Permit Pool 860 Bonita Rd 2012 C Y OF ATLANTIC BEACH
IT
800 SEMINOLE ROAD
ATLANTIC BEACH,FL 32233
INSPECTION PHONE LINE 247-5814
Application Number . . . . . 12-00000372 Date 6/08/12
Property Address . . . . . . 860 BONITA RD
Application type description SWIMMING POOL/SPA
Property Zoning . . . . . . . TO BE UPDATED
Application valuation . . . . 30000
----------------------------------------------------------------------------
Application desc
new inground pool
----------------------------------------------------------------------------
Owner Contractor
------------------------
------------------------
KNIERIEMEN DANIEL J JR POOLS BY STELLA
860 BONITA ROAD 860 BONITA RD
ATLANTIC BEACH FL 322334229 ATLANTIC BEACH FL 32233
(904) 246-0521
----------------------------------------------------------------------------
Permit . . . . . . SWIMMING POOL
Additional desc . .
Permit Fee . . . . 200 . 00 Plan Check Fee 100 . 00
Issue Date . . . . Valuation . . . . 30000
Expiration Date . . 12/05/12
----------------------------------------------------------------------------
Special Notes and Comments
NEED NOC GEN LIA 6/6/12
2010 FLORIDA BUILDING CODE, 2008 NATIONA1 ELECTRIC CODE
REQUIRED INSPECTIONS :
*POOL STEEL
*ELECTRICAL GROUNDING AND BONDING
*FINAL (PUMPS MUST BE RUNNING FOR FINAL)
SWIMMING POOL SAFETY INSPECTION REQUIRED
Avoid damage to underground water/sewer utilities . Verify
vertical and horizontal location of utilities . Hand dig if
necessary. If field coordination is needed, call 247-5834 .
Note: Storm drain located in easement along west property
line .
Roll off container company must be on City approved list
and container cannot be placed on City right-of-way.
Contact Public Works (247-S834) for Erosion and Sediment
Control Inspection prior to start of construction.
Post construction survey documenting proper construction
will be required.
Contact Public Works (247-5834) for Erosion and Sediment
Control Inspection prior to start of construction.
----------------------------------------------------------------------------
Other Fees . . . . . . . . . STATE DCA SURCHARGE 3 . 00
ENG REV PRE APP > 3 HRS 25 . 00
PERMIT IS APPROVED ONLY IN ACCORDANCE WITH ALL CIT)PWTRARPX%dRF@bWX4ES AND THE FLORI;A 0 0
BUILDING CODES.
BUILDING PERMIT APPLICATION
CITY OF ATLANTIC BEACH
800 Seminole Road,Atlantic Beach, Fl, 32233
Office (904)247-5826 Fax (904) 247-5845
Job Address: (2 Cj 4�xj,,A Nth `2US�5 PermitNumber:
,jro_
Legal Description 1y%,A41'e Parcel#
3 iAA Sah k5d-m% "
Floor Area of -) Sq.Ft* Sq.Ft
Valuation of Work$ SO . 000 Proposed Work heated/cooled non-heated/cooled
Class of Work(circle one): New Addition Alteration Repair Move Demolition j`')Tsr"- indow/door
emo"L]��I)w
Use of existing/proposed structure(s)(circle one): Commercial Residential
If an existing structure,is a fire sprinkler system installed?(Circle one): Yes No N/A
Florida Product Approval 4
For multiple products use product approval form
Describe in detail the type of work to be performed: A .1,0" 1!-&A
I NJ F—
Property Owner Information:
Name: &11 Lpf 1"e.ykovi Address: C, &,u J OL
City 6
A, ak�ie. V-3� StatefA-Zip_X�Phone 1 a zj&
E-Mail or Fax#(Optional)
Contractor Information:
Company Name: ?--QLI 14 gQ stie&- kyv Qualifying Agent: kka- Vvt�e n e yyL e-K
C. -W I .. State jk Zip
Address: lkar, 9.x- mJmQA ty
Office Phone 1(qqLrAW-1 I& 01;-zA -Job Site/Contact Number (,q64) �gacZA _.-Fax# _C!j(14)zAilo c4z-%
State Certification/Registration# Ir 0 CA 4 C-1-7
Architect Name&Phone#
Engineer's Name&Phone# rn r n n v
Fee Simple Title Holder Name and Address rILE Orl lk I
Bonding Company Name and Address
Mortgage Lender Name and Address
A a e eb pade bana e mi to d he work and nsa a i ndica or installation has commenced prior to the
a',�aw thisjurisdiction. This permit becomes null
r ' 0 0 t to mZt i t5r irk is s aWeriod of sixJ6.1 months at any time after
'ic 'io 's h r y to 0 t p
s t a ha a w k epe med sta r
!s c c onf
0 1 ctric i I
�tru r0E e d1s,Pools, urnaces, Boilers,Heaters,
f r t
P t 0 w r
p
I once erm
t in s m t , or,
,d p k is no c e ed h i'(6 n
su
d stand that separate per its mu t be sec red
"'k is c f 'eced
r C
1 0 0
Tanks and A n;hd ners eta
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS
TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING., CONSULT WITH
YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF
COMMENCEMENT.
Ihere certifythatlh ere and examined ath',a lication and know the same to be true and correct. All provisions oflaws and ordinances governing this
171work will be m lie ith whether e herein or not. The granting of a permit does not presume to give authority to violate or cancel the
provisions of any othe fe era tate, or loca w ryulating construction or the Pe�fo�mance ofconstruction.
Signature of Owne Signature of Contractor
e V.A.Uk,�'
Print Name Print Name
. .. ...................................................................... .....................................
Swo criibe��be S 0 a s me
Wo ftd �ubscAbeld before
ol�
t,t*!�?"ayo�f\s rf 2012-- this< D o r A 20R-
1ruc c
February 14,2014
Notary Puftc-� SHIRLEY
MY COMMISSION POD 95776 ry bli
0 t Bond1led ZThru ota PU
EXPIRES:February 14,2014
Bon
ded Thru Notary Public Underwriters
Doc#2012071752,OR BK 15899 Page 1346,
NOTICE OF COMMENCEMENT NUmber Pages�I
Recorded 04,"03)2012 at 10:26 AM,
JIM FULLER CLERK CIRCUIT COURT DUVAL
COUNTY
Permit No. RECORDING$10.00
Tax Folio No.
THE UNDERSIGNED hereby gives notice that improvements will be made to certain real property,and in accordance with Section
713.13 of the Florida Statutes,the following information is provided in this NOTICE OF COMMENCEMENT.
I.Description of property(legal description): z., r ri Ui,A yoo t ia
a)Street(job)Address: 11,1 PA 82, -7-,
2.General description of improvements: rs-t Ji e,L Iml.1&r-, (I
3.Owner Information
a)Name and address: Fx-'VAJ,-,. 0j , A(?:?
b)Name and address of fee simple titleholder(if other than owner)
c)Interest in property L-o;t�a-e
4.Contractor Information
6L
a)Name and address: �'('A,-' kvu- "�A k YA-6 ef,-evh F,,.
b)TelephoneNo.: Fax No.(Opt.)
5.Surety Information
a)Name and address:
b)Amount of Bond:
c)Telephone No.: Fax No.(Opt.)
6.Lender
a)Name and address:
Phone No.
7.Identity of person within the State of Florida designated by owner upon whom notices or other documents may be served:
a)Name and address:
b)Telephone No.: Fax No.(Opt.)
8.In addition to himself,owner designates the following person to receive a copy of the Lienor's Notice as provided in Section
713.13(l)(b),Florida Statutes:
a)Name and address:
b)Telephone No.: Fax No.(Opt.)
9.Expiration date of Notice of Commencement(the expiration date is one year from the date of recording unless a different date
is specified):
WARNING TO OWNER: ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF
COMMENCEMENT ARE CONSIDERED IMPROPER PAYMENTS UNDER CHAPTER 713,PART 1,SECTION 713.13,
FLORIDA STATUTES,AND CAN RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY.
A NOTICE OF COMMENCEMENT MUST BE RECORDED POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING. 0 SULT YOUR LENDER OR AN ATTORNEY BEFORE
COMMENCING WORK OR RECORDING YOUR NOTICE F C MMENCEMENT.
STATE OF FLORIDA
COUNTY OF PINELLAS 10.
Siglmw'0�40wmer or Oyner's Authonized Officer/Director/Partner/Ma er
V=t'a"k- e*,,k evv\.
Print Name T—
The foregoing instrument was acknowledged before me this day of 20___,by
as -_qpe of authority,e.g.officer,trustee,
attorney in fact)for (name of ll�a�q ovbehalftf tom instru [ent was executed).
Personally Known OR Produced Identification Notary Si
Type of Identification Produc Name(print)
141FILEY L GRAHAM R
Verification pursuant "02.525;Mwift&MMM U er penalties of pe6ury,I declare that I have read the foregoing and that
the facts stated in it belief.
FORMS1N0C,msd201 0
Signature ot'Natural Person Signing(in line#10.)Above
Impervious Surface Calculations P
APR
to! 0 3 2012
House footprint 1271.41 sq. ft. �,y YV
Driveway & sidewalks 1050.00 sq. ft.
A/C and equiptment pads 50.00 sq. ft.
Detached garage 330.15 sq. ft.
Pool & Spa 402.00 sq. ft.
PoolDeck 720.00 sq. ft.
Total: 3823.56 sq. ft.
Total area of property: 7519.40 sq. ft.
3823.S6/7519.40=0.SO84 or 50%
E FILE COPY !
YA P SHO P,' .* VG BOUNDA R Y %50 VE Y OF
LOT 15, BLOCK 1 . ROYAL PALMS UNIT ONE
Plat Book 30, Pages 60 and 60A. Public Records Of Duval County, Florida
CER T1 F1 ED TO : Daniel J. Knieriemen Jr., Amnet Mortgage, Inc., dba
American Mortgage Network of Florida, Preferred Title Agency, LLC
Bonita Road
REILINE 183.32 (P) S851W48-E 80.93 (F)
13� S85-20-02 E 80.65 (P)
t Nbb Za 0 1 d,5.U21 N I
FOUND 1/2- REBAR
NO NUMBER ATTACHED -.A 4 D
AT BLOCK CORNER --25,94'
E
4- 4."iA
15.51'
3 .00 :— .. - . 4.- C ,
(00 i. ... oj�
L.r
10
a. 0
Lot# 16 1 Story Concrete IM
00
CL Block Dwelling
# 860
C4
0q
0)
0) 4
15.77' 49.70 JI: C8 L 5.57'
W L
4 Go
Frome
Garage
z
Lot# 15
16.24
Platted 5' Easement
Y485*05'28wW— b1.02 (F)
FOUND X CUTIN N85-20*02"W 80.65'(P)
CONCRETE — NO Lot# 20
Lot# 19 4' CHAIN LINK FENCE
.3' "OUTSIDE" LINE
(TYPICAL)
E0
FIL E C Py
FOUND 1/2- REBAR %
NO NUMBER ATTACHED A
AT BLOCK CORNER '25.94'
4.
LLJ (.�A
P� low L
15.51'
.So ..
10
Lot# 16 1 Story Concrete (b %D
a- Block Dwellin
9 !0
# 860
C4 q
0J 4
In
15.77' .04 IBM,- 49,70 -1: C-4
...... CJ 10 5.57'
Lai ko
Co
0)
Frame
2 (n
* Garage
z
Lot# 15
16.24
Platted 5' Easement
_A95_@_05'2 W bl.02 (F)
FOUND X CUT IN N85*20'02"W 80.65'(P)
CONCRETE - NO # Lot# 20
Lot# 19 T 4' CHAIN LINK FENCE
.3' "OUTSIDE" LINE
(TYPICAL)
PERRET AjVj0 ASAF06yjUrEASy. lyViCy.
1614 A7LANRC-UNIVERSIrY E JACKSONVILL& FLORIDA J2207 , L904) 805-OOJO --'FAX (904) 805-9888
GENERAL NOTES a I FW- 4=0 M rl.%j =:1, —
(1) BEARINGS SHOYM HEREON ARE BASED ON P.C. POINT OF CURVATURE ORB WMAL RECOM
P.T. POINT OF TANGMCY PG PAGE 6"WATER VALVE
Reference Bearing Line Shown CA cDM LINE ps PLAT B" N IWO R=\=II10L aWM AS KWW
R/W RIGHT–OF–WAY nof NOW OR FORMERLY
O.R.V. CITIClik RW=VOUK —0-0— 4' Chain Link Fence
(2) THIS PROPERTY HAS NOT BEEN ABSTRACTED AC AIR CONDIMNER DV SIB VALVE —13-0— 6' Wood Fence
FOR EASEMENTS. COVENANTS, REST'RICTIONS I.P. IRON PIPE C13
RBL FAM04CE W-AfMC LNE ES CLEANOUT —X—X— 4' Wire Fen ce
(3) UNDERGROUND U71UTIES SERVING THIS 0 SEr I/r 60 PPE P715 .9 FIRE HYDRANT -)�� LIGHT\ LIGHT ON POST OR POLE
PROPERTY HAVE NOT BEEN LOCATED OR 0 MW Iff FM PPE NO j WT _
SHOYM SET PK NAIL&DISC 15715 Opp WOOD POWER POLE '1EL.E:F-H0NE: RISIER
(4) IT IS THE LENDER'S RESPONSIBILITY TO MW Px NUAW No j
DETERMINE FEMA F.I.R.MAP STATUS FOR THE 1 20'
LIFE OF THE LOAN ON THE PROPERTY SHO SCAE
j NATHAN E. PERRET FLA. CERT NO. 57J2
ABOVE. SURVEYOR HEREON WILL CONFIRM 08-29-2007
FOR ADDITIONAL FEE. nAiv fe nn n - - - 77MO7HY L. BLACKMON, FLA. CERT NO. 4889 67
F B. 496 PG. 66 MOT VAUD wviwr NE_qGNAwRE&awww RAI&rD sEAL OF A RaWA UWMD&RIEMW&MAPM ORDER NO. 2007-431;
m
m
z
CY)
el -V ul
'lot
IM
CO) 10.5 in.
m -ul
z
0
m CA)
M
c LO
m
'Ul
--i cn cn co)
CD
79. -n a CO) T
= 0)
< :E 0 0
0
CL OD -4 40
CA)
0 :i- 2 w
0 CD CO)
:3 CL V) In CA)
0 CD CO)
@ -n -n
CD
nnny
WWI I
( Mimi
Pu
w
I.-
W
IIERce
0 cq 0 v 8
Z
0 U. 0)
M 0
L.L..
CL
x of--
0
Ir
'UI O'v 0 P co 20
:)F.z -j
z IJL A*
P a w ma M 5
Z <Ir z
0 w <
mill .C,10 U,
w 0: WZ
U)
w
> ca 0
'9, 9 F; I I I L��
01.: Wa
w
40 za �ue ......
z Cl:>* LLI W
C, �ow w C,
w . ce
w > 1 0 LU
o-wj
0 P z
WW2
co W 0
W 'O- w
a U- P LL.
0 'UI 9'm
Ul
0
0 D z
w :i
Z<LWL,-( -i a 'I" Lu
W
w Ir W CN f--j
w I--
T 0
> T'Mm 0- Z
< Z
w -j 0
m 0:0 < z
Lu co
0 (L
0 z W Z F- 0 Z
z 0
LIJ 0
S CL w -J
1�-4c >
ca -1 6 C3 0 m 5
;5 LL LLJ M
cn m <
Z
p LLJ
Z 0
0 < —i
0 0 LL
CL Cr LU
0 'r
F-
U-
0
ANSUASP-7 2006 Specifies three methods for determining the maximum system flow rate. The following simplified TDH
calculation is one of the methods specified.
Simplified Total Dynamic Head (TDH) Calculation Worksheet
TDH Calculation Options
For each pump
Check One.
F-1 Simplified Total Dynamic Head(STDH)
Complete STDH Worksheet-Fill in all blanks
F--I Total Dynamic Head(TDH)
Complete Program or other calcs. Fill in
reauired blanks on worksheet&attach calculations.
Determine Maximum System Flow Rate:
Minimum Flow Rate Required: 35 gpm Per Skimmer
1. Calculate Pool Volume:2)ko x x 7.48(gal./cubic foot)
(Surf.Area) (Avg.Depth) (Vol.in gal.)
2. Determine preferred Turnover Time in hours: x60 (min./hr.) = 2�,IIQ
3. Determine Max Flow Rate:t-I,-ZA 53" / '2 (Hours) (Turnover in Min.)
_,ke 0 + -2�L-1, --40
4. Spa Jets: x (vt n gal.) (Turnover Mins.) (Pool Flow Rate) (Feature Flow Rate)(System Flow Rate)
gpm per jet= -+e, flow rate.
(No.of Jets) (Jet Flow) (Total Jet Flow Rate)
(For single pump pool/spa combo, use the higher of No. 3 or No. 4 in the following calculations for the pool &spa)
Determine Pipe Sizes:
Branch Piping to be inch to keep velocity @ 6 fps max. at gpm Maximum System Flow Rate.
Trunk Piping to be 2, '5 inch to keep velocity @ 8 fps max. at gpm Maximum System Flow Rate.
Return Piping to be �2- inch to keep velocity @ 10 fps max. at I gpm Maximum System Flow Rate.
Determine Simplified TDH:
1. Distance from pool to pump in feet: tA 2-:>
2. Friction loss (in suction pipe) in 2-- 5 inch pipe per 1 ft. @ gpm (from pipe flow/friction loss chart)
3. Friction loss (in return pipe) in 2,S) inch pipe per 1 ft. @ I q I& gpm 01;I (from pipe flow/friction loss chart)
4. LI 6 X . 012 —
> +
(Length of Suct.Pipe) (Ft of head/1 ft of Pipe) (TDH Suct-Pipe)
5. I-k 15 X - 0 251 k -"r to
(Length of Return Pipe) (Ft of head/1 ft of Pipe) (TDH Return Pipe)
Flow and Friction Loss Per Foot TDH in Piping:
Schedule 40 PVC Pipe
Velocity—Feet Per Second — Filter loss in TDH (from filter data sheet):
Pipe Size 6 fp 8 fps 10 fps
ill 16gpm 0.14 21gpm 0.23' 26gpm 0-35' C
1.51, 37gpm 0.08' 50gpm 0,14' 62gpm 0.21' Heater loss in TDH (from heater data sheet):
2" 62gpm 0.06' 82gpm 0.10' 103gpm 0.16'
2.5" 88gpm 0.05' 117gpm 0.09' 146gpm 0.13' Total all other loss:
3" 138gpm 0.04' 181gpm 0.07' 227gpm 0.10'
4" 2 pm 0. ' , 313gpm 0.05' 392gpm 0.07'
6" 534gpm 0.02' 712gprn 1 0.03' 1 Total Simplified TDH:
Page 1 of 3
http:ltwww.flaglercounty.org/doctdpt/centprrnVbuild/headcalcswsl)ools3-09.1 Ara !AW.
Revised 7/2009
L LFI LL E C�0 P Y
Selected Pump and Main Drain Cover:
Pump selection ?64�1r �n;60 'i f-A- 0 \4rz't_ using pump curve for Simplified
(Purnp Model and Size in Horsepower)
TDH &System Flow Rate.
Main Drain CovelAa�iwf2�2f bol-oL�Vl Sle_' t')A-Y_�System Flow Rate must not
Y (Make and M6del)
exceed approved cover flow rate)
Notes: Minimum system flow based on min. flow per skimmer of 35 gpm.
DeterTnine the Number and Type of Required In-Floor Suction Outlets:
Check all that apply.
F7 @) 3'-0" 2 suction outlets @ gpm max. flow(see note 2).
4
F-1 @) @) @) 3 suction outlets @ gpm max. flow(see note 3).
Channel Drain@ 316upli. max. flow rate. tfyvt
Channel Drain @ 217 gpm w/2 ports&278 gpm wl 3 ports(see note 4).
Notes:
1. If a variable speed pump is used, use the max. pump flow in calculations.
2. For side wall drains, use appropriate side wall drain flow as published by manufacturer.
3. Insert manufacturers name and approved maximum flow.
4. See installation instructions for number of ports to be used.
5. In-Floor suction outlet cover/grate must conform to most recent edition of ASME/ANSI
Al 12.19.8 and be embossed with that edition approval.
6. Pump & Filter make, model and location cannot change without submitting a revised plan and
TDH worksheet.
Contractor Name Contractor Signature
CjP 6-1�e-;J S S 2— -z'
Contractor License Number Date
- C q 0�) 2-A 0 152A CIVAO- (P
Telephone Number Email Address
Page 2 of 3
hffp://www.flaglercounty.org/doeldpVcentprmtlbuild/headcalcsws-pools3-09.pdf
Revised 7/2009
lntelfflo"-� VS+SVRS
High Performance PUMP (Cont"d)
Keypad for IntelliFlo VS+SVRS
Dimensions and Performance*
120-
35—
30 100. @3450 rpm
25—
rpm
20
0 7 6 60--
L(qCD 2
_350 rpm
- 40
10-
20- n
rpm
0 r
00
So
rpm
0 .
0 20 40 60 so 100 120 140 160
U.S.Gallons per minute
5 10 is 20 25 30 35
Cubic Meters per hour
10 78 7 23.41
L 1-1-i
te
hot 12.50
Refer to catalog page 35 for a selection of 1-and-2-Pole GFCl
breakers which offer 6 milliamp personnel protection while
See page 477 for replacement parts.
meeting NEC 2008 Standards for Pool Pumps.
Page 16 Cartridge Pool Filters -CL and CV Series Filters
_Jandy-
...........
Section 10. Head Loss Curves
10.1 Jandy"'CL.and CV Cartridge Filter Design
Head Loss Curves
C L340 CV340
CL460 CV460
CL580 CV580
28
26
24 12
22
Design 20 10
Head 18 Design
Loss 16 Pressure
8
(ft head) 14 Drop
12 (psi)
10 6
8
6 4
4
2 2
0
0 30 60 90 120 150
Flow Rate (gpm)
SPECIAL NOTE ON CHANNEL DRAINS TO BUILDER, INSTALLER, PLAN CHECKER AND/OR INSPECTOR!
INSTALLATION LAYOUTS
A. See Fig.1-5 for installation layout with manufactured sump
B. See Fig.6-7 for installation layout without sump(Field-fabricated sump)
C. Requires Phillips screw driver. Hand tighten only.Do not use electrical or air drills.
D. [SPECIAL N USE ONLY PVCTO ABS(transitional glue)for cementing to ABS sump.Do not use fast set,clear,or
"hot"blue glues.
E. Measure from underside of high point of the cover to the top of pipe(s)to determine proper sump depth.
MANUFACTURED SUMP INSTALLATION (ONE,TWO, OR THREE PORTS)
L
IMPORTANT fig. 1
Single or multiple drain or pipe MANUFACTURED
use. SUMP INSTALLATION
Models:32CDFLxxx, (ONE,TWO,OR THREE PORTS)
32 CDAVxxx,32CDFLVxxx,
32CDAVVxxx,32CDAVACxxx,or
32CDLTxxx,32CDLTVxxx Z'OR 2-1t2-PIPE AV STYLE OR FLAT GRATE OPTIONAL SINGLE CONNECT10N
(AV=Anti-Vortex) (32CDAV) (32CDFL)
led INTERK>R-- OR HYDROSTATIC VALVE
At IAPMO(a nationally recogniz POOL FINISH
testing lab)All AquaStar Channel
Drains have been tested to 3"in
sump depth-field-fabricated or SUMP—,
manufactured.All AquaStar
Channel Drains are VGB 2008
0
compliant.
Plumbing to 1 or 2 pumps plus
skimmer equalizer are approved-
41- 7';
DO NOT exceed maximum flow Z
rate of outlet cover for total
- -----------
system. 1- 7 -1
j-------
1,2,or 3 pipe connections are o\
A 0 0 C)El_T
o
approved at any port or Of 0 LT _T 7
configuration under 0 0"
manufactured sump or field- EARTH- �-SHOTCRETE GUNITE
fabricated sump respectively.
ANY PLUMBING CONFIGURATION GRAVEL-
IS APPROVED BUT DO NOT
EXCEED MAXIMUM FLOW RATES OF COVER 2 SEPARATE PUMP SYSTEM CONNECTIONS--- 1 PUMP WITH 3"OR 4"TEE
OR PIPE(S)FLOW RATE(S)
WHICHEVER 6 LESSER
__ATION (SINGLE PORT PUMP INSTALLATION)
IMPORTANT fig.2
Single or multiple drain or pqpe MANUFACTURED
use. SUMP INSTALLATION
Models:32CDFL)om (SINGLE PORT I PUMP INSTALLATION)
32 CDAVx)m 32CDFLVxxv. AV STYLE OR FLAT GRATE
32CDAVVx)oe,32CDAVAC=r�or j-32COAV) �32CDFL)
32CDLTxxx,32CDLTVxxx P�LLPG POIRTS NOT BEING USED-, -OPTIONAL SINGLE CONNECTION OR HYDROSTATIC VALVE
(AV=Anti-Vortex) 0frOftOR FRAME MUD-RING
At IAPMO(a natkxuWy recDgrmz.-d POOL�VdSH
testing lab)All AquaStar Chamel
Drains have been tested to 3*in
sump depth-fiek"abirkated or
manufactured-All AquaStar
Channel Drains are VGB 2008
compliant
Plumbing to I or 2 purnps pkis
skimmer equalizer are approved-
DO NOT exceed maxb7wm flow
rate of outlet cover lbir total
E: E
System.
J
1,2,or 3 pipe connections are
approved at any port or SHOTCRETE I GUNITE
configuration unoder
manufactured sump or fieki- GRAVEL- TO PUMP
fabricated sump respecuvety.
ANY PLUMBING CONFIGUIPATION SINGLE N
��TCTION ON
ANY Of ZRIFEO S
IS APPROVED BUT DO t4OT I-I rZ'.2' 2-1 Q�,3"OR GREATER PIPE
EXCEED MAXIMUM FLOW RATES
OF COVER OR PIPE(S)FLOW RATE(S) For additional information on proper drain installation refer to The Association of Pool&Spa Professionals
-WHICHEVER IS LESSER AMSvAPSP-7 Standard and the US Consurriff Product Safety Commission Guidelines for Entrapment Hazard.
AQUASTAR-44
Pool products
CHANNEL DRAIN INSTALLATION INSTRUCTIONS
VGB SERIES
SUBMERGED, SUCTION,
SINGLE, UNBLOCKABLE OUTLET INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR
32CDFLxxx, 32CDFLFRxxx, 32CDFLVxxx, 32CDAVXXX, 32CDAVFRxxx, 32CDAVVXXX, 32CDLTxxx,
32CDLTFRxxx, 32CDLTVxxx, 32CDAVACxxx, 32CDBTxxx and 32CDBTFRxxx
(xxx = COLOR SUFFIX) O*Oft4O*,
MEETS OR EXCEEDS ASME/ANSI Al 12.19.8a-2008 #ASME %
VGB ANTI-ENTRAPMENT/ANTI VORTEX
2008 READ AND FOLLOW ALL INSTRUCTIONS �M2I:;o
V4 2007
----------
AWARNING!
IMPROPER INSTALLATION OR USE OF THIS PRODUCT MAY PRESENT A RISK OF HAIR OR BODY ENTRAPMENT AND
DROWNING. Install this equipment in accordance with the instructions provided. Use only with the components and
mounting hardware provided. PAILURE TO FOLLOW THESE INSTRUCTIONS AND/OR USE WITH COMPONENTS NOT
PROVIDED BYAQUASTAR POOL PRODUCTSAND INTENDEDTO BEUSEDWITHTHIS PRODUCT MAY RESULT IN IMPROPER
POSITIONING OR FUNCTIONING OF SUCTION OUTLET AND MAY CAUSE SEVERE PERSONAL INJURY OR DEATH.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
If not a single,unblockable outlet,in the event of one suction building/health authorities regarding single vs.multiple drain
outlet being completely blocked,the remaining suction outlets installations,etc.
serving the system shall have a flow rating capable of the full All sizes of connecting pipe are acceptable,pending velocity
flow of the Pump(s)or the specific suction system.If in doubt and GPM calculations.The larger the pipe,the better!(But do
about the rating and/or head loss curve of your system,consult not exceed maximum GPM ratings marked on top of cover
a qualified pool or spa professional and/or your respective or per installation instructions.)TAKE SPECIAL NOTE OF
equipment manufacturer(s).Also,double check with your local DIVERTER INSTALLATION ON PAGE 10.
Replace cover and screws wi hin 5 years.
WARNINGS AND IMPORTANT SAFETY PRECAUTIONS
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AN I D ALL
INSTRUCTIONS BEFORE USING THIS PRODUCT!
ADANGER SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT IS NOT INSTALLED AND
USED CORRECTLY.
IMPROPER INSTALLATION OR USE OF THIS PRODUCT MAY PRESENT A RISK OF HAIR OR BODY
ENTRAPMENT AND DROWNING. INSTALL THIS EQUIPMENT IN ACCORDANCE WITH THE
INSTRUCTIONS PROVIDED. USE ONLY WITH THE COMPONENTS AND MOUNTING HARDWARE PROVIDED.
FAILURE TO FOLLOW THESE INSTRUCTIONS AND/OR USE WITH COMPONENTS NOT PROVIDED BY AQUASTAR
POOL PRODUCTSO AND INTENDED TO BE USED WITH THIS PRODUCT MAY RESULT IN IMPROIpER
POSITIONING OR FUNCTIONING OF DRAIN COVER AND MAY CAUSE SEVERE PERSONAL INJURY OR DEATH.
P 877-768-2717 F 877-276-POOL info@aquastarpoolproducts.corn www.aquastarpooIproducts.com
WARNINGS AND IMPORTANT SAFETY PRECAUTIONS
LOICL
SUCTION ENTRAPMENT HAZARD
Pool and spa pumps produce high levels of suction, which can pose extreme danger if a person comes
in close proximity to an open pool or spa drain or if a drain cover is loose, cracked, broken or missing.
Pool and spa pumps move large volumes of water,which can pose extreme danger if a person's hair
comes in close proximity to a drain that is not the proper size for the pump or pumps'
Suction entrapment dangers include:
Hair Entancilement-When the hair tangles or knots in the drain cover,trapping the swimmer underwater,This
hazard is present when the flow rating of the cover is too small for the pump or pumps.
Limb Entrapment-When a limb is sucked or inserted into an opening resulting in a mechanical bind or swelling.
This hazard is present when a drain cover is missing,broken, loose,cracked or not properly secured.
Body Entrapment-When a portion of the body is held against the drain cover trapping the s6mmer underwater.
This hazard is present when the drain cover is missing, broken or the cover flow rating is not high enough for the
pump or pumps. A
Evisceration/Disem bowel ment-When a person sits on an open pool (particularly a child wading pool)or spa out-
let and suction is applied directly to the intestines,causing severe intestinal damage.This hazard is present when
the drain cover is missing, loosel"c racked,or not properly secured.
Mechanical Entrapment-When jewelry, swimsuit, hair decorations,finger,toe or knuckle is caught in an opening
of an outlet or drain cover.This hazard is present when the drain cover is missing, broken, loote,cracked,or not
properly secured.
Use these fittings only with a pumping system rated for the corresponding flow or less. FAILURE
TO DO SO CAN RESULT IN HAIR OR BODY ENTRAPMENT WHICH CAN CAUSE SEVERE PERSONAL
INJURY OR DEATH. If in doubt about the rating of your system,consult a qualified pool or spa professional.
IMPORTANT NOTICE
Regularly inspect all drain covers for cracks,damage and advanced weathering. If a drain cov6r
becomes loose,cracked,damaged, broken or is missing,close the pool or spa immediately, post a
notice and keep the pool or spa closed until an appropriate VGB 2008 certified drain cover is properly
installed.Drain covers deteriorate over time due to exposure to sunlight and pool chemicals.This
drain cover must be replaced within five(5)years from installation (or earlier if the cover becomes
damaged in any way).
An ANSI/ASME Al 12.19.8 approved anti-entrapment drain cover must be used for
each drain, If a drain cover becomes loose, broken or is missing,close the pool or spa immedi-
ately and shut off the pump until an approved anti-entrapment drain cover is properly install i ed with the supplied
stainless steel screws.Only the supplied 316 stainless-steel screws should be used with the drain cover.Substitute
screws such as masonry screws,sheet rock screws or other types of screws should never be used.Screws put into
the frame anywhere except in the original screw hoIes will not hold and will allow the drain cover to come off the
main drain,causing an entrapment hazard, including possible limb and body entrapment or evisceration/disem-
bowelment.If the screw holes of the frame are stripped or the brass inserts are missing, loose,or damaged, replace
the frame.DO NOT DRILL NEW SCREW HOLES IN THE FRAME AS THIS WILL DAMAGE AND WEAKEN THE FRAME.
P877-768-2717 F877-276-POOL info@aquastarpoolproducts.com www.aquastarpoolproducts.com
WWI ilk
en IMPORTANT NOTICE
Attention Installer:This manual contains important information about the installation, operation and safe
use of this product.This information should be given to the owner and/or operator of this equipment.
You may also refer to www.aquastarpoolproducts.com for all warnings and instruc'tions related to the 32"
Channel Drains.
Before installing this product, read and follow all warning notices and instructions which
are included. Failure to follow safety warnings and instructions can result in severe injury,
death, or property damage. Call (877) 768-2717 or visit our website at www.aguastarpoolproducts.com for
additional free copies of these instructions. It is absolutely critical that the suction plumbing be installed in
accordance with the latest national and local codes for swimming pools.
A pool/spa Pump produces high levels of suction, which can po'
se extreme danger if a
cover or grate.— person comes in close proximity to an open pool or spa drain or a loose or broken drain
Hydrostatic relief valve
For installations utilizing a hy&ostatic relief valve, using a collector tube will maintain a clear path to the
hydrostatic valve.At least one hydrostatic relief valve in a set of suction outlets will allow hydrostatic uplift
pressure caused by ground water to be relieved into the pool or spa.
Entrapment Avoidance Notice:
The covers used on suction outlets should be approved and listed as conforming to the currently
published edition of ANSI/ASME Al 12.19.8 Standard.These covers should be inspected regularly and replaced if
cracked,broken or older than the design lifetime indicated on them by the manufacturer.The maximum possible
flow rate of the pump should be less than or equal to the maximum approved flow rate indicated on the suction
outlet cover by the manufacturer.THE USE OF UNAPPROVED COVERS OR ALLOWING USE OF THE POOL OR SPA
WHEN COVERS ARE MISSING,CRACKED OR BROKEN CAN RESULT IN BODY OR LIMB ENTRA9MENT, HAIR ENTANGLE-
MENT,EVISCERATION AND DEATH.
PUMPS improperly sized or installed or used in applications other than for which the
pump was intended can result in severe personal injury or death.These risks may
include but not be limited to electric shock,fire,flooding, suction entrapment or severe injury or property
damage caused by a structural failure of the pump or other system component
The use of alcohol,drugs,or medication can greatly increase the Osk of fatal
hyperthermia in hot tubs and spas.
To reduce the risk of injury,do not permit children to use d*product unless they are
closely supervised at all times.
When setting up pool water turnovers or flow rates the operator must consider local
codes governing turnover as well as disinfectant feed ratios.
DO NOT increase pump size;this will increase the flow rate through the system and
exceed the maximum flow rate stated on the drain cover.
P877-768-2717 F877-276-POOL infogaouastarDooloroducts-rom
WARNINGS AND IMPORTANT SAFETY PRECAUTIONS
Most states and local codes regulate the construction, installation,and operation of public pools
and spas, and the construction of residential pools and spas. it is important to comply with these
codes, many of which directly regulate the installation and use of this product.Consult the local building and health
codes for more information.
•All types of suction fittings shall not be located on seating areas or on the back rests for such seating areas.
•An approved anti-entrapment suction outlet cover must be used for each drain.
•Never exceed the maximum flow rate stated on the drain cover.
• Regularly inspect drain covers for cracks and signs of advanced weathering.
•Close the pool or spa if any suction outlet component is loose,cracked, broken, missing or not
securely attached. Replace loose,cracked,damaged,broken or missing drain covers.
•Install in accordance with the latest APSP standards and CPSC guidelines,follow all applicable national,
state and local codes.
***If you have any questions about installation or maintenance of this drain cover, please contact your pool
professional. Never attempt to alter or repair the cover or frame on your own.***
i r- - —
VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT
The Virginia Graeme Baker Pool and �pa Safety Act raises certain new requirements on owners and
operators of swimming pools and spas.
Pools or spas constructed on or 'after December 19,2008,shall utilize:
(A) No submerged suction outlets,a gravity drainage system 'with ASME/ANSI cover(s),one or more
unblockable outlets�or
(13) A multiple main drain system without isolation capability with suction outlet covers that meet
ASME/ANSI Al 12.19.8 Suction Fittings for Use in Swimming Pools,Wading Pools,Spas,and
HotTubs and either:
(i) A safety vacuum release system (SVRS) meeting ASME/ANSI Al 12.19.17 Manufactured
Safety Vacuum Release Systems(SVRS)for Residential and Commercial Swimming Pool,
Spa, Hot Tub,and Wading Pool Suction Systems and/or ASTM F2387 Standard Specification
for Manufactured Safety Vacuum Release Systems(SVRS)for Swimming Pools,Spas and
Hot Tubs or
(ii) A properly designed and tested suction-limiting vent system or
(iii)An automatic pump shut-off system.
Pools and spas construction prior to December 19,2008,with a single submerged suction outlet shall use a
suction outlet cover that meets ASME/ANSI Al 12.19.8 and either:
(A)A multiple main drain system without isolation capability,or a single (VGB 2008 compliant) unblockable
or
(13)A safety vacuum release system (SVRS) meeting ASME/ANSI Al 12.19.17 and/or ASTM F2387,or
(C)A properly designed and tested suction-limiting vent system,or
(D)An automatic pump shut-off system,or
(E) Disabled submerged outlets,or
(F)Suction outlets shall be reconfigured into return inlets.
For more information about the Virginia Graeme Baker Pool and Spa Safety Act, contact the Consumer
Product Safety Commission at (301) 504-7908 or visit www.cpsc.gov.
NOTE:Always turn off all power to the pool pump before installing the cover or working on any suction
outlet.
- ------ P 877-768-2717 F 877-276-POOL info@aquastmpoolproducts.com www.aquastarpool�roducts.com
ACTS CODES AND STANDARDS
*Important Acts Codes and Standards Information*
All AquaStar suction outlet fittings (drain covers)are federally regulated by the U.S.Consumer Product Safety
Commission (CPSC).This authority was given to the CPCS in 2007 as part of the Virginia Graeme Baker Pool and Spa
Safety Act.Visit www.cpsc.org for more information.
ASME/ANSI Al 12.19.8-2007 Certification
All AquaStar suction outlets are certified by IAPMO in accordance with ASME/ANSI Al 12.19.8-N07 and/or ASME/
ANSI Al 12.19.8a-2008 Suction Fitting for Use in Swimming Pools,Wading Pools,Spas,and HotTubs.To download a
current copy of the IAPMO certification,go to http://www.IAPMORT.org.
NSF/ANSI-50
All AquaStar suction outlets are certified to comply with NSF/ANSI 50 Circulation system components and related
materials for swimming pools, spas/hot tubs.To download a current copy of the IAPMO certification,go to
http://www.IAPMORT.org
Virginia Graeme Baker Pool and Spa Safety Act
All AquaStar suction outlets comply with the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(b). This
section requires all suction outlet fittings(drain covers)to conform to ASME/ANSI Al 12.19.8-2007 and/or ASME/ANSI
Al 12.19.8a-2008.
International Code Cou
AquaStar is an approved component as required by the International Code Council (ICC) building codes,which
include the International Residential Code(IRC),and the International Building Code (IBC),collectively know as the
iCocles.The ICC updates the iCod.es every three years.For more information,visit www.iccsafeorg.
International Residential Code ORQ
Many states and local jurisdictions have adopted the IRC, including Appendix G. Section AG1 06 addresses Suction
Entrapment Avoidance requirements that regutate residential swimming pools and spas. It is important to know if
these codes are in affect where the resklential pool or spa is being built and which version is being required.Effective
in the 2009 version of the IRC is the requirement to build in accordance with ANSI/APSP 7-2006 American National
Standard for Suction Entrapment Avoidance in Swimming Pools,Wading Pools,Spas,Hot Tubs,and Catch Basins.
2003 and 2006 versions do not include a reference to the ANSI/APSP 7 standard. Visit www.iccsafe.org for more
information.
International Building Code(00
Many states and local jurisdictilions haw adopted the International Building Code which regulates commercial
building projects,induding pubk swimming pools and spas.Section 3109-5 addresses Suction Entrapment
Avoidance requirements that regulate puitillic swimming pools and spas.It is important to know if these codes
are in affect where the public pool or spa is being built and which version is being required.Effective in the
2009 version of the IBC is the reclukemenit to build in accordance with ANSIJAPSP 7-2006 American Nationial
Standard for Suction Entrapmem Avoidance in Swimming Pools,Wading Poolls,Spas,Hot Tubs,and Catch
Basins.2003 and 2006 versions do not kxJude a reference to the ANSI/APSP 7 standard.VsitwwvvJccsa*--0r9 for
more information.
ANSI/APSP-7 Suction EnIgpfflgint Avoidaince Standard
The Association of Pool and Spa prokmakxmils publishes many swimming pool and spa reLited standards,
including ANSI/APSP 7-2006 American NaCkmal Standard for Suction Entrapment Avoidance in Swimrniing POOK
equovd by some
Wading Pools,Spas,Hot Tubs,and Catch Basins.ANSI/APSP 7 is referenced by the Kodes.and is r
states and local jurisdictions.ft recIuires al sucbon outlet fittings (drain covers)to be tested aind Listed by a nationalty
recognized testing laboratory as conforming to most recent version of ASME/ANSI Al 12-19,&Visit vvww,1PqxJN9 for
more information.
Hydraulic System Specifications
POOL PUMP SUCTION REQUIREMENTS
Pump suction is hazardous and can trap and drown or disembowel bathers. Do not use or allow anyone else to
use a pool, spa, or hot tub unless it has at least two (2) suction outlets, or an approved single, unblockable
suction outlet, to each pump suction line. Do not use or operate swimming pools, spAs,or hot tubs if a suction
outlet cover is missing, broken, or loose.
Entrapment Protection
The pump suction system must provide protection against the hazard of suction entrapment or hair
entrapment/entanglement.
Suction Outlet Covers
All suction outlet covers must be maintained.They must be replaced if cracked, broken,or missing. See page
(5)for outlet cover certification requirements.All suction outlets must have correctly installed, screw-fastened
covers in place.
WATER VELOCITY AND FLOW RATES
The maximum water velocity through drain covers is limited by some local regulations,for example some stat,
health departments limit the velocity through public pool drain covers to 1-1/2 feet per second.This velocity
limit is lower than the flow rating provided by the ASME Al 12.19.8 certification,therefore local limit applies
and must be followed. Never exceed the flow rating listed on the cover even if local code does not provide a
velocity limit.
PIPING-GENERAL
For new installations,the piping between drains must be sized to limit the velocity to six(6) feet per second.
This limit applies to the branch piping and all fittings between multiple outlets and the tee leading back to th
pump. If code requires a lower water velocity, comply with the code. See Chart I for information on pipe size
flow ratings at six(6) feet per second.
ACCEPTABLE PIPE SIZE FOP JM RECOMMENDED SYSTEM
FLOW RATE PER APSP-_. �-_�c inch the Branch Line)
Pipe Size 11/2" 2" 21/2" 3"
Flow Rate in GPM 45 80 110 160
ALL MODELS LISTED BELOW ANTI-ENTRAPMENT/ANTI-VORTEX AND FOR SINGLE OR MULTIPLE USE
MAX FLOW RATES(PER OUTL. _-TING POSITIONS(xxx=COLOR SUFFIX)
11 Model 32CDFLxxx(and 32CDAVxxx(arvd TOTAL OPEN 32CDBTxxx, TOTAL OPEN
32CDFLFRxxx,32CDFLVxxx, 32CDAVFRxxx,32CDAVVxxx, AREA 32CDBTFRxxx AREA
32CDLTxxx) 32CDAVAC)=�
fps 32.4
25.9 120 GPM @ 1.19
Floor 316 GPM @ 3.9 fps 236 GPM @ 3.4 fpS
-4-
N.A.
F-W--a-1 F-Ti 208 GPM @ 2.6 fps i 136 GPM I-9fos 22.6 N.A.
P 977-768-2717 F 877-276-POOL info@aquasL3rpoolproducts.com www.aquastaipoolproducts.com
C4 of Atlantic Beach APPLICATION NUMBER
Building Department/ (To be assigned by the Building Department.)
800 Seminole Road
12
antic Beach, Florida 32233-5445 �f -
Phone(904)247-5826 - Fax(0*247-584d
Date ro Z_
E-mail: building-dept@coab.us uted:
City web-site: hftp://www.coab.us
APPLICATION REVIEW A D TRACKING FORM
Property Address: pApaft
_ment review required Yes No
4'Buil bl;2_
Applicant: :4�L6 Y, S7-ille,--, 151anning &Zo�Bi
Tr—ee ministrator
Project: bILC�Wo
1�6�ic ti i�ie
Public Safety
Fire Services
Other Agency Review or Permit Required Review or Receipt Date
Florida Dept. of Environmental Protection of Permit Verified By
Florida Dept.of Transportation
St.Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPLICATION STATUS
Reviewing Department First Review: EjApproved. KDenied.
(Circle one.) Comments: ou P"4- ov,_v,e
BUILDING '�Ebk.'Oks 6P 0�.'W!
PLANNING &ZONING
Reviewed by: Date:
TREE ADMIN.
Second Review: %pproved as revised. []Denied.
PUBLIC WORKS Commenr �Crr v!� 4KO:p
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:-Ql)/2—
FIRE SERVICES Third Review: EjApproved as revised. RDeniec(
Comments:
Reviewed by: Date:
Revised 07127110
City of Atlantic Beach APPLICATION NUMBER
Building Department
(To be assigned by the Building Department.)
800 Seminole Road
-972-
antic Beach, Florida 32233-5445 12
Phone(904)247-5826 - Fax(904)247-5845
rVA E-mail: building-dept@coab.us Date routed: Z_
,I I -
City web-site: hftp://www.coab.us
APPLICATION REVIEW AND TRACKING FORM
Property Address: S66 Z Td Qapar
ew, _tment review required Yes No
Buil
Applicant: -yv. 7,1(-Ilk, 151anning &Zonio-O
Treg-Administrator
"PubLc -dup
Project: _Wo
,!�?�ic �=e
Public Safety
Fire Services
Other Agency Review or Permit Required Review or Receipt Date
of Permit Verified By
Florida Dept. of Environmental Protection
Florida Dept.of Transportation
St.Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPLICATION STATUS
Reviewing Department First Review: Approved. [-]Denied.
(Circle one.) Comments:
BUILDING
PLANNING &ZONING Reviewed by:'', &�2L Date:1-c-��-Z-2—
TREE AJDMIN
Second Review: F�Approved as revised. []Denied.
Comments:
ORK
L UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: E]Approved as revised. []Denied.
Comments:
Reviewed by: Date:
Revised 07127110
City of Atlantic Beach APPLICATION NUMBER
Building Department (To be assigned by the Building Department.)
800 Seminole Road
Atlantic Beach, Florida 32233-5445 12 -272-
Phone(904)247-5826 - Fax(904)247-5845
E-mail: building-dept@coab.us Date routed: Z_
City web-site: hftp:/twww.coab.us I - , 'A
APPLICATION REVIEW AND TRACKING FORM
'<P / -
Property Address: QepaLtment review required Yes No
Build'
Applicant: _?&416 Yv J7_illk, 15-lanning &
Tree ministrator
Project: eAublic W
Ic ti 1 12
Public Safety
Fire Services
----------
Other Agency Review or Permit Required Review or Receipt Date
of Permit Verified By
Florida Dept.of Environmental Protection
Florida Dept.of Transportation
St.Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPUdATION STATUS
Reviewing Department First Review: YApproved. FlDenled.
(Circle one.) Comments:
BUILDING
PLANNING &ZONING Reviewed by: to. Datel–�— 1"
TREE ADMIN.
Second Review: E]Approved as revised. MDenied.
PUBLIC WORKS Comments:
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: DApproved as revised. F]Denied.
Comments:
Reviewed by: Date:
Revised 07/27110
City of Atlantic Beach APPLICATION NUMBER
Building Department (To be assigned by the Building Department.)
800 Seminole Road
Atlantic Beach, Florida 32233-5445 12 -27Z�
Phone(904)247-5826 - Fax(904)247-5845
E-mail: building-dept@coab.us Date routed: Z_
City web-site: hftp://www.coab.us
APPLICATION REVIEW AND TRACKING FORM
Property Address: 966 —
_Pigaoment review required Yes Ao
BL
gi�ld�'
J7-i IIA-, 0
Applicant: <:151anning &Z ni6g
Tr!egAgp]�,n,strator
Project: &&Iic WorksP
�icti i ie
Public Safety
-7 -
Fire Services
Other Agency Review or Permit Required Review or Receipt Date
of Permit Verified By
Florida Dept. of Environmental Protection
Florida Dept. of Transportation
St. Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPLICATION STATUS
Reviewing Department First Review: 0?rApproved. F�Denied.
(Circle one.) Comments:
(2��D
PLANNING &ZONING Reviewed by: Date:
TREE ADMIN. Second Review: [-]Approved as revised. Fbeni(/d.
PUBLIC WORKS Comments:
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: F]Approved as revised. MDenied.
Comments:
Reviewed by: Date:
Revised 07/27110
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
INSPECTION PHONE LINE 247-5814
Page 2
Application Number . . . . . 12-00000372 Date 6/08/12
----------------------------------------------------------------------------
Fee summary Charged Paid Credited Due
----------------- ---------- ---------- ---------- ----------
Permit Fee Total 200 . 00 200 . 00 . 00 . 00
Plan Check Total 100 . 00 100 . 00 . 00 . 00
Other Fee Total 31 . 00 31 . 00 . 00 . 00
Grand Total 331 . 00 331 . 00 . 00 . 00
PERMIT IS APPROVED ONLY IN ACCORDANCE WITH ALL CITY OF ATLANTIC BEACH ORDINANCES AND THE FLORIDA
BUILDING CODES.