The URL can be used to link to this page

Permit Folder 81 Beach Ave 1.3.2 All cutting and patching of existing and/or new building materials required for the installation of the mechanical work, shall be done under this section. No structural members shall be disturbed without the Architect's prior approval. All patching shall be done in a neat and workmanlike manner to match adjoining surfaces and finishes by mechanics of the particular trades involved. 1.4 APPROVAL OF MATERIALS 1.4.1 All materials shall be new and standard catalog products of a reputable manufacturer. One manufacturer's name and model is specified to establish type, quality and capacities. Equivalent equipment of the other manufacturers may be submitted for approval within 30 days after date of Notice to Proceed. Shop drawings will be required for approval for all equipment. 1.5 TEST REPORT 1.5.1 At the completion of the work, systems and equipment shall be balances to give the required quantities as shown on the plans. All adjustments required to obtain capacities as shown shall be made. 1.6. INSTRUCTIONS AND INSTRUCTION BOOKLETS 1.6.1 The Contractor shall instruct the Owner's representative in operating and maintaining systems including procedures for starting, stopping, and seasonal changeover; location and function of all switches and controls; and regular maintenance procedures. Obtain and turn over to the Architect a signed statement from the Owner's representative that such instruction has been completed. Submit to the Architect for approval three (3) bound sets of parts list applicable to all equipment; manufacturer's manuals, performance data, curves; and shop drawings as approved for items of equipment. 1.7 GUARANTEE 1.7.1 All equipment and systems specified in these sections of the specifications shall be placed in successful operation. All equipment and systems furnished shall be guaranteed for a period of one year from the date of final acceptance against defective materials, installation, or workmanship. Air conditioning refrigeration compressors shall have a 5 year warranty. -13- Upon receipt of notice from the Architect of failure or malfunction of any part of the guaranteed equipment or systems during the guarantee period, the affected part or parts shall be replaced with new parts or repaired promptly at no additional cost to the Owner. PART 2 - PRODUCTS 2.1 DUCTWORK 2.1.1 Air supply and return ductwork shall be a fiberglass duct system composed of 1" thick fibrous glass board, with a glass fabric reinforced embossed aluminum surface. The product shall have Underwriters Laboratories, Inc., Commercial Air Duct approval and each board shall bear this Underwriters Laboratories, Inc. label. Fabrication and installation shall be in strict accordance with manufacturer's published recommendations. 2.1.2 Duct may be either rectangular or equivalent sized round metal pipe externally wrapped with 1-1/2" fiberglass foil back insulation. 2.2 DUCTWORK ACCESSORIES 2.2.1 All square elbows in fan discharge ductwork shall have turning vanes as manufactured by Krueger: Titus: Carnes. 2.2.2 Duct extractor dampers shall be provided at all "Bull-head" take-offs from supply duct, and shall be Titus AG-45 with operator: Krueger; Carnes. When damper is accessible through grille, a No. 1 operator shall be furnished. A locking quadrant shall be used where duct is exposed or accessible. Spin-collar with extractor damper shall be used at round take=off from main duct. 2.2.3 Duct splitter dampers shall be constructed in accordance with SMACNA recommendations of 22 gauge galvanized sheet iron with leading edge hemmed. 2.2.4 Manual dampers shall be of the opposed blade type. Blades shall not exceed 10" in width of 16 gauge steel. All dampers shall be horizontal axis type with brass pin running in steel bearings. All dampers shall be built with solid stops, continuous on all four sides. Dampers shall have felted edges, with ends of blade and stops also felted. Manual dampers shall have extended rod and locking quadrant for positioning. 2.2.5 Fan and air unit connections to ducts shall have flexible connection , minimum of 4" long with 1" slack, with galvanized fastening strip. -14- 2.2.6 All grilles, registers and diffusers shall be aluminum. Plaster frames shall be furnished for all grilles, registers, and diffusers installed in plaster walls or ceilings. Krueger; Titus; Carnes. Provide off-white baked on enamel finish. 2.3 PIPING 2.3.1 Drain piping shall be run from the drain pan of the air handling unit with a "P" trap. Piping shall be Schedule 40 PVC pipe. Provide and pipe drain to terminate 611. above ground. 2.3.2 Refrigerant piping shall be type ACR copper tubing. Heat pump manufacturer shall verify that piping is properly sized for most efficient operation of his equipment. 2.3.3 Provide 3/4" Armorflex vapor barrier insulation and drain pipe and suction/discharge refrigerant line. 2.4 SPLIT SYSTEM HEAT PUMPS 2.4.1 Condensing Unit: 2.4.1.1 Cabinet shall be corrosion-resistant, 20 gauge zinc coated steel, finished with duracron baked enamel. Design of the cabinet shall allow rapid access to all components and connection. Provide seacoast construction in cabinet. 2.4.1.2 Compressor shall be resiliently mounted to prevent vibration transmission, and placed in a separate compartment for sound isolation. Compressor shall have crankcase heaters or equivalent protection, and motors shall be equipped with overheat-overload protection in the windings, and pressure relief valves. 1.4.1.3 Coil tubes shall be mechanically expanded, firmly bonding the tube to the shoulder of each fin. Coils shall be finished with corrosion-resistant coating and protected with heavy-duty grille. 1.4.1.4 Fan and motor shall be propeller type, direct-driven by a PSC fan motor, which is thermally protected against over-current and high temperature damage. Provide cover over top of motor for weather protection. Fan shall be aluminum construction. The air shall be directed ,AOW through the venturi air opening on top of the unit cabinet, upwards, through a heavy duty fan guard. "`15 1.4.1.5 Refrigerant circuit shall include a reversing valve, accumulator, high pressure safety control, and low pressure safety control/loss of charge protector. 1.4.1.6 Electric controls: Internally wired controls shall include the 5 minute compressor anti—short cycle timer, demand defrost system which defrosts automatically when static pressure probes and temperature sensor detect• frost, heat relay, fan relay and the compressor motor contactors. All inductive motor loads to have thermal protection, auto—reset. The 24 volt control circuit shall include a transformer and low voltage terminal board for external thermostat control hook-up. Control shall be mounted in a separate compartment. 2.4.2 Air handling unit: 2.4.2.1 The indoor air handler cabinet shall be constructed of corrosion—resistant, heavy gauge galvanized steel with large removable service panels. The interior of the cabinet shall be thermally insulated with 1—inch-thick, 1-1/2 pound density glass fiber insulation. 2.4.2.2 Coil: The indoor coil shall be aluminum plate—finned formed on multiple rows of tubing arranged in a staggered tube configuration. The tubes shall be mechanically expanded, firmly bonding the tube to the shoulder of each fin. 2.4.2.3 Indoor blower and motor shall be a forward—curved, statically and dynamically balanced centrifugal blower. the blower shell is mounted on a solid steel shaft supported by sealed ball bearings. 2.4.2.4 Refrigerant circuit: The factory installed refrigerant piping shall include the necessary components for each refrigerant circuit. 2.4.2.5 Filters: Units shall be shipped with 1—inch—thick permanent washable filters mounted in the factory installed flat filter rack on the return air opening. —16— 2.4.2.6 Electric heaters: Factory—assembled stages as specified, and complete with contactors, fan interlock, automatic and manual high limit switches, and heating elements encased in an insulated cabinet with attached control box. Include an airflow pressure switch. 2.4.2.7 Unit shall be mounted on vibration isolators. 2.4.2.8 Room thermostat to provide staged heating or cooling control with continuous or cycling fan operation, plus availability to operate electric heat without heat pump. Also, provide discharge thermostat to energize electric heater during defrost cycle, it supplemental heat is necessary. PART 3 EXECUTION 3.1 INSTALLATION 3.1.1 General: Except as otherwise indicated, install air cooled equipment, including components and controls required for operation, in accordance with manufacturer's instructions, and with recognized industry practices, to ensure that equipment complies with requirements and serves intended purposes. 3.1.2 Locate equipment in general position indicated in relation to other work. Position equipment with sufficient clearance for normal service and maintenance, including clearance for component replacement. 3.1.3 Install equipment on vibration isolation mounts in accordance with manufacturer's instructions. 3.1.4 Paint damaged and abraded factory finish with touch—up paint matching factory finish. 3.1.5 Grounding: Provide positive ground for equipment and components. 3.1.6 Wiring: Coordinate to insure responsibility for all power, interlock, and control wiring required for mechanical sections. i17— 14001, 3.1.7 Notice shall be given to the Architect and the Local Authority in writing before any tests are made and the tests are not to be concluded, or the pipes covered, until examined by the Local Authority, or his authorized deputy and the Architect. In case of defects being found, they shall be made good to the satisfaction of the Architect and the work retested without delay. Certificate of Inspection shall be submitted for each Local Authority for each required inspection. 3.1.8 Cleaning and protection of equipment: Contractor shall protect the units from damage from the time of their receipt until final acceptance and shall thoroughly clean the equipment of all dirt and construction debris prior to requesting final inspection. Casing panel, access doors, gaskets, coils and like items which become damaged during the course of construction shall be repaired to "as new" condition or shall be replaced with new material or equipment components. —18- (16) ELECTRICAL WORK (a) Furnish and install all labor, material, lamps, etc., required for installing and completing all electrical work shown on the drawings and/or listed below, in accordance with local codes, the National Electrical Code, the rules of the National Board of Fire Underwriters and good practice for the trade. (b) All panelboards shall be circuit breaker type as manufactured by Square D. Westinghouse, Trumbull or ,equal; shall be recessed type. Electrician to upgrade existing panel to accommodate the additional load from alterations and additions. (c) Wire shall not be smaller than No. 12, material shall be copper. (d) All wiring, conduit and devices shall be concealed and flush in all finished areas. (e) This Subcontractor shall leave the entire electrical system in proper working order, and shall, without additional cost to the Owner, replace any work or material which prove defective within one year after acceptance of the building by the Owner. (f) Light Fixtures: Refer to schedule on drawings. —19— i 3� 1 i a i i I { i 9 { G t� , 1 �' s BEFORE THE COMMUNITY DEVELOPMENT BOARD OF THE CITY OF ATLANTIC BEACH, FLORIDA No. V-87-4-0 WHEREAS, Chester Skinner, III; David G. Skinner; Katherine D. Newton; Christopher F. Skinner the owner of the real property described in this order has applied to the Community Development Board for a zoning variance, to construct an addition with total side yards of 10'4" in an RG-2 zoning district; and WHEREAS, the Community Development Board has considered the application and rendered an opinion; and WHEREAS, taking into consideration the above opinion, the Community Development Board . finds that the granting of such variance will not be contrary to the public interest and owing to special conditions a literal enforcement of the provisions of the Zoning Code will result in unnecessary and undue hardship; now, therefore, BE IT ORDAINED BY THE COMMUNITY DEVELOPMENT BOARD THAT: Section 1. Variance Granted Subject to Conditions. The owner/s of the real property described in this order are hereby granted a zoning variance from the requirement of Chapter 24 ' of the Ordinance Code of the City of Atlantic Beach permitting 10'4" total side yards; subject however to the condition that said variance shall be transferrable and shall run with the title to the property described in this order and subject further to the condition that said variance shall be commenced within one year from the effective date of this order. i'. Section 2. Owner and Description. The land as to which a zoning variance is granted by this order is owned by Chester Skinner, III; David G. Skinner; Katherine D. Newton; and Christopher F. Skinner and described as follows: A part of Lots 6 and 7, Block 33, Atlantic Beach Subdivision "A" Section 3. Effective Date. This order shall become effective upon it 's execution. Executed this 21st day of April, 1987. W. G egg Mc ie, Chairman Commu y De opment Board ATTEST: Rene' gers, � Sece ary Community Develo�7nt Board FORM APPROVED: C au L. Mullis, City ney OSPARTMENT OF BUILDING --W OF ATLANTIC BEACH, FLORIDA FOR OFFICE 'USE ONL ----------- - --- - Date +19 -- - - - Permit # a c ' Application for `Permit ~.. .. for isc. Alterations Valuation ' and RepairsHouse DESCRIBE: !state if to repair, alter, add to' or move building, -.erect awning or• s gns'. etc.) awnings Biz lding one �.eot �''�o. Blk No. Address Sub.Div..,. Owner's 'Name Valuation r BUILDINGS & OCCUPANCY Building Use - Residential or Business What Plumbing work to be done? Size sof Present Bldg. bot.: :;ize Size of Extension . . No. of stories now Material of Roof after alter Material of Present Building Material of Extension PLANS MUST BE SUBMITTED HF-REWITH SIGNS Size Classification (state whether ground,er)roof, wall, projecting material of Construction bann Illuminated? ype of illumination Will sign, be over public property? (State whether lamps or neon) SUBMIT DRAWING SHOWING CONSTRUCTION OF :SIGN AND METHOD OF HANGING WRITE ADDITIONAL INFORRMATION BELOW (For canvas awnings provide dimensioned drawing on reserve side) .� 4 YMPORTANT NOTICE: In consideration ofQA permit given for doing the work as described in the above statement, we hereby agree to perform said work in accordance with the attached plans and specifications, which are a part hereof, and in accordance with the building regulations of the City of Atlantic Beach, Couthern Standard Building Code) Signature of Builder or Owner Address Phone z, 81 BEACH AVENUE LEGAL: Part Lots 6 & 7, Block 26, AB ZONED: RG-2 - requirements on Page 3-23 STATUS: NONCONFORMING - refer to Page 3-17 (1) LAND AREA: 7,473. 32 + square feet HOUSE: 1200 square feet of heated living area 13' Total Side setbacks. Should be 15' . GARAGE: 488. 84 square feet. 19'6" front setback. Should be 20' .. 4'4" & 4'2" southside setback. Should be V . TOTAL: 1688. 84 total square footage built on the lot.. DENSITY: 23%. 12% buildable land area remaining for new construction which would come to apptoximate 622. 77+ square feet. `- C-TY O_ A",!-.',, iC :j,_.`.C'.�� r1:na:Dq. 7:30 P.". C Oco t ';i-r 12, 1971 C ITY "ALL. h'i Lam', r_C _,�,ACN, rl D.4 "M seta ng of the '�. �J OF !:;?;T was c i I ed to order by Chairi-'n :'G try { • TS;iCS 2t 7:30 P.?�• Hose in att%_n(I:nce -i;�re: C. T. iinrl. •.� :re t,_r�'o Ct� .r�fil•E- -1'.11_, i.. e R. C. '."OE-el, City ''.obert ?. Cocv. Ot'_c:'1 .;as i.ide by '!r. 1Su-icS L-Tld EecC;nded by .=• ?I Ci. :if',i1 to ai-::,rove the of the lr--t rrr_e tin;; as -e rotten el-id Cl_Sp ice .vith the 'lotion -..as c;-Lr Tied unnnirimsly. The- c_se befo.s the cc rd is an for relief by T.J. arae _ 0, Cc�i r C Or i7l do:r, -_n behalf o- "_ .,. -. elle '.7att5, v.'Cj% rty C?n-. t0 CC-r:S iyC'00 -^e `C.?t (;r)7'1s or tarots) on the proi;�rty u .de 6_- scuEsion as s1.o.vn on t_:e att.aC;:?d .r.?D sr_o:ring tale Survey of the .s shc.,n on the sub:itted r..p t-e bra Idi ng •i;11 rot conform to order:.=* ce rec••1-i:2 . tS by Utt (six. inches) on t coil sh �ir'3 and 1,311 (eiEhtccen inches) on •the _:Ort'iS;QO for a di,t nce of ap_,:G+'-_. ;j_ely 201 feet) T'u_*1 iirig 4;2ste ' �ftcr Gel_b2 'ation and discussions the fo1lo,Nip ot_on ti•,as ".a e by "_~e Luuis P. "7n7_lef b3 G..'-?ed ' cp •� �i ��ld the re.,. st be d cC'_i.In. 1.1PG11 T)rr'sentatic of _ot pla=n r'_^E`=wed by :'est=red :�-,I ve,-"Gr in -,.-.'ich the v--olatic-n c:c:?s not' e:°_i;; d lett (e hes) on 'V-,e i:i•' 1 Side ,d 611 (SLY, Lne'-.CS) on -1ci L;h vide on T.e .:otio�l .:a Sen_ed by C. '�• -1- , - G1�Z —L:,-:e eu?stion .;as called by the C_.��_rr-n and the vo e a :en -tiith all .__..., rs -resent vo1.irlg 1_r.:yT1-L—m_sly 5-n favor tta�.relle Ch iri7an aaacs recuested that t' e irarutes of finis =et'_ng reflect his Er ati rude a_nd appreciation, and that of the entire Board of -ki justment to ?1^. C. T. Tinsley fo~ the pro^pt and detailed -v ork he ..as done as Secretary of the Bo_rde his re,)uest -;as Seconced by cdone11 &-nd ?_^. 3-111 and ?.!r. Linsley .:as most c._ ,.�reciative of their kind ex-pression and consid-eration. _.._r e being no furthe_ t)'lzsii:esS to c0`,e '-3 e the Bo�-_rd at ;n,4s t- -,.a the =t ng - as adjourned at 8:20 'D OF c.^. R. C. Vo:-el. For City File o GTT_ OF A TT 4T T1C B`_AC , FL,C DA. l;c:i7r1' G. Isaacs. C - -.� .'i .`_.?:S ^�', r ?"• ROS r� B. COOL;. ,. Tcais B. ;,_ a-onei l_. •. ' -• ... a+v1111/11Yb rOK Orr'iCN USE ONLY CITY OF ATLANTICBEACH, FLORIDA ----------- Permit Date 19 u O 6 Application for Permit Permit # Fee $ � — forand isc. Alterations Valuation $ y House ## , Repairs - V1 DESCRIBE: ! (state if to repair, alter, add to or move buildin g, erect awnings or signs, etc. ) B�.xilding on: not 'To. Blk No. Address Valuation Sub.Div. Owner's Name 1, BUILDINGS & OCCUPANCY Building Use - Residential or Business What Plumbing work to be done? Size of Present Bldg. Size of Extension Lot: :: .2e No. of stories Material of Roof now after altered Material of Present Building Material of Extension PLA_'IS MUST BE SUBMITTED HEREWITH SIGNS Size Classification (state whether ground roof, wall, projecting Material of Construction banner) Illuminated? Type of illumination Will sign be over public property? (`tate whether lamps or neon) SUBMIT DRAWING SHOWING CONSTRUCTION OF SIGN AND METHOD OF HANf:ING WRITE ADDITIONAL INFORMATION B^LOW —_ (For canvas awnings provide dimensioned drawing on reserve side) IMPORTFINT NOTICE: In consideration of permit given for doing the work as described in the above statement, we hereby agree to perform said work in accordance with the attached plans and specifications, which are a part hereof, and in accordance with the building regulations of the City of Atlantic Beach. Southern Standard Building Code) Signature of Builder or Owner Address Phone r to Vl I%j U, C u -.- v' 14 t; �1 Cn '' 4� 3 z v - r \� k a • FOR OFFICE USE ONLY Date----------l-/13........19 Z' Permit #--7Z.?....Fee$••••••- CITY OF ATLANTIC BEACH Valuation $..__.(__. _ -'1QC�........... ........ FLORIDA House #........ �•••••.. --•--- APPLICATION FOR BUILDING PERMIT Application is hereby made for the approval of the detailed statement of the plans and specifications herewith submitted for the building or other structure described. This application is made in compliance and conformity with the Building Ordinance of the City of Atlantic Beach, Florida, and all provisions of the Laws of the State of Florida, all ordinances of the City of Atlantic Beach and all rules and regulations of the Building Department of the City of Atlantic Beach, shall be complied with, whether herein specified or not. The Contractor or Owner-Builder who has been issued a Building Permit is automatically responsible to ascertain that all sub- contractors engaged by him are duly licensed in the City of Atlantic Beach,Florida. To prevent delay or embarrasment regard- ing intermediate or final inspections it is suggested that a list of sub-contractors be submitted to this office so that licenses can be verified. Date. t11411v-641 Z3 Owner../11 _---�` .704! G --`— 'fit TT�� Address_./37f.A• i((N!�. ..--------Telephone No��"•".�?1 Architect------------------•------------------•---_- -----------------------------------------Addres&-.-........................................................Telephone No..------------------•-----_-- Contractor Builder_.�r__..V. L.P9.LS�_�a A-_------------------Address/OtJf".�7�t�`P��'.�e------._�.QTelephone Lot No------- ----- --7........................Block No.--j -----------------Sub Division....119- t09Wr!_''----------�./,49.q'01.--•-•----Zone----------------- treet Valuation $_��.0�.--~------Forswhat---u---ose will building Between-------------------------•---------------------------and---------•--•------•------- ------------- --. Sts. - ----- 1.3e-,e4 ---yct----- p0 S/�►/fv,l� purpose uilding be used-,PMid '-.QsVLGii,(-Type of construction.F� T.._WAVGrkE9 Dimensions of Building---------------------------------- .------Dimensions of Lot------..................................................Size of Footings-------------------------------------_ Size of Piers....-------------------------_----Size of Sills------------------------.-------Greatest Sill Span in ft............-•-----------.Type Roof...................................__ How will Building be Heated?_---------------------_............ ------_-_------Will Building be on Solid or Filled Ground?........................................ Size of Ceiling Joists------------------------------------------- Distance on Centers---------------.--.---....................... Greatest Span------------------......................... it Size of Floor Joists-----------------------------------•----....... Distance on Centers.......... --------------------------------- Greatest Span.------------------------------------------- IF Size of Rafters--------------------------------------------------- Distance on Centers.. --- ---- ---------------------------, Greatest Span.---------------------------_---- " This rectangle is to represent the lot. Locate the building or buildings in the right position. Give distance in feet from all lot-lines and existing buildings. REAR LOT LINE Two copies of plans and specifications shall be submitted with application. Inspections required. 1. When steel is in place and ready to pour footing. W W 2. When steel is in place and ready to pour columns and/or lintel. Z Z 3. When steel is in place and ready to pour beam. 14 '1 4. When framing is completed. N p 5. When rough plumbing is completed,'and ready to cover up. W W 6. When septic tank drain field or sewer is laid but before it is covered. q q 7. Electrical inspection by City of Jacksonville. 8. Final inspection. Note: In case of any rejection,re-inspection MUST be called for after corrections are made. FRONT OF LOT In consideration of permit given for doing the work as described in the above statement, we hereby agree to perform said work in accordance with the attached plans and specifications, which are a part hereof, and in accordance with the building regulations of the City tl tic B Signature of Builder- - --=-_ .............. Address_.` ...."- --` .. tic-r----fit?- --' Signature of Owner._d_... a..�� E---------------------------- Address.."319-----` ..... ,�J �s CITY OF ATLANTIC BEACH J �] APPLICATION FOR PLUVBING PERMIT PERMIT NO. / Date : LOCATION Str6et LOT N0 . 17 BLOCK N0. S/D ` OWNER r " MASTER PLUMBER v BUILDER OR CONTRACTOR , Bldg. Permit_.i�To.. -2 � TYPE OF BUILDING _L_SIl �LAVATORY�I BATH TUBS URIFTALS_CLOSETS FLOOR DRAINS__] SHOWERS WATER HEATERS_ DISH4ASHERS tp yDISPOSALS�OTHER ,� , -., 4 ,jt,( TOTAL FIXTURES 19 "h1 , 00 NO WORK MUST BE DONE UNTII A PERMIT HAS BEEF? PROCURED PLANS AND SPECIFICATIONS must show a plan and description of the size .-.and location of all the soil and vent pipes, and the number and location of all fixtures, (in accordance with Ord'nance n,*. 188 of the City of Atlantic Beach, Fltjrida) must be showrr on back of appli- cation and be approved by the Plumbing Inspector. DRA4 PLAN AND SIECIFICATION OF ABOVE PLUMBING ON BACK. Lpproved by Plumbing Inspector Date (FOROFOFFICE USE ONLY) ROUGH-IN INSPECTED�0 —REMARKS FINAL INSPECTION:�/j"-2Z_ CERTIFICh.TE ISSUED: 81 BEACH AVENUE LEGAL: Part Lots 6 & 7, Block 26, AB ZONED: RG-2 - requirements on Page 3-23 STATUS: NONCONFORMING refer to Page 3-17 (1) LAND AREA: 7,473.32 + square feet HOUSE: 1200 square feet of heated living area 13' Total Side setbacks. Should be 15". GARAGE: 488.84 square feet. 19'6" front setback. Should be 20' . 4'4" & 4'2" southside setback. Should be V. TOTAL: 1688.$4 total square footage built on the lot., DENSITY: 23%. 12% buildable land area remaining for new construction which would come to approximate 622.77+ square feet. FOR OFFICE USE ONLY Date....................................19 ...... Permit #-I i7 Gl.-.....Fee$.r� .................. CITY OF ATLANTIC BEACH a � Valuation $---lC�.dd FLORIDA House # .�......................... C .................... APPLICATION FOR BUILDING PERMIT: •--•--••----•----.......................................................... ........................................... Application is hereby made for the approval of the detailed statement of the plans and specifications herewith submitted for the building or other structure described. This application is made in compliance and conformity with the Building Ordinance of the City of Atlantic Beach, Florida, and all provisions of the Laws of the State of Florida, all ordinances of the City of Atlantic Beach and all rules and regulations of the Building Department of the City of Atlantic Beach, shall be complied with, whether herein specified or not. The Contractor or Owner-Builder who has been issued a Building Permit is automatically responsible to ascertain that all sub- contractors engaged by him are duly licensed in the City of Atlanfic Beach,Florida. To prevent delay or embarrasment regard- ing IntermedJate or final inspections it is suggested that a list of sub-contractors be submitted to this office so that licenses can T'F beverified. ( &P—rscT Rocr QV&12 PR-rlo ' .,' ' p f -'.._....'.f .aa......,,.F.j.._-•---••----._.. �._.......f..._T....._..T.. Date........................ .at e-=."..._ ........ ..........:-..•.� �� ..o ..------.----�--•--•�-II---- -►!//�••1-•9;- rTy.Z Owner....... 1..j. A ..-- . ` Architect...................... --•----Address.. . . . AI ----- ...........Telephone No...........---•-----••-.....a...• _. ....----.._....Address._.......—'..............................................Telephone No................... Address.__ �� Jfih-•-�y�, e' ne No... Builder.... h.R fEL ..... ........Tele hoLot No. l. ............Block No.----..- -----•--- ---Sub Division-....�-/ � C --.... . fC_F -----......Zone................. � j . ----.Side Between----------------------..............................and................... Valuation $....fco.4tK - ••-•.............Sts. what purpose will building be used..................... Type of construction -- ---------- Dimensions of Building........................................Dimensions of Lot-.-.-................. ----•-•----•....................:Size of Footings............................-......... Size of Piers.....................................Size of Sills------------------- .-_._Greatest Sill Span in -------------_. - •---Type Roof-..................................... How will Building be Heated?—...-----....................... Will Building be on Solid or Filled Ground?_..___...__..__._._._ Size of Ceiling Joists------------------------------------------- Distance on Centers............................................. Greatest Span............................................ „ Size of Floor Joists............................................... Distance on Centers........... ................................. Greatest Span............................................ » Size of Rafters.......................-------- ............. Distance on Centers._..... .......... ----• --------•-, Greatest Span............................................ „ This rectangle is to represent the lot. Locate the building or buildings in the right position. Give distance in feet from all lot-lines and existing buildings. REAR LOT LINE Two copies of plans and specifications shall be submitted with application. Inspections required. 1. When steel is in place and ready to pour footing. 2. When steel is in place and ready to pour columns and/or lintel. Z 3. When steel is in place and ready to pour beam. a 4 4. When framing is completed. H 5. When rough plumbing is completed,and ready to cover up. S 6. When septic tank drain field or sewer is laid but before it is covered. W W 7. Electrical inspection by City of Jacksonville. A A S. Final inspection. Note: In case of any rejection,re-inspection MUST be called for after corrections are made. In consideration f permit FRONT OF LOT p given for doing the work as described in the above statement, we hereby agree to perform said work in accordance with the attached plans and specifications, which are a part hereof, and in accordance with the building regulations of the City Atl tic B ch. Signature of Builder.__ --..�t'' /C� •� p ........................... Address---./..__41. -- •- •---- Signature of Owner. Ct Address--- ------------ ddress-- ,1 .... 3��i _..... FOR OFFICE USE ONLY 0 Date--------•77 7--•----1s ...7 Permit # .....Fee$4z....... ITY OF ATLANTIC`BEACH Valuation $..Ie;,l.......................................... FLORIDA House #......f.g...... 6167--1 ............................................................................ APPLICATION FOR BUILDING PERMIT ............................................................................ ............................................................................ Application is hereby made for the -approval of the detailed statement of the plans and specifications herewith submitted for the building or other structure described. This application is made in compliance and conformity with the Building Ordinance of the City of Atlantic Beach, Florida, and all provisions of the Laws of the State of Florida, all ordinances of the City of Atlantic Beach and all rules and regulations of the Building Department of the City of Atlantic Beach, shall be complied with, whether herein specified or not. The Contractor or Owner-Builder who has been issued a Building Permit is automatically responsible to ascertain that all sub- contractors engaged by him are duly licensed in the City of Atlantic Beach,Florida. To prevent delay or embarrasment regard- ing intermediate or final inspections it is suggested that a list of sub-contractors be submitted to this office so that licenses can be verified. Da, ---------- /10 I....................... 19-h.... ----------------- Owner__/&� ----(------------ Address---!!K.?............ ....... %��--------Telephone No............................. . ....;- - -_ -------------------------- Architect.............................................. --------------------Addresa...-44-�1 ...................................................Telephone No... •........... Address--- ............Telephone No-------------------_-- Contractor jBflder_.' -._._Lot N ---KJ?-------------------Block No_3-3---- -----Sub Division-------------------------------------------------------------------------._.._._Zone._....----------- ............................................................Street--------.................Side Between--------•-----... ------------------------------and......................................................Sts. Valuation $/7----AA::1.........For what purpose will building be ------_-------Type of construction..'e-;_2 Dimensions of Building S./....Dimensions of Lot....3 L --_-_-----_--_-_--Size of Footings---- -------------- Size of .............Size of Sills---------------_-------------Greatest Sill Span in ft/-.? ..........Type Rooi—..—. How will Building be Heated?-----------------.............................................Will B9ilding be on Solid or Filled Ground?........................................ Size of Ceiling Joists._Ar�------__------....... Distance on Centers......... .................... Greatest Span...... ........................... Size of Floor ....................., Distance on Centers...... ......................... Greatest Span... .................. ----- Size of Rafters........ _ --------------------- - Distance on Centers..../ ........................... Greatest Span./_� .................. This rectangle is � ----- to represent the lot. This permit includes moving existing garage. Locate the building or buildings in the right position. Give distance in feet from all lot-lines and existing buildings. REAR LOT LINE Two copies of plans and specifications shall be submitted with application. Inspections required. 1. When steel is in place and ready to pour footing. 2. When steel is in place and ready to pour columns and/or lintel. Z Z 3. When steel is in place and ready to pour beam. 4. When framing Is completed. E-4 5. When rough plumbing is completed,and ready to cover up. 3 6. When septic tank drain field or sewer is laid but before it is covered. r 7. Electrical inspection by City of Jacksonville. 8. Final inspection. Note: In case of any rejection,re-inspection MUST be called for after corrections are made. ti FRONT OF LOT In consideration of permit given for doing the work as 'described in the above statement, we hereby agree to perform said work in accordance with the attached plans and specifications, which are a part hereof, and in accordance with the building regulations of the CAYE o tic Beach. Signature of Builder------- .........t�! --ta. ................... Address............... 'r ------------ ---------------------------------------------- Signature of Owner.;?/�/ --_------------ _1..A0............................... Address.... ------ CITY OF ATLANTIC BEACH 1 800 SEMINOLE ROAD ATLANTIC BEACH, FLORIDA 32233 INSPECTION PHONE LINE 247-5826 „C !tit Application Number . . . . . 05-00029493 Date 1/06/05 Property Address . . . . . . 81 BEACH AVE Tenant nbr, name . . . . . . REROOF Application description . . . ROOF Property Zoning . . . . . . . TO BE UPDATED Application valuation . . . . 6750 Owner Contractor ------------------------ ------------------------ SKINNER, DAVID G. REAVES ROOFING INC. 6803 OLD KINGS RD. S . PO BOX 3995 JACKSONVILLE FL 32217 JACKSONVILLE FL 32206 (904) 354-8201 ---------------------------------------------------------------------------- Permit ROOF PERMIT Additional desc . . Permit Fee . . . . 98 . 00 Plan Check Fee . 00 Issue Date . . . . Valuation . . . . 6750 Fee summary Charged Paid Credited Due ----------------- ---------- ---------- ---------- ---------- Permit Fee Total 98 . 00 98 . 00 . 00 . 00 Plan Check Total . 00 . 00 . 00 . 00 Grand Total 98 . 00 98 . 00 . 00 . 00 BUILDING MATERIAL,RUBBISH AND DEBRIS FROM THIS WORK MUST NOT BE PLACED IN PUBLIC SPACE,AND MUST BE CLEARED UP AND HAULED AWAY BY EITHER CONTRACTOR OR OWNER. "FAILURE TO COMPLY WITH THE CONSTRUCTION LIEN LAW CAN RESULT IN THE PROPERTY OWNER PAYING TWICE FOR BUILDING IMPROVEMENTS"ISSUED ACCORDING TO APPROVED PLANS WHICH ART OF THIS PERMIT SU ECT TO REVOCATION FOR VIOLATION OF APPLICABLE PROVISIONS OF LAW. BUILDING OFFICIAL i s, CITY OF ATLANTIC BEACH PERMIT CALCULATION SHEET r J if l�r . Date ( • 0 Address 0314 Fv Permit fee based on dollar evaluation as indicated on permit application. Heated Square Footage @ S per sq ft= $ Garage / Shed @ 5 per sq ft= 5 Carport/Porch @ S per sq ft= S Deck @ 5 per sq ft= S Patio @ S per sq ft= S TOTAL VALUATION: S S $35.00 V, 51000.00 $ 535.00 Total Valuation 5 5 $ 3-0 Remaining Value Per thousand or portion thereof- CONSTRUCTION TYPE: TOTAL BUILDING FEE S _ ZONING: + %Z Filing Fee $ FLOOD ZONE: ( ) Fireplaces @$35.00 $ IMPERVIOUS SURFACE: G BUIIIDING PERMIT FEE S `t WATER IMPACT FEE $ SEWER IMPACT FEE $ WATER IM ETER/TAP $ CAPITAL EM[PROVEMENT $ SEWER TAP $ C ( )RADON HRS .0050 $ SECTION H PAVING $ CROSS CONNECTION $ ST ( ) SURCHARGE $ OTHER 5 k l Cc. CITY OF ATLANTIC BEACH D. Ford BUILDING / ZONING DEPARTMENT S$ S. Doerr J 800 Seminole Road J _ ? Atlantic Beach,Florida 32233 (904)247-5800 (904)247-5845 Fax PLAN REVIEW COMMENTS Permit Application # O S- -z`1 C- Property Address: 01 br=-AC-14 1--,V(L Applicant: t -El" --E:ZL . Project: This permit application has been: E�' Approved EJ Reviewed and the following items need attention: Please re-submit your application when these items have been completed. Reviewed By: Date: J� v CITY OF ATLANTIC BEACH ROOFING PERMIT APPLICATION Date: Job Address: GAy. Owner of Property: X C S e12- Q Address: Q • .7, ��,�C �l� Telephone: ! 0 Contractor: State License Number: CCCQ;7 4bS Contractor's Address: ,.T� Telephone: �7�.�T' ' �i�0 !3 tla", 8 Fax: Scope of Work: AAi2,0 0`Q;AV �DLt-A Deck Slope: .rl 2 Greater than 2:12 Less than 2:12 Valuation of work: l • Product Name(Example: Timberline): � C It e Manufacturer(Example: GAF): 6 4 d�L ASTM Designation(s):Q, � &V(V Required Inspections: Sheat ' g and Final Signature of Owner. Date: Signature of Contractor: Date: AS TO OWNER: 20G>SSworn to and subscribed before me this lP day of .,20615- State tate of Florida,County of Duval Notary's Signature:' k1 • wt/�� PAMELA W. WALKER Notary Public, State of Florida Personally known My comm. exp. Oct. 10, 2007 ❑ Produced identification Comm. No. DO 251330 - Type of identification produced AS TO CONTRACTOR: Sworn to and subscribed before me this day of j rte' , 20 State of Florida,County of Duval Notary's Signature: kAA p�c,St� [Personally know El Produced identificatio C401M 1 Type of identification roduced 800 Seminole Road Atlantic Beach,Florida 32233-5445 Telephone: (904)247-5800 Fax: (904)247-5845 •http://www.ei.atiantic-beach.fl.us Page 1 Revised 2/21/03 �— — CITY OF ATLANTIC BEACH DEPARTMENT OF BUILDING BW SEMINOLE ROAD-ATLANTIC BEACH,FL 32233-TEL: 247-5826-FAX: 247-5877 _ C 111PQF2AilATIt�N_ 1 PERMIT i1ttFORi�tATION Address: 81 Beach Avenue f permit Number: 21643 Atlantic Beach Permit Type: BUILDING Township: Range: Book: Class of Work: FENCE Lot(s): Block: Section: i Proposed Use: SINGLE FAMILY Subdivision: Square Feet: Parcel Number: Est. Value: t}WNER iNal~� IATI�3N ` Improv. Cost: Name: A.C. SKinner Date Issued: 3/20/2001 Address: 81 Beach Avenue Total Fees: 10.00 Atlantic Beach, Fl 32233 Amount Paid: 10.00 { Date Paid: 3!20/2001 Phone: (904)731-4818 _ —_ Work Desc: Waod Fence ---- APPLItATION FEES i CONTRACTORiSI _ PERMIT 10.00 PROPERTY OWNER I Inspection NOTICE- INSPECTIONS MUST BE REQUESTED AT LEAST 24 HOURS PRIOR TO INSPECTION BUILDING MATERIAL, RUBBISH AND DEBRIS FROM THIS WORK MUST NOT BE PLACED IN PUBLIC SPACE,AND MUST BE CLEARED UP AND HAULED AWAY BY EITHER CONTRACTOR OR OWNER "FAILURE TO COMPLY WITH THE CONSTRUCTION IMPROVEMENTS"CANRESULT IN THE PROPERTY OWNER PAYING TWICE FORBUILDING ISSUED ACCORDING TO APPROVED PLANS SONS OF LAWE PART OF THIS PERMIT AND SUBJECT TO REVOCATION FOR VIOLATION OF APPLICABLE i I r ATLANTIC BEACH BUILDING DEPT. D#te: 3/M91 e1 Receipt: 043497 L _.___ ----- N18il ZIM I DEPARTMENT OF BUILDING (� CITY OF ATLANTIC BEACH,FLORIDA PERMIT NO. 93 3 PERMIT TO BUILD 5t *00 T I THIS PERMIT MUST BE POSTED ON JOB n { I11 flc^�l � Date Dec. 10, 19 87 9333 *UrCAC. E124 1t 12/in/9 Valuation$ Fee$ S0.00 I�?al This permit not valid until above fee has been paid to City Treasurer,and is subject to revocation for violation of applicable provisions of law. This is to certify that LEGGETT HEATING Tr AIR CONDITIDNINT I has permission to bt INSTALL NEW SYSTEM I Classification RESIDENTIAL Zone Owned by SKINNER Lot --Block S/D House No. 81 BEACH AVENUE According to approved plans which are part of this permit NOTICE—ALL CONCRETE FORMS AND FOOTINGS MUST BE IN- SPECTED BEFORE POURING. PERMIT VOID SIX MONTHS I AFTER DATE OF ISSUE 4---0. 4 —, O Building material,rubbish and debris 34 from this work must not be placed iin public space, and must be cleared _ hauled away by either c n- 'k-acor or ow,nery ing official. FOR OFFICE PERMIT DATE USE ONLY NUMBER CONTRACTO PLUMBING ELECTRICAL SEWER WATER BUILDING AND ZONING INSPECTION DIVISIONq �;�, � sa CITY OF ATLANTIC BEACH ATLANTIC BEACH, FLORIDA $2233 APPLICATION FOR MECHANICAL PERMIT CALL-IN NUMBER IMPORTANT — Applicant to complete all items in sections I, II, III, and IV. I. LOCATION StAddress: OF Intersecting Streets: Between And BUILDING Sub-division II. IDENTIFICATION -To be completed by all applicants. In consideration of permit given for doing the work as described in the above statement we-hereby agree to perform said work in accordance with the attecKpd pians and specifications which are apart hereof and in accordance with the City of Jacksonville ordinances and standards of'good:prectice listed therein. Name of Mechanical Contractors Contractor (Print) i� Mester Name of ..:Property Owner Signature of Owner Signature of or A thorilmd Agenf Architect or Engineer Itt. 40INAL INFORMATION A' type of Nnq foal: B. G!IR IS OTHER CONSTRUCTION BEING DONE ON THIS BUILDING OR SITE? Q Cm—❑ LP ❑ Natural ❑ Contra[Utility IF VES,<GIVE NUMBER OF CONSTRUCTION Q Od PERMIT (306or — SpaCittl W, 600""EWIPMENT TO EE INSTALLID NATURE OF WORK ( list of eomponanfs on back of this form) Residential or ❑ Commercial N ❑ Spec* ❑ Recesad Central O Fkaor G7 New Building Air inq: Q Room Centra(" Existing Building 4► ant • Materia .� ❑ Ra lacement of existing system #Aosirrsum..pacify �� s:.f.m. New installation(No system previously installed) C1 Extension or add-on to existing system C) Rokigenho^ ❑ Other —Specify Q Cooling tower. Capacitor q.pns. ❑ Fint sprinMen: Number of heaa� Q Elavetw ❑ Manlfft ❑ Ese lator (number) THIS SPACE POR OFFICE {ISE ONLY D;6asolin pumps. (number) IRoo�Mrl) 0 To (number[ Remark: Q V6 contaiian__.___(number) Q Unfirad prauure vesws Parmit Approved by Dafa� Q �< Q cow — SPKKY Permit c.. LIST ALL EQUIPMENT AIR CONDITIONING AND REFRIGERATION EQUIPMENT p Number Vsdr. Dew"PtioA NO"Number Manufacturer (TOM)City wAgI1100y CITY OF ATLANTIC BEACH, FLORIDA Approved b CO Y APPLICATION FOR ELECTRI..A4 PERMIT TO THE CHIEF ELECTRICAL INSPECTOR: DATE: / I ' ©" 19� IMPORTANT NOTICE: IN CONSIDERATION OF PERMIT GIVEN FOR DOING THE WORK AS DESCRIBED IN THE FOLLOWING, WE HEREBY AGREE TO PERFORM SAID WORK IN ACCORDANCE WITH THE ATTACHED PLANS AND SPECIFICATIONS, WHICH ARE A PART HEREOF, AND IN ACCORDANCE WITH THE ELECTRICAL REGULATIONS, CODES AND CITY OF ATLANTIC BEACH ORDINANCES. ��Zvle� -nl EOCW,Y ELECTRICAL FIRM: MASTER ELECTRICIAN fIGNATURE JOURNEYMAN NAME R°R �k 1 P& ( oa�-A ADDRESS: 'F A vc- RFD-BOX- BLDG. FDBOXBLDG.SIZE 16 o r' moi • BETWEEN: RES.( APT.( ) COMM.( 1 PUBLIC ( ) INDUS. ( 1 NEW ( ) OLD REW. ( ) AODITION.o TRAILER ( 1 TEMP.f 1 SIGNS ( ) SO. FT. SERVICE: NEW( 1 INCREASE ( 1 REPAIR ( 1 FEE CONDUCTOR SIZE `7`1'0 AMPS r-;� G COPPER ( ► ALUM. SWITCH OR BREAKER �-' " AMPS PH 3 W 2 VOLT RACEWAY EXIST.SERV.SIZE 15 C) AMPS PH -3 W 2v VOLT RACEWAY FEEDERS NO. SIZE NO. SIZE NO. SIZE LIGHTING OUTLETS O CONCEALED OPEN TOTAL RECEPTACLES 3 CONCEALED OPEN TOTAL 0.90 AMPS. 91.100 AMPS, SWITCHES INCANDESCENT FLUORESCENT&M.V. FIXED 0.100 AMPS. OVER APPLIANCES BELL TRANSF. AIR H.P. RATING H.P. RATING CONDITIONING COMP.MOTOR OTHER MOTORS AMPS ICEIL HEAT: KW-HEAT 0-1 OVER MOTORS H.P. VOLTAGE PHS NO. 1 H.P. VOLTAGE PHS MISCELLANEOUS TRANSFORMERS: UNDER 600 V. OVER 600 V" DEPARTMENT OF BUILDING 9215 CITY OF ATLANTIC BEACH.FLORIDA PERMIT NO. PERMIT TO BUILD THIS PERMIT MUST BE POSTED ON JOB P7*Sn T 27,510r.KT Date October22 19 87 8494 IA 10/2P/n3 9215 9nl?CAC Valuation$ Fee$ 27.E 804 1 A 113/2218 This permit not valid until above fee has been paid to City Treasurer,and is subject to revocation for violation of applicable provisions of law. This is to certify that Crabtree Plumbing Co &C-032618 1 has permission to bXs x install plumbing -- Classification Residential Zone Owned by Skinner Lot Block S/D House No. 81 Beach Avenue According to approved plans which are part of this permit NOTICE—ALL CONCRETE FORMS t AND FOOTINGS MUST BE IN- SPECTED BEFORE POURING. PERMIT VOID SIX MONTHS 'n AFTER DATE OF ISSUE —.� --i O Building material, rubbish and debris zi from this work must not be placed in public space, and must be cleared = up an uled away by either con- tracp[�116r owner.j { Buildofscial. f FOR OFFICE PERMIT DATE CONTRACTOR USE ONLY NUMBER PLUMBING ELECTRICAL SEWER WATER i� CITY OF ATLANTIC BEACH APPLICATION FOR PLUMBING..PERMIT JOB LOCATIONv, 7 PLUMBING CONTRACTOR LICENSE NUMBERS U OWNER �z BUILDING CONTRACTOR TYPE OF BUILDING f U SINKS / LAVATORY SHOWERS WATER HEATERS BATH TUBS V DISHWASHERS URINALS DISPOSALS _CLOSETS FLOOR DRAINS WASHING MACHINE OTHER TOTAL FIXTURE COUNT . �-V INSTALLATION OF PLUMBING AND FIXTURES MUST BE IN ACCORDANCE WITH THE MOST RECENT EDITION OF THE SOUTHERN STANDARD PLUMBING CODE , I I ' ' DEPARTMENT OF BUILDING PERMIT NO. 9 1 4 G CITY OF ATLANTIC BEACH.FLORIDA PERMIT TO BUILD THIS PERMIT M4T BE POSTED ON JOB Date Seat 28 19 87 `-19 0 7S 1' 389:75CKY Valuation$ 100,000.00 _Fee$ X*ARM 339.75 6569 1A 9/3018 - 9142 .cNrAr, I This permit not valid until above fee has been paid to City Treasurer,and is 6689 I A� 9/3 0/8 subject to revocation for violation of applicable provisions of law. This is to certify that Florida Pro ert les CGCO27979 2905 Corithian Dr. Jacksonville has permission to build addition as Per dans »VSriSne•. gr�ntliXg'I II A Classification Re-ti a..,..�.,� 1_ —Zone Owned by Skimer Los Parts oBdLots 6 $ 7 Block_.-- 26 S/D "A" House No. 81 Beach According to approved plans which ate part of this permit NOTICE—ALL CONCRETE FORMS t AND FOOTINGS MUST BE IN- SPECTED BEFORE POURING. f PERMIT VOID SIX MONTHS „ AFTER DATE OF ISSUE 4— 111 O Building material,rubbish and debris Z from this work must not be placed in public space, and must be cleared and hauled away by either con- _ ; tr i or owner. 1y ing official.— FOR OFFICE PERMIT DATE CaNTRACTOR USE ONLY NUMBER PLUMBING ELECTRICAL SEWER WATER Aw s PLANS REVIEW CHECK LIST Address -------------------------Owner ,,� - - ---- Legal Dee criptiond��` _' - --� -------�--�-'L-Contractor---------yr,>,_^k> x t4kad)------------ -------------------------------------- License Number /1 ' License on File ES NO Section 24_101 * Zoning Regulations ZoningDistrict _ Proposed Use , ¢' ` -- �=- ---- q4 Required Lot Size f )Cl Actual Lot Size�X Setbacks Required Provided � t; Sectio ' k front '____ }_--_ CORNER LOT -- INTERIOR LOT rear side-1 Flood Zone ' - ------------ side-2 ti / Required Elevation_ 57 Max. Height Allowed ----- Proposed Height j J Section 24_82 * Minimum Lot Coverage Required Heated Arear � __ __ Proposed Area Section 24_161 +► Offstreet Parking Number Spaces Required__ 22-_- Spaces Provided__ Section 24_82 * Duplicate Buildings Is there a similar building within 500' of proposed building?YES fNo Utilities Water and sewer service is to be provided by: Buccaneer Utilities __L_ City of Atlantic Beach Utilities Private Sourc SEPTIC TANK WELL Plans Reviewed by Date,. _" a Building Permit # -_-- ISSUED DENIED Address• �c/e� r Ileated Square Footage @ $ 3%,5 0 per sq f t = $. 1J� c��C�• 06 Garage/Shed 0 @ $ per sq ft a $ Carport/Porch 0 @ $ ` per sq ft = $ Deck / cZ 2 @ $ per sq ft = $ Patio �2 0 Q @ $ per. sq ft — $ TOTAL VALUATION; $ ! " 000 Totai Valuation 1st $ ;5'O Doo o b _ o0an0 Al 6. 00 $ l4d 0CJ Renaincrer Valuation a,.doper thousand or , ortion thereof _ --------------------------------P--------- . Total Building Fee $ ADDITIONAL PE[tNITS and/or MS REQUIRED - � +'k Filing Fee $„ /13. �S Mechanical ; Q"Fireplaces @ 15.00 $ Pluibin = BUILDING f PERMIT F- - Electricc/Neta i ---- --- ---------------------- Electric/Teiq) Septic Tank BUILDING PERMIT $ 3,35, Z-� _ Well WATER METER CIIARGi's $ Stainming Pool S IMPACT FEE $ Sign WATER IMPACT FEE $ Water ConnectionMISCELLANEOUS $ Sewer Connection $ Water Meter $ Elevation Certificate' GRAND TOTAL DUE $ , --------------------------------------------------------------------------------------------- CALCULATIONS acid/or NUEES ' City of Atlantic Beach Fixture Unit Worksheet for Water ,Impact Fee ' FIXTURE UNITS ARE ESTABLISHED AS THE MEASUREMENT OF WATER DEMAND FOR EACH WATER FIXTURE UNIT INSTALLED AND CONNECTED TO THE CITY WATER SYSTEM. THE WATER SUPPLY CHARGE IS HEREBY FIXED AT TEN DOLLARS PER FIXTURE UNIT CONNECTED TO THE CITY WATER SYSTEM. ____BATHROOM GROUP CONSISTING OF _ --_SERVICE SINK TRAP STAND WATER CLOSET, LAVATORY & BATH (8) TUB OR SHOWER STALL (6) ___WATER CLOSET VALVE __WATER CLOSET, TANK OPERATED (4) VALVE OPERATED (8) _BATHTUB/SHOWER ' (2) ___URINAL WALL LIP (4) SHOWER GROUP PER HEAD (3) FLOOR DRAIN (1) SHOWER STALL DOMESTIC (2) LAUNDRY TRAY (2) LAVATORY (1 ) __COMBINATION SINK AND TRAY (3) WASHING MACHINE (3) _ __POT, SCULLERY SINK (4) ____ DISHWASHER (2) _ ---WASH SINK EACH SET OF FAUCETS (2) _KITCHEN SINK (2) _ ___DENTAL LAVATORY ( 1) _KITCHEN SINK WITH WASTE GRINDER (3) _ _DENTAL UNIT OR CUSPIDOR (1) _BIDGET (3) __URINAL STALL, WASHOUT (4) __FLUSHING RIM SINK (8) �_ _COMBINATION SINK AND TRAY WITI FOOD DISPOS. (4) _URINAL, PEDESTAL, SYPHON JET BLOWOUT (8) _DRINKING FOUNTAIN (1/2) _LAVATORY, BARBER/BEAUTY SHOP (2) _ _LAVATORY, SURGEONS (2) _SURGEONS SINK (3) __, __ICE MAKER (1/2) / 0 Q TOTAL FIXTURE UNITS � @ $10. 00 EACH $ JOB INFORMATION...b►-� ------------------------- L CITY OF ATLANTIC BEACH No. 5714 FLORIDA Sept-. 28 1987 NAME Florida_ Properties ADDRESS 2905 Corinthian CITY_ Jacksonville Water Impact Fee #40-343-3700 $65,00 HA , D l Parts of Lots 6 & 7 Block 26 "A" SEP V 1981 �7 When Signed, Dated and Numbered, This Becomes an Official Receipt MAKE CHECKS PAYABLE TO Received Payment CITY OF ATLANTIC BEACH, FLORIDA TREASURER SEP 23 1987 C1Tx OF ATLANTIC BEACH Building and Zoning APPLICATION TO MAKE ADDITIONS OR ALTERATIONS FOwner0kie Address `j `/ �"- ,�.a fl Phone 7.3) -5( Architect_ foti�. S c-� Address IL��'� '�;s°K � c t .9«` , �` Phone ,> Contractor lige r t. ,. rt, Address 1+;> fit; �� ,` � j,,N � Phone Contractors License/Certification Nunbers `tgc, a- ExPiration Date 6-30 Property Address �� tC vac��. I Zoning ('fMZ?s cF Lots# _Blcok �� Subdivision Valuation of Construction $ Cr Type of Cons truction f k' ri°t Describe Work to be Performed Materials to be Used Present Use of Building �'S ; x -4� Proposed Use of Building Flood Zone Dimemions of New Area: HEATEDCr GARAGE OR STORAGE CARPORT OR PORCH LECK ° PATIO .�. . YES NO N[aMBER Will there be an increase in nugnber ,of units? Will there be a decrease in nuiber of units? Any additional plumbing fixtures? Any new fireplaces? SUBMIT TWO COMpLM SETS OF PIANS INCLUDING SITE FLAN Signature OWNER Date Signature CONTRACTOR, t Ak FLORIDA ENERGY EFFICIENCY CODE FOR BUILDING CONSTRUCTION SECTION 9—RESIDENTIAL POINT SYSTEM METHOD COMATE ZONES FORM 90Q-A-8 DEPARTMENT OF COMMUNITY AFFAIRS NORTH 1 2 S This form may to used to%wivAletretraomppance with the Energy Code for new siny4Namlly dstaclod or mulWamly atteched&vOhgs under Section 9,An ahemative to ft method lor�ingle4w*detadred dwemnp,and multifamily attached dwelirps of Mrse;storles or less,Is provided In Section 10.MulUfamfly sftadwd dwdlngs prsater than three storks must comply under Section 9 or 5.Additions to existing residentW buUdings must comply under Section 9 or 10. Mormadon may be obtained km your local buldlrp departewnt or the Department of Community Affairs,Energy Code Program,2571 Executive Center Circle PROJECT NAME PERMITTING OFFICE: AND ADDRESS: C Y C CIRCLE CLIMATE ZONE: 1 2 BUILDER: PERMIT NO.: is OWNER: JURISDICTION NO.: 7 IO O DETACHED CHECK IF WORST ❑ IF MULTIFAMILY, GLASS AREA AND TYPE , ❑ NEW � ADD. CASE CALCULATION: NUMBER OF UMTS: CLEAR TINT,FlLM,SOLAR SCREEN }�r ATTACHED CONDITIONED CEILING INSULATION �n ver FLOOR AREA UNDER ATTIC I SGL ASSEMBLY L.__LIJ__1 SGL m� SGL . �. NEW ADD. [1-1 IOU R -m.[] R ' E.E � DBL NET WALL AREA AND INSULATION CBS fl= FRAME Ra STEEL STUD R= LOG R= M = m m m DUCTS COOLING SYSTEM HEATING SYSTEM HOT WATER SYSTEM IN UNCOND. L x IS C1t1 f SPACE ElCENTRAL D NONE El ELECTRIC STRIP 54 HEAT•PUMP U ELECTRIC ❑ SOLAR R = 11 ❑ ROOM ❑ NATURAL GAS ❑ ROOM/PTHP ❑ NATURAL GAS ❑ HEAT RECOVERY IN COND. ❑ PTAC ❑ OTHER FUELS ❑ NONE El OTHER FUELS ❑ OED.HEAT PUMP SPACE Q R = SEER/EER • \ d .� COP/AFUE = D. 1 O EF -M SF/EF : [I.M �•© NUMBER OF BEDROOMS = INFILTRAPRUSED U �rl� s d U x 100 q ❑ #1 Q #2 2 #3 TOTAL AS-BUILT POINTS TOTAL BASE POINTS CALCULATED EP.1 CALCULATED ENERGY PERFORMANCE INDEX MUST NOT EXCEED 100 POINTS. In aocordanoe with Section 553.907 F.S.,i hereby certify that the plans Re+tew of the plans and apedficadons covered by flus cabAtIon irdcdw and specifications covered by flus calculation are in compliance with the compliance with the Florida Energy Code.Before corftu don is completed,ti b Florkle EwW Coda building w0 be Ygxded for compOwwo In acoardance wlh Section 553.We F.S. OWNER/AGENT: BUILDING OFFICIAL: DATE DATE: IMEASU RLIJIMM be met COMPOHM SECTION REQUIREMENTS 18� 904.1 MAXIMUM OF 0.5 CFM PER UNEAR -FOOT OF OPERABLE SASH CRACK All EXTERIOR 6 904.1 MAXIMUM OF 0.5 CFM PER SO.FT.OF DOOR AREA INCLUDES SLIDING GLASS DOORS,SOLID CORE,AWACENT DOORS _ WOOD PANEL INSULATED,OR QM DOORS ONLY. ✓ EXT.JOINTS 3 904.1 TO BE CAULKED,GASKETED,WEATHERSTRIPPED OR OTHERWISE SEALED. boll MUST BEAR LABEL INDICATING COMPLIANCE WITH ASHRAE STANDARD 90 OR COMPLY WITH EFFICIENCY AND WATER.HEATERS 9042 STANDBY LOSS REQUIREMENTS. SWITCH OR CLEARLY MARKED CIRCUIT BREAKER(ELECTRIC).OR CUT-OFF -EiM-MUST BE PROVIDED. AN g=RNAL OR BuILT4N HEAT TRAP MUST BE pWApEp, SWIMMING POOLS 904.3 SPAS&HEATED POOLS MUST HAVE COVERS(EXCEPT SOLAR HEATED). NON-cOMMERCIAL POOLS MUST A SPAS HM A UMP MER. GAS SPA&POOL HEATERS MUST HAVE MINIMUM THERMAL EFFICIENCY HOT WATER 904.4 INSULATION 1S REQUIRED ONLY FOR RECIRCULATING SYSTEMS. IN SUCH CASES,PIPING HENT LOSS SHALL PIPES BE LIMITED TO 17.5 BTUIHILINEAR FOOT OF PIPE, SHOWER HEADS 904.5 WATER ELOW M rED TO NO MOR THAN 3 GALLON '20 TO 00 PSIG., HVAC DUCT 9032 CONSTRUCTED IN ACCORDANCE WITH INDUSTRY STANDARDS d LOCAL MECHANICAL CODES. Ot1CTS JN904.6 E MUST BE INSULATED TO MINIMUM R- 42&JOINTS MUST BE SEALED WAC OMBOLS 904.7 DfLY ACCESSIBLE MANUAL OR AU`TOMokTIC THERMOSTAT FOR EA PCEILING t. MINIMUM SUMMER CALCULATIONS CLIMATE ZONES 1 2 3 BASE BASE GLASS SINGLE OR �DIIllBLF� x SOF = AGLASST GLAOR AREA x SPM ° SUMMER OR AREA x P P ( GLASS POINTS, CLEAR •• CLEAR T•• M PT 79.1 4 1 84.3 79.1 688 72.7 66.2 1 85.4 �i • 3 NW E 3 '! COND. TOTAL BASE BASE AWUSTED ;GLASS LT .15 x FLOOR + GLASS a ADJ. x GLASS a GLASS g T."'3 AL BASE SUM.PT. AS-BUILT COMPONENT AREA x BASE SUM. a SUMMER . COMPONENT AREA MOLT. a SUMMER Bms DESCRIPTION PT.MULT. DESCRIPTION 9C TNRU 9G) POINIS EXTERI 9AWACENT .7 3 EMBIOR 1 7.7L ADJACENT 2.9 0 UNDER ATTIC ui OR SINGLE Is A EM SLAB 1 —37.0 !. Y •� RAISED — F N RA PERIMETER N N NED FLOOR IN PLACE OF AREA. CONDIMNED SPACE. SUMMERI TOTAL COMPONENT BASE � I�QNENT AS-BUILT SUMMER POINTS .. TOTAL BASE TOTAL AS-BUILT I AS-BUILT I AS•BUILT AS43UILT COOLING BASE CSM x BASE = COOLING AS,BUILT x DM x CSM x CCM = COOLING SYSTEMCIL) POINTS .4e z3s Flo $-)a ,.% 4 6Zq i NUMBER BASH BASE AS-BUILT NUMBER AS-BUILT I AS-BUILT "MILT NOT. OF x ■ NOT NEATER NOT WATER OF x HWM x HWCM s NOT WATER WATER BEDROOMS HM I Mid BEDROOMS I mm SYSTEM •--- 3� •' Fa Slu ft C #ffciw lass om 0.83.see Stec.OW-2(a).Tint MuMp5m may be wad for pleas wltlt wW amens.Nm,or&L 17 mmr=W* i ff77M IIFHn-M-- �. �ITM-1 m EMAU SIR" -MUTT M- �Mmmm-y MM OFTEN Krffr M. MR-Mtl� t?S'1TMMIK 1f3m.E� wmm�� W WiFITS ■sTrrM� MITI r • 7' � + Tti 1 1 • •. ,. ,. GLASS x SINGLE • ' WPM GLASS AREA WIN.PTS_ m MAW E��.', ��!l�liC��:'S �-��`i�:it�FX�1�l��x��l�•��[i�o[�►IE� MA ��■�ressyQv15 X �■■ E-�■��a■�■��■��- �©ter mums ____rCONlD. TOTAL I BASE BASE ADJUSTED FLOOR 1- 1 -AREA__L_ARE4 I FACTOR I SUBTOTAL BASE WP BASE WIN.PT. AS�BUILT COMPONENT BASE WIN. 1 ' i COMPONENT AREA = WINTER AREA x MULT. WINTER DESCRIPTION PT.MULT. DESCRIPTION • - �I•T��l�;�_�1� C��I�R`�L��1�R!�;�NS"i1i��'��Cil! USE Q• r • r • TOTALTOTAL cBASE HSU BASE HEATING DU x HSM x mcm. y .1. i• .1 ./. J6 '•. T TOTALI'l BASE- BASE BASE To COWNG c NOT ••• t cMOTWATM AS-BUILT Pms IPOIINT •]INTS POINTS POINTS • POINTS POINTS. --1" P21aTtoru I r•.0PM I r•.n P21 117.0 n P.11 (' ti 1 /l • [I IN I L%l 11111.1. .•1\\d c"A,,461 Sol- MUM ■ �,�� /'.�'■ �■ ,•:., a /r ,•:,. ,r �,��iF�•� ■ � Csit7�'►7C��7�'7• iil�i�■�f�� > _■'3�. � '�■'�7 . �7• IIIDr � RAIS . EEr • • (SGS Table 9P) R-VALUE -y 1 1 M HEATWO SYSTEM IfiJ179RLIERS ,I CLWATE ZONES/ 2 iTI r Minimums:Central Unh 2.5 COP. ,r . PTHP Ni Room Units 2.2 COP. COP moans CoeMclent of Perfom ance. 9J HEATING CREDIT MULTIPLIERS(HC11) I Y Natural Gas HC .84-La .77 42 72W- -97 M Where more than one credit is claimed,multiply HCM's together.Enter product on paps 4. AFUE means Annual Fuel Utilization Efficiency, 9K COOLING SYSTEM MULTIPLIERS(CSM) u nh SEER 7.8• 8.0- 8.5• 9.0- 9.5• 10.8- 11.0- 11.8• 12.0• ER -71 a r 7 1i Minimums:Central Units 7.8 SEER Room Units 7.5 EER. PTAC under 13,000 BTUM 7.S EER,and over 13,000 BTUIH 7.0 EER SEER means Seasonal Energy Efficiency Ratio. EER means Energy Efficiency Ratio. 9L COOLING CREDIT MULTIPLIERS(CCM) SYSIMMI lin M 111211 MU P M De CEDSS CCM .90 VA02don or Mide-House Fen(CnpTd for only Opel CCM .95 Where more than one credit is claimed,multi CCM's together.Enter product onpage 2. 9M NOT WATER MULTIPLIERS(HWM) Sm PE Electric 84- 85 T WATER Resistance 41 -186 7 UP 39M —3891 2§78 _MW 3450 Natural Gas EF _ Other Fuels1 —1007 1749 -1 349.4 3354 3225 a105 2891 - 2795 2705 Water heaters must comply with prescriptive measures of Table 9A.EF means Energy Factor. 9N HOT WATER CREDIT MULTIPLIERS(HWCM) SYSTEM _T WATER C — Solar Water Heater 1 4 Heat Recovery Ung H r n i i r Dedicated Heat Pump A HWM must be used In conjunction with all HWCM.See Table 9M. SF means Solar Fraction. EF means En Factor. 9P INFILTRATION REDUCTION PRACTICE COMPLIANCE CHECKLIST(See Section 9W.2(Q) PRAO MP N RE I MENT FDR EACH P A COMPLYGjlCE WITHCHECKINF TIN R RIPTIYAS ON TA • W n r i rI 1 1 -Exteftiiicracks on Into I oned i Eqyj2mW with ii A0011 jii%j FnIODRO with iampers,Combustion devi22s see 903.2(n.-- Combustion lan- ,,ces Provided with outside combustion air. #1 AND 02 AND THEt r Install d. fd2LVJk_ I=plate penetrations sealed or Mrits&cracks on interior walls caulked,seal2d fiecir Sealed from condftiomd spaces, r i Combustion Appliances Be in unconditioned space(except direct vent),draw air from unconditioned space,exhaust byproducts to outside. Stoves see 903. DR•tU FLORIDA DEPARTMENT OF REVENUE H.7/87 CERTIFICATION OF PAYMENT OF FLORIDA USE TAX hereby affirm that 1 am aware of the provisions of Florida law which imposes a 5 percent tax on the use in Florida of goods and services purchased outside of Florida; that it is the obligation of the purchaser to remit the tax to the Florida Department of Revenue if it was not collected by the seller; and that I have remitted or will remit any applicable Florida use tax to the Department of Revenue In the month(s)of , 19 Type of License '� C� E�^<-� C{ � 121 License Number C(- C. V') (3) Type of Business Activities V- 1 ' (4) Issuing Authority Cts Pt'flrt�il C ,;Q�lo 1 --�- [5) Date.of Issuance T-X3-1 161 Name )-(�tk Address <� o Ccs r -ilt��1►� J�v s 2 City,State,Zip JfTy Sales Tax Number_.�26 Telephone Number 3i"`1-x'33 Sign ure Applican Date i g Authority Signa ure of Governme t (ficial SPECIFICATIONS FOR ALTERATIONS AND ADDITIONS TO THE BEACH HOUSE MR. AND MRS. CHESTER SKINNER 81 BEACH AVENUE ATLANTIC BEACH, FLORIDA DECEMBER 19, 1984 PAPPAS ASSOCIATES, ARCHITECTS, INC. 100 RIVERSIDE AVENUE P. 0. BOX 41245 JACKSONVILLE, FLORIDA 32203 JOB NO. 8624 TABLE OF CONTENTS DIVISION DESCRIPTION PAGE NUMBER LIST OF DRAWINGS GENERAL CONTRACTORS WORK 1 ALTERNATES 4 2 SITE WORK 4 3 CONCRETE 4 4 MASONRY 5 5 MISCELLANEOUS METALS 5 6 CARPENTRY 5 7 MOISTURE PROTECTION 6 8 DOORS, WINDOWS AND GLAZING 7 9 FINISHES 9 10 SPECIALTIES 11 15 MECHANICAL 12 16 ELECTRICAL WORK 19 "k LIST OF DRAWINGS COVER SHEET, SITE PLAN, LIST OF DRAWINGS A-1 FIRST FLOOR PLAN SECOND FLOOR PLAN INTERIOR FINISH SCHEDULE ELECTRICAL FIXTURE SCHEDULE A-2 EXTERIOR ELEVATIONS A-3 CROSS SECTIONS A-4 FOUNDATION PLANS FRAMING PLANS MISCELLANEOUS DETAILS A-5 STRUCTURAL DETAILS DOOR AND WINDOW SCHEDULES DOOR AND WINDOW DETAILS A-6 INTERIOR ELEVATIONS CABINET DETAILS M-1 FIRST FLOOR HVAC PLAN SECOND FLOOR HVAC PLAN EQUIPMENT SCHEDULE AHU/CU DETAILS 4-014 Specifications For Alterations And Additions To The Residence of Mr. and Mrs. Chester Skinner 81 Beach Avenue Atlantic Beach, Florida Architect: Pappas Associates Architects, Incorporated 100 Riverside Avenue P. 0. Box 41245 Jacksonville, Florida 32202 ' December 19, 1986 1. GENERAL CONTRACTOR'S WORK In addition to the Contractor's work of coordinating the various crafts and Subcontractors, he shall supply all labor and materials and perform all services for the following items: (a) Allowances: General Contractor shall include all allowances that may be specified under the various headings. If the allowance is exceeded, the Owner will be obligated for the difference; if the allowance is not used in its entirety, the Owner will be entitled to a credit of the difference. (b) Permits: General Contractor shall arrange for, provide and pay for all permits, licenses, etc. , that may be required. (c) Electricity: Electricity shall be obtained from existing service. (d) Water: Water shall be obtained from existing water supply. (e) Protection: General Contractor shall be responsible for the protection of all new work against damage. (f) Cleaning up: General Contractor shall keep the building and the premises reasonably free from refuse and waste materials during the progress of the work. He shall be held responsible for dirt and debris left by his Subcontractors and shall leave the building and the property entirely clean and in perfect condition, including final window washing, at the completion of the work. =1- (g) Owner will supply the General Contractor with six (6) sets of plans and specifications. Use of these plans and specifications and any detail thereof, by any other person or any other property than that shown on the plot plan is strictly forbidden by the Architect and anyone so doing shall be held liable. (h) Guarantee: General Contractor shall be responsible for and shall make good any defects due to faults in labor and/or materials which may arise or be discovered within one year after completion of the work. (i) Intent of Contract Documents: It is the intent of the drawings, of the specifications and of the General Contract to be awarded, that all of the labor and materials, guarantees and services shall be furnished by the General Contractor and his Subcontractors, shall include everything to complete the building, ready for use by the Owner, excluding such items as are specifically mentioned under "WORK NOT IN CONTRACT". (j) EXECUTION, CORRELATION, AND INTERPRETATIONS: (1) Should any discrepancy exist between drawings, specifications or should any error or omission exist which MOW Contractor might reasonably be expected to detect, the same shall be brought to the attention of the Architect before proceeding with work involved. (2) Contractor shall check figured dimensions, following same in preference to scaled dimensions. Computed dimensions shall have precedence over scaled dimensions; large scale drawings over small scale drawings. Architectural Drawings shall take precedence over mechanical drawings for dimensions. (3) In the event that there is ambiguity, conflict or disagreement relating to items or arrangements to be furnished under the Contract Documents, the Architect will determine which takes precedence. It is understood that the Contractor shall furnish items or arrangements of greater quantity, better quality, or higher cost as conclusively determined by Architect. (k) Paragraph 4.18.1 of the General Conditions is amended by addition of the following provisions: The parties agree that the Contractor's liability to the Owner under this provision shall not exceed $1,000,000. This provision is made in compliance with Section 725.06 Florida Statutes. —2— (1) The Contractor shall discharge by bonding or otherwise, any mechanic's or materialmen's lien or any attachment conditional bill of sale, chattel mortgage, security agreement or other encumbrance under the law of the State of Florida or otherwise by any person or persons whomsoever arising from any work done or materials furnished under this Agreement and filed or recorded against the construction site premises of the Owner. If any such lien shall be filed against the construction site premises or the Project, which lien is not released, satisfied or discharged by payment, deposit, bonding or otherwise within ten (10) days from the date Owner notifies Contractor of the existence thereof , the Owner may in addition to all other rights and remedies arising as a result of the filing of such lien, cause the same to be removed or discharged by payment bonding or otherwise the entire cost incurred by the Owner and so doing shall be a credit against any sums then or thereafter due to Contractor under this Agreement. (m) Article 11 of the General Conditions shall be supplemented as follows: (1) Certificates of insurance shall indicate the name of the company or companies carrying the specified coverage, the effective and expiration dates of the policies, and the provision that policies may not be materially changed, reduced in coverage or cancelled before the expiration date thereof, unless and until the issuing company mails thirty (30) days written notice by registered mail to the Owner. Prior to the commencement of work, the Contractor shall furnish the certificates to the Owner and the Architect. If the Contractor does not furnish, maintain or renew the certificates, throughout the period of his work, the Owner may at his option take out the necessary insurance and deduct the price thereof from the price stipulated in the Contract between the parties. No payment shall be made to the Contractor pursuant to the Contract Documents until a proper insurance certificate which conforms to the above--mentioned requirements is furnished to the Owner. (2) Contractors and Sub—contractors shall carry: (2.1) Workmen's Compensation as required by law with a least $100,000 employer's liability. (2.2) Contractor's Liability Insurance and the Contractor's Contingent Liability Insurance required in the amount of $100,000 combined single limits bodily injury and property damage on an occurrence basis, including personal injury, broad form liability endorsement, contractual and completed operation with comprehensive general liability endorsement. —3— (2.3) Comprehensive Automobile Public Liability and Property Damage Insurance, including coverage on owned, hired and non-=owned automobiles and vehicles used by the Contractor on or in connection with the work, shall have limits of not less than $100,000 combined single limit bodily injury and property damage per occurrence. (n) Termite Protection: General Contractor shall arrange for, provide and pay for treatment and insulation against subterranean termites under all concrete slabs and around the exterior foundation perimeter of the building; pest control service shall be reputable, recognized company acceptable to the Owner; termite treatment shall be bonded in writing and be guaranteed for a minimum of one (1) year from date of treatment. (o) Alternates: (1) Additive Alternate #1. Remove existing asphalt shingle roofing and provide new roofing as specified on existing portion of the house. (1) GENERAL: The building will not be occupied by the Owner during the work. Contractor shall install temporary dust walls and security walls or lock-off doors as required to isolate the work from the remaining portions of the house. (2) SITE WORK (a) Contractor shall repair all damages to site as a result of the work. (3) CONCRETE (a) Mix: 1 part Portland Cement, 2 parts sand, and 4 parts coarse aggregate; or transit mix having minimum compressive strength of 2,500 p.s.i. at 28 days. (b) Furnish and install all plain and reinforced concrete, anchor bolts, ties, reinforcing bars, reinforcing mesh and accessories shown and/or called for or required for the proper execution of the work. (4) MASONRY (a) Furnish and install all labor, masonry and material required for the proper completion of all masonry work shown on the drawings and/or required for the proper completion of the building. - 4_ (b) Materials: (1) Concrete Masonry Units: Pre-shrunk, moisture controlled load-bearing units. (2) Face Brick: Match sizes/texture of existing. (3) Mortar: Mixed by volume as follows: One (1) part Portland Cement, one—fourth (1/4) part hydrated lime, not less than 2-1/4 and not more than 3 times the sum of the volumes above of damp loose sand. Clean all exposed exterior and interior masonry surfaces with stiff fiber brush, detergent and water. (5) MISCELLANEOUS METALS (a) Furnish and install all miscellaneous steel, iron, and metal work required for the proper execution of the work. (b) Dissimilar Materials: Whenever in the work, dissimilar metals come in contact, coat contact surfaces of each with Bituminous paint. (c) Galvanizing: All steel sections, plates, anchors, and bolted connections to be hot dipped galvanized. Field welds to be coated with CZ11 zinc rich coating. (d) All materials shall be new, unused and perfect stock: free from rust, millscale and imperfections. (b) CARPENTRY (a) Furnish and install all lumber, plywood, nails, clips spikes, bolts, nuts, washers, wood screws, connectors, anchors, angles, joisthangers, etc., as may be required for the proper execution of the work in accordance with the Contract Documents. (b) Framing Lumber: #2 MG or KD or better Southern Yellow Pine or #2 Douglas Fir, or Larch, FB = 1350 p.s.i. , moisture content not to exceed 19%. Use rough sawn western cedar structural select for all beams and columns exposed to view. (c) Plywood: CC or CD Grade Fir or Yellow Pine Plywood, thickness as noted or indicated on the drawings. —5— (d) Treated Lumber: Required for all rough carpentry items to remain in contact with ground, concrete masonry or roofing. Treat with Wolmanized Salts, or Pentachlorophenol, applied at lumber yard prior to delivery in accordance with current recommendations of AWPA. (e) Stud Framing: Exterior walls and bearing partition, 2 x 6 and 2 x 4, spaced 16" o.c., crippled once in height; all other partitions 2 x 4 studs also to be 16" o.c. , double studs at each side of openings. Provide two 2 x 6 headers on edge minimum at all openings. (f) Solid Timber Floor Decking: At all balconies and decks, use nominal 2" x 6" wide S.Y.P. or Douglas Fir. Pressure treated as shown on drawings. Commercial grade. Lay in with 1/4" air space between planks. (g) Exterior Trim: Western Red Cedar, C Grade and better. (h) Exterior Soffits: 3/8" Western Red Cedar exterior plywood, rough sawn; provide 4" continuous vent opening backed with grey fiberglass screen cloth. (i) Interior Door Frames, Trim Base, and Cornice Trim: Clear Alow Douglas Fir. (j) Millwork cabinets, counters, laminated plastic assemblies, and millwork hardware are to be as detailed on drawings. All cabinetry and accessories as shown and detailed on the drawings, shall be included in the work. General Contractor shall be responsible for coordination of electrical and mechanical requirements of kitchen or plumbing fixtures to be installed within or adjacent to cabinets. (7) MOISTURE PROTECTION (a) Furnish all labor, material, services, equipment required to complete all shingle, roofing, flashing, and caulking required for the proper execution of the work. (b) Shingles. Johns-Manville, 20 year shingles to match existing shingles on main house. Also see Additive Alternate #1. (c) Flashing and Roof Sheet Metal Work: Provide all labor and materials required for flashing and roof sheet metal work indicated on the drawings and specified herein. (d) Materials: To conform with recognized commercial standards for basic materials. -6- (1) Galvanized Sheet Metal: ASTM A93, Class 1.25 paintlok, zinc—grip or equal where exposed to be painted. (2) Screws and Bolts: Galvanized, or non-ferrous metal. (3) Mastic: Asbetile by Johns-Manville. (4) Bituminous Paint: ASTM C1187. (5) Solder: Compound 40% lead and'60% tin for use with galvanized sheet. (6) Soldering Flux: Fed Spec. 0—F-506, Type I Form A or B. (7) Install all sheet metal work in accordance with approved S.M.A.C.N.A. Standards. (e) Sealants (exterior) : Dow Corning Corporation #780 one-part silicone rubber sealant. Color as selected by Architect or approved equal. (f) Sealants (interior) : DAP Butyflex, made by DAP Incorporated, or approved equal. (8) DOORS, WINDOWS AND GLAZING (a) Exterior Bathroom Door: Wood Stile and Rail — Comply with ANSI/NWMA, 1.5.1 and Section 1400 of AWI "Architectural Woodwork Quality Standards" Material: Natural Birch, Douglas Fir or similar woods. (b) Exterior Doors at Ocean Side 1. Frame shall be treated Western Pine at head and jambs with all interior surfaces veneered and edge—banded. All exterior surfaces except sill shall be clad with aluminum, coated with baked enamel. Aluminum weatherstrip stop shall be integral with frame. Metal sill shall be solid extruded aluminum with hardwood insert at threshold. Frame Depth shall be 6-=1/211. 2. Door panels shall be 1-7/8" (48 mm) thick with solid wood cores of randomly finger-jointed laminted blocks, cross-banded on both sides. All interior surfaces shall be veneered; all exterior surfaces shall be clad with aluminum coated with baked enamel. Provide optional screen door. 3. Glazing shall be tempered double glass with solar bronze tint. Contractor to submit samples to Owner for selection. -7.: 4. Weatherstripping shall be polypropylene and polyethylene=covered urethane foam at frame head and jambs, with vinyl sweep at bottom rail of door panels. 5. Hardware shall include three brass hinges, locally-installed in frame. Handle and lockset shall be as selected, furnished and installed locally. 6. Screen shall consist of extruded aluminum frame with fiberglass cloth, hinged to door frame. (c) Interior Flush Doors: Birch, 1-3/4" H.C. ; Closet Door: Bi-Folding - Fir; full louvered. Provide sample to Owner for approval. (d) Finish Hardware: Allow the sum of Seven Hundred Dollars ($700.00) for the purchase of finish hardware, which will be selected by the Architect. This allowance will include hinges, locksets, door closers, weather stripping and thresholds. (e) Windows: (1) All windows shall be Pella Clad doublehung and fixed sash tow units. (2) Frame and sash shall be treated Western Pine. Jamb liner sash slides shall be high-impact polyvinyl chloride. All exterior surfaces shall be clad with aluminum, coated with baked enamel. Frame depth shall be 6-1/211 and 5"; sash thickness shall be 1 3/4" (44 mm) . (3) Glazing shall be double glazing panels with solar bronze tinted glass. (4) Weatherstripping shall be foam at head, sill, checkrail and sash stiles. (5) Hardware shall include spring—type balances concealed within the frame and self—aligning sash lock and strike. (f) Mirrors: Unframed, fabricated from 1/4" thick polished plate glass of mirror glazing quality conforming to Fed. Spec. DD—G451C, Type 1, Class 1, Quality 03, edges ground and polished; with copper film backing electronically deposited to thickness of .0002" directly over silver surface. Two coats of clear varnish applied over copper coated surface and all edges. A —8r' (9) FINISHES (a) Ceramic Tiles: 4" x 411 x 1/4" ceramic tile units as manufactured by Windurn Tile Manufacturing Company, Florida Tile Industries, Inc., U. S. Ceramic Tile, American Tile Company, or approved equal. Colors and patterns as selected by Architect. Provide tile of quality certified by the Tile Council of America to equal or exceed the Standard Grade Requirements of A 137.1. Install in strict accordance with ANSI A108.6 and Tile Council of America Spec. F143.81. (b) Gypsum Wall Board: Furnish and install all gypsum drywall for interior walls and ceilings called for on Finish Schedule and/or shown on drawings for the proper execution of the work. (1) Drywall shall be 1/2" thick gypsum board specifically manufactured for the purposes. Moisture resistant gypsum board shall be used in baths and shower room and in any other areas where excessive moisture could be encountered. (2) Installation shall be by experienced, skilled craftsmen and in accordance with the highest standards of workmanship for the trade. (3) Carefully examine architectural details prior to starting work. (4) All exposed edges and changes of material shall have metal drywall stop; all external corners shall have metal drywall corner bead. (5) Joints shall be taped and filled; all nail holes and imperfections filled; filling shall be sanded smooth and all walls and ceilings left in perfect condition to receive painting or wall covering by others. (c) Quarry Tile: Includes but not limited to furnishing and installing quarry tile and setting bed. I. Floors and Patio a. Rectangular 4 x 8 x 1/2" 2. Color: a. To be selected by Architect from Manufacturer's standard colors. -9- 3. Approved Manufacturers: a. American Olean b. Sunshine Pavers EXECUTION 4. Mortar Bed: Thickness approximately 3/4 inch. Surface shall not vary more than 1/4 inch in 8 feet from required planes. 5. Tile Installation: Tile planes shall be level and true. Set tile with uniform joint. Joints shall line through. 6. Grouting: Follow Manufacturer's recommendations for grouting. Thoroughly brush out floor tile joints before grouting. Thoroughly force grout into joints to fill entire depth. Grout color to be selected. (d) Parquet Wood Flooring: (1) The Contractor shall provide a cash allowance of $6.00 per square foot for the purchase of unfinished solid wood parquet flooring. (2) Install parquet flooring over existing and new concrete slab as per manufacturers recommendations. (3) The Owner will select the parquet flooring, kind of wood and pattern of the units. (4) Parquet flooring to be finished with one coat stain and three coats moisture cure MC 100 polyurethane. (e) Carpet: Provide a cash allowance of $25.00 per square yard for purchase and installation of carpet and padding. (f) Painting: Provide all painting and finishing of surfaces as specified herein and as required for completion of finished work. (g) Wallcovering: 1. Provide a cash allowance of $30.00 per roll for wallcovering in master bath. (h) Painting: Provide all painting and finishing of surfaces as ow specified herein and as required for completion of finished work. -10- (1) First floor ceilings to match existing textured finish. (2) Exterior Trim: Glidden Primer and two coats Exterior Latex house paint to match existing trim and fascia. (3) Doors, windows, and trim at interior to receive primer and two coats of semi gloss enamel. 4) Galvanized metal, aluminum and non ferrous metal: Prime coat metalatex, acrylic emulsion vehicle equal to Sherwin Williams # B42W 100 and 2 coats metalatex semigloss enamel. (10) SPECIALTIES (a) Toilet Accessories: Provide a cash allowance of $300.00 for the purchase of toilet accessories. Medicine cabinets to be selected by Architect/Owner. . (b) Kitchen Appliances: Provide a cash allowance of $1,300.00 for purchase of the following kitchen appliances. Appliances to be selected by Architect/Owner. Grill Range Dishwasher Garbage Disposal Microwave with exhaust �11-� low HEATING, VENTILATING AND AIR CONDITIONING PART 1 — GENERAL 1.1 COORDINATION AND RESPONSIBILITY 1.1.1 The General Conditions, Supplementary General Conditions and Special Conditions are hereby made a part of the mechanical section of the specification and are to be consulted for instructions pertaining to this work. 1.1.2 All labor, material, equipment, and service necessary for and reasonably incidental to the proper completion of all work for the plumbing, heating, air conditioning, ventilation and other systems as shown on the drawings and specified herein shall be provided complete in operative condition. 1.1.3 All above—grade interior piping and ductwork shall be concealed in walls, furred spaces or above suspended ceilings in finished spaces. All piping shall be installed parallel to building walls. Materials and equipment shall be installed at a height so as not to obstruct any portion of a window, doorway or passageway. 1.1.4 Where interferences develop in the field, offsets or rerouting of piping and ductwork as required shall be done to clear such interferences. In all cases consult the architectural drawings for exact details before installing. 1.1.5 Notice shall be given to the Architect and the Local Authority in writing before any tests are made and the tests are not to be concluded or the pipes covered until examined by the Local Authority or his authorized deputy and the Architect. 1.2 JOB CONDITIONS 1.2.1 The Mechanical Drawings are diagrammatic and indicate the extent and scope of the work. They shall be followed as closely as actual construction and work of other trades permit. The Architectural and structural drawings shall be consulted for all dimensions, location, and sizes of partitions, structural supports, foundations, etc. 1.3 STRUCTURAL OPENINGS AND INSERTS ,,, 1.3.1 All openings, sleeves and inserts in concrete and masonry structures that are required for the mechanical work shall be sized, located, and set under this section. 112— RECEIVED CITY OF ATLANTIC BEACH MAR 1 9 2001 APPLICATION FOR FENCE PERMIT City of Atlantic Beach Building and Zonin Owners Phone Address O L Lot7—Block and/or Unit#;Zi--Subdivision Contractor if Different From Owner Valuation of Fence $ Corner or Interior Lot Type of Construction_ Attach Survey Showing location and height of fence as well as location of street(s). P R A v gEAC� C,p'OF Gj&Pp NG Off10E Ito �1Owners Signature � Contractors Signature