2120 Beach Avenue RES24-0047 PERMITOWNER:ADDRESS:CITY:STATE:ZIP:
MCMANUS JOHN H 2120 BEACH AVE ATLANTIC BEACH FL 32233-5933
COMPANY:ADDRESS:CITY:STATE:ZIP:
PWD ORLANDO 4306 SHADER RD STE100 ORLANDO FL 32808
TYPE OF
CONSTRUCTION:
REAL ESTATE
NUMBER:ZONING:BUILDING USE
GROUP:SUBDIVISION:
169510 0010 SECTION LAND
JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK:
2120 BEACH AVE RESIDENTIAL
WINDOWS/DOORS ONE DOOR $6147.00
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
BUILDING PERMIT 455-0000-322-1000 0 $85.00
BUILDING PLAN CHECK 455-0000-322-1001 0 $42.50
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
1 BUILDING IN-PROGRESS INSPECTION REQUIRED INFORMATIONAL
Notes:
IN-PROGRESS INSPECTIONS ARE REQUIRED FOR EXTERIOR SIDING, WINDOW, AND DOOR INSPECTIONS, AND SHOULD BE SCHEDULED FOR THE FIRST
DAY OF WORK.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
1 of 2Issued Date: 3/5/2024
PERMIT NUMBER
RES24-0047
ISSUED: 3/5/2024
EXPIRES: 9/1/2024
RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL: $131.50
2 of 2Issued Date: 3/5/2024
PERMIT NUMBER
RES24-0047
ISSUED: 3/5/2024
EXPIRES: 9/1/2024
RESIDENTIAL PERMIT
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
DESCRIPTION ACCOUNT QTY PAID
PermitTRAK $131.50
RES24-0047 Address: 2120 BEACH AVE APN: 169510 0010 $131.50
BUILDING $85.00
BUILDING PERMIT 455-0000-322-1000 0 $85.00
BUILDING PLAN REVIEW $42.50
BUILDING PLAN CHECK 455-0000-322-1001 0 $42.50
STATE SURCHARGES $4.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL FEES PAID BY RECEIPT: R26392 $131.50
Printed: Tuesday, March 5, 2024 9:52 AM
Date Paid: Tuesday, March 05, 2024
Paid By: PWD ORLANDO
Pay Method: CREDIT CARD 10150580448
1 of 1
Cashier: AG
Cash Register Receipt
City of Atlantic Beach
Receipt Number
R26392
Final Plumbing
Final Electrical
Final HVAC
CC Final
Final Building*
Swimming Pool Steel
Swimming Pool Safety
Electrical Grounding & Bonding
Swimming Pool Final (Bldg)
Swimming Pool Final (PW)
Formed Columns/ Beams*
Masonry Cell Fill
Structural Steel*
OTHER:
OTHER:
OTHER:
OTHER:
OTHER:
Power Pole
Silt Fence
Piers/ Stem Walls
Underground Plumbing
Underground Electric
Foundation/ Footing
Slab**
Retaining Wall Footing
Driveway
Sewer (Building Dept)
Sewer Tap (Utilities Dept)
Rough Electric*
Rough Plumbing/ Top Out*
Rough Mechanical*
House Wrap
Wall Sheathing
Roof Sheathing
Tie-down Framing Connections
Rough Framing
Roofing In Progress
Window/Door In-Progress
Insulation Ceiling
Insulation Wall
Exterior Lath
Stucco Scratch Coat
Exterior Siding In-Progress
Brick Flashing & Ties
Early Power
Gas Rough
Gas Final*
* When all rough electric, plumbing, mechanical are complete but before any work is
covered up.
* When all gas piping is complete and wallboard is installed but before gas is
attached to any appliance. All outlets must be capped and pipe pressurized at a
minimum of 15 lbs.
* For new living space: When all construction work including electrical, plumbing,
mechanical, exterior finish, grading, required paving and landscaping is complete
and the building is ready for occupancy, but before being occupied
Additional inspections may apply to your project if your project
contains these elements:
INSPECTIONS REQUIRED FOR BUILDING PERMITS
To verify compliance with building codes, inspections of the work authorized are required at various points of the construction.
The following inspections are typically required for residential projects:
Date: Initial: Date: Initial:
____________________________________________________
Permit No.
___________________________________________________________
Job Address
____________________________________________________
Contractor
POST THIS CARD WITH PERMITS AND PERMIT
DOCUMENTATION IN FRONT OF BUILDING
Construction Hours per City Code: 7am—7pm Weekdays; 9am—7pm Weekends
Building Department Public Works/Utilities Fire Department
Phone: 904-247-5826 Phone: 904-247-5834 Phone: 904-630-4789
Fax: 904-247-5845 Fax: 904-247-5843 Fax: 904-630-4203
* When forms and reinforcing steel, anchor bolts, sleeves and inserts, and all
electrical, plumbing and mechanical work is in place, but before concrete is poured.
* When all structural steel members are in place and all connections are complete,
but before such work is covered or concealed.
** FORM BOARD ELEVATION CERTIFICATE MUST BE ON-SITE FOR SLAB INSPECTION
_____________________________________________________
Permit Type
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map
Product Approval
USER: Public User
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL #FL31712-R2
Application Type Revision
Code Version 2023
Application Status Approved
*Approved by DBPR. Approvals by DBPR shall be reviewed anPOC and/or the Commission if necessary.
Comments
Archived
Product Manufacturer Pella Corporation
Address/Phone/Email 102 Main St.Pella, IA 50219(641) 621-6096pellaproductapproval@pella.com
Authorized Signature Kyle Puntpuntkj@pella.com
Technical Representative Joseph Hayden
Address/Phone/Email 102 Main StreetPella, IA 50219(641) 621-6096jahayden@pella.com
Quality Assurance Representative Pat Bortscheller
Address/Phone/Email 102 Main StreetPella, IA 50219(641) 621-1000PJBortscheller@pella.com
Category Exterior Doors
Subcategory Swinging Exterior Door Assemblies
Compliance Method Certification Mark or Listing
Certification Agency National Accreditation & Management Institute
Validated By National Accreditation & Management Institute
Referenced Standard and Year (of Standard)Standard Year
ASTM E330 2014
Equivalence of Product StandardsCertified By
Product Approval Method Method 1 Option A
Date Submitted 01/25/2024
Date Validated 01/26/2024
Date Pending FBC Approval
Date Approved 02/03/2024
Summary of Products
FL #Model, Number or Name Description
31712.1 Pella Entry Doors 6'-8" Glazed I/S or O/S Single or Double Door w/ Sidelights, standard latch and deadbolt
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +40/-40 Other: Configurations of glass shall conform to current ASTME1300 and have safety rated glass. Not approved for use wherewater infiltration resistance is required by the door. Unless unitsare installed in a non-habitable area where the unit & the area aredesigned to accept water infiltration, units shall be installed onlyat locations protected by a canopy or overhang where-by theoverhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"x 6'-8" max nominal size.
Certification Agency Certificate FL31712_R2_C_CAC_NI014620.02-R1.pdf FL31712_R2_C_CAC_NI014620.03-R1.pdfQuality Assurance Contract Expiration Date 05/31/2025Installation Instructions FL31712_R2_II_Addendum to NI014620.02 NI01000063669.pdf Verified By: National Accreditation & Management Created by Independent Third Party: Evaluation Reports FL31712_R2_AE_514600-1A.pdf FL31712_R2_AE_514602-1A.pdf Created by Independent Third Party: Yes
31712.2 Pella Entry Doors 6'-8" Glazed I/S or O/S Single or Double Door w/ Sidelights, multi-point lock
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +40/-40 Other: Configurations of glass shall conform to current ASTME1300 and have safety rated glass. Not approved for use wherewater infiltration resistance is required by the door. Unless unitsare installed in a non-habitable area where the unit & the area aredesigned to accept water infiltration, units shall be installed onlyat locations protected by a canopy or overhang where-by theoverhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"x 6'-8" max nominal size.
Certification Agency Certificate FL31712_R2_C_CAC_NI014620.02-R1.pdf FL31712_R2_C_CAC_NI014620.03-R1.pdfQuality Assurance Contract Expiration Date 05/31/2025Installation Instructions FL31712_R2_II_Addendum to NI014620.02 NI01000063674.pdf Verified By: National Accreditation & Management Created by Independent Third Party: Evaluation Reports FL31712_R2_AE_514600-1A.pdf FL31712_R2_AE_514602-1A.pdf Created by Independent Third Party: Yes
31712.3 Pella Entry Doors 6'-8" Flush Glazed I/S or O/S Single or Double DoSidelights, standard latch and deadbolt
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +50/-50 Other: Configurations of glass shall conform to current ASTME1300 and have safety rated glass. Not approved for use wherewater infiltration resistance is required by the door. Unless unitsare installed in a non-habitable area where the unit & the area aredesigned to accept water infiltration, units shall be installed onlyat locations protected by a canopy or overhang where-by theoverhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"x 6'-8" max nominal size.
Certification Agency Certificate FL31712_R2_C_CAC_NI014557.01-R1.pdf FL31712_R2_C_CAC_NI014557-R1.pdfQuality Assurance Contract Expiration Date 05/31/2025Installation Instructions FL31712_R2_II_Addendum to NI014557 NI01455000064059.pdf Verified By: National Accreditation & Management Created by Independent Third Party: Evaluation Reports FL31712_R2_AE_514600-1A.pdf FL31712_R2_AE_514602-1A.pdf Created by Independent Third Party: Yes
31712.4 Pella Entry Doors 6'-8" Flush Glazed I/S or O/S Single or Double DoSidelights, multi-point lock
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +50/-50 Other: Configurations of glass shall conform to current ASTME1300 and have safety rated glass. Not approved for use wherewater infiltration resistance is required by the door. Unless units
Certification Agency Certificate FL31712_R2_C_CAC_NI014557.01-R1.pdf FL31712_R2_C_CAC_NI014557-R1.pdfQuality Assurance Contract Expiration Date 05/31/2025Installation Instructions FL31712_R2_II_Addendum to NI014557 NI01455000064087.pdf
are installed in a non-habitable area where the unit & the area are
designed to accept water infiltration, units shall be installed onlyat locations protected by a canopy or overhang where-by the
overhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"x 6'-8" max nominal size.
Verified By: National Accreditation & Management
Created by Independent Third Party: Evaluation Reports
FL31712_R2_AE_514600-1A.pdf FL31712_R2_AE_514602-1A.pdf
Created by Independent Third Party: Yes
31712.5 Pella Entry Doors 6'-8" Opaque I/S or O/S Single or Double Door w/
Sidelights, standard latch and deadbolt
Limits of Use Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes Impact Resistant: No
Design Pressure: +50/-50 Other: Configurations of glass shall conform to current ASTM
E1300 and have safety rated glass. Not approved for use wherewater infiltration resistance is required by the door. Unless units
are installed in a non-habitable area where the unit & the area aredesigned to accept water infiltration, units shall be installed only
at locations protected by a canopy or overhang where-by theoverhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"
x 6'-8" max nominal size.
Certification Agency Certificate FL31712_R2_C_CAC_NI014620.01-R1.pdf
FL31712_R2_C_CAC_NI014620-R1.pdfQuality Assurance Contract Expiration Date
05/31/2025Installation Instructions
FL31712_R2_II_Addendum to NI014620 NI01462000064135.pdf
Verified By: National Accreditation & Management Created by Independent Third Party:
Evaluation Reports FL31712_R2_AE_514600-1A.pdf
FL31712_R2_AE_514602-1A.pdf Created by Independent Third Party: Yes
31712.6 Pella Entry Doors 6'-8" Opaque I/S or O/S Single or Double Door w/Sidelights, multi-point lock
Limits of Use
Approved for use in HVHZ: No Approved for use outside HVHZ: Yes
Impact Resistant: No Design Pressure: +50/-50
Other: Configurations of glass shall conform to current ASTME1300 and have safety rated glass. Not approved for use where
water infiltration resistance is required by the door. Unless unitsare installed in a non-habitable area where the unit & the area are
designed to accept water infiltration, units shall be installed onlyat locations protected by a canopy or overhang where-by the
overhang (OH) ratio is equal to or more than 1.0 per FBC. 12'-0"x 6'-8" max nominal size.
Certification Agency Certificate
FL31712_R2_C_CAC_NI014620.01-R1.pdf FL31712_R2_C_CAC_NI014620-R1.pdf
Quality Assurance Contract Expiration Date 05/31/2025
Installation Instructions FL31712_R2_II_Addendum to NI014620 NI01462
000064138.pdf Verified By: National Accreditation & Management
Created by Independent Third Party: Evaluation Reports
FL31712_R2_AE_514600-1A.pdf FL31712_R2_AE_514602-1A.pdf
Created by Independent Third Party: Yes
Back Next
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Re
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records req
electronic mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.
Section 455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department wi
if they have one. The emails provided may be used for official communication with the licensee. However email addresses are public record
to supply a personal address, please provide the Department with an email address which can be made available to the public. To determ
licensee under Chapter 455, F.S., please click here .
Product Approval Accepts:
CERTIFICATION NO: NI014620.02-R1
DATE: 01/08/2020
CERTIFICATION PROGRAM: Structural
COMPANY: Pella
CODE: 1735-1
REVISION DATE: 12/16/2020
To verify that the “Notice of Product Certification” is valid, please visit www.NAMICertification.com to assure that the
product is active and currently listed. This certification represents product conformity to the applicable specification and
that certification criteria has been satisfied. Please review and advise NAMI if any corrections are required to this
document.
COMPANY NAME AND ADDRESS PRODUCT DESCRIPTION
Pella Corporation Series “Pella Entry Doors”
102 Main Street Glazed Fiberglass In-Swing Door
Pella, IA 50219 w/Sidelites & Composite Frame
Configuration: OXXO
Glazing: Insulating Glass (Tempered)
Frame: W-3785mm(149") H-2074mm(81.63")
Panel: W-908mm(35.75") H-2006mm(79")
DLO: W-533mm(21") H-1600mm(63")
SPECIFICATION PRODUCT RATING
ASTM E330-02/14 Design Pressure: +40/-40 psf
Product Tested By: American Test Lab, Inc.
Report No: ATLNC 0829.01-16/ATLNC 1013.01-16/W-1977
Expiration Date:May 31, 2025
Administrator’s Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes, VA 23072
Tel: (804) 684-5124
Fax: (804) 684-5122
NOTICE OF PRODUCT CERTIFICATION
COMPONENT QUALITY INFORMATION:REFER TO DOCUMENT PDS688 AND PELLA SUPPLIER QUALITY MANUALFOR APPLICATION AND DEFINITION OF THESE SYMBOLS. [C] INDICATES CRITICAL DIMENSIONS [K] INDICATES KEY DIMENSIONSC42715TOLERANCES UNLESSOTHERWISE NOTED.X = ±.XX = ±.XXX = ±ANGLES = ±UNITS ARE IN INCHESCLASS:ECO:2/18/2020CONFIDENTIAL PROPERTY OF PELLA CORPORATION. DO NOT DUPLICATE OR TRANSMIT WITHOUT THE EXPRESSWRITTEN PERMISSION OF PELLA CORPORATION. DO NOT SCALE. DRAWING BASED ON ASME Y14.5M-1994PELLA CORPORATION102 MAIN STREET, PELLA, IOWA 50219DRAWING NUMBER1 of 4DES-000063669PAGEREV1ENGR.:DRAWN:DATE CREATED:DES-000063669.DFTFILE NAME:DRW - ASSEMBLY - UNITH.ANDERSONJ.HOUSERCERTIFICATION,,,,F-PASS, 6'8" NON-IMPACT, GLAZED PANEL DB LOCKX.XX.XXX.XXXX.X°REVCHGSHTREVISIONSCODWNENGDATE1A2CORRECT MAX FRAME HEIGHT; 81.875 TO 81.625. CORRECT MAX PANEL HEIGHT;79.250 TO 79.000.C45068J.HOUSERJ.MCANINCH12/30/2020Certification No: NI014620.02/NI014620.03Reviewed by: TDWDate Reviewed: 12/30/2020
C42715TOLERANCES UNLESSOTHERWISE NOTED.X = ±.XX = ±.XXX = ±ANGLES = ±UNITS ARE IN INCHESCLASS:ECO:2/18/2020CONFIDENTIAL PROPERTY OF PELLA CORPORATION. DO NOT DUPLICATE OR TRANSMIT WITHOUT THE EXPRESSWRITTEN PERMISSION OF PELLA CORPORATION. DO NOT SCALE. DRAWING BASED ON ASME Y14.5M-1994PELLA CORPORATION102 MAIN STREET, PELLA, IOWA 50219DRAWING NUMBER2 of 4DES-000063669PAGEREV1ENGR.:DRAWN:DATE CREATED:DES-000063669.DFTFILE NAME:DRW - ASSEMBLY - UNITH.ANDERSONJ.HOUSERCERTIFICATION,,,,F-PASS, 6'8" NON-IMPACT, GLAZED PANEL DB LOCKSHEET #321 TYPICAL ELEVATIONS & GENERAL NOTESANCHORING LOCATIONS & DETAILSTABLE OF CONTENTSDESCRIPTION6'-8" DOUBLE DOOR WITH / WITHOUT SIDELITESFIBERGLASS GLAZED DOOR UNITANCHORING LOCATIONS & DETAILSXCONFIGXXOX or XOOXOOXXOMAX WIDTH37.5"74"75"112.5"149"INSWING OUTSWINGDESIGN PRESSURE RATINGEVALUATED FOR USE IN LOCATIONS ADHERING TOTHE FLORIDA BUILDING CODE, EXCLUDING THE HIGHREQUIREMENTS AS DETERMINED BY ASCE 7, MINIMUMDESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES,DOES NOT EXCEED THE DESIGN PRESSURES LISTED.1.GENERAL NOTESWHEN INSTALLED IN THE WIND-BORNE DEBRIS REGION,HURRICANE PROTECTIVE SYSTEM (SHUTTERS) IS REQUIRED.2.VELOCITY HURRICANE ZONE AND WHERE PRESSURE+40.0 / -40.0 +40.0 / -40.0+40.0 / -40.0 +40.0 / -40.0+40.0 / -40.0 +40.0 / -40.0+40.0 / -40.0 +40.0 / -40.0+40.0 / -40.0 +40.0 / -40.0DOUBLE DOOR UNIT W/SIDELITES37.5" MAX.FRAME WIDTHMAX. FRAME HEIGHT 81.625"149" MAX. OVERALL FRAME WIDTH36.375" MAX.PANEL WIDTHW/ASTRAGALMAX. PANEL HEIGHT 79"D.L.O.21" MAXDOUBLE DOOR UNIT W/SIDELITESSINGLE DOOR UNIT W/SIDELITESSINGLE DOOR UNITSINGLE DOOR UNITSINGLE DOOR UNITDOUBLE DOOR UNITWITH SIDELITEWITH SIDELITE63" MAX D.L.O.X.XX.XXX.XXXX.X°Certification No: NI014620.02/NI014620.03Reviewed by: TDWDate Reviewed: 12/30/2020
C42715TOLERANCES UNLESSOTHERWISE NOTED.X = ±.XX = ±.XXX = ±ANGLES = ±UNITS ARE IN INCHESCLASS:ECO:2/18/2020CONFIDENTIAL PROPERTY OF PELLA CORPORATION. DO NOT DUPLICATE OR TRANSMIT WITHOUT THE EXPRESSWRITTEN PERMISSION OF PELLA CORPORATION. DO NOT SCALE. DRAWING BASED ON ASME Y14.5M-1994PELLA CORPORATION102 MAIN STREET, PELLA, IOWA 50219DRAWING NUMBER3 of 4DES-000063669PAGEREV1ENGR.:DRAWN:DATE CREATED:DES-000063669.DFTFILE NAME:DRW - ASSEMBLY - UNITH.ANDERSONJ.HOUSERCERTIFICATION,,,,F-PASS, 6'8" NON-IMPACT, GLAZED PANEL DB LOCKDETAIL "F" ASTRAGALSTRIKE PLATE TO FRAMEATTACH ASTRAGAL RETAINER BOLTDETAIL "E" ASTRAGALAS SHOWN.#8 x 2"DETAIL "C"DETAIL "D"#8 x 2"#8 x 2"#10 x 5/8"#10 x 5/8"#10 x 1"#10 x 1"GGHHSEE DETAIL"C"SEE DETAIL"D"4 MORE EQUALLY SPACED6"6"6"41.250"6"6"5.5"6"7.375"31"31"ALCCLBAABBLCLC3"6"3"6"7.375"31"31"3"6"3"6"3"3"6"3"6"3"6"3"SEE DETAIL"C"SEE DETAIL"F"3"6"SEE DETAIL"E"6"6"3"3"6"3"6"3"3"3"6"4 MORE EQUALLY SPACED6"LCCLLCLC#10 x 2-1/2"#10 x 5/8"INSWING THRESHOLD1.375"LCCLZ-SERIES O/S THRESHOLD1.482"INTERIOREXTERIORTYPICAL GLAZING DETAIL#6 X 1-1/2" PHSHOT MELTNON-IMPACT GLASSELASTOMERHOT MELTELASTOMER1/2" BITE.0124" TEMP.BUTYL, FOAM, OR METAL SPACER1" OR 1/2" INSULATED GLASSDECORATIVE INSERT(OPTIONAL)ASTRAGAL RETAINER BOLT HOLEMUST BE DRILLED THROUGHTHE THRESHOLD & INTO THESTRUCTURE DEEP ENOUGHFOR A 1.375" THROWX.XX.XXX.XXXX.X°Certification No: NI014620.02/NI014620.03Reviewed by: TDWDate Reviewed: 12/30/2020
C42715TOLERANCES UNLESSOTHERWISE NOTED.X = ±.XX = ±.XXX = ±ANGLES = ±UNITS ARE IN INCHESCLASS:ECO:2/18/2020CONFIDENTIAL PROPERTY OF PELLA CORPORATION. DO NOT DUPLICATE OR TRANSMIT WITHOUT THE EXPRESSWRITTEN PERMISSION OF PELLA CORPORATION. DO NOT SCALE. DRAWING BASED ON ASME Y14.5M-1994PELLA CORPORATION102 MAIN STREET, PELLA, IOWA 50219DRAWING NUMBER4 of 4DES-000063669PAGEREV1ENGR.:DRAWN:DATE CREATED:DES-000063669.DFTFILE NAME:DRW - ASSEMBLY - UNITH.ANDERSONJ.HOUSERCERTIFICATION,,,,F-PASS, 6'8" NON-IMPACT, GLAZED PANEL DB LOCKALCLCAAGLCLCGBHB31"31"7.375"SEE DETAIL"C" SHT. 24 MORE EQUALLY SPACED41.250"4 MORE EQUALLY SPACED6"3"3"6"6"SEE DETAIL"F" SHT. 26"6"6"3"6"3"3"6"3"6"6"6"6"6"3"3"6"SEE DETAIL"E" SHT. 26"6"SEE DETAIL"D" SHT. 25.5"3"3"6"3"3"6"6"6"LCLCLCLCLCLCTHE WOOD SCREW SINGLE SHEAR DESIGN VALUES COME FROMANSI/AF&PA NDA FOR SOUTHERN PINE LUMBER AND ACHEIVEMENTOF 1-1/2" MINIMUM EMBEDMENT. THE TAPCON MUST ACHIEVEWOOD BUCKS BY OTHERS MUST BE ANCHORED PROPERLY TOTRANSFER LOADS TO STRUCTURE.3.4.MINIMUM DESIGN VALUE STRENGTH OF ANCHORS 155 LBS.5.ANCHOR ANALYSIS FOR LOADING CONDITIONS PREPARED,FASTENER RATING FROM THE DIFFERENT FASTENERSBEING CONSIDERED FOR USE. JAMB, HEAD, ANDTHRESHOLD FASTENERS ANALYZED FOR THIS UNIT INCLUDE#10 WOOD SCREWS, 1/4" TAPCONS, AND #10 TEK SCREWS.A PHYSICAL SHIM MUST BE PLACED IN SHIM SPACE AT EACHANCHOR LOCATION. TAPCON EDGE DISTANCE MIN 2-1/2".1.ATTACHMENT DETAILSIGNED AND SEALED BY ROBERTO LOMAS, PE(FLORIDA #62514) WITH THE LOWEST (LEAST)MINIMUM EMBEDMENT OF 1-1/4".TYPICAL WOOD BUCKANCHOR INSTALLATIONCL1.50"MIN0.25"MAXSHIMCL1.25"MIN0.25"MAXSHIMTYPICAL MASONRYANCHOR INSTALLATIONWOOD SCREW EDGE DISTANCE MIN 3/4". TEK SCREW EDGEINTEGRAL WWMULLION (CHS)(4) #10X2-1/2"WOOD SCREWSEACH ENDCL1.25"MIN0.25"MAXSHIM1X BUCK MASONRYANCHOR INSTALLATIONANCHORING INTO STEEL STRUCTURE MUST BE SUFFICIENT TOACHIEVE 3 THREADS MINIMUM BEYOND STEEL INTERIOR SURFACE.2.DISTANCE MIN 1/2".PELLA ESSENTIALS GRADE 3 CYLINDRICAL LATCH AND GRADE 1CYLINDRICAL DEADBOLT TO BE INSTALLED AT 5-1/2" C/L.1.HARDWARE SCHEDULE4" X 4" FULL MORTISE BUTT HINGES.2.BALDWIN RESERVE CYLINDRICAL LATCH AND BALDWIN RESERVE1a.CYLINDRICAL DEADBOLT TO BE INSTALLED AT 5-1/2" C/L.X.XX.XXX.XXXX.X°Certification No: NI014620.02/NI014620.03Reviewed by: TDWDate Reviewed: 12/30/2020