1778 Ocean Grove Dr RES23-0217 COAB Permit Form with ConditionsOWNER:ADDRESS:CITY:STATE:ZIP:
SHEEDY RICHARD C 105 WILLOW POND LN PONTE VEDRA
BEACH FL 32082
COMPANY:ADDRESS:CITY:STATE:ZIP:
ACE DOOR & WINDOW
SERVICE 2220 Corporate Square Blvd JACKSONVILLE FL 32216
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
169620 0010 OCEAN GROVE UNIT 02
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
1778 OCEAN GROVE DR RESIDENTIAL
WINDOWS/DOORS 3 DOORS $9951.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
1 BUILDING IN-PROGRESS INSPECTION REQUIRED INFORMATIONAL
Notes:
IN-PROGRESS INSPECTIONS ARE REQUIRED FOR EXTERIOR SIDING, WINDOW, AND DOOR INSPECTIONS, AND SHOULD BE SCHEDULED FOR THE FIRST
DAY OF WORK.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 2Issued Date: 10/10/2023
PERMIT NUMBER
RES23-0217
ISSUED: 10/10/2023
EXPIRES: 4/7/2024
RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
BUILDING PERMIT 455-0000-322-1000 0 $100.00
BUILDING PLAN CHECK 455-0000-322-1001 0 $50.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.25
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL: $154.25
2 of 2Issued Date: 10/10/2023
PERMIT NUMBER
RES23-0217
ISSUED: 10/10/2023
EXPIRES: 4/7/2024
RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
Final Plumbing
Final Electrical
Final HVAC
CC Final
Final Building*
Swimming Pool Steel
Swimming Pool Safety
Electrical Grounding & Bonding
Swimming Pool Final (Bldg)
Swimming Pool Final (PW)
Formed Columns/ Beams*
Masonry Cell Fill
Structural Steel*
OTHER:
OTHER:
OTHER:
OTHER:
OTHER:
Power Pole
Silt Fence
Piers/ Stem Walls
Underground Plumbing
Underground Electric
Foundation/ Footing
Slab**
Retaining Wall Footing
Driveway
Sewer (Building Dept)
Sewer Tap (Utilities Dept)
Rough Electric*
Rough Plumbing/ Top Out*
Rough Mechanical*
House Wrap
Wall Sheathing
Roof Sheathing
Tie-down Framing Connections
Rough Framing
Roofing In Progress
Window/Door In-Progress
Insulation Ceiling
Insulation Wall
Exterior Lath
Stucco Scratch Coat
Exterior Siding In-Progress
Brick Flashing & Ties
Early Power
Gas Rough
Gas Final*
* When all rough electric, plumbing, mechanical are complete but before any work is
covered up.
* When all gas piping is complete and wallboard is installed but before gas is
attached to any appliance. All outlets must be capped and pipe pressurized at a
minimum of 15 lbs.
* For new living space: When all construction work including electrical, plumbing,
mechanical, exterior finish, grading, required paving and landscaping is complete
and the building is ready for occupancy, but before being occupied
Additional inspections may apply to your project if your project
contains these elements:
INSPECTIONS REQUIRED FOR BUILDING PERMITS
To verify compliance with building codes, inspections of the work authorized are required at various points of the construction.
The following inspections are typically required for residential projects:
Date: Initial: Date: Initial:
_____________________________________________________
Permit Type
____________________________________________________
Permit No.
__________________________________________________________
Job Address
____________________________________________________
Contractor
POST THIS CARD WITH PERMITS AND PERMIT
DOCUMENTATION IN FRONT OF BUILDING
Construction Hours per City Code: 7am—7pm Weekdays; 9am—7pm Weekends
Building Department Public Works/Utilities Fire Department
Phone: 904-247-5826 Phone: 904-247-5834 Phone: 904-630-4789
Fax: 904-247-5845 Fax: 904-247-5843 Fax: 904-630-4203
* When forms and reinforcing steel, anchor bolts, sleeves and inserts, and all
electrical, plumbing and mechanical work is in place, but before concrete is poured.
* When all structural steel members are in place and all connections are complete,
but before such work is covered or concealed.
** FORM BOARD ELEVATION CERTIFICATE MUST BE ON-SITE FOR SLAB INSPECTION
3 DOORS
1778 OCEAN GROVE DR
ACE DOOR & WINDOW SERVICE
RES23-0217
RES23-0217
RES23-0217
RES23-0217
RES23-0217
MANUFACTURER
KNOB: SIGNATURE SERIES
DEADBOLT: SIGNATURE SERIES (980)
KNOB: F SERIES
DEADBOLT: B SERIES
MODEL
APPROVED HARDWARE
KWIKSET
SCHLAGE
A. HANDLE SETS AT ACTIVE PANEL
B. STAINLESS STEEL FLUSH BOLT BAR WITH STRIKE PLATES AT PASSIVE PANEL
C. FLUSH BOLT MECHANISM (DIE CAST, STEEL, POM) AT PASSIVE PANEL
D. STEEL DEADBOLT WITH KEEPER AT ACTIVE PANEL
E. STEEL LATCH WITH KEEPER AT ACTIVE PANEL
F. (3) 4X4 DOOR HINGE AT STILE OF ACTIVE AND PASSIVE PANEL
G. T-ASTRAGAL AT ACTIVE AND PASSIVE PANELS
H. ALUMINUM REINFORCEMENT (A) AT ASTRAGAL
I. ALUMINUM MULLION REINFORCEMENT (B) AT INTEGRAL MULLION
HARDWARE SCHEDULE
MANUFACTURER
KNOB: SIGNATURE SERIES
DEADBOLT: SIGNATURE SERIES (980)
KNOB: F SERIES
DEADBOLT: B SERIES
MODEL
APPROVED HARDWARE
KWIKSET
SCHLAGE
A. HANDLE SETS AT ACTIVE PANEL
B. STAINLESS STEEL FLUSH BOLT BAR WITH STRIKE PLATES AT PASSIVE PANEL
C. FLUSH BOLT MECHANISM (DIE CAST, STEEL, POM) AT PASSIVE PANEL
D. STEEL DEADBOLT WITH KEEPER AT ACTIVE PANEL
E. STEEL LATCH WITH KEEPER AT ACTIVE PANEL
F. (3) 4X4 DOOR HINGE AT STILE OF ACTIVE AND PASSIVE PANEL
G. T-ASTRAGAL AT ACTIVE AND PASSIVE PANELS
H. ALUMINUM REINFORCEMENT (A) AT ASTRAGAL
I. ALUMINUM MULLION REINFORCEMENT (B) AT INTEGRAL MULLION
HARDWARE SCHEDULE
NOA No. 21-0 205.0 4
Expiration Date: April 21, 202 6
Approval Date: March 25, 20 2 1
Page 1
MIAMI -DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) Miami, Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T (786) 315-2590 F (786) 315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
PGT Industries, Inc. 1070 Technology Drive,
North Venice, Fl. 34275 S COPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami-Dade County RER -Product Control Section to
be used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this
product or material tested for quality assurance purp oses. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER re serves the right to revoke this
acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein and has b een designed to comply with the Florida Building Code,
including the High Velocity Hurricane Zone. DESCRIPTION: Series “5470” Vinyl Sliding Glass Door (Reinforced)-N.I.
APPROVAL DOCUMENT: Drawing No. SGD-5470 Rev C, titled “Vinyl Sliding Glass Door NOA (NI)”, sheets
1 through 21 of 21, prepared by manufacturer, dated 10/05/15 and revised on 02/01/21, signed and sealed by
Anthony L. Miller, P.E., bearing the Miami-Dade County Product Control Revision stamp with the Notice of
Acceptance number and expirat ion date by the Miami-Dade County Product Control Section. MISSILE IMPACT RATING: None: Applicable Hurricane Protection devices, complying w/ FBC, required.
Limitations:
1. See table 1 (sheet 7 ) and table 2 (sheet 8) for applicable SGD unit sizes, design pressures, reinforcements types,
glass types, sill riser (see tables B-1 & B-2, sheets 7-8) and anchor layout sheets requirements in 11 thru 16.
2. Rigid White PVC, Tan (Non -white) Rigid PVC and Brown coated (Painted or laminated) white Rigid PVC to be labeled per referenced NOA’s requirements.
3. Egress operable doors must comply with min clear width or height per FBC requirement, as applicable.
4. Pocket walls under separate approval, to be reviewed by Building official. LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and series and
following statement: "Miami-Dade County Product Control Approved", noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and th er e has been no
change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or pro cess. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any
section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be
done in its entirety . INSPECTION: A copy of this en tire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises & renews NOA #20-0429.06 and consists of this page 1, and evidenc e pages E-1, E-2 , E -3, E-4
and E-5, as well as approval document mentioned above.
The submitted documentation was reviewed by Ishaq I. Chanda , P.E .
Ishaq I. Chanda , P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 4
Expiration Date: April 21, 2026
Approval Date: March 25 , 20 2 1
E - 1
PGT Industries , Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
1. Evidence submitted under previous NOA
A. DRAWINGS
1. Manufacturer's die drawings and sections. (Submitted under NOA No. 11-0107.09)
2. Drawing No. SGD-5470, titled “Vinyl Sliding Glass Door NOA (NI )”, sheets 1 through 21 of
21, prepared by manufacturer, dated 10/05/15, with Revision A dated 04/05/17, signed and
sealed by Anthony L. Miller, P.E.
B. TESTS
1. Test report on 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94.
4) Forced Entry Test, per FBC, TAS 202-94
along with marked -up drawings and installation diagram of vinyl sliding glass door, prepared by
Fenestration Testing Lab, Inc., Test Report No. FTL 6637 (samples A -1 thru A-5), dated 11/19/10,
signed and sealed by Jorge A . Causo, P. E. (Submitted under NOA No. 11-0107.09)
2. Additional test report No. FTL 6638 (samples A -1 thru A -22) per TAS 201/203-94, issued by
Fenestration Testing Lab, Inc., dated 11/19/10, signed and sealed by Jorge A. Causo, P. E.
(Submitted under NOA No. 11-0107.04)
3. Additional test report No. FTL 8717, issued by Fenestration Testing Lab, Inc., dated 12/07/15,
revised on 02/15/16 and 02/24/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under NOA No. 15-1210.01)
4. Additional test report No. FTL 8546 issued by Fenestration Testing Lab, Inc., dated 11/06/15,
revised on 01/04/16 and 02/11/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under NOA No. 15-1210.01)
5. Additional test report No. FTL 8547 issued by Fenestration Testing Lab, Inc., dated 12/04/15,
revised on 02/15/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under NOA No. 15-1210.01)
6. Additional test report No. FTL 8548 issued by Fenestration Testing Lab, Inc., dated 12/04/15,
revised on 01/04/16 and 02/11/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under NOA No. 15-1210.01)
7. Additional test report No. FTL 8549 issued by Fenestration Testing Lab, Inc., dated 12/04/15,
revised on 12/04/15 and 02/11/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under NOA No. 15-1210.01)
8. Additional test report No. FTL 8552 issued by Fenestration Testing Lab, Inc., dated 12/04/15,
revised on 02/15/16, signed and sealed by Idalmis Ortega, P. E.
(Submitted under N OA No. 15-1210.01).
C. CALCULATIONS
1. Anchor verification calculations and structural analysis, complying with FBC -2014, prepared by
PGT, dated 12/09/15 and last revised on 02/15/16, signed and sealed by Anthony L. Miller, P.E.
(Submitted under NOA No. 15-1210.02).
2. Glazing complies with ASTME -1300-02, -04 & -09.
Ishaq I. Chanda , P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 4
Expiration Date: April 21, 2026
Approval Date: March 25 , 20 2 1
E - 2
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
D. QUALITY ASSURANCE
1. Miami Dade Department of Regulatory and Economic Resources (RER).
E. MATERIAL CERTIFICATIONS
1. Notice of A cceptance No. 15-0528.14 issued to Vision Extrusion Limited for their “White
Rigid PVC Exterior Extrusions for Windows and Doors”, dated 08/13/15, expiring on
09/30/19.
2. Notice of Acceptance No. 16-0920.08 issued to Vision Extrusion Limited for their “VE 1000
Tan 202 and lighter Shades (Non-White) Rigid PVC Exterior Extrusions for Windows and
Doors”, dated 12/08/16, expiring on 12/29/21.
3. Notice of Acceptance No. 15-0528.15 issued to Vision Extrusion Limited for their “Brown
Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for Windows and
Doors”, dated 08/13/15, expiring on 09/30/19.
4. Notice of Acceptance No. 16-0712.02 issued to ENERGI Fenestration Solutions USA, Inc. for
their “TAN 3040 and Lighter Shades (Non-White) Rigid PVC Exterior Extrusions for
Windows and Doors” dated 09/15/16, expiring on 02/04/21.
5. Notice of Acceptance No. 16-0712.04 issued to ENERGI Fenestration Solutions USA, Inc. for
their “Bronze and Lighter Shades of Cap Coated Rigid PVC Exterior Extrusions for
Windows and Doors” d ated 09/15/16, expiring on 04/16/20.
6. Notice of Acceptance No. 16-0712.03 issued to ENERGI Fenestration Solutions USA, Inc. for
their “White Rigid PVC Exterior Extrusions for Windows and Doors” dated 08/10/17,
expiring on 02/28/18.
7. Test report s No(s). 10-002-792(A), 10-06-M0527, 535753-09, per ASTME-84, ASTMD1929
and ASTMD -635, issued by EXOVA to Vision Extrusion for cellulosic composite material.
(Submitted under NOA No. 11-0107.04)
F. STATEMENTS
1. Statement letter of conformance with FBC-5th Edition (2014) and FBC-6th Edition (2017),
issued by manufacturer, dated 08/14/17, signed & sealed by Lynn Miller, P.E.
2. Statement letter of no financial interest, dated 04/18/17, issued by manufacturer, signed &
sealed by Lynn Miller, P.E.
3. Letter of lab compliance, part of the above test reports.
G. OTHER
1. Notice of Acceptance No. 15-1210.02, issued to PGT Industries, for their Series “5470” Vinyl
Sliding Glass Door (Reinforced) – N.I.”, approved on 03/0316 and expiring on 04/21/21.
2. Evidence Submitted under previous submittal
A. DRAWINGS
1. Drawing No. SGD-5470 Rev B, titled “Vinyl Sliding Glass Door NOA (NI )”, sheets 1 through
21 of 21, prepared by manufacturer, dated 10/05/15 and revised on 04/22/20, signed and sealed
by Anthony L. Miller, P.E.
Ishaq I. Chanda , P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 4
Expiration Date: April 21, 2026
Approval Date: March 25 , 20 2 1
E - 3
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
B. TESTS
1. Te st reports on: 1) Air Infiltration Test, per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resist ance Test, per FBC, TAS 202-94
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked -up drawings and installation diagram of all PGT Industries, Inc. representative
units listed below and tested to qualify Dowsil 791 and Dowsil 983 silicones, prepared by
Fenestration Testing Laboratory, Inc., Test Report s No.:
FTL-7897, PGT PW5520 PVC Fixed Window (unit 6 in proposal), dated 09/03/14
FTL-20-2107.1, PGT SGD780 Aluminum Sliding Glass Door (unit 7 in proposal) FTL-20-2107.2,
PGT CA740 Alum. Outswing Casement Window (unit 8 in proposal) FTL-20-2107.3, PGT
PW7620A Aluminum Fixed Window (unit 9 in proposal) and FTL-20-2107.4, PGT PW7620A
Aluminum Fixed Window (unit 10 in proposal) dated 07/13/20, all signed and sealed by Idalmis
Ortega, P.E.
C. CALCULATIONS
1. Anchor verificatio n calculations and structural analysis, complying with FBC 7th Edition
(2020), dated 04/22/20, prepared by manufacturer, signed and sealed by Anthony Lynn
Miller, P.E.
2. Glazing complies w ith ASTM E1300-04, -09, -12 and -16.
D. QUALITY ASSURANCE
1. Miami-Dad e Department of Regulatory and Economic Resources (RER).
E. MATERIAL CERTIFICATIONS
1. Notice of Acceptance No. 19-0305.02 issued to Kuraray A merica, Inc. for their “Trosif ol®
Ultraclear, Clear, and Colo r PVB Glass Interlayers”, expiring on 07/08/24.
2. N otice of Acceptance No. 17-0808.02 issued to Kuraray America, Inc. for their
“SentryGlas® (Clear and White) Glass Interlayers”, expiring on 07/04/23.
3. Notice of Accept ance No. 18-1106.10 issued to V isio n Extrusions Limited for their “Brown
Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions for Windows and
Doors”, expiring on 09/30/24.
4. Notice of Acceptance No. 18-1106.11 issued to Vision Extrusions Limited for their series
“VE 1000 Tan 202 and lig hter shades (Non–White) Rigid Cellular PVC E xterior
Extrusions f or Windows and Doors”, expiring on 12/29/21.
5. Quanex Part Super Spacer Standard complying with ASTM C518 Thermal Cond uctivity
0.881 BTU -in/ hr.-ft²-°F, ASTM F 1249 WVTR-Pass, ASTM D 3985 Oxygen–Pass, ASTM E
2190 I.G . Durability -No Fog-Pass. (Submitted under previous NOA No. 15-0409.05).
6. Quanex Part Duraseal complying with ASTM C518 Thermal Conduct ivity 2.22 BTU -in/ h r.-
ft²-°F, ASTM F 1249 WVTR-Pass, ASTM D 1434 Argon Permeance-Pass, ASTM E 2189
I.G. Durability -No Fog, ASTM E 546 Dew Point Development -20o F in 48 hrs. (Submitted
under NOA No. 15-0409.05).
Ishaq I. Chanda , P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 4
Expiration Date: April 21, 2026
Approval Date: March 25 , 20 2 1
E - 4
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
E. MATERIAL CERTIFICATIONS (continue)
7. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13, Voluntary Specification
for Rigid Polyvinyl Chloride (PVC) Exterior Prof iles for Vision Extrusions, Ltd.-VEX-1 by
AAMA Fenestration Exterior Prof ile Certification Program. (Submitted under NOA No. 15-
0409.05).
8. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13.
(Submitted under NOA No. 15-0409.05).
9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterio r
Profiles for Vision Extrusions, Ltd.-VEX-1 by AAMA Fenestration Exterior Profile
Cert ification Program.
10. Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA, Inc. f or
their “Tan 3040 & light shade (non-white) White Rig id PVC Exterior Extrusions for
Windows and Doors”, expiring on 02/04/21.
11. Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution, USA , Inc, for
their series “White Rigid PVC Exterior Extrusions for Windows and Doors”, expiring on
02/28/23.
12. N otice of Acceptance No. 20-0203.03 issued to Energi Fenestration Solut ion, USA, Inc. for
their “Bronze & light shade cap coated White Rigid PVC Exterior Extrusions for
Wind ows and Doors”, expiring on 04/16/25.
F. STATEMENTS
1. Statement letter of conf ormance to FBC 7 th Edition (2020), dated 04/22/20, issued by
manufacturer, sign ed and sealed by Anthony Lynn Miller, P.E.
2. Statement le t ter of no financial interest and of independent, issued by manufacturer, dated
04/18/20 , signed and sealed by Anthony Lynn Miller, P.E.
G. OTHERS
1. This NOA revises NOA# 17-0420.07 and updates to FBC2020 (7th Edition), expirin g 04/21/21.
2. RER Test proposals #19-1155 dated 01/10/20 approved by Ishaq I. Chanda, P.E.
Ishaq I. Chanda , P.E.
Product Control Unit Supervisor
NOA No. 2 1-0 205.0 4
Expiration Date: April 21, 2026
Approval Date: March 25 , 20 2 1
E - 5
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
3. New Evidence Submitted
A. DRAWINGS
1. Drawing No. SGD-5470 Rev C, titled “Vinyl Sliding Glass Door NOA (NI )”, sheets 1 through
21 of 21, prepared by manufacturer, dated 10/05/15 and revised on 02/01/21, signed and sealed
by Anthony L. Miller, P.E.
Note: This revision consists replacement of same existing installation screw with flat head.
B. TESTS
1. None.
C. CALCULATIONS
1. None.
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER).
E. MATERIAL CERTIFICATIONS
1. None.
F. STATEMENTS
1. Statement letter of conf ormance to FBC 7th Edition (2020), dated 02/01/21, issued by
manufacturer, sign ed and sealed by Anthony Lynn Miller, P.E.
2. Statement let ter of no financial in terest and of independent, issued by manufacturer, dated
02/01/21, signed and sealed by Anthony Lynn Miller, P.E.
G. OTHERS
1. This NOA revises & renews NOA# 20-0429.06, expiring 04/21/2 6.