Loading...
2233 SEMINOLE RD #7 ROOF PERMIT ,,:s--•>>`ir,J City of Atlantic Beach APPLICATION NUMBER '. Building Department (To be assigned by the Building Department.) tv, 800 Seminole Road • „r Atlantic Beach, Florida 32233-5445 G -Rood`-1 Z v Phone(904)247-5826 • Fax(904)247-5845 / / '- o;osj. E-mail: building-dept@coab.us Date routed: 60/`9,1 (47 City web-site: http://www.coab.us bbb APPLICATION REVIEW AND TRACKING FORM Property Address: Z2, 3 SFfin.u..)oce Department review required Yes No uilding Applicant: 14W C -TIi:\a4 Hing Tree Administrator Project: L kC Ll ke f?co Public Works Public Utilities Public Safety Fire Services Review fee $ Dept Signature Other Agency Review or Permit Required Review or Receipt Date of Permit Verified By Florida Dept. of Environmental Protection Florida Dept. of Transportation St.Johns River Water Management District Army Corps of Engineers Division of Hotels and Restaurants Division of Alcoholic Beverages and Tobacco Other: APPLICATION STATUS Reviewing Department First Review: ❑Approved. pied. (Circle one.) Comments: Z26. +A4E-14 — (E.NA& 6 12 BUILDING PLANNING &ZONING Reviewed by:4 Date: 61 t t fi 65 TREE ADMIN. Second Review: pproved as revised. ❑Denied. PUBLIC WORKS Comments: PUBLIC UTILITIES PUBLIC SAFETY Reviewed by: Date: A241. FIRE SERVICES Third Review: QApproved as revised. ❑Denied. Comments: Reviewed by: Date: Revised 05/14/09 tlt , " , CITY OF ATLANTIC BEACH hit "s) 800 SEMINOLE ROAD 7.5 f , - ATLANTIC BEACH,FL 32233 (904) 247-5800 BUILDING DEPARTMENT REVIEW COMMENTS Date: 6/21/16 Permit#: 16-ROOF-1328 Applicant: Caleb Wagner Site Address: 2233 Seminole Rd. Address: 110 Cumberland Park Dr. Review: _ 1 Phone: 338-4581 RE#: Email: cwagner@hwcontracting.net THIS BUILDING DEPARTMENT REVIEW IS ONE OF 1 DEPARTMENT REVIEWS. PLEASE FIND ALL DEPARTMENT REVIEWS AND ADDRESS ALL COMMENTS. Correction Comments: Application is disapproved for the following issues: 1. The new flat roof must comply with current Code. Please provide the following: Flat Roofs. (Less than 2:12) 1. Florida Product Approval Numbers for all roofing materials, underlayment, and accessories. a. Product Approval Numbers must have decimal places (e.g. xxxx.xx) b. If Product Approval Number covers more than one product, the actual proposed product must be indicated. 2. Please provide the Manufacturer's Installation Instructions for specific product, including attachment of base sheets, insulation, and re-cover boards. 3. Area and slope of new roofing, and Wind Exposure Category. (B, C, or D) 4. Please verify that the existing roof will not allow water to pond. 1 P BUILDING PERMIT APPLICATION CITY OF ATLANTIC BEACH 800 Seminole Road,Atlantic Beach,FL 32233 � Office(904)247-5826 Fax(904)247-5845 I — 1\OO — I 3 Z E5 Job Address:2233 Seminole Road Unit 7,Atlantic Beach,FL 32233 Permit Number: Legal Description 09-2S-29E OCEAN VILLAGE ONE-CONDOMINIUMDWELLING UNIT 7 0/R 3 Parcel# Floor Area of Sy.Ft. Stilt Valuation of Work$ 12,617.73 Proposed Work heated/cooled non-heated/cooled X Class of Work(circle one): New Addition Alteration 411110 Move Demolition pool/spa window/door Use of existing/proposed structure(s)(circle one): Commercial esi ienti If an existing structure,is a fire sprinkler system installed?(Circle one): Yes ® N/A Florida Product Approval# For ioltlple products use product approval form Describe in detail the type of work to be performed:Remove flat roof deck and rebuild new deck like existing Ltk -cor (eke Property Owner Information: Name: Steve Surratt Address:2233 Seminole Road Unit 7,Florida 32233 City Atlantic Beach State FL Tp 32233 Phone 904-982-5550 E-Mail or Fax#(Optional) Contractor Information: (j Company Name:HW Contracting Qualifying Agent:Caleb Wagner C <0 99 Z` CC C iM J J 05-n q/1 Address: 110 Cumberland Park Dr.STE 303 City:Saint Augustine State FL Zip 32095 Office Phone 904-338-4581 Job Site/Contact Number SAME Fax#C.440k a'sITRA 1 State Certification/Registration# CGC 1519928 CC 1330691 Architect Name&Phone# Engineer's Name&Phone# Ay r4 Simple Title Holder Name and Address Bonding Company Name and Address Mortgage Lender Name and Address Application is hereby made to obtain a permit to do the work and installations as indicated. /certify that no work or installation has commenced prior to the issuance oja permit and that all work will be performed to meet the standards of all laws regulating construction in this jurisdiction. This permit becomes null and void if work is not commenced within six(6 j months,or ij construction or work is suspended or abandoned fora_penod of siz 6)months at any time a ter work is commence; 1 understand that separate permits must be secured for Electrical Work,Plumbing,Sign,Wells,Pools,l�rrnaces,Boilers,N rs, Tanks and Air Conditioners,etc. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY.IF YOU INTEND TO OBTAIN FINANCING CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT. I hereby certify that!have read and esamined this gsrplication and know the same to be true and correct. All provisions of laws and ordinances governing this type of work will be complied with whether specified herein or not. The granting of a permit does not presume to give• • • • . cancel the -- provisions of any other federal,state,or local law regulating construction or the performance of constructit°on. Signature of Owner Signature of Con• .' Print Name /e,26e,r1- � -511>-/141.11-- Print N: 1 ,1F _._ _S.7t '_► Sworn to and subscribed before me Sw �s su •` me this/viof _ .L. this _ e y of '��ir a it 1111 Notary Public ► `otary ' • c Revised 0 .26.10 FELICIA D. CURTR!_GHT :i...„Y: •••, TONI GINDLESPERGER Notary Public,State; 11.44+:0.77 © E a., r, t 1., MY E V :1 EXPIRy Underwriters Commission No. FF Z ' P . sar,r 1 JUN 9 2016 -- I --J 4 Nir s\ CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD ' 3 t, ) ATLANTIC BEACH, FL 32233 INSPECTION PHONE LINE 247-5814 JiJ,;l9f' ROOF PERMIT MUST CALL BY 4PM FOR NEXT DAY INSPECTION: 247-5814 JOB INFORMATION: Job ID: 16-ROOF-1328 Job Type: ROOF PERMIT Description: RE-ROOF , LIKE FOR LIKE FLAT ROOF Estimated Value: $12.617.00 Issue Date: 6/24/2016 Expiration Date: 12/21/2016 PROPERTY ADDRESS: Address: 2233 SEMINOLE RD UNIT 007 RE Number: 169519-0114 PROPERTY OWNER: Name: SURRATT, ROBERT S Address: 7006 WENSLEY WAY GENERAL CONTRACTOR INFORMATION: Name: HW CONTRACTING Address: 110 Cumberland Park Dr# 303 ST # 303 Phone: - - FEES: STATE DCA SURCHARGE $2.00 STATE DBPR SURCHARGE $2.00 BUILDING PERMIT FEE $113.09 PLAN CHECK FEES $56.54 Total Payments: $173.63 PERMIT IS APPROVED ONLY IN ACCORDANCE WITH ALL CITY OF ATLANTIC BEACII ORDINANCES AND THE FLORIDA BUILDING CODES. Certaini ed Technical Product Data s�iNr��oe.�ir. Commercial Roofing FLINTLASTIC® SA PLYBASE SELF-ADHERING SBS MODIFIED BITUMEN PLYBASE FOR SA ROOF SYSTEMS Product Product Use: Flintlastic SA PlyBase is designed for use as a base ply or inter ply in Information self-adhering roofing systems. It is suitable for use in the construction of various types of membranes for both new construction and reroofing over a variety of substrates without fasteners. Limitations:When using Flintlastic SA PlyBase, pay particular attention to storage and handling, deck preparation, slope and drainage, and application requirements to assure a successful installation and long-term performance. Product Composition and Features: Flintlastic SA PlyBase is manufactured on an extra strength fiberglass reinforced mat that receives a coating of modified bitumen compound on the top of the sheet and a self-adhering modified bitumen compound on the back of the sheet. The top surface contains a permanent blue film that must not be removed. The back surface is finished with a removable release film. Roll Dimensions: 39%' x 64' 6" Nominal Coverage: Two squares Approximate Weight: 86 lbs. Top Surface: Permanent film Bottom Surface: Removable release film Applicable Standards: Meets ASTM D4601, Type II; D1970 and CGSB 37 GP-56M Type 2a, Class C. Grade 1. Flintlastic SA PlyBase is approved by Underwriters Laboratories for use in various Class A. B and C roof assemblies, Factory Mutual, Miami-Dade. Florida Building Code Statewide Approval (FL 2533 and FL 16709) and Texas Department of Insurance (RC-47). Technical The following information represents typical average properties of Flintlastic SA PlyBase. Data Support Mat:Extra strength fiberglass reinforced mat. Test Description Test Method Results* Thickness: ASTM D5147 1.5 mm(60 mils) Tensile Strength: ASTM D5147 @ 73°F MD/XD 65/40 lbs./in. Elongation: ASTM D5147 @ 73°F MD/XD 6.0%/5.0% Packaging: Individual cartons(20 rolls per pallet) `NOTE:Published results are nominal production values confirmed by independent laboratory testing. 1 (,t-1 L I (s 147 -6 t- -) -A-7-7A 3r .) - Iel f .. I�ST��L►� I, �(.b-bA$� bysiL '1-141 6 O c K (-3? Itf 6-r y -ro 'T�-F=-�V`1 W 6;51)), �2t �fQ�I�TIN rtU IS 14S ,a ?J aIv N A i L47)t.�E. 5 &t—t.5-11/..frit- MADE t35fi 'st-MADE IN --_-_-U.S.A. Installation Deck Preparation:CertainTeed recommends the use of Flintlastic®SA NailBase in conjunction with all self-adhering membrane roof installations on nailable substrates. Non-nailable roof decks may receive direct application of Flintlastic SA PlyBase or Flintlastic®SA MidPly followed by Flintlastic®SA Cap, provided the deck is thoroughly primed using FlintPrime° SA. It should be noted that without the use of a nailable base sheet,the membrane may be difficult to remove if removal is ever warranted and certain UL listings for the product may not apply. Product Non-Nailable Substrates:Prime non-nailable substrates such as concrete using FlintPrime SA Application at the rate of.20 to .25 gals/square. Allow primer to dry, maximum 4 hours. Apply Flintlastic SA PlyBase directly to the primed surface. Overlap base sheet side laps 2"and end laps 6". Always start membrane application at the low point of the roof and install all plies so that no laps are against the flow of water. Offset end laps minimum 36". Once positioned, fold back the membrane halfway lengthwise and remove the release film, then ease back into place. Or lift the end of the membrane and pull the split release film out as you walk the length of the membrane. Repeat release-film removal procedure with other side of membrane. Cut opposing corners of end laps diagonally to minimize'T"seam joints and seal using FlintBond® SBS modified bitumen adhesive, trowel or caulk grade. Use a heavy,weighted roller to smooth and secure the membrane. Apply a bead of FlintBond adhesive to side and end laps. Permanent top surface film is left in place. Precautions Do not attempt application if ice, snow, moisture or dew are present. Surface to be bonded to must be clean, dry and free from any dust or deterrent to adhesion.Ambient temperature must be 50°F or above. Do not attempt installation on roofs without adequate slope and drainage. Storage and FlintlasticSA rolls must be stored above ground indoors and protected from the elements. Handling Rolls that are improperly stored or have been on hand for prolonged periods of time may lose their tack. Do not attempt to install rolls that do not exhibit an adequate bond. Warranties CertainTeed offers Limited (product only)and No Dollar Limit(NDL, product and workmanship)warranties. Warranty type and duration is dependent on roof system configuration and contractor selection. Only CertainTeed Gold and Silver Star Contractors are eligible to apply for NDL warranties on specific roof projects. For more information, see CertainTeed Commercial Roof Systems Specifications or contact Commercial Roofing Technical Services. Technical CertainTeed provides technical assistance in the design, selection, specification and Assistance and application guidelines for all CertainTeed Commercial Systems. Architectural and field Services representatives are available for consultation within each region. For more information,contact CertainTeed Commercial Roofing Technical Services at 800-396-8134 x2. ASK ABOUT ALL OF OUR OTHER CERTAINTEED PRODUCTS AND SYSTEMS: CertainTeed Corporation 20 Moores Road ROOFING • SIDING • TRIM • DECKING • RAILING • FENCE Malvern, PA 19355 GYPSUM • CEILINGS • INSULATION Professional: 800-233-8990 www.certainteed.com http://blog.certainteed.com Consumer: 800-782-8777 03/16 CertainTeed Corporation,Printed In U.S.A.the Code No. the .S67 SAINT GOBAIN CertainTeed SAINT G 08 4.IN Technical Product Data Commercial Roofing mLEARN MORE AT energystar.govov FLINTLASTICv SA CAP SELF-ADHERING SBS MODIFIED BITUMEN CAP SHEET FOR SA ROOF SYSTEMS Product Product Use: Flintlastic"SA Cap is designed for use as a cap membrane in multi-ply self- Information adhered systems. It is suitable for use in the construction of various roof membrane assemblies over a variety of substrates. It is intended for use over Flintlastic SA NailBase, Flintlastic' SA PlyBase or Flintlastic' SA MidPly. Product Composition and Features: Flintlastic SA Cap is manufactured using a high performance, stress-resistant polyester mat impregnated and coated with a superior grade of modified bitumen compound. It is surfaced on the bottom with a removable release film and on the top with mineral granules. The combination mat provides excellent tear and puncture resistance. Roll Dimensions: 39%' x 32' 11" Nominal Coverage: One square Approximate Weight: 95 lbs. Top Surface: Mineral granules Back Surface: Removable release film Packaging: Individual cartons (20 rolls per pallet) Applicable Standards: Meets ASTM D6164, Grade G, Type I, D7505 and CGSB 37 GP-56M Type 1a, Class A, Grade 1, ICC-ES (ESR-1388), Miami-Dade, Florida ^� Buildng Code Statewide Approval (FL 2533 and FL 16709) and Texas Department CR C of Insurance (RC-47). Flintlastic SA Cap White is an approved ENERGY STAR product for slopes greater than 2"/12". Initial Solar Reflectance: 0.27; Aged Solar Reflectance: 0.24; Thermal Emittance: 0.89. Flintlastic SA Cap White is also listed by the Cool Roof Rating Council (CRRC). The CRRC product code ID is 0668-0018. Technical Modified Bitumen Coating: Non-oxidized (flux) asphalt, blended with elastomeric Data styrene-butadiene-styrene (SBS) polymer. Support Mat:High performance, stress-resistant polyester mat. Test Description Test Method Results` Solar Reflectance Index(SRI): ASTM E1980 28.0 Tensile Strength: ASTM D5147 @ 73.4+/-3.6°F MD/XD 80/55 lbs./in. @ 0+/-3.6°F MD/XD 115/90 Ibs.fin. Elongation: ASTM D5147 @ 73.4+/-3.6°F MD/XD 60%/65% @ 0+/-3.6°F MD/XD 40%/40% Dimensional Stability: ASTM D5147 0.5% Low Temperature Flex: ASTM D5147 Pass @ O F Thickness: ASTM D5147 4.0 mm(160 mils) Tear Strength: @ 73.4+l-3.6T MD/XD 110/80 lbs. *NOTE:Published results are nominal production values confirmed by independent laboratory testing. MADE IN U.S.A. Product Installation:Apply to Flintlastic SA NailBase, Flintlastic PlyBase and/or Flintlastic SA MidPly Application working with lengths of membrane appropriate for proper handling and the same installation procedure as described for Flintlastic SA MidPly. Overlap side laps 3"and end laps 6". Selvage edge with release strip is provided on Flintlastic SA Cap; position roll with selvage edge at the high side of the roof. Once the first cap sheet membrane length is in place, remove the top side lap to release film before overlapping the second length of Flintlastic SA Cap. Stagger side laps of Flintlastic SA Cap a minimum of 18"from those of the underlying Flintlastic SA MidPly and be certain end laps also are staggered minimum 36". At end laps (or any overlap onto mineral surface), use trowel grade FlintBond®modified bitumen adhesive uniformly in a 1/,r;"to %" layer wherever an overlap exists to ensure an adequate bond. Cut opposing corners of end laps diagonally to avoid"T"seam joints. Use a heavy,weighted roller to smooth and secure the membrane. Deck Preparation:CertainTeed recommends the use of Flintlastic SA NailBase in conjunction with all self-adhering membrane roof installations on nailable substrates. Non-nailable roof decks may receive direct application of Flintlastic SA PlyBase or Flintlastic SA MidPly followed by Flintlastic SA Cap, provided the deck is thoroughly primed using FlintPrime SA. It should be noted that without the use of a nailable base sheet, the membrane may be difficult to remove if removal is ever warranted and certain UL listings for the product may not apply. Precautions:Flintlastic SA Cap must be applied as part of a self-adhered system. It is not intended for use with hot asphalt, cold adhesives or torch-down applications. Roof decks must be structurally sound, dry and smooth, and meet or exceed minimum requirements of the deck manufacturer, local code and CertainTeed. Don't attempt application if ice, snow, moisture or dew is present. Surface to be bonded to must be clean, dry and free from any dust or deterrent to adhesion. Ambient temperature must be 50°F or above. Don't attempt installation on roofs without adequate slope and drainage.Additional specifications and precautions are contained in the CertainTeed Commercial Roof Systems Specifications. Storage and Flintlastic SA rolls must be stored above ground indoors and protected from the elements. Handling Rolls that are improperly stored or have been on hand for prolonged periods of time may lose their tack.Do not attempt to install rolls that do not exhibit an adequate bond. Warranties CertainTeed offers Limited (product only)and No Dollar Limit(NDL, product and workmanship)warranties. Warranty type and duration is dependent on roof system configuration and contractor selection. Only CertainTeed Gold and Silver Star Contractors are eligible to apply for NDL warranties on specific roof projects. For more information, see CertainTeed Commercial Roof Systems Specifications or contact Commercial Roofing Technical Services. Technical CertainTeed provides technical assistance in the design, selection, specification and Assistance and application guidelines for all CertainTeed Commercial Systems. Architectural and field representatives are available for consultation within each region. For more information, Services contact CertainTeed Commercial Roofing Technical Services at 800-396-8134 x2. ASK ABOUT ALL OF OUR OTHER CERTAINTEED® PRODUCTS AND SYSTEMS: CertainTeed Corporation 20 Moores Road ROOFING • SIDING • TRIM • DECKING • RAILING • FENCE Malvern, PA 19355 GYPSUM • CEILINGS • INSULATION Professional: 800-233-8990 www.certainteed.com http://blog.certainteed.com Consumer:800-782-8777 r.03/16 CertainTeed Corporation,Printed In the U.S.A. Code No.COMM-169 SAINT GOBAIN Arlington, Daniel From: Caleb Wagner[cwagner@hwcontracting.net] Sent: Tuesday, June 21, 2016 4:22 PM To: Arlington, Daniel Subject: RE: 2233 Seminole Rd. plan review Attachments: RPG_Flintlastic-SA-PIyBase-TDS.PDF; RPG_Flintlastic-SA-Cap-TDS PDF Awesome, Thanks. The required information is attached and below. If this isn't what you are looking for or you need more info please let me know. I will print copies to have on site as well. Certainteed Flintlastic SA PlyBase(FL 2533 and FL 16709) Certainteed Flintlastic SA Cap (FL 2533 and FL 16709) Roof slope— 1/12 Roof area—204sf Wind Exposure - B Caleb Wagner MGRM HW Contracting, LLC 110 Cumberland Park Dr.STE 303 Saint Augustine, FL 32095 Mobile:904.338.4581 cwagner@hwcontracting.net www.hwcontracting.net CGC 1519928 This communication and any files transmitted with it,or attached to it,are confidential and are intended solely for the use of the individual or entity to which it is addressed and may contain information that is confidential,legally privileged,protected by privacy laws,or otherwise restricted from disclosure to anyone else.If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient,you are hereby notified that any use, dissemination,forwarding,printing,or copying of this e-mail is strictly prohibited.If you received this e-mail in error,please return the e-mail to the sender, delete it from your computer and destroy any printed copy of it. From:Arlington, Daniel [mailto:darlington@coab.us] Sent:Tuesday,June 21, 2016 4:08 PM To: Caleb Wagner<cwagner@hwcontracting.net> Subject: RE: 2233 Seminole Rd. plan review We can do this one by email. In the future, please submit all information with the application. Thanks, Dan Arlington From: Caleb Wagner [mailto:cwagner@hwcontracting.net] Sent: Tuesday, June 21, 2016 3:54 PM To: Arlington, Daniel Subject: RE: 2233 Seminole Rd. plan review 1 Thanks Dan, to add this information to I need to come to the front desk and add it to the current application? Caleb Wagner MGRM HW Contracting, LLC 110 Cumberland Park Dr.STE 303 Saint Augustine, FL 32095 Mobile:904.338.4581 cwagner@hwcontracting.net www.hwcontracting.net CGC 1519928 This communication and any files transmitted with it,or attached to it,are confidential and are intended solely for the use of the individual or entity to which it is addressed and may contain information that is confidential,legally privileged,protected by privacy laws,or otherwise restricted from disclosure to anyone else.If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient,you are hereby notified that any use, dissemination,forwarding,printing,or copying of this e-mail is strictly prohibited.If you received this e-mail in error,please return the e-mail to the sender, delete it from your computer and destroy any printed copy of it. From:Arlington, Daniel [mailto:darlington@coab.us] Sent:Tuesday,June 21, 2016 10:33 AM To: Caleb Wagner<cwagner@hwcontracting.net> Subject: 2233 Seminole Rd. plan review Mr. Wagner, Please find the attached plan review comments for 2233 Seminole Rd. Dan Arlington, CBO City of Atlantic Beach 2