OF EQUAL LENGTH ANDMATERIALS.2. GROUND RODS SHALL BE BONDED TO GROUND RINGS AND INTERCONNECTING CONDUCTORS AT EQUAL INTERVALS OF APPROXIMATELY 10FEET.3. GROUND BARS SHALL BE BONDED TO GROUND RING WITH SINGLE GROUNDING CONDUCTOR.4. BONDS TO ANTENNA MASTS, FENCE POSTS, WAVEGUIDE BRIDGE, TOWER STEEL (UNLESS PROHIBTTED BY TOWER MANUFACTURER) ANDTHOSE BELOW GRADE SHALL BE EXOTHERMIC TYPE (CADWELD). ALL OTHER BONDS SHALL BE BRONZE 2-HOLE COMPRESSION FITTINGSUNLESS OTHERWISE NOTED.5. GROUNDING CONDUCTORS MAKING A TRANSITION FROM ABOVE TO BELOW GRADE SHALL BE INSULATED FROM EARTH CONTACT BYPASSING THROUGH PVC CONDUIT. THE CONDUIT SHALL EXTEND AT LEAST 6 INCHES ABOVE AND 12 INCHES BELOW GRADE LEVEL.GROUNDING REQUIREMENTS1. CONTRACTOR SHALL INSPECT AND TEST ANY NEW OR EXISTING VERIZON WIRELESS GROUNDING SYSTEM WITH A BIDDLE-MEGGER TESTERUTILIZING THE FALL OF POTENTIAL METHOD AND CONTACT CONSTRUCTION MANAGER IF RESISTANCE EXCEEDS 5 OHMS AND SHALL FIELDMODIFY GROUNDING SYSTEM AS NECESSARY TO ACHIEVE COMPLIANCE. TEST RESULTS AND CONCLUSIONS SHALL BE RECORDED FORPROJECT CLOSE-OUT DOCUMENTATION.2. COAX CABLE OUTER CONDUCTORS (SHIELDS) SHALL BE GROUNDED USING COAX GROUNDING KITS AT A MINIMUM OF TWO POINTS.INCLUDING AT ANTENNA AND AT MASTER GROUND BAR. THE COAXIAL CABLE SHALL NOT EXCEED 1OO FEET BETWEEN GROUNDING KITS.GROUNDING NOTESTYPICAL GROUNDING DETAIL6'-0" MINIMUM(CAN SHIFT IN ANYDIRECTION AS NEEDED)#2 AWG BOND TO PROPOSEDGROUND ROD MINIMUM 6"BELOW GRADE (TYP. OF 2).SEE NOTES 1 & 11.PROPOSED SERVICE GROUND ROD5/8" x 8' COPPERCLAD (TYP. OF 2)EXAMPLE 5G ONLYANTENNA DETAIL QTY 3NTSSEE NOTE 1.SEE NOTE 7.NOTES:1. ALL CONNECTIONS SHALL BE MADE USING UL RATEDCOMPRESSION CONNECTIONS AS FIRST PREFERRED ORMECHANICAL IF SPACE CONSTRAINTS EXIST. BELOWGRADE CONNECTIONS MAY BE COMPRESSION OR CADWELD.2. NO EXTERNAL GROUND BARS.3. ALL GROUND LEADS TO BE ROUTED DOWNWARDS TONEAREST TIE IN POINT TO MAIN HOME RUN GROUND.4. IF POLE TO GROUND ROD IS >6’ ADD 3RD GROUND ROD ATBASE OF POLE.5. BOND METER ENCLOSURE PER UTILITY REQUIREMENTS.BOND NEUTRAL BAR TO GROUNDING ELECTRODES(GROUND RODS) WITH #2 AWG PER NEC ARTICLE 250.PROVIDE MAIN BONDING JUMPER BETWEEN SERVICEDISCONNECT SWITCH /GROUND BAR AND NEUTRAL PERNEC ARTICLE 250 (SEE NOTE 6).6. IF INCOMING POWER SOURCE IS NON-SEPARATELYDERIVED (E.G. FED FROM ANOTHER BUILDING OR ABRANCH CIRCUIT) THEN DISCONNECT / PANELBOARDNEUTRAL BAR SHALL NOT BE BONDED TO GROUND. REFERTO NEC ARTICLE 250 IF APPLICATION IS NOT CLEAR.7. WHEN PRESENT, BOND VERIZON GROUND DOWNCONDUCTOR TO UTILITY POLE GROUND BELOW ANYANCILLARY EQUIPMENT BOND.8. GROUND SYSTEM RESISTANCE 25 OHMS OR LESS.9. ALL EXTERNAL ANTENNA AND EQUIPMENT SHALL BEBONDED DOWNWARD TO HOME RUN GROUND WIRE.10. ALL INTERNAL ANTENNA AND EQUIPMENT SHALL BEBONDED TO INSIDE CABINET OR SHROUD GROUND POINT.11. GROUND SYSTEM INSPECTION/TEST WELLS NOTREQUIRED BY VERIZON.12. IF NON VZ OWNED POLE MAY MODIFY GROUNDING PERPOLE OWNER OR AHJ REQUIREMENTSPROPOSED RADIO EQUIPMENT ORRADIO/EQUIPMENT ENCLOSURE.SEE NOTES 9 & 10.SEE NOTE 1.PROPOSED #2 AWG SOLID TINNED COPPER HOME RUNFROM ANTENNA TO GROUND ROD VIA MECHANICALCONNECTION OR CRIMP. #2 AWG FOR INTERIOR POLESMAY BE SOLID OR STRANDED. BOTTOM 10' MINIMUM OFEXTERNAL GROUND TO BE IN RISER OR CONDUITPROPOSED ANTENNASMALL CELL POLESEE NOTES 5 & 6.PROPOSED NEMA 3R ENCLOSURE W/SERVICE RATED BREAKER ANDNEUTRAL BARPROPOSED ELECTRICALMETER (IF APPLICABLE)METER/PANEL GROUNDINGDETAIL (SIDE VIEW)NTSMOUNTING DIRECTION NOTES:1. RADIO EQUIPMENT ENCLOSURE, POWER METER AND NEMAENCLOSURE WITH PANEL AND DISCONNECT TO BE MOUNTEDPARALLEL TO THE STREET, AWAY FROM ONCOMING TRAFFIC.2. TYPICAL GROUNDING DETAIL SHOWN, APPLY FOR ALL POLE TYPES.
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-4DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23GROUNDINGDETAILSCONDUCTOR CABLE CONNECTOR ISOMETRIC6NTSTRENCH DETAILS4NTSWELD CONNECTION DETAILHAND HOLE DETAILS1NTS3NTSANTENNA GROUNDING DIAGRAM2NTSTYPICAL GROUND BAR DETAIL5NTSNOTE:CONTRACTOR TO APPLYCOPPERSHIELD OR NO-OX3/8"x3/4" SS BOLT1/4"x4"x12" OR1/4"x4"x20" BUS BARSITE PRO 1PART #'SMG41236 (TYP.)MG42051 (MGB)3/8" LOCK WASHERINSULATOR PART # INS38-KOR APPROVED EQUIVALENT38" GALV. SCREWS2" AWG TINNED WIRELEAD W/ THERMOWELDMOUNTINGBRACKET PART#MT200 ORAPPROVEDEQUIVALENT3/8"x3/4" SS BOLTSS ANGLE ADAPTORPART# MG-ADAP-K ORAPPROVED EQUIVALENT(TOWER MOUNTING KIT)CONDUCTOR CABLECONNECTOR HARGERPART# 212T (OR EQUAL)EXTERIOR GROUND RING. #2SOLID BARE TINNED COPPERGROUNDING CONDUCTORNO SLAG ORDEFORMITIES ALLOWEDEXOTHERMIC WELD(THERMOWELD OREQUIVALENT) PARALLEL,NO T-WELD ALLOWED.MINIMUM TURNINGRADIUS 45 DEGREES(TYPICAL)JUMPER. #2 SOLID BARETINNED COPPERGROUNDING CONDUCTORFINISHED GRADECOMPACTED BACKFILL TO95% OF PROCTOR DENSITYWARNING TAPEPVC CONDUITS18" TRENCH OR AS REQUIRED BYPOWER/ TELEPHONE COMPANY1'-0"24" (MIN.) OR ASREQUIRED BY POWER/TELEPHONE COMPANY
PROPOSED ANTENNA(1) #6 AWG JACKETEDGROUND IN CONDUITGRADEGROUNDCABLECOPPERCLAD STEELGROUND ROD 5/8" x10' (TYP.)3" COMPACTEDSAND FILL1" X 4" SLOT IN PVC PIPE ATGROUND CABLE LOCATIONEXOTHERMICCONNECTION (TYP.)TEST LOOPFINISH GRADENOTE:1. CONTRACTOR SHALL PROVIDE PRE-CASTCONCRETE INSPECTION WELL WITH CASTIRON TRAFFIC RATED LID WHEN WELL WILLBE IN AN AREA WHERE CAN BE DAMAGED.2. ALL WORK SHALL CONFORM TO THE LOCALBUILDING CODES. DEPTH MAY VARY
OHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHOHUG/E UG/E UG/E UG/E UG/E UG/E UG/E UG/E UG/E UG/E UG/E
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-5DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23ELECTRICAL ROUTING PLAN10' 20'11x17 SCALE: 1"=20'GRAPHIC SCALE(SCALE IN FEET)0'ELECTRICALROUTING PLANUTILITY LINE LEGENDRCWRCWUG/EUG/EGASGASSSSSUGFUGFWTRWTREXISTING UNDERGROUND FIBEREXISTING UNDERGROUND ELECTRICEXISTING UNDERGROUND GASEXISTING UNDERGROUND SANITARY SEWEREXISTING UNDERGROUND STORM SEWEREXISTING UNDERGROUND WATER EXISTING UNDERGROUND RECLAIMED WATER EXISTING OVERHEAD UTILITY WIRESEXISTING ROW/ PROPERTY LINEPROPOSED OVERHEAD ELECTRICOHOHOHOHSTSTNEW SERVICE ENTRANCE CONDUCTORSSIZED PER NEC 230.202(A) ACCORDING TOSERVICE ENTRANCE CONDUCTOR ANDCONDUIT TABLE - TOTAL DISTANCE 145'PROPOSEDBORE PITPROPOSED NODE LOCATIONNEW UTILITY METER AND SERVICEDISCONNECT MOUNTED ON NEW POLEPROPOSED DIRECTIONAL BORING OF 111'(45" MIN VERTICAL COVER BELOW GRADE)PROPOSEDBORE PITCONNECT TO NEWJEA HANDHOLEROYAL PALMS DRIVE
60' RIGHT-OF-WAY - PER DEEDS
2-LANE ASPHALT ROAD
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-6DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23ELECTRICALDETAILSNOTE:1. PROVIDE PVC CONDUIT BELOW GRADEEXCEPT AS NOTED BELOW.2. PROVIDE RCS CONDUIT AND ELBOWS ATSTUB UP LOCATIONS (I.E. SERVICE POLE,BTS EQUIPMENT, ETC.)3. INSTALL UTILITY PULLBOXES PER NEC.4. SEPARATION DIMENSIONS TO BE VERIFIEDWITH LOCAL UTILITY CO. REQUIREMENTSE-62SCALE : N.T.S.CONDUIT TRENCHING DETAIL (TYP.)FINISHED GRADE, ASPHALT ORCONCRETE PAVING, MATCHSLOPE AND THICKNESS OFEXISTING SURFACERESTORE SURFACE TO MATCHORIGINAL CONDITIONUNDISTURBEDCOMPACTEDBACKFILL (SUITABLEON SITE MATERIAL)6" WARNING TAPEELECTRICAL CONDUIT(S) WHEREAPPLICABLE (REFER TO NOTE 1)LOW VOLTAGE/ FIBER CONDUITWHERE APPLICABLE (REFER TONOTE 1)6" MAXIMUM COMPACTED LAYERS(LIFTS) OF SAND (ROCK BED SHALLBE USED BELOW GROUND WATER)6"4"2'-0" MIN.3'-0" MIN.6" MIN.(TYP.)CUSTOMER'S POINT OF SERVICECONDUITS TOCUSTOMER'S SERVICEP/LSERVICE BOX INSTALLED ANDMAINTAINED BY CUSTOMERR/WSEE NOTESELECTRICALUTILITY POLESCH. 40 PVC CONDUITS WITH CHAMFERED EDGEREQUIRED & 90 ELBOWS. SUPPLIED & INSTALED BYCUSTOMERS ELECTRICIAN.E-64SCALE : N.T.S.PLAN VIEWPREREAMINGPULLBACKPILOT HOLEEXIT POINTDESIGNED DRILLED PATHANNULUSDRILL PIPEDRILLING FLUID RETURNSENTRY POINTHORIZONTAL DRILLING RIGDRILL PIPEDRILL PIPEANNULUSTYPICAL DIRECTION OF PROGRESSDRILLING FLUID RETURNSDRILL PIPEPREFABRICATEDPULL SECTIONANNULUSDIRECTION OF PROGRESSSCALE : N.T.S.DIRECTIONAL BORE DETAILE-6345" MIN.45" MIN.NOTE:DIRECTIONAL BORE DRILL BIT AND BACKREAMER ARE 4.5" DIAMETER. THE BORE SHALLBE A MINIMUM OF 10 TIMES THE DIAMETERBELOW GRADE (45"). VERIFY SIZES AND DEPTHSWITH DIRECTIONAL BORE CONTRACTOR.45" MIN.E-65SCALE : N.T.S.PROFILE VIEWR/WBOX TO SET FLUSH WITH FINISHED GRADE3 FEET MIIMUM OF EXCESSSERVICE ENTRANCE CONDUCTORSIN SERVICE BOXCUSTOMER'S SERVICECONDUIT NOT TO EXCEED 1'BELOW LOCATION OF SERVICE BOX45° ELBOW (36" RADIUS)WARNINGTAPE90° ELBOW (36" RADIUS)12"
30" MIN.
36" MAX.APPROX. 4" ABOVE FINISHED GRADEELECTRICALUTILITY POLECONDUITS TO EXTEND ABOVE GROUND AND BE IN DIRECTCONTACT WITH ELECTRICAL UTILITY POLE. END TO BE PLUGGEDAND TO BE STRAPPED TO POLE 1" BELOW TOP OF CONDUITE-61ELECTRICAL FEEDER SIZING TABLENOTE: VERIFY FINAL CONDUIT/CONDUCTOR WITH VZW CXPM PRIOR TO INSTALLATION.SERVICE ENTRANCE CONDUCTOR AND CONDUITTABLE FOR 100A, 120/240V-1P-3W SERVICE, BASED ONA MAX OF 3% VOLTAGE DROP (15A MAX DEMAND LOAD)MIN. CONDUCTORS MIN. CONDUITDISTANCE (FEET)0 - 500(3) #3 AWG2" PVC SCH 40500 - 650(3) #2 AWG2" PVC SCH 40651 - 800(3) #1 AWG2" PVC SCH 40801 - 925(3) #1/0 AWG2" PVC SCH 40
0'10'20'30'40'50'60'70'80'90'100'110'120'UG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EUG/EPREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONE-7DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.235' 10'11x17 SCALE: 1"=10'GRAPHIC SCALE(SCALE IN FEET)0'NOTES:UTILITIES SHOWN ARE BASED ON FIELD SURVEYED 811 LOCATE MARKINGS, AND AVAILABLEONLINE RESOURCES; UNDERGROUND IMPROVEMENTS WERE NOT FIELD LOCATED. THEREIS NO GUARANTEE THAT ALL UTILITIES AND DEPTHS ARE SHOWN OR IDENTIFIED. THECONTRACTOR SHALL CONTACT SUNSHINE 811 AND SHALL FIELD VERIFY UTILITIES ANDOTHER OBSTRUCTIONS PRIOR TO CONSTRUCTION.ELECTRICAL PROFILEDIRECTIONAL BORING CONTRACTOR REQUIREMENTS:1. DETERMINE ORIENTATION AND TRACKING OF THE DRILL BIT2. UTILIZE RELIEF HOLES AS NECESARY TO RELIEVE EXCESS PRESSURE DOWN HOLE3. PREVENT HEAVING DURING PULL BACK4. KEEP THE DRILL PIPE IN THE BORE HOLE UNTIL THE FINAL PRODUCT IS PULLED INTO PLACE5. WHEN BORING UNDER ROADWAY PAVEMENT, INSTALL THE PRODUCT INTO A BORE HOLEWITHIN THE SAME DAY THAT THE PRE-BORE IS COMPLETEDUNDERGROUND UTILITY NOTES PER UAM:1. MAINTAIN A CLEARANCE, FROM ANY EXISTING VITRIFIED CLAY SANITARY PIPE LINE OR EXISTING GAS LINES, OF AT LEAST 3.5TIMES THE BORED DIAMETER.2. WHEN BORING UNDER ROADWAY PAVEMENT, THE UAO SHALL MAINTAIN A BORE DEPTH EQUAL TO TEN (10) TIMES THE BOREDDIAMETER OR GREATER AS MEASURED FROM THE TOP OF PAVEMENT TO THE TOP OF THE BORE.3. MINIMUM VERTICAL CLEARANCE BELOW THE TOP OF PAVEMENT OR EXISTING UNPAVED GROUND.3.1. 45" BELOW PAVEMENT3.2. 45" BELOW UNPAVED GROUND4. PROVIDE MIN 12" VERTICAL SEPARATION BETWEEN EXISTING AND PROPOSED UTILITIES5. SOFT DIGGING AND VACUUM EXCAVATION TO BE USED IN THE 24" TOLERANCE ZONE TO CONFIRM ELEVATION OF EXISTINGUNDERGROUND FACILITIES PRIOR TO DIRECTIONAL BORING & INSTALLATION OF NEW UNDERGROUND UTILITIESNOTE:NO ELEVATION RECORDS AVAILABLE. CONTRACTOR SHALL VERIFY ALL UTILITY LOCATIONS AND DEPTHS BEFORE BORING.NOTE:UNDERGROUND COMMUNICATION LINES/FIBER INSTALLATION DESIGN UNDER SEPARATE PERMITELECTRICALPROFILEPROPOSEDNODE LOCATIONNEW UTILITY METER AND SERVICEDISCONNECT MOUNTED ON NEW POLE111' ALONG ROYAL PALMS DRIVE0'2'4'6'8'10'12'GRADELEVEL0'2'4'6'8'10'12'GRADELEVELPROPOSEDBORE PITPROPOSEDBORE PITCONNECT TO NEW JEAHANDHOLEDIRECTIONAL BORE CONDUIT (45" MIN COVER). PROVIDEMIN. 12" VERTICAL AND HORIZONTAL SEPARATIONBETWEEN EXISTING AND PROPOSED UTILITIES (TYP.).POWER TO BE ROUTED IN 2'' PVC SCH40 CONDUIT.
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONMOT-1DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23MOT DETAILS
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONMOT-2DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23FDOT MOT INDEX102-600
PREPARED BYPROFESSIONAL SEALISSUED DATESSHEET NAMESHEET NUMBERPREPARED FORPROJECT INFORMATIONMOT-3DISCLAIMER:NO COPIES, REPRODUCTIONS, TRANSMISSIONS OR ELECTRONIC MANIPULATIONOF ANY PORTION OF THESE DRAWINGS IN WHOLE OR IN PART ARE TO BE MADEWITHOUT THE EXPRESS WRITTEN PERMISSION OF CBVR TELECOM DESIGNGROUP. ALL DESIGNS INDICATED IN THESE DRAWINGS ARE PROPERTY OF CBVRTELECOM DESIGN GROUP. ALL COPYRIGHTS RESERVED (C) 2023. THESE PLANSARE FOR BUILDING DEPARTMENT REVIEW ONLY THEY ARE NOT TO BECONSTRUED AS CONSTRUCTION DOCUMENTS UNTIL ALL BUILDING DEPARTMENTAPPROVALS ARE OBTAINED.6505 N HIMES AVETAMPA, FLORIDA 33614(770) 853-1233FL CA # 3101402/10/20237701 E TELECOM PKWYTEMPLE TERRACE, FL 33637715342NEPTUNE BCH_001ROW ON WEST SIDE OF ROYAL PALMDR NORTH OF ATLANTIC BLVDJACKSONVILLE, FL 32233CBVR PROJECT #: VZW.171.22ISSUED FOR PERMIT010.12.22ISSUED FOR PERMIT111.14.22ISSUED FOR PERMIT202.10.23FDOT MOT INDEX102-602