95 S Saratoga Cir PLRS23-0176 COAB Permit Form with ConditionsOWNER:ADDRESS:CITY:STATE:ZIP:
TANNER BRIAN J 95 SARATOGA CIR S ATLANTIC BEACH FL 32233
COMPANY:ADDRESS:CITY:STATE:ZIP:
ADVANCED PLUMBING
TECHNOLOGY DBA: APT 16207 SESO SUITE 402 CLERMONT FL 34711
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
171773 0000 ATLANTIC BEACH VILLA
# 02
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
95 S SARATOGA CIR PLUMBING RESIDENTIAL CIPP PIPELINER RE-PIPE 6
FIXTURES $17525.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
PLUMBING BASE FEE 455-0000-322-1000 0 $55.00
PLUMBING FIXTURES 455-0000-322-1000 0 $0.00
PLUMBING FIXTURES 455-0000-322-1000 7 $49.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 2Issued Date: 10/10/2023
PERMIT NUMBER
PLRS23-0176
ISSUED: 10/10/2023
EXPIRES: 4/7/2024
PLUMBING RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL: $108.00
2 of 2Issued Date: 10/10/2023
PERMIT NUMBER
PLRS23-0176
ISSUED: 10/10/2023
EXPIRES: 4/7/2024
PLUMBING RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
PLRS23-0176
PICOTE SOLUTIONS RESIN FAMILY
Dual Color 100% Solids Epoxy
Fiber Bonded Epoxy Mastic
Technical Data Sheets, Chemical Resistance Information,
ASTM Testing Results, WRc Approval, SDS Sheets, NSF 61.5
Certification
www.picotegroup.com
1
PLRS23-0176
TABLE OF CONTENTS
Picote Dual Color Epoxy Coating
Resin Specs...........................................3
Technical Data Sheet...........................6
NSF Certified Product Listing.............8
WRc Approval....................................10
ASTM Test Results Explained...........13
Chemical Resistance Sheet..............18
SDS Sheet - DC1000E Base..............20
SDS Sheet - DC1000E Catalyst........23
Picote Fiber Bonded Epoxy Mastic
Technical Data Sheet.........................35
ASTM Test Results Explained...........37
SDS Sheet - Part B.............................42
SDS Sheet - Part A.............................47
2
Please contact your reseller or Picote at:
Picote Solutions Inc., 777 W Pinnacle Peak Rd, Ste B-108
Phoenix, AZ 85027 - USA Tel: +1 864 940 0088
PICOTE DUAL COLOR COATING RESIN TECHNICAL SPECS
1.Extend the life span of the original pipe: The resin can be used to prolong the life of an existing pipe. Clean the
pipe well. Apply single (0.5-1mm/coat) or dual coats of the resin. The new slick inner surface will increase the flow
inside the pipe minimizing the risk of blockages.
2.Create a new semi-structural pipe: Apply several coats of the resin forming a seamless new pipe with a 2-4mm wall
thickness depending on the diameter. Estimated 30-50 year design life when using Semi-Structural Design
Specifications based on pipe diameter.
PRODUCT FACTS
This product has been created to renovate drains, sewers, water pipes, electrical conduits, heat and a/c ducts and
more by brush casting a coating. The specially formulated coating resin forms a semi-structural corrosion resistant
barrier inside the original pipe that is a tested, safe and environmentally friendly product.
The new pipe is corrosion resistant, wear-resistant and non-corrosive. Thanks to a high breaking stretch, it also
withstands shocks and bending. The new pipe becomes elastic and antistatic.
USES
BENEFITS FOR CONTRACTORS
Extend the service life of a pipe, stop corrosion, create a new pipe, ”patch” on top of CIPP liner and fortify
connections*. Apply to small areas or all drains in multi-story buildings. The Picote Coating™ System is affordable,
practical and easily fits in tight places. *Ensure that materials are compatible and the surface is properly prepared.
BENEFITS FOR PROPERTY OWNERS
Customers can stay at home or keep business open during drain renovation.
The Greener Alternative: Eliminating the need to destroy existing walls, gardens or sidewalks, the no-dig solution
reduces waste produced at job sites. Interruptions to traffic are also minimized. All materials used are non-toxic.
3
PACKAGE SIZES:
6x 900ml: 2-part cartridge with 6 cartridges in each case
SHELF LIFE:
2 years from packaging when kept in accordance with storage instructions
included in MSDS and Technical Data Sheet.
MIXING RATION: 2:1
2:1 mix ration by volume. No mixing required with prepackaged cartridges
and supplied static mixing tip.
BASE MATERIALS/ PIPE DIAMETER
WORKING METHOD
HARDNESS
TENSILE STRENGTH
ADHESION STRENGTH: METAL
ADHESION STRENGTH: CONCRETE
PORTIONING
POT LIFE
HARDENING
LEVELING
GAS EMISSIONS
DRY CONTENT
TEMPERATURES
GLOSS
THINNER
COVERAGE
SHRINKAGE
HUMIDITY
UV RESISTANCE
FLEXIBILITY
ELECTRICAL CONDUCTIVITY
Size range 1¼’’ through 12’’ (DN32-DN300) pipes
Coating with brush
Adjustable Shore is 65+ (flexibility goes up when hardness goes down)
2970 PSI
803 PSI with static mixing tip
100% concrete breakage when pulled away
Not applicable
Mixed resin about 25 min @ 70ºF/21ºC
Recoat: 3hrs @ 70ºF/21ºC
Restore flow: 4hrs (24hrs for potable water projects)
Final Cure: 24hrs
Can be recoated within 12hrs with no prep, side grinding panels must
be used after 12hrs
Product is self leveling.
No harmful VOCs released during mixing or after hardening (VOC free)
100% solids
Installation: 50ºF/10ºC - 140ºF/60ºC
Storage: Room Temp 60ºF/15.5ºC - 85ºF/29ºC
Finished product: up to 180ºF/82ºC
Most commercial hot water OK up to 180ºF/82ºC
Semi-gloss
Not used
See Picote Resin Calculator
100% Solids - does not shrink
Hydrophobic repels water
Direct sunlight can alter color of coating
6,080 PSI
Electrical insulating material, does not conduct electricity & is antistatic
PICOTE DUAL COLOR COATING RESIN TECHNICAL SPECS
4
For sales information, please contact your reseller or Picote Solutions www.picotegroup.com
PICOTE DUAL COLOR COATING RESIN TECHNICAL SPECS
STATIC PROPERTIES
TESTS DC1000E
MECHANICAL TESTING
CERTIFICATIONS
INDUSTRIAL SAFETY
SAFETY DATA SHEET
3RD PARTY APPROVALS
SHIPPING
TECHNICAL ENQUIRIES
For further technical information, please contact:
Antistatic
NSF/ANSI tested for standard 61-5
ASTM Tested - please see results below:
Tensile Strength ASTM D638-14 2979 psi
Compression Strength ASTM D695-15 9570 psi
Flexural modulus ASTM D790-15e2 430 ksi
Flexural strength ASTM D790-14e2 6080 psi
Adhesive strength ASTM D4541 Substrate failure
Product certified to NSF/ANSI 372 conforms to the requirements for
“Lead Free” plumbing products as defined by California, Vermont,
Maryland and Louisiana.
Standard: NSF/ANSI 61 Section 5 - 2016
Models: DC1000E Color: White
Picote’s 100% Solids Epoxy Resin, DC1000E, is certified for potable water
pipes DN100 (4’’) and above. The final coat must be in White.
Ready-measured product must not be in contact with skin (it adheres)
Delivered with resin
WRc: Picote Brush Coating™ System is WRc approved for all non-potable
& wastewater applications for pipe diameters between DN50-300 (2-12”)
diameter for clay, concrete and cast iron pipes and DN32-300 (1¼-12“)
for copper, steel and PVC pipes
The two part resin is packaged in sealed tubes and ships from USA.
Suggested storage at room temperature and in accordance with the
guidelines in Technical Data Sheet.
Picote Brush Coating™ System
How long will the pipe be out of service?
Dry to touch in 3 hrs with ambient cure. Light wear 4 hours. Final hardness 24 hours.
Full service can be restored 4 hours after last coat has been applied (24hrs for potable).
Type of pipe:
Suitable for cast iron, PVC, concrete, clay, copper, and stainless steel.
Preparation of the coating surface is dependent on the material of the pipe.
Other application:
if used to coat outside during cold weather, use appropriate heat.
The Picote Brush Coating™ System is powered by the Picote Millers
The Mini or Maxi Coating Pump is conveniently set on the top of the Miller. The system is practical
and easy to keep clean. Picote Millers can also be used for drain cleaning and reinstatements on
lateral connections.
5
Ryan Boldan, Global Learning Solutions Director
+1 864 940-0088 / ryan@picotesolutions.com
or
Richard Swan, Director of Client Technical Services
+44 (0) 7827 223237 / richard@picotesolutions.com
GENERAL DESCRIPTION
COLOR
USAGE
CONCRETE
STEEL/DUCTILE IRON
STAINLESS STEEL
Concrete must be jetted and cleaned removing any loose concrete. Must
be free of grease and oil.
Near-White SSPC-SP10/NACE 2. Acceptable methods: sand blast, chain
flail, or sanding side grinding panel. Remove debris.
Nace No. 1/SSPC SP-5 White Metal Blast. Special preparation in addition to
Picote’s cleaning tools may be needed.
ALL SURFACES MUST BE DRY, CLEAN AND FREE FROM OIL, GREASE, DEBRIS AND OTHER CONTAMINANTS!
SOLIDS
VOLATILE ORGANIC COMPOUNDS
COVERAGE
CURE TIME AT
70º F
21º C
RECOAT
NUMBER OF COMPONENTS
100% (no solvents)
None
20 mils per coat
Recoat Water Contact Final Cure
3 hours 4 hours 24 hours
Can be recoated within 12 hours. After 12 hours must be abraided with side
grinding panels
2
11.7 lbs/Gallon (1.2kg/Litre)
60ºF/15.5ºC - 85ºF/29ºC
Unopened: 24 months from date of manufacture when stored according to
recommended conditions. Opened: up to 6 weeks
392ºF (200ºC)
NET WEIGHT
STORAGE TEMP
SHELF LIFE
FLASH POINT
100% SOLIDS EPOXY
Contrasting colors (White & Gray or White & Blue) between coats.
Plural component epoxy used to rehabilitate concrete, PVC, fiberglass,
clay, cast iron and ductile iron pipes. Creating a monolythic semi-structural
repair of decayed and damaged pipelines. Designed exclusively for the
Picote Brush Coating™ System.
SURFACE PREPARATION
TECHNICAL DATA
DESCRIPTION
6
2110001001 PICOTE DUAL COLOR EPOXY
DC1000E TECH DATA SHEET
DESCRIPTON
Minimum 10 mils (0.3mm) 160 ft2/gal (4m2/litre)
80 ft2/gal (2m2/litre)
20 minutes at 70ºF (21ºC)
2 to 1 in prepackaged cartridge
Picote Brush Coating™ System
RATE OF COVERAGE
POT LIFE
MIXING RATIO
APPLICATION EQUIPMENT
Tensile Strength ASTM D638-14 2979 psi
Compression Strength ASTM D695-15 9570 psi
Flexural Modulus Flexural Strength ASTM D790-15e2 ASTM D790-14e2 430 ksi 6080 psi
Adhesive Strength ASTM D4541 substrate failure
2110001001 PICOTE DUAL COLOR EPOXY DC1000E TECH DATA SHEET
APPLICATION
ASTM
WRc APPROVAL
Picote Brush Coating™ System is WRc approved for all non-potable and wastewater applications for pipe diameters
between DN50mm (2”) and DN300mm (12”) diameter for clay, concrete and cast iron pipes and DN32mm (1¼”) and
DN300mm (12“) for copper, steel and PVC pipes.
NSF 61.5 CERTIFICATION
Product certified to NSF/ANSI 372 conforms to the requirements or “Lead Free” plumbing products as defined by
California, Vermont, Maryland and Louisiana.
Standard: NSF/ANSI 61 Section 5 - 2016
Models: DC1000E Color: White
Picote’s 100% Solids Epoxy Resin, DC1000E, is certified for potable water pipes (DN100) 4’’ and above. The final coat
must be in White.
CLEAN UP
Clean brush and pump hose fittings using acetone. Dispose of feed and pump hose.
REFER TO SAFETY DATA SHEET FOR SAFETY AND HEALTH INFORMATION
7
Maximum 20-40 mils (0.5-1mm)
Please contact your reseller or Picote at coating@picotesolutions.com
Picote Solutions Inc., 777 W Pinnacle Peak Rd, Ste B-108
Phoenix, AZ 85027 - USA Tel: +1 864 940 0088
WRc APPROVAL
Certified Product Listing
For:
Drinking Water System Components – Health Effects
Company:
Picote Solutions, Inc.
20810 SE 18th Place
Sammamish, WA 98075, United States
Plant Location:
Sandy, UT, United States
Standards:
NSF/ANSI/CAN 61 - 2020
Certificate:
Issued Date: 03/29/2017
Material/Product:
Coatings
Contact Temperature:
23 ± 2℃
Models:
DC1000E
Page 1/2
Material Characteristics:
Minimum pipe diameter (inches): 4
Maximum pipe surface area/volume ratio (sq in/L): 61
Minimum tank size (gallons): 50
Maximum tank surface area/volume ratio (sq in/L): 16.8
Maximum dry film thickness per coat (mils): 125
Number of coats: 1
Is additional coating required (e.g. top coat, primer, intermediate coat)? (Y/N): No
Total cure time and temperature: 4 days @ 70°F
Shortest cure time between coats or layers: 2 hours
Final cure time: 4 days @ 70°F
Mix ratio: 2:1
Colors: White
Is this paint/coating system intended to be applied to a pipe? (Y/N): Yes
(1) Certified for use on a new pipe? (Y/N): Yes
(2) Certified for use on a pipe intended for immediate return to service? (Y/N): No
Additional comments:
Flushing or preparation instruction prior to use:
a) Flushing Time: General Flush at 15 minutes
b) Temperature of Flush: 23 ± 2 °C
Powered by TCPDF (www.tcpdf.org)
Page 2/2
Product Certificate
This is to certify that the following product has met the requirements detailed below
Picote Brush Coating™ System
Picote Brush Coating™ System as manufactured by Picote Solutions Inc.
Applicable to non-potable and wastewater applications for pipe diameters
32mm (1¼”) to 300mm (12”).
Picote Solutions Ltd
20810 SE 18th Place
Sammamish
WA 98075
USA
This product meets the requirements set out in WRc Assessment
Schedule PT/431/0918-AS.
18th September 2018
31st December 2021
PT/431/0918
10
11
Extended through 12-21Pleasesee newcertificateprecedingthissection
Page 1 of 5
ASTM Testing on Picote’s Epoxy Coating System
TESTED PRODUCT: Picote Dual Color Epoxy
A piece of finished product, with a maximum thickness
of .125-inches, is machined into a dog-bone shape. Each
end of the test specimen is placed in opposite facing clamps
which then attempt to pull it apart.
The PSI that it takes to break the specimen is calculated as
"Tensile Strength at the Break". The "Tensile Elongation
at the Break" is an additional measurement that shows how
much the product stretches during this test.The "Tensile
Modulus" is a measure taken to test rigidity. All of these
measurements make up the “Tensile Strength” test. The
D638-14 test would simulate separating pipe joints and the
effect that would have on the product in question.
TEST 1: ASTM D638-14 “Tensile Strength”
TEST 1 RESULTS: Picote Epoxy Coating Tensile Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Cross Head Speed:
ASTM D638-14
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
Type I tensile bars (2-inch gage length)
0.2-inches per minute
Sample Replicate Width
(inches)
Thickness
(inches)
Tensile
Strength
at Break
(psi)
Tensile
Elongation
at Break
(%)
Tensile
Modulus at
Young’s
(ksi)
P/N Picote Dual Coat 1000E*
0.5117 0.2209 2970 0.62 586
n/a n/a n/a Requirement
*Picote Dual Color Epoxy 2110001001
Force Measurement
Constant Rate
of Motion
Test
Specimen
Thick-
ness 1/8”
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
Fixed
Head
Fixed
Head
picotesolutions.com
TEST 1
Grips for
Holding
Specimen
Firmly
12
Page 2 of 5
ASTM Testing on Picote’s Epoxy Coating System
TESTED PRODUCT: Picote Dual Color Epoxy
A sample of the product at approximately .25-inches is laid
flat and a machine pushes down on the specimen until it be-
gins to compress. The PSI it requires to sheer the sample is
its “Compression Strength”. The amount it swells when
the pressure is applied is also measured.
This test will show how well the product can sustain loads.
Please note: This test does not measure the
Compression Strength of the cylinder that is created by the
product inside the pipe.
TEST 2: D695-15 “Compression Strength”
TEST 2 RESULTS: Picote’s Epoxy Coating Compressive Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Cross Head Speed:
ASTM D695-15
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
Prism (1.0-inch length)
0.05 inches per minute
Sample Replicate Width
(inches)
Thickness
(inches)
Compressive
Strength at
Yield
(PSI)
P/N Picote Dual Coat 1000E*
0.5260 0.2302 9570
Requirement n/a
*Picote Dual Color Epoxy 2110001001
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
picotesolutions.com
TEST 2
13
Page 3 of 5
ASTM Testing on Picote’s Epoxy Coating System
TESTED PRODUCT: Picote Dual Color Epoxy
This test is used to measure the horizontal strength of the
material. Supports are placed under the sample at each
end, and then a piston drives down at the center. The
force to drive down and the amount of deflection are mea-
sured to come up with the specimen’s “Flexural Modu-
lus”.
This test would simulate areas in a coated pipe that are
being subjected to uneven stress.
TEST 3: D790-15e2 ”Flexural Modulus”
TEST 3 RESULTS: Picote’s Epoxy Coating Flexural Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Support Span:
Cross Head Speed:
ASTM D790-15e2, Procedure A
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
3.641 inches
0.090 inches per minute
Sample Replicate Width
(inches)
Depth Flexural
Strength at
Break
(PSI)
Flexural
Modulus
(KSI)
P/N Picote Dual Coat 1000E*
2 0.5117 0.2142 6080 418
Requirement
*Picote Dual Color Epoxy 2110001001
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
picotesolutions.com
TEST 3
14
Page 4 of 5
ASTM Testing on Picote’s Epoxy Coating System
TESTED PRODUCT: Picote Dual Color Epoxy
In this test, a dolly is glued to the epoxy and allowed to cu-
re. The sample is then cored using a hole saw. A device
with a piston is attached that pulls away from the substrate
until it breaks.
This test can look for two different outcomes depending
upon the substrate used. When a brick or concrete substra-
te is used in a real-world application, it is testing whether or
not that substrate breaks before the coating (product) does.
If steel were to be used, however, the coating will always
break before the substrate, so the PSI is also measured at
the time of the break.
The D4541-09 test simulates a pipe (that has been coated
with the product) breaking, failing, or becoming compro-
mised in any way and how well the material would hold up
and stay adhered under those circumstances.
TEST 4: D4541-09 “Coating Pull Off Strength”
TEST 4 RESULTS: Picote’s Epoxy Coating Pull-off Strength Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Instrument:
Cross Head Speed:
ASTM D4541-09
23±5°C, 50±35% R.H.
As sent by client
Coating as sent by client.
Loading fixture glued to coating
Fixed alignment test modified to use a tensile tester
0.2 inches per minute
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
picotesolutions.com
TEST 4
15
Page 5 of 5
TEST 4 RESULTS: Picote’s Epoxy Coating Pull-off Strength Test continued
Sample Replicate Loading
Fixure
Diameter
(inches)
Pull-Off
Strength
(psi)
Failure
Mode
P/N Picote Dual Coat 1000E – Brick Substrate
0.500 >700 1-10% Coating
Failure
P/N Picote Dual Coat 1000E – Metal Substrate
0.500 >803 1-10% Coating
Failure
P/N Picote Dual Coat 1000E – Concrete Substrate
0.500 >798 0.1-1% Coating
Failure
n/a Requirement
*Picote Dual Color Epoxy 2110001001
For more information on ASTM testing of Picote products, please contact:
Ryan Boldan
Global Learning Solutions Director, Picote Solutions
Ryan@picotesolutions.com
+1 (706) 805-5017
picotesolutions.com
16
Acetic Acid (20%) Excellent
Acetone Not Recommended
Acetylene Excellent
Alcohol - Ethyl Excellent (temperature < 120oF, 50oC)
Alcohol - Isopropyl Excellent
Alcohol - Methyl Good (temperature < 72oF, 22oC)
Aluminum Chloride Excellent (temperature < 72oF, 22oC)
Aluminum Fluoride Good (temperature < 72oF, 22oC)
Aluminum Hydroxide Good (temperature < 72oF, 22oC)
Aluminum Sulfate Excellent (temperature < 72oF, 22oC)
Amines Excellent (temperature < 72oF, 22oC)
Ammonia - Liquid Excellent (temperature < 72oF, 22oC)
Ammonia 10% Excellent (temperature < 72oF, 22oC)
Ammonium Carbonate Excellent (temperature < 72oF, 22oC)
Ammonium Chloride Excellent (temperature < 72oF, 22oC)
Ammonium Hydroxide Excellent (temperature < 72oF, 22oC)
Ammonium Nitrate Excellent (temperature < 72oF, 22oC)
Ammonium Phosphate Excellent (temperature < 72oF, 22oC)
Ammonium Sulfate Excellent (temperature < 72oF, 22oC)
Amyl acetate Excellent (temperature < 72oF, 22oC)
Aniline Fair (temperature < 72oF, 22oC)
Barium Carbonate Excellent (temperature < 72oF, 22oC)
Barium Chloride Excellent (temperature < 72oF, 22oC)
Barium Hydroxide Excellent (temperature < 72oF, 22oC)
Barium Sulfate Fair (temperature < 72oF, 22oC)
Barium Sulfide Good (temperature < 72oF, 22oC)
Beer Excellent (temperature < 72oF, 22oC)
Benzol Excellent (temperature < 72oF, 22oC)
Borax Excellent (temperature < 72oF, 22oC)
Boric acid Excellent (temperature < 72oF, 22oC)
Bromine Excellent (100 ppm)
Butadiene gas Excellent (temperature < 72oF, 22oC)
Butane gas Excellent (temperature < 72oF, 22oC)
Butyl acetate Good (temperature < 72oF, 22oC)
Butaric Acid Fair (temperature < 72oF, 22oC)
Calcium Bisulfite Excellent (temperature < 72oF, 22oC)
Calcium Carbonate Excellent (temperature < 72oF, 22oC)
Calcium Chloride Excellent (temperature < 72oF, 22oC)
Calcium Hydroxide Excellent (temperature < 72oF, 22oC)
Calcium Hypochlorite Excellent (temperature < 72oF, 22oC)
Calcium Sulfate Excellent (temperature < 72oF, 22oC)
Carbon dioxide gas Excellent (temperature < 72oF, 22oC)
Carbon Tetrachloride Excellent (temperature < 72oF, 22oC)
Carbonic Acid Good (temperature < 72oF, 22oC)
Citric Acid Excellent (temperature < 72oF, 22oC)
Copper Chloride Excellent
Copper Nitrate Excellent (temperature < 72oF, 22oC)
Dichloroethane Good (temperature < 120oF, 50oC)
Diesel Fuel Excellent (temperature < 72oF, 22oC)
Ethyl acetate Fair (temperature < 72oF, 22oC)
Ethyl chloride Excellent (temperature < 72oF, 22oC)
Ethylene glycol Fair (temperature < 72oF, 22oC)
Fatty Acids Excellent (temperature < 72oF, 22oC)
Ferric Chloride Excellent (temperature < 72oF, 22oC)
Ferric Sulfate Excellent (temperature < 72oF, 22oC)
Ferrous Chloride Excellent (temperature < 72oF, 22oC)
Ferrous Sulfate Excellent (temperature < 72oF, 22oC)
Fluorine gas Note Recommended
Fluosilicic acid Fair
Formaldehyde, 40% Excellent (temperature < 72oF, 22oC)
Formic Acid Fair (temperature < 72oF, 22oC)
Freon Excellent
Gasoline Excellent
Glucose Good
Glycerine Excellent
Heptane Excellent
Hexane Good
Hydraulic Fluid Excellent
Hydrobromic Acid, 100% Not Recommended
Hydrochloric acid, 20% Good (temperature < 72oF, 22oC)
Hydrocyanic Acid Excellent
Hydrofluoric Acid, 75% Good (temperature < 72oF, 22oC)
Hydrogen Peroxide, 10% Fair (temperature < 72oF, 22oC)
Hydrogen Sulfide Excellent
Jet Fuel Excellent
Kerosene Excellent
Lactic Acid Good (temperature < 72oF, 22oC)
Lead acetate Excellent
Magnesium Carbonate Excellent
Magnesium Chloride Excellent
Magnesium Hydroxide Excellent
Magnesium Nitrate Excellent
Magnesium Sulfate Excellent
Maleic Acid Excellent
Mercury Excellent
Methyl Ethyl Ketone Fair (temperature < 72oF, 22oC)
Naphtha Excellent
Naphthalene Excellent
Nickel Chloride Excellent
Nickel Sulfate Excellent
Nitric Acid 5% Good
Oil - Castor Excellent
Oleic acid Excellent
Oxalic Acid Excellent
Phenol Good
Phosphoric Acid Good
Picric Acid Excellent
Potassium Bicarbonate Excellent
Potassium Bromide Excellent
Potassium Carbonate Excellent
Potassium Chloride Excellent
Potassium Dichromate Fair
Potassium Hydroxide Excellent
Potassium Nitrate Excellent
Potassium Sulfate Excellent
Propane, liquid Excellent
CHEMICAL RESISTANCE DC1000E
17
Propane, liquid Excellent
Silver Nitrate Excellent
Soaps/DETERGENT Excellent
Sodium Acetate Excellent
Sodium Bicarbonate Excellent
Sodium Bisulfate Excellent
Sodium Carbonate Fair (temperature < 72oF, 22oC)
Sodium Chlorate Excellent
Sodium Chloride Excellent
Sodium Cyanide Excellent
Sodium Fluoride Excellent
Sodium Hydroxide, 10% Excellent
Sodium Hydroxide, 50% Good (temperature < 120oF, 50oC)
Sodium Hypochlorite, 100% Not Recommended
Sodium Nitrate Excellent
Sodium Silicate Excellent
Sodium Sulfate Excellent
Sodium Sulfite Excellent
Sodium Thiosulfate Excellent
Stannic Chloride Excellent
Stearic Acid Good
Sulfuric Acid, 20% Excellent
Sulfuric Acid, 75-100% Fair (temperature < 72oF, 22oC)
Sulfur Dioxide Excellent (temperature < 72oF, 22oC)
Tannic Acid Excellent
Tartaric Acid Excellent
Toluene Good (temperature < 72oF, 22oC)
Turpentine Good
Urine Excellent
Vinegar Excellent
Water - Distilled Excellent
Water - Fresh Excellent
Water - Sea, Salt Excellent
Xylene Excellent
Zinc Chloride Excellent
CHEMICAL RESISTANCE DC1000E
18
SECTION 1 IDENTIFICATION
SAFETY DATA SHEET
PICOTE BRUSH COATING™ EPOXY RESIN
DC1000E BASE (COLOR: WHITE, GRAY, OR BLUE)
Revision date: 04-2021
SECTION 2 HAZARD(S) IDENTIFICATION
1.1. Product identifier
Picote Brush Coating™ Epoxy Resin: DC1000E Base (Color: White, Gray, or Blue)
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
@0102.B010286
1.3. Details of the supplier of the safety data sheet
Company name:
Street:
Place:
Telephone:
Picote Solutions
20810 SE 18th PL
Sammamish, WA 98075
480-622-8314
ryan@picotesolutions.com
Ryan Boldan
www.picotesolutions.com
e-mail:
Contact person:
Internet:
Emergency telephone:800-535-5053 - INFOTRAC
2.1. Classification of the substance or mixtureRegulation (EC) No. 1272/2008Hazard categories:
Skin corrosion/irritation: Skin Corr. 2
Serious eye damage/eye irritation: Eye Irrit. 2
Respiratory or skin sensitisation: Skin Sens. 1
Hazardous to the aquatic environment: Aquatic Chronic 3Hazard Statements:
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
2.2. Label elementsRegulation (EC) No. 1272/2008Hazard components for labelling
bis-[4-(2,3-epoxipropoxi)phenyl]propane
Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol oxirane, mono[(C12-14-alkyloxy)methyl] derivs.
Signal word: Warning
Hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.Precautionary statements:
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
2.3. Other hazards
No information available.
SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 FIRST AID MEASURES
3.2. MixturesHazardous components
4.1 Description of first aid measures
After inhalation:
Provide fresh air.
After contact with skin:
Wash with plenty of water. Take off contaminated clothing and wash it before reuse.
After contact with eyes:
Rinse immediately carefully and thoroughly with eye-bath or water.
After ingestion:
Rinse mouth immediately and drink plenty of water.
4.2 Most important symptoms and effects, both acute and delayed
No information available.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Full text of H and EUH statements: see section 16.
CAS No EC No Chemical Name GHS Classification Index No REACH No Quantity
1675-54-3 216-823-5 bis-[4-(2,3-epoxipropoxi)phenyl]
propane
Skin Irrit. 2, Eye Irrit. 2, Skin Sens. 1;
H315 H319 H317 603-073-00-2 01-2119456619-26 20 - < 50 %
9003-36-5 500-006-8
Formaldehyde, oligomeric reaction
products with 1-chloro-2,3-
epoxypropane and phenol
Skin Irrit. 2, Skin Sens. 1, Aquatic
Chronic 2; H315 H317 H411 ———01-2119454392-40 5 - < 20 %
68609-97-2 271-846-8 oxirane, mono[(C12-14-alkyloxy)
methyl] derivs.
Skin Irrit. 2, Skin Sens. 1; H315
H317 603-103-00-4 01-2119485289-22 5 - < 20 %
SECTION 5 FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media:
Co-ordinate fire-fighting measures to the fire surroundings.
5.2 Special hazards arising from the substance or mixture
Non-flammable.
5.3 Advice for firefighters
In case of fire: Wear self-contained breathing apparatus.
Additional information
Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water.
SECTION 6 ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protection equipment.
6.2 Environmental precautions
Do not allow to enter into surface water or drains.
SECTION 7 HANDLING AND STORAGE
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
6.3 Methods and material for containment and cleaning up
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the recovered material as
prescribed in the section on waste disposal.
6.4 Reference to other sections
Safe handling: see section 7
Personal protection equipment: see section 8
Disposal: see section 13
7.1 Precautions for safe handling:Advice on safe handling
No special measures are necessary.Advice on protection against fire and explosion No special fire protection measures are necessary.
7.2 Conditions for safe storage, including any incompatibilities:Requirements for storage rooms and vessels
Keep container tightly closed.Hints on joint storage No special measures are necessary.
7.3 Specific end use(s)
@0102.B010286
8.1 Control parameters
8.2 Exposure controls
Protective and hygiene measures
Take off contaminated clothing. Wash hands before breaks and after work. When using do not eat or drink.
Eye/face protection
Wear eye protection/face protection.
Hand protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality
of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of
hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned
above together with the supplier of these gloves.
Skin protection
Wear suitable protective clothing.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Physical state: liquid
Colour: white, grey
Odour: characteristic
pH-Value: not determined
Changes in the physical state
Melting point: not determined
Initial boiling point and boiling range: not determined
Flash point: 130°C
Flammability
Solid: not applicable
Gas: not applicable
Lower explosion limits: not determined
Upper explosion limits: not determined
Auto-ignition temperature
Solid: not applicable
Gas: not applicable
Decomposition temperature: not determined
Oxidizing properties
Not oxidising.
Vapour pressure: not determined
Density (at 20 °C): 1,6 g/cm³
Water solubility: The study does not need to be conducted because the substance is known to be insoluble in water.
Solubility in other solvents
Not determined
Partition coefficient: not determined
Vapour density: not determined
Evaporation rate: not determined
9.2 Other information
Solid content: not determined
SECTION 10 STABILITY AND REACTIVITY
10.1 Reactivity
No hazardous reaction when handled and stored according to provisions.
10.2 Chemical stability
Danger of polymerisation.
10.3 Possibility of hazardous reactions
Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or
heavy metal ions.
10.4 Conditions to avoid
none
10.5 Incompatible materials
Keep away from: Radical former, Peroxides, Reducing agent.
10.6 Hazardous decomposition products
No known hazardous decomposition products.
SECTION 11 TOXICOLOGICAL INFORMATION
11.1 Information on toxicological effectsAcute toxicity
CAS No Chemical Name Exposure Route Dose Species Source Method
9003-36-5
Formaldehyde, oligomeric reaction
products with 1-chloro-2,3-
epoxypropane and phenol
oral:
dermal:
LD50 >2000 mg/kg
LD50 >400 mg/kg
Rat
Rat
SECTION 12 ECOLOGICAL INFORMATION
12.1 Toxicity
The product is not: Ecotoxic.
12.2 Persistence and degradability
The product has not been tested.
12.3 Bioaccumulative potential
The product has not been tested.
12.4 Mobility in soil
The product has not been tested.
SECTION 13 DISPOSAL CONSIDERATIONS
SECTION 14 TRANSPORT INFORMATION
13.1 Waste treatment methodsAdvice on disposal Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dispose of waste according to
applicable legislation.Contaminated packaging Non-contaminated packages may be recycled. Handle contaminated packages in the same way as the substance itself.
Land transport (ADR/RID)
14.1 UN number: UN 3082
14.2 UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. bis-[4-(2,3-epoxipropoxi)phenyl]propane
14.3 Transport hazard class(es): 9
14.4 Packing group: III
Hazard label: 9
Classification code: M6
Special Provisions: 274 335 375 601
Limited quantity: 5 L
Excepted quantity: E1
Transport category: 3
Hazard No: 90
Tunnel restriction code: -
Inland waterways transport (ADN)
14.1 UN number: UN 3082
14.2 UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. bis-[4-(2,3-epoxipropoxi)phenyl]propane
14.3 Transport hazard class(es): 9
14.4 Packing group: III
Hazard label: 9
Classification code: M6
Special Provisions: 274 335 375 601
Limited quantity: 5 L
Excepted quantity: E1
Marine transport (IMDG)
14.1 UN number: UN 3082
14.2 UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. bis-[4-(2,3-epoxipropoxi)phenyl]propane
12.5 Results of PBT and vPvB assessment
The product has not been tested.
12.6 Other adverse effects
No information available.
Further information
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
14.3 Transport hazard class(es): 9
14.4 Packing group: III
Hazard label: 9
Special Provisions: 274, 335, 969
Limited quantity: 5 L
Excepted quantity: E1
EmS: F-A, S-F
Air transport (ICAO-TI/IATA-DGR)
14.1 UN number: UN 3082
14.2 UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. bis-[4-(2,3-epoxipropoxi)phenyl]propane
14.3 Transport hazard class(es): 9
14.4 Packing group: III
Hazard label: 9
Special Provisions: A97 A158 A197
Limited quantity Passenger: 30 kg G
Passenger LQ: Y964
Excepted quantity: E1
IATA-packing instructions - Passenger: 964
IATA-max. quantity - Passenger: 450 L
IATA-packing instructions - Cargo: 964
IATA-max. quantity - Cargo: 450 L
14.6 Special precautions for user
Warning: strongly corrosive.
14.7 Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixtureNational regulatory information:
Water contaminating class (D): 2 - clearly water contaminating
15.2 Chemical safety assessment
Chemical safety assessments for substances in this mixture were not carried out.
Abbreviations and acronyms
ADR: Accord européen sur le transport des marchandises dangereuses par Route
(European Agreement concerning the International Carriage of Dangerous Goods by Road )
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service
LC50: Lethal concentration, 50%
LD50: Lethal dose, 50%
SECTION 15 REGULATORY INFORMATION
SECTION 16 OTHER INFORMATION
Classification for mixtures and used evaluation method according to Regulation (EC) No. 1272/2008 [CLP]
Classification Classification procedure
Skin Irrit. 2; H315 Calculation method
Eye Irrit. 2; H319 Calculation method
Skin Sens. 1; H317 Calculation method
Aquatic Chronic 3; H412 Calculation method
Relevant H and EUH statements (number and full text)
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
Further Information
@N16.P0000001 @N16.P0000002
(The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor’s safety data sheet.)
SECTION 1 IDENTIFICATION
SAFETY DATA SHEET
PICOTE BRUSH COATING™ EPOXY RESIN
DC1000E CATALYST (COLOR: CLEAR)
Revision date: 04-2021
SECTION 2 HAZARD(S) IDENTIFICATION
1.1. Product identifier
Picote Brush Coating™ Epoxy Resin: Picote DC1000E Catalyst (Color: CLEAR)
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
@0102.B010286
1.3. Details of the supplier of the safety data sheet
Picote Solutions
20810 SE 18th PL
Sammamish, WA 98075
480-622-8314
ryan@picotesolutions.com
Ryan Boldan
www.picotesolutions.com
Company name:
Street:
Place:
Telephone:
e-mail:
Contact person:
Internet:
Emergency telephone:800-535-5053 - INFOTRAC
2.1. Classification of the substance or mixtureRegulation (EC) No. 1272/2008Hazard categories:
Skin corrosion/irritation: Skin Corr. 1
Serious eye damage/eye irritation: Eye Dam. 1
Respiratory or skin sensitisation: Skin Sens. 1
Reproductive toxicity: Repr. 2
Hazardous to the aquatic environment: Aquatic Chronic 2Hazard Statements:
Causes severe skin burns and eye damage.
Causes serious eye damage.
May cause an allergic skin reaction.
Suspected of damaging fertility.
Toxic to aquatic life with long lasting effects.
2.2. Label elementsRegulation (EC) No. 1272/2008
Hazard components for labelling
4-tert-butylphenol
m-phenylenebis(methylamine)
Trimethylhexan-1,6-diamin
Reaction products of C18 (unsaturated) fatty acids with tetraethylenediamine
Tetraethylenepentamine
Signal word: Danger
Hazard statements:
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H361f Suspected of damaging fertility.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements:
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P391 Collect spillage.
2.3. Other hazards
No information available.
SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 FIRST AID MEASURES
3.2. MixturesHazardous components
4.1 Description of first aid measures
After inhalation:
Provide fresh air.
After contact with skin:
Wash with plenty of water. Take off contaminated clothing and wash it before reuse.
After contact with eyes:
Rinse immediately carefully and thoroughly with eye-bath or water.
After ingestion:
Rinse mouth immediately and drink plenty of water.
4.2 Most important symptoms and effects, both acute and delayed
No information available.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Full text of H and EUH statements: see section 16.
CAS No EC No Chemical Name GHS Classification Index No REACH No Quantity
1477-55-0 216-032-5 m-phenylenebis(methylamine)
Acute Tox. 4, Acute Tox. 4, Skin
Corr. 1B, Eye Dam. 1, Skin Sens. 1,
Aquatic Chronic 3; H332
H302 H314 H318 H317 H412
EUH071
———01-2119480150-50 5 - < 20 %
98-54-4 202-679-0 4-tert-butylphenol
Repr. 2, Skin Irrit. 2, Eye Dam. 1,
STOT SE 3, Aquatic Chronic 1;
H361f H315 H318 H335 H410
604-090-00-8 01-2119489419-21 5 - < 20 %
25620-58-0 247-134-8 Trimethylhexan-1,6-diamin
Acute Tox. 4, Skin Corr. 1A, Eye
Dam. 1, Skin Sens. 1, Aquatic
Chronic 3; H302 H314 H318
H317 H412
———01-2119560598-25 5 - < 20 %
100-51-6 202-859-9 benzyl alcohol Acute Tox. 4, Acute Tox. 4; H332
H302 603-057-00-5 01-2119492630-38 1 - < 5 %
1226892-45-0 629-725-6
Reaction products of C18
(unsaturated) fatty acids with
tetraethylenediamine
Skin Corr. 1, Skin Sens. 1, Aquatic
Chronic 1; H314 H317 H410 ———01-2119487006-38 1 - < 5 %
90640-66-7 292-587-7 Tetraethylenepentamine
Acute Tox. 4, Acute Tox. 4, Skin
Corr. 1, Skin Sens. 1; H312 H302
H314 H317
———01-2119487290-3 1 - < 5 %
SECTION 5 FIREFIGHTING MEASURES
SECTION 6 ACCIDENTAL RELEASE MEASURES
SECTION 7 HANDLING AND STORAGE
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
5.1 Extinguishing media
Suitable extinguishing media:
Co-ordinate fire-fighting measures to the fire surroundings.
5.2 Special hazards arising from the substance or mixture
Non-flammable.
5.3 Advice for firefighters
In case of fire: Wear self-contained breathing apparatus.
Additional information
Collect contaminated fire extinguishing water separately. Do not allow entering drains or surface water.
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protection equipment.
6.2 Environmental precautions
Do not allow to enter into surface water or drains.
6.3 Methods and material for containment and cleaning up
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Treat the recovered material as
prescribed in the section on waste disposal.
6.4 Reference to other sections
Safe handling: see section 7
Personal protection equipment: see section 8
Disposal: see section 13
7.1 Precautions for safe handling:
Advice on safe handling
No special measures are necessary.
Advice on protection against fire and explosion
No special fire protection measures are necessary.
7.2 Conditions for safe storage, including any incompatibilities:
Requirements for storage rooms and vessels
Keep container tightly closed.
Hints on joint storage
No special measures are necessary.
7.3 Specific end use(s)
@0102.B010286
8.1 Control parameters
8.2 Exposure controls
Protective and hygiene measures Take off contaminated clothing. Wash hands before breaks and after work. When using do not eat or drink.Eye/face protection
Wear eye protection/face protection.
Hand protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality
of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of
hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned
above together with the supplier of these gloves.Skin protection
Wear suitable protective clothing.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
Physical state: liquid
Colour: brown
Odour: Amines
pH-Value: alkaline
Changes in the physical state
Melting point: not determined
Initial boiling point and boiling range: not determined
Flash point: not determined
Flammability
Solid: not applicable
Gas: not applicable
Lower explosion limits: not determined
Upper explosion limits: not determined
Auto-ignition temperature
Solid: not applicable
Gas: not applicable
Decomposition temperature: not determined
Oxidizing properties
Not oxidising.
Vapour pressure: not determined
Density (at 20 °C): 1,3 g/cm³ ISO 1183
Water solubility: The study does not need to be conducted because the substance is known to be insoluble in water.
Solubility in other solvents
Not determined
Partition coefficient: not determined
Vapour density: not determined
Evaporation rate: not determined
9.2 Other information
Solid content: not determined
SECTION 10 STABILITY AND REACTIVITY
10.1 Reactivity
No hazardous reaction when handled and stored according to provisions.
10.2 Chemical stability
The product is stable under storage at normal ambient temperatures.
10.3 Possibility of hazardous reactions
No known hazardous reactions.
10.4 Conditions to avoid
none
10.5 Incompatible materials
No information available.
10.6 Hazardous decomposition products
No known hazardous decomposition products.
SECTION 11 TOXICOLOGICAL INFORMATION
SECTION 12 ECOLOGICAL INFORMATION
11.1 Information on toxicological effectsAcute toxicity
12.1 Toxicity
The product is not: Ecotoxic.
12.2 Persistence and degradability
The product has not been tested.
12.3 Bioaccumulative potential
The product has not been tested.
Partition coefficient n-octanol/water
12.4 Mobility in soil
The product has not been tested.
12.5 Results of PBT and vPvB assessment
The product has not been tested.
12.6 Other adverse effects
No information available.
Further information
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
CAS No Chemical Name Exposure Route Dose Species Source Method
1477-55-0 m-phenylenebis(methylamine)
oral:
dermal:
inhalation vapour:
inhalation aerosol:
LD50 930 mg/kg
LD50 >3100 mg/kg
ATE 11 mg/l
ATE 1,5 mg/l
Rat
Rabbit
——
——
98-54-4 4-tert-butylphenol oral:
dermal:
LD50 2951mg/kg
LD50 2288 mg/kg
Rat
Rabbit
25620-58-0 Trimethylhexan-1,6-diamin oral:
dermal:
LD50 910 mg/kg
Data lacking
Rat
100-51-6 benzyl alcohol
oral:
inhalation vapour:
inhalation aerosol:
LD50 1230 mg/kg
ATE 11 mg/l
ATE 1,5 mg/l
@N11.P0000002 GESTIS
90640-66-7 Tetraethylenepentamine oral:
dermal:
ATE 500 mg/kg
ATE 1100 mg/kg
CAS No Chemical Name Aquatic Toxicity Dose [ h ] [ d ]Species Source Method
98-54-4 4-tert-butylphenol Acute fish toxicity LC50 >1 mg/l 96 h LC50: Oryzias latipes (Ricefish)Manufacturer
Acute algae toxicity ErC50 14 mg/l 72 h EC50:Pseudokirchneriella subcapitata Manufacturer
Acute crustacea toxicity EC50 3,4 mg/l 48 h EC50: Daphnia magna (Big water flea)Manufacturer
Fish toxicity NOEC 0,1 mg/l 128 d NOEC Pimephales promelas (fathead minnow)Manufacturer
Algea toxicity NOEC 0,32 mg/l 72 d NOEC Pseudokirchneriellasubcapitata Manufacturer
Crustacea toxicity NOEC 0,73 mg/l 21 d NOEC Daphnia magna (Big water flea)Manufacturer
CAS No Chemical Name Log Pow
100-51-6 benzyl alcohol 1,05
SECTION 13 DISPOSAL CONSIDERATIONS
SECTION 14 TRANSPORT INFORMATION
13.1 Waste treatment methodsAdvice on disposal Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dispose of waste according to
applicable legislation.Contaminated packaging Non-contaminated packages may be recycled. Handle contaminated packages in the same way as the substance itself.
Land transport (ADR/RID)
14.1 UN number: UN 2735
14.2 UN proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. m-phenylenebis(methylamine)
14.3 Transport hazard class(es): 8
14.4 Packing group: III
Hazard label: 8
Classification code: C7
Special Provisions: 274
Limited quantity: 5 L
Excepted quantity: E1
Transport category: 3
Hazard No: 80
Tunnel restriction code: E
Inland waterways transport (ADN)
14.1 UN number: UN 2735
14.2 UN proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. m-phenylenebis(methylamine)
14.3 Transport hazard class(es): 8
14.4 Packing group: III
Hazard label: 8
Classification code: C7
Special Provisions: 274
Limited quantity: 5 L
Excepted quantity: E1
Marine transport (IMDG)
14.1 UN number: UN 2735
14.2 UN proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. m-phenylenebis(methylamine)
14.3 Transport hazard class(es): 8
14.4 Packing group: III
Hazard label: 8
Special Provisions: 223, 274
Limited quantity: 5 L
Excepted quantity: E1
EmS: F-A, S-B
Air transport (ICAO-TI/IATA-DGR)
14.1 UN number: UN 2735
14.2 UN proper shipping name: AMINES, LIQUID, CORROSIVE, N.O.S. m-phenylenebis(methylamine)
14.3 Transport hazard class(es): 8
14.4 Packing group: III
Hazard label: 8
Special Provisions: A3 A803
Limited quantity Passenger: 1 L
Passenger LQ: Y841
Excepted quantity: E1
IATA-packing instructions - Passenger: 852
IATA-max. quantity - Passenger: 5 L
IATA-packing instructions - Cargo: 856
IATA-max. quantity - Cargo: 60 L
14.6 Special precautions for user
Warning: strongly corrosive.
14.7 Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixtureEU regulatory information:
Restrictions on use (REACH, annex XVII):
Entry 3: benzyl alcohol
2004/42/EC (VOC): 3,5 % (45,5 g/l)National regulatory information:
Water contaminating class (D): 2 - clearly water contaminating
15.2 Chemical safety assessment
Chemical safety assessments for substances in this mixture were not carried out.
Abbreviations and acronyms
ADR: Accord européen sur le transport des marchandises dangereuses par Route
(European Agreement concerning the International Carriage of Dangerous Goods by Road )
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service
LC50: Lethal concentration, 50%
LD50: Lethal dose, 50%
Classification for mixtures and used evaluation method according to Regulation (EC) No. 1272/2008 [CLP]
Classification Classification procedure
Skin Corr. 1; H314 Calculation method
Eye Dam. 1; H318 Calculation method
Skin Sens. 1; H317 Calculation method
Repr. 2; H361f Calculation method
Aquatic Chronic 2; H411 Calculation method
SECTION 15 REGULATORY INFORMATION
SECTION 16 OTHER INFORMATION
Relevant H and EUH statements (number and full text)
H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H361f Suspected of damaging fertility.
H410 Very toxic to aquatic life with long lasting effects.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
EUH071 Corrosive to the respiratory tract.
Further Information
@N16.P0000001 @N16.P0000002
(The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor’s safety data sheet.)
PICOTE FIBER BONDED
MASTIC TECH DATA SHEET
100% SOLIDS TROWELABLE EPOXY
Gloss white
Used to protect new infrastructure and to rehabilitate existing damaged
infrastructure.
GENERAL DESCRIPTION
COLOR
USAGE
CONCRETE/BRICK
STEEL
Substrate surface must be Hydro Blasted at 3000 psi., removing any loose
concrete or other material. Must be free of grease and oil.
Sand blast to a Nace No. 1/SSPC SP-5 White Metal Profile.
ALL SURFACES MUST BE DRY, CLEAN AND FREE FROM OIL, GREASE, DEBRIS AND OTHER CONTAMINANTS!
SOLIDS
VOLATILE ORGANIC COMPOUNDS
COVERAGE
CURE TIME AT
70ºF (21º C)
RECOAT
NUMBER OF COMPONENTS
100% (no solvents)
None
125 to 250 mils per coat (3-6mm)
Recoat Water Contact Final Cure
2 hours 4 hours 24 hours
Must be abraided with the equivalent of 36 grit sand paper after 24 hrs.
2
2110002001
DESCRIPTION
SURFACE PREPARATION
TECHNICAL DATA
PERFORMANCE • Manholes, wet wells, vaults & septic tanks
• Steel substrates
• Floor and wall penetrations/cracks
• Simple spot repair
• Extreme bonding to nearly all substrates
• Fast curing
• Easy workability
• ¼” build capability with no sag
• No mixing means faster application
28
2.5lbs (1/1kg) usable material/cartridge
15lbs (6.9kg) usable material/case (6 cartridges)
70ºF (21ºC)
24 months unopened
n/a
NET WEIGHT
STORAGE TEMP
SHELF LIFE
FLASH POINT
DESCRIPTION
Sqft/gallon
10 minutes at 70ºF (21ºC)
2 to 1 in prepackaged cartridge. Also available in buckets. Use with Picote
Smart Mixer 2.0, a cordless cartridge dispenser. Use only the material that
the job requires, leaving virtually no wasted material.
Directly applied to substrate from static mixing tip. Use trowel or putty
knife to smooth material.
RATE OF COVERAGE
POT LIFE
MIXING RATIO
APPLICATION EQUIPMENT
Tensile Strength ASTM D638-14 4150 psi
Compression Strength ASTM D695-13 9650 psi
Flexural Modulus Flexural Strength ASTM D790-15e2 Procedure A 8950 psi 437 ksi
Coating Pull Off Strength Test ASTM D4541-09 substrate failure
Acetone. REFER TO SAFETY DATA SHEET FOR SAFETY AND HEALTH INFORMATION.
ASTM
CLEAN UP
ENVIRONMENTALLY SAFE: No harmful VOC’s or odors. Disposable packaging and minimal waste.
Please Contact your reseller or Picote at coating@picotesolutions.com
Picote Solutions Inc., 777 W Pinnacle Peak Rd, Ste B-108
Phoenix, AZ 85027 - USA Tel: +1 864 940 0088
2110002001 PICOTE FIBER BONDED MASTIC TECH DATA SHEET
29
250mils (6mm) 6.4 ft2 (.6 m2) Gallon 125mils (3mm) Gallon (1.2m2)
Sqft/case 250mils (6mm) 9.12 ft2 (.8 m2) Case 125mils (3mm) Gallon (1.7m2)
Page 1 of 5
ASTM Testing on Fiber Bonded Epoxy Mastic
TESTED PRODUCT: Picote Fiber Bonded Mastic
A piece of finished product, with a maximum thickness
of .125-inches, is machined into a dog-bone shape. Each
end of the test specimen is placed in opposite facing clamps
which then attempt to pull it apart.
The PSI that it takes to break the specimen is calculated as
"Tensile Strength at the Break". The "Tensile Elongation
at the Break" is an additional measurement that shows how
much the product stretches during this test.The "Tensile
Modulus" is a measure taken to test rigidity. All of these
measurements make up the “Tensile Strength” test. The
D638-14 test would simulate separating pipe joints and the
effect that would have on the product in question.
TEST 1: ASTM D638-14 “Tensile Strength”
TEST 1 RESULTS: Picote Fiber Bonded Mastic Tensile Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Cross Head Speed:
ASTM D638-14
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
Type I tensile bars (2-inch gage length)
0.2-inches per minute
Sample Replicate Width
(inches)
Thickness
(inches)
Tensile
Strength
at Break
(psi)
Tensile
Elongation
at Break
(%)
Tensile
Modulus at
Young’s
(ksi)
P/N Picote Fiber Bonded Mastic
0.5090 0.3062 4000 0.66 644
n/a n/a n/a Requirement
Force Measurement
Constant Rate
of Motion
Test
Specimen
Thickness 1/8”
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
Fixed
Head
Fixed
Head
TEST 1
Grips for
Holding
Specimen
Firmly
30
Page 2 of 5
ASTM Testing on Fiber Bonded Epoxy Mastic
TESTED PRODUCT: Picote Fiber Bonded Mastic
A sample of the product at approximately .25-inches is laid
flat and a machine pushes down on the specimen until it be-
gins to compress. The PSI it requires to sheer the sample is
its “Compression Strength”. The amount it swells when
the pressure is applied is also measured.
This test will show how well the product can sustain loads.
Please note: This test does not measure the
Compression Strength of the cylinder that is created by the
product inside the pipe.
TEST 2: D695-15 “Compression Strength”
TEST 2 RESULTS: Picote Fiber Bonded Mastic Compressive Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Cross Head Speed:
ASTM D695-15
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
Prism (1.0-inch length)
0.05 inches per minute
Sample Replicate Width
(inches)
Thickness
(inches)
Compressive
Strength at
Yield
(PSI)
P/N Picote Fiber Bonded Mastic
0.5142 0.3068 9650
Requirement n/a
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
TEST 2
31
Page 3 of 5
ASTM Testing on Fiber Bonded Epoxy Mastic
TESTED PRODUCT: Picote Fiber Bonded Mastic
This test is used to measure the horizontal strength of the
material. Supports are placed under the sample at each
end, and then a piston drives down at the center. The
force to drive down and the amount of deflection are mea-
sured to come up with the specimen’s “Flexural Modu-
lus”.
This test would simulate areas in a coated pipe that are
being subjected to uneven stress.
TEST 3: D 790-15e2 ”Flexural Modulus”
TEST 3 RESULTS: Picote Fiber Bonded Mastic Flexural Test
Test Method:
Test Conditions:
Conditioning:
Preparation:
Support Span:
Cross Head Speed:
ASTM D790-15e2, Procedure A
23±2°C, 50±10% R.H.
40+ hours, 23±2°C, 50±10% R.H.
Machined from sample sent by client
5.184 inches
0.150 inches per minute
Sample Replicate Width
(inches)
Depth Flexural
Strength at
Break
(PSI)
Flexural
Modulus
(KSI)
P/N Picote Fiber Bonded Mastic
2 0.5172 0.2860 7050 437
Requirement n/a n/a
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
TEST 3
32
Page 4 of 5
ASTM Testing on Fiber Bonded Epoxy Mastic
TESTED PRODUCT: Picote Fiber Bonded Mastic
In this test, a dolly is glued to the epoxy and allowed to
cure. The sample is then cored using a hole saw. A device
with a piston is attached that pulls away from the substrate
until it breaks.
This test can look for two different outcomes depending
upon the substrate used. When a brick or concrete substra-
te is used in a real-world application, it is testing whether or
not that substrate breaks before the coating (product) does.
If steel were to be used, however, the coating will always
break before the substrate, so the PSI is also measured at
the time of the break.
The D4541-09 test simulates a pipe (that has been coated
with the product) breaking, failing, or becoming compro-
mised in any way and how well the material would hold up
and stay adhered under those circumstances.
TEST 4: D4541-09 “Coating Pull Off Strength”
TEST 4 RESULTS: Picote Fiber Bonded Mastic Pull-off Strength Test
ASTM D4541-09
23±5°C, 50±35% R.H.
As sent by client
Coating as sent by client.
Loading fixture glued to coating
Fixed alignment test modified to use a tensile tester
0.2 inches per minute
A total of four tests were performed including:
1. Tensile Strength 2. Compression Strength 3. Flexural Modulus 4. Coating Pull Off Strength.
Test Method:
Test Conditions:
Conditioning:
Preparation:
Specimen:
Instrument:
Cross Head Speed:
TEST 4
33
Page 5 of 5
TEST 4 RESULTS: Picote Fiber Bonded Mastic Pull-off Strength Test continued
Sample Replicate Loading
Fixure
Diameter
(inches)
Pull-Off
Strength
(psi)
Failure
Mode
P/N Picote Fiber Bonded Mastic – Brick Substrate
0.500 >502 Substrate
P/N Picote Fiber Bonded Mastic – Metal Substrate
0.500 >5 Coating
P/N Picote Fiber Bonded Mastic – Concrete Substrate
0.500 >384 .Substrate
n/a Requirement
For more information on ASTM testing of Picote products, please contact:
Ryan Boldan
Global Learning Solutions Director, Picote Solutions
Ryan@picotesolutions.com
+1 (480) 622-8314
www.picotegroup.com
34
SECTION 1 . INDENTIFICATION
Product Name: FIBER BONDED EPOXY MASTIC PART B Product Code: PICOTE MASTIC CATALYST
PICOTE SOLUTIONS
20810 SE 18TH PL
SAMMAMISH, WA 98075
PHONE 800-535-5053
EMERGENCY: INFOTRAC
SECTION 2. HAZARD(S) IDENTIFICATION
GHS Ratings:
Oral Toxicity Acute Tox. 2 Oral>5+<=50mg/kg
Skin corrosive 2 Reversible adverse effects in dermal tissue, Draize score:
>= 2.3 < 4.0 or persistent inflammation
Eye corrosive 1 Serious eye damage: Irreversible damage 21 days after
exposure, Draize score: Corneal opacity >= 3, Iritis > 1.5
Skin sensitizer 1 Skin sensitizer
Reproductive toxin 2 Human or animal evidence possibly with other information
GHS Hazards
H300 Fatal if swallowed
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H361 Suspected of damaging fertility or the unborn child
GHS Precautions
P201 Obtain special instructions before use
P202 Do not handle until all safety precautions have been read and understood
P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P264 Wash … thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P272 Contaminated work clothing should not be allowed out of the workplace
P280 Wear protective gloves/protective clothing/eye protection/face protection
P281 Use personal protective equipment as required
P310 Immediately call a POISON CENTER or doctor/physician
P321 Specific treatment (see … on this label)
P330 Rinse mouth
P362 Take off contaminated clothing and wash before reuse
P363 Wash contaminated clothing before reuse
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
P302+P352 IF ON SKIN: Wash with soap and water
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact
lenses if present and easy to do – continue rinsing
P308+P313 IF exposed or concerned: Get medical advice/attention
P332+P313 If skin irritation occurs: Get medical advice/attention
P333+P313 If skin irritation or a rash occurs: Get medical advice/attention
P405 Store locked up
P501 Dispose of contents/container to …
Signal Word: Danger
SDS for: PICOTE MASTIC CATALYST Page 1 of 535
Avoid breathing vapors
Oral: N.D.A.
Dermal: N.D.A.
Inhalation: N.D.A.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS number Weight Concentration %
Paratertiarybutylphenol 98-54-4 30.00% - 40.00%
Amine 1477-55-0 20.00% - 30.00%
1,5-Pentanediamine, 2 methyl 15520-10-2 20.00% - 30.00%
Silica 67762-90-7 10.00% - 20.00%
nonyl phenol 84852-15-3 1.00% - 5.00%
SECTION 4. FIRST AID MEASURES
If inhaled remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent
symptons
Rinse immediately with plenty of water for at least 15 minutes. Ensure adequate flushing of the eyes by separating
the eyelids with fingers. Remove contacts if present and easy to do. Continue Rinsing. Get medical attention, if
irritation or symptoms of overexposure persists.
Immediately wash skin with soap and plenty of water.
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person
SECTION 5. FIRE FIGHTING MEASURES
Flash Point: 134 C (273 F)
LEL: UEL:
Not applicable
Foam, Carbon dioxide (CO2) or dry chemical or water spray (water stream may be ineffective).
No information available
Not available
Firefighters, and others exposed, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Stop leak. Dike or contain spill. Pump into slavage tanks and/or absorb with suitable material. Use sparkless shovel
to remove material. Evacuate area and keep unnecessary and unprotected personnel from entering the spill area.
Use appropriate containment and clean up immediately.
Corrosive. Avoid personal contact adn breathing vapor or mist. Stop leak, Dike and contain spill.Prevent spilled
material from entering the ground, water and/or air by using appropriate containment methods.
SECTION 7. HANDLING and STORAGE
Avoid breathing vapor. Avoid contact with eyes, skin and clothing. Keep away from heat and flame. Keep container
closed. Use with adequate ventilation. Wash thoroughly after handling.
Avoid exposure to heat, light, and air for prolonged periods of time. Store in a cool, dry well ventilated area away
from sources of heat and incompatable materials. Eliminate all ignition materials and incompatible materials. Collect
SDS for: PICOTE MASTIC CATALYST
Page 2 of 536
spill with non spark tools.
No information available.
SECTION 8.EXPOSURE CONTROLS, PERSONAL PROTECTION
Other Exposure LimitsACGIH Exposure LimitsOSHA Exposure LimitsChemical Name / CAS No.
Paratertiarybutylphenol
98-54-4
Not EstablishedNot Established Not Established
Amine
1477-55-0
0.1 mg/m3 CeilingNot Established NIOSH: 0.1 mg/m3
Ceiling
1,5-Pentanediamine, 2
methyl
15520-10-2
Not EstablishedNot Established Not Established
Silica
67762-90-7
Not EstablishedNot Established Not Established
nonyl phenol
84852-15-3
Not EstablishedNot Established Not Established
Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control
airborne levels below recommended exposure limits. Good general ventilation should be sufficiant to control airborne levels. Where
such systems are not effective wear suitable personal protective equipment, which preforms satisfactory and meets OSHA or other
recgonized standards. Consult with local procedures for selection, training, and maintenance of the personal protective equipment
Always use adaquate ventilation that comply with local regulations.
Eye/face Protection: Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, OSHA eye and face
rotection reulation, or the Europena standard EN 166
Skin Protection: Chemical-resistant gloves and chemical goggles, face-shield and synthetic apron or coveralls should be used to
prevent contact with eyes, skin or clothing.
Respiratory Protection: A NIOSH air purifying respirator with an organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is
limited. Use a positive presure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known
or any other circumstance where air purifyig respirator may not provide adequate protection.
SECTION 9. PHYSICAL and CHEMICAL PROPERTIES
247 °CBoiling Point 0.970Specific Gravity (SG)
0.00Lbs VOC/Gallon Less Water 0.00Lbs VOC/Gallon Less
Exempt
SECTION 10. STABILITY and REACTIVITY
Stable, Hazardous polymeraization will not occur. Will react with Epoxy Resins especially at elevated temperatures
STABLE
Epoxy Resins under uncontrolled conditions. Mineral acids. Organic acid, oxidixers, Reacts with metals until reacted with epoxy.
None known
Hazardous polymerization will not occur.
SECTION 11. TOXICOLOGICAL INFORMATION
Mixture Toxicity
Oral Toxicity LD50: 8mg/kg
Dermal Toxicity LD50: 3,216mg/kg
Inhalation Toxicity LC50: 2,901mg/L
Component Toxicity
98-54-4 Paratertiarybutylphenol
SDS for: PICOTE MASTIC CATALYST Page 3 of 537
Oral LD50: 3,250 µL/kg (Rat) Dermal LD50: 2,318 mg/kg (Rabbit)
1477-55-0 Amine
Oral LD50: 660 mg/kg (Rat) Dermal LD50: 2 g/kg (Rabbit) Inhalation LC50: 700 ppm (Rat)
84852-15-3 nonyl phenol
Oral LD50: 1,300 mg/kg (Rat) Dermal LD50: 2,031 mg/kg (Rabbit)
Eyes: Irritant to the eyes. Corrosive to Eyes
Skin: Irritant to the skin. Corrosive to Skin
Inhalation: Irritant to respiratory tract. Prolonged or excessive inhalation may cause respiratory tract irritation.
Sensitization: Skin sensitization in humans.
Eyes Kidneys Liver Skin Respiratory System
Effects of Overexposure
Carcinogen RatingCAS Number Description % Weight
SECTION 12. ECOLOGICAL INFORMATION
No ecotoxicity data was found for the product
Component Ecotoxicity
Paratertiarybutylphenol 96 Hr LC50 Pimephales promelas: 4.71 - 5.62 mg/L [flow-through]; 96 Hr LC50
Cyprinus carpio: 6.9 mg/L [static]
48 Hr EC50 Daphnia magna: 3.9 mg/L; 48 Hr EC50 Daphnia magna: 3.4 - 4.5
mg/L [Static]
72 Hr EC50 Desmodesmus subspicatus: 11.2 mg/L
nonyl phenol 96 Hr LC50 Pimephales promelas: 0.135 mg/L [flow-through]; 96 Hr LC50
Lepomis macrochirus: 0.1351 mg/L [flow-through]
48 Hr EC50 Daphnia magna: 0.14 mg/L
96 Hr EC50 Pseudokirchneriella subcapitata: 0.36 - 0.48 mg/L [static]; 72 Hr
EC50 Pseudokirchneriella subcapitata: 0.16 - 0.72 mg/L [static]; 72 Hr EC50
Desmodesmus subspicatus: 1.3 mg/L
SECTION 13. DISPOSAL INFORMATION
Dispose of in accordance with applicable local/municipal, state/provincial and federal regulations.
SECTION 14. TRANSPORT INFORMATION
UN2735 Amines, Liquid, corrosive, n.o.s. (Benzene-1,3-Dimethanamine,1,5-Pentanediamine, 2-Mthyl).
DOT Hazad Class 8
DOT Packaging Class II
Hazard ClassPacking GroupUN NumberProper Shipping NameAgency
SECTION 15. REGULATORY INFORMATION
OSHA:29 CFR 1910.1200 Haxardous Chemical "Irritant", Sensitizer
TSCA: Ingredients listed
SARA III: Sec311 & 312 Immediate Health Haxard; Sec313 Chemicals above de minimus level: None
CA PROP. 65 NOTICE WARNING:
CANADIAN REGULATORY INFORMATION
WHMIS; Hazard Classification: D2B Skin Sensitizer. Refer to SDS for specific warnings
WHMIS Symbols: Stylized T.
WHMIS Trade Secret Registry Numbers: None
SDS for: PICOTE MASTIC CATALYST Page 4 of 5
38
Hazardous Products Act Informtion: This product SDS contains ingredients which are Controlled and/or on the Ingredient Disclosure List
(HPA sections 13 and 14).
The following chemicals are classified under SARA 313 Toxic Release Invetnory (TRI):
84852-15-3 nonyl phenol 1 to 5 %
All Components ListedRegulationCountry
Toxic Substance Control Act (TSCA)Yes
EU Risk Phrases
Safety Phrase
- None
SECTION 16. ADDITIONAL INFORMATION
Hazardous Material Information System (HMIS)National Fire Protection Association (NFPA)
HMIS & NFPA Hazard Rating
Legend
* = Chronic Health Hazard
0 = INSIGNIFICANT
1 = SLIGHT
2 = MODERATE
3 = HIGH Special
Instability
Flammability
Health
0
0
0 0
0
0
Reviewer Revision Date revised: 2017-01-31
Date Prepared: 1/31/2017
SDS for: PICOTE MASTIC CATALYST Page 5 of 539
SECTION 1 . INDENTIFICATION
Product Name: FIBER BONDED EPOXY MASTIC PART A Product Code: PICOTE MASTIC
PICOTE SOLUTIONS
20810 SE 18TH PL
SAMMAMISH, WA 98075
PHONE 800-535-5053
EMERGENCY: INFOTRAC
SECTION 2. HAZARD(S) IDENTIFICATION
GHS Ratings:
Carcinogen 2 Limited evidence of human or animal carcinogenicity
GHS Hazards
H351 Suspected of causing cancer
GHS Precautions
P201 Obtain special instructions before use
P202 Do not handle until all safety precautions have been read and understood
P281 Use personal protective equipment as required
P308+P313 IF exposed or concerned: Get medical advice/attention
P405 Store locked up
P501 Dispose of contents/container to …
Signal Word: Warning
Avoid breathing vapors
Oral: N.D.A.
Dermal: N.D.A.
Inhalation: N.D.A.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS number Weight Concentration %
Epoxy Resin 25085-99-8 74.70%
Barium Sulfate 7727-43-7 10.00% - 20.00%
Silica 67762-90-7 1.00% - 5.00%
Titanium Dioxide 13463-67-7 1.00% - 5.00%
SECTION 4. FIRST AID MEASURES
If inhaled remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent
symptons
Rinse immediately with plenty of water for at least 15 minutes. Ensure adequate flushing of the eyes by separating
the eyelids with fingers. Remove contacts if present and easy to do. Continue Rinsing. Get medical attention, if
irritation or symptoms of overexposure persists.
Immediately wash skin with soap and plenty of water.
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give
anything by mouth to an unconscious person
SDS for: PICOTE MASTIC Page 1 of 440
SECTION 5. FIRE FIGHTING MEASURES
Flash Point: N/A
LEL: UEL:
Not applicable
Foam, Carbon dioxide (CO2) or dry chemical or water spray (water stream may be ineffective).
No information available
Not available
Firefighters, and others exposed, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Stop leak. Dike or contain spill. Pump into slavage tanks and/or absorb with suitable material. Use sparkless shovel
to remove material. Evacuate area and keep unnecessary and unprotected personnel from entering the spill area.
Use appropriate containment and clean up immediately.
Corrosive. Avoid personal contact adn breathing vapor or mist. Stop leak, Dike and contain spill.Prevent spilled
material from entering the ground, water and/or air by using appropriate containment methods.
SECTION 7. HANDLING and STORAGE
Avoid breathing vapor. Avoid contact with eyes, skin and clothing. Keep away from heat and flame. Keep container
closed. Use with adequate ventilation. Wash thoroughly after handling.
Avoid exposure to heat, light, and air for prolonged periods of time. Store in a cool, dry well ventilated area away
from sources of heat and incompatable materials. Eliminate all ignition materials and incompatible materials. Collect
spill with non spark tools.
No information available.
SECTION 8.EXPOSURE CONTROLS, PERSONAL PROTECTION
Other Exposure LimitsACGIH Exposure LimitsOSHA Exposure LimitsChemical Name / CAS No.
Epoxy Resin
25085-99-8
Not EstablishedNot Established Not Established
Barium Sulfate
7727-43-7
5 mg/m3 TWA (inhalable
fraction, particulate matter
containing no asbestos and
<1% crystalline silica)
15 mg/m3 TWA (total dust);
5 mg/m3 TWA (respirable
fraction)
NIOSH: 10 mg/m3
TWA (total dust); 5
mg/m3 TWA (respirable
dust)
Silica
67762-90-7
Not EstablishedNot Established Not Established
Titanium Dioxide
13463-67-7
10 mg/m3 TWA15 mg/m3 TWA (total dust)Not Established
Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control
airborne levels below recommended exposure limits. Good general ventilation should be sufficiant to control airborne levels. Where
such systems are not effective wear suitable personal protective equipment, which preforms satisfactory and meets OSHA or other
recgonized standards. Consult with local procedures for selection, training, and maintenance of the personal protective equipment
Always use adaquate ventilation that comply with local regulations.
Eye/face Protection: Wear appropriate protective glasses or splash goggles as described by 29 CFR 1910.133, OSHA eye and face
rotection reulation, or the Europena standard EN 166
Skin Protection: Chemical-resistant gloves and chemical goggles, face-shield and synthetic apron or coveralls should be used to
prevent contact with eyes, skin or clothing.
Respiratory Protection: A NIOSH air purifying respirator with an organic vapor cartridge or canister may be permissible under certain
circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is
limited. Use a positive presure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known
or any other circumstance where air purifyig respirator may not provide adequate protection.
SECTION 9. PHYSICAL and CHEMICAL PROPERTIES
SDS for: PICOTE MASTIC Page 2 of 441
2500 to 3000 °CBoiling Range 1.398Specific Gravity (SG)
0.00Lbs VOC/Gallon Less Water 0.00Lbs VOC/Gallon Less
Exempt
SECTION 10. STABILITY and REACTIVITY
Stable, Hazardous polymeraization will not occur. Will react with Epoxy Resins especially at elevated temperatures
STABLE
Epoxy Resins under uncontrolled conditions. Mineral acids. Organic acid, oxidixers, Reacts with metals until reacted with epoxy.
Nitrogen oxides and other toxic and acidic gasses when burned.
None known
Hazardous polymerization will not occur.
SECTION 11. TOXICOLOGICAL INFORMATION
Mixture Toxicity
Component Toxicity
Eyes: Irritant to the eyes. Corrosive to Eyes
Skin: Irritant to the skin. Corrosive to Skin
Inhalation: Irritant to respiratory tract. Prolonged or excessive inhalation may cause respiratory tract irritation.
Sensitization: Skin sensitization in humans.
Eyes Respiratory System
Effects of Overexposure
Carcinogen RatingCAS Number Description % Weight
Titanium Dioxide: NIOSH:
potential occupational carcinogen
IARC: Possible human carcinogen
OSHA: listed
13463-67-7 Titanium Dioxide 1 to 5%
SECTION 12. ECOLOGICAL INFORMATION
No ecotoxicity data was found for the product
Component Ecotoxicity
SECTION 13. DISPOSAL INFORMATION
Dispose of in accordance with applicable local/municipal, state/provincial and federal regulations.
SECTION 14. TRANSPORT INFORMATION
UN2735 Amines, Liquid, corrosive, n.o.s. (Benzene-1,3-Dimethanamine,1,5-Pentanediamine, 2-Mthyl).
DOT Hazad Class 8
DOT Packaging Class II
Hazard ClassPacking GroupUN NumberProper Shipping NameAgency
SDS for: PICOTE MASTIC Page 3 of 442
SECTION 15. REGULATORY INFORMATION
OSHA:29 CFR 1910.1200 Haxardous Chemical "Irritant", Sensitizer
TSCA: Ingredients listed
SARA III: Sec311 & 312 Immediate Health Haxard; Sec313 Chemicals above de minimus level: None
CA PROP. 65 NOTICE WARNING:
CANADIAN REGULATORY INFORMATION
WHMIS; Hazard Classification: D2B Skin Sensitizer. Refer to SDS for specific warnings
WHMIS Symbols: Stylized T.
WHMIS Trade Secret Registry Numbers: None
Hazardous Products Act Informtion: This product SDS contains ingredients which are Controlled and/or on the Ingredient Disclosure List
(HPA sections 13 and 14).
State of California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): WARNING!
This product contains the following chemicals which are listed by the State of California as carcinogenic or a
reproductive toxin:
13463-67-7 Titanium Dioxide 1 to 5 % Carcinogen
All Components ListedRegulationCountry
Toxic Substance Control Act (TSCA)Yes
EU Risk Phrases
Safety Phrase
- None
SECTION 16. ADDITIONAL INFORMATION
Hazardous Material Information System (HMIS)National Fire Protection Association (NFPA)
HMIS & NFPA Hazard Rating
Legend
* = Chronic Health Hazard
0 = INSIGNIFICANT
1 = SLIGHT
2 = MODERATE
3 = HIGH Special
Instability
Flammability
Health
0
0
0 0
0
0
Reviewer Revision Date revised: 2017-01-31
Date Prepared: 1/31/2017
SDS for: PICOTE MASTIC Page 4 of 443