379 Skate Rd - Permit ROOF18-0043 }J
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH, FL 32233
"!J;319, INSPECTION PHONE LINE 247-5814
ROOF NON SHINGLE -
MUST CALL BY 4PM FOR NEXT DAY INSPECTION: 247-5814
PERMIT INFORMATION:
PERMIT NO: ROOF18-0043
Description: shingle &torch down re-roof- FL10124.1 FL13857.4 FL5680.1
Estimated Value: 8995
Issue Date: 4/24/2018
Expiration Date: 10/21/2018
PROPERTY ADDRESS:
Address: 379 SKATE RD
RE Number: 171671 0000
PROPERTY OWNER:
Name: Ty Bliss
Address: 379 Skate Road
ATLANTIC BEACH, FL 32233
GENERAL CONTRACTOR INFORMATION:
Name:
Address:
Phone:
Name: ROMANO BROTHERS ROOFING, INC
Address: 155 E. Levy Road QA DANIEL JOSEPH ROMANO
Atlantic Beach, FL 32233
Phone:
PERMIT INFORMATION:
Please see attached conditions of approval.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOU PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB
SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY
BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
NOTICE: In addition to the requirements of this permit, there may be additional restrictions
applicable to this property that may be found in the public records of this county, and there may
be additional permits required from other governmental entities such as water management
districts, state agencies, or federal agencies.
* A notice of Commencement is only required for work exceeding an estimated value of
$2,500. For HVAC work, a Notice of Commencement is only required when HVAC work
exceeds and estimated value of$7,500.
I!,:LYj,JCity of Atlantic Beach APPLICATION NUMBER
�s t� Building Department (To be assigned by the Building Department.)
s 800 Seminole Road V0O P f _
s Atlantic Beach, Florida 32233-5445 (
CC l
Phone (904)247-5826 • Fax(904)247-5845 1 C
E-mail: building-dept@coab.us Date routed: kq 31 A
City web-site: http://vmw.coab.us
APPLICATION REVIEW AND TRACKING FORM
Property Address: l S G( �� . De ment review required Ye No
Building
Applicant: 6 main p �j tu' . � �h �� Planning &Zoning
Tree Administrator
Project: Sh�n��,rZCL_ -Wf LVk- �(��/1 Public Works
Public Utilities
Public Safety
Fire Services
Review fee $ Dept Signature
Other Agency Review or Permit Required Review or Receipt Date
of Permit Verified B
Florida Dept. of Environmental Protection
Florida Dept. of Transportation
St. Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPLICATION STATUS
Reviewing Department First Review: roved. ❑Denied. ❑Not applicable
(Circle one.) Comments:
BUILDIN
PLANNING & ZONING
Reviewed by: Date:--'/-.,2 ?-Jap-
4
TREE ADMIN. Second Review: ❑Approved as revised. ❑Denied. 61 ❑Not applicable
PUBLIC WORKS Comments:
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: ❑Approved as revised. ❑Denied. ❑Not applicable
Comments:
Reviewed by: Date:
Revised 05/19/2017
OFFICE COPY
Building Permit Application Updated 12/8/17
City of Atlantic Beach
800 Seminole Road,Atlantic Beach,FL 32233
Phone:(904)247-5826 Fax:(904)247-5845 /1 ?�
Job Address: 3� "I �31C� Cit Number: Vl/t �Qy ,�
L gal Descrip ion - (1 C ( ._RE#�
iJn, al A 'i
Valuation of Work(Replacement Cost �� Heated/Cooled SF Non-Heated/Cooled
• Class of Work(Circle one) w AZ
5AIteration Repair Move Demo Pool Window/Door
• Use of existing/proposed structure(s)(Circle one): Commercial Resident)
• If an existing structure,is a fire sprinkler system installed?(Circle one): es No N/A
• Submit a Tree Removal Permit Application if any trees are to be removed or Affidavit of No Tree Removal
D scribe in Vtail the type of work to be performed:
/C:Z>
Q`sr o I Q ,J v-N 'Stck, T }
Florida Product Approval# for multiple products use product approval form
Propertv Owner Information (�
Name: ISS Address:
City cL 4r' State E—Zip 3n3 Phone .11X 21
E-Mail61 55 f9_QA'Nb0t(1tQ,Con
Owner or AprMrAgent, Power of:Aney or Agency Letter Required)
Contractor Informs ' n
Name of Compan Qualif 'n gent:
Address IV City State zip
Office Phone Job Site/Contact Number
State Certification/Registration ' E-Mail
Architect Name&Phone#
Engineer's Name&Phone#
Workers Compensation t'S ) C-n C'r. d
aDts
LI)I` ;� �. `j }+ Exempt/Insurer/Lease Employees/Expiration Date ' 1
Application is hereby m#tf�td obtain a permit to do the work and installations as indicated. I certify thatfio work or its lilt?) has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulationg
construction in this jurisdiction.I understand that a separate permit must be secured for ELECTRICAL WORK,PLUMBING,SIGNS,
WELLS,POOLS,FURNACES,BOILERS,HEATERS,TANKS,and AIR CONDITIONERS,etc. NOTICE: In addition to the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and
there may be additional permits required from other governmental entities such as water management districts,state agencies,o
federal agencies. LL o
co
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all `o m;N
applicable laws regulating construction and zoning. 3 o
NL �N
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY J E o
7 V1 E O
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND z o 0
�UVn
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE z z 2 W
RECORDING YOYR NOTICE OF COMMENCEMENT. ''f. �
a
NJ
(Signature of Owner or Agent) (Signature of Contractor)
(including contractor)
d a d sworn to(or affirmed before me this ��day of Si ned and sworn to(or affirme before me this day of
x 3 z i by L`h( 6 1�(ni f f I I , Z61 q,by T J ng k5 sl�
m
3m v _
3 v, c -- Si•na
oo j (Signature of Notary) -' (Signa urea oTTdbta".�
�
N j fir/,
N ,' ) ersonally Known OR [ ersonally Known OR
00 roduced Identification [ ]Produced Identification
i;o
o �y of Identification: Type of Identification:
Pen-nit ijo. P � 'PREPARE IP!3UPLICA T E! i
State o;_ ` Tax Folio
County of
T ti1ttom it;nay concern;
The undersigned hereby informs you that improvements Will be mads to certain real '
accordance with Section 713 of the Florida Statutes,the following information is stated in this NOTICE OF
accordance
property,and in
i�
rop�rbJ being Prov d: �(
Address of property being improved:
General description of improvements:Reroof
Address 11 i
`
O.mzr's interest in site of the improveQ 2.aC.�t L
mrcn
Fee Simple Titleholder(if other than ov�nt r)
Name i
. t
Address
i
Contractor Romano Brother Rooting rrc i, t
I
Address I55 z^_Lely Rd,"Lnlic 3each,F1.32233 '
Phone Alo. (904)246-5649
Surety(if any) Fax 140.
i
Address i
i
Phone i+lo. Amount of bond S
Fax Na_ I
.
Name and address
OF any person making a loan fort
=consirtction of the improvements.
'
'•
Address
Phone No. i
Fax No_
Name of Person Vviihin the Sto+e of Florida,cher thar.;tirnself,designated by o+an r upon whom
documents may be served: no5ces or other
Name Danny S.-Romano !
Address loo F-Levy Rd,Atlantic Beach,FL 32233 `
i
Phone Na. (904)246-5649 I
Fax No.
I
In addition to himself.Owner designates the foliov:Pno person to receive a co
Section 713.06(2)(b).Florida Statutes. iii in at Osv PY of the Lienors iVotice
t Hers as Provided in
Name optior,)-
i
Address I
t
Phone No.
Fax No.
U.
Expiration date of Notice of Commencement(the expiration date is one 1 o
MON
different dale is specified): ( )year from the date of recording unless a i r N
THIS SPACE - c H°
rOh i?LCORDi=R'S L1Se ONL'! i T o
• 0101NER w E o
I Signa . j Z o o m
` E<fcr-m i day of DAi (g i o X
unty o vel.Slat f arida.ties p_rsandh op i the I 2 2 2 w
I-.ped
pz 1 178 himselr,h=rssir a d a6irms hat all statements and da herein by i
Doc#2018083094,OR BK 18344 a' art trueand accu to
Number Pages: 1 clararrons haazin
Recorded 04/10/2018 11:47 AM, j E
RONNIE FUSSELL CLERK CIRCUIT COURT DUVAL I °jt•t
COUNTY I
RECORDING $10.00 7'2rsQnally,
.Pu'i'ca'Lzye.stat cf
nmission azpirs: Co
Kna•,..n l
Produced td=niilcation art
OFFICE COPS'
TRINITY ERa
TABLE IA:WOOD DECKS-NEW CONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE A-1: BONDED INSULATION,BONDED ROOF COVER
System Deck Base Insulation Layer Top Insulation Layer Roof Cover(Note 14)
No. (Note 1) Type Attach Type Attach Base ply Cap MDP(psf)
Min.19/32-inch Min.1S-Inch Min.OS-inch Structodek High
ne or more
plywood or OSB at max. EnergyGuard RA, GAF 2-Part Density Fiberboard Roof GAF 2-Part BP-AA,SS-AA SP-AAA,S SOAA,SBS-TA SBS-AA,SBS-TA or
24-inch span EnergyGuard FIN -52.5
P EnergyGuard RN Insulation or APP-TA APP-TA
Min.19/32-Inch Min.1.5-Inch Min.0.25-Inch Dens Deck,
EnergyGuard RA, Dens Deck Prime or BP-AA,SBS-AA,SBS- (Optional)One or more SBS-AA,SBS-TA or
W-2. plywood or OSB at max. GAF 2-Part GAF 2-Part BP-AA,SBS-AA,SBS-TA
24-Inch span EnergyGuard RH, SECUROCK Gypsum-Fiber TA or APP-TA APP-TA -52.5
EnergyGuard RN Roof Board or APP-TA
Min.19/32-Inch Min.1.5-Inch Min.0.25-Inch Dens Deck, WeatherWatch XT
EnergyGuard RA, Dens Deck Prime or
W-3. plywood OSB at max. EnergyGuard RH, GAF 2-Part SECUROCK Gypsum-Fiber GAF 2-Part Mat Surfaced Leak (Optional)SBS TA,APP- SBS-TA,APP-TA 52.5
APP-
24-Inch span
n EnergyGuard RN Roof Board Barter
TABLE 18-1:WOOD DECKS—NEW CONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE A-2: MECHANICALLYATTACHED ANCHOR SHEET,BONDED INSULATION,BONDED ROOF COVER
System Deck Anchor Sheet I Base Insulation Top Insulation Roof Cover(Note 14) MDP
No. (Noce z) Type Fasteners Attach Type Attach Type Attach Base ply Cap (psf)
CONVEOMONAL SYSTEMS:
Min.1-Inch Min.OS-Inch
GAFGLAS#75 Base Sheet, 32 ga.,1- 8-Inch o.c.at EnergyGuard Polyiso Structodek High
Min.15/32- min.4-Inch laps Insulation, Density Fiberboard
Tri-Ply#75 Base Sheet, 5/8-inch dia. (Optional)
Inch
and 8-inch o.c.in EnergyGuard Ultra Roof Insulation or
W-4. plywood at GAFGLAS#80 Ultima Base tin caps with Hot Hot gp-qA ggS_ B?'�� SBS-AA,
Sheet,GAFGLAS Stratavent 11 ga, two,equally Polyiso Insulation or asphalt EnergyGuard Perlite SBS-AA, SBS-TA, -45.0
max.24 spaced, EnergyGuard RH P Recover Board or Min. asphalt AA
Inch span Nailable Venting Base annular ring SBS-TA, APP-TA
p Sheet,Ruberold 20 Smooth shank nails staggered center Polyiso or min.1.5- 0.75-Inch EnergyGuard APP-TA
rows Inch EnergyGuard RA Perlite Roof Insulation
or EnergyGuard RN (homogeneous)
Min.1-Inch
GAFGLAS#75 Base Sheet, 32 ga.,i- 8-Inch o.c.at EnergyGuard Polyiso
Min.15/32- min.4-inch laps Insulation,
Inch Tri-Piy#75 Base Sheet, 5/8-inch dia. Min.0.25-Inch Dens (Optional)
and 8-inch o.c.In EnergyGuard Ultra
_ W-5, plywood at GAFGLAS#80 Ultima Base tin caps with Hot Deck Prime or Hot BP-AA,SBS- BP-AA, SBS-AA,
,
' max.24 Sheet,GAFGLAS Stratavent 11 ga. twoequally Polyiso Insulation or asphalt SECUROCK Gypsum- asphalt AA,SBS-TA, SBS-AA, SBS-TA, -45.0
1Nallable Venting Base annular ring spaced, EnergyGuard RH Fiber Roof Board APP-TA SBS-TA, APP-TA
Inch span Sheet,Ruberoid 20 Smooth shank nails staggered center Polyiso or min.1,S- APP TA
rows Inch EnergyGuard RA
or EnergyGuard RN
Exterior Research and Design,LLC.d/b/a Trinity)ERD Evaluation Report 01506.11.04-R18 for FLS680-1138
Certificate of Authorization#9503 FBC NON-HVHZ EVALUATION;GAF Modified Bitumen Roof Systems Revision 18:04/12/2017
Prepared by: Robert Nleminen,PE-59166 GAF;(B00)766-3411 Appendix 1,Page 5 of 85
"i TRINITY I ERD
APPENDIX 1:ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE
Table Deck Application Type Description
1A Wood New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation, Bonded Roof Cover Page
2
1B Wood New, Reroof(Tear-Off)or Recover D Insulated, Mech.Attached Base Sheet, Bonded Roof Cover
2
1C-1 Wood New or Reroof(Tear-Off) E Non-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover
2
IC-2 Wood New, Reroof(Tear-Off)or Recover E Non-Insulated, Mech. Attached Base Sheet, Bonded Roof Cover
3
1D Wood New or Reroof(Tear-Off) F Non-Insulated, Bonded Roof Cover
3
The following notes aooly to the Systems outlined herein:
1. Roof decks shall be in accordance with FBC requirements to the satisfaction of the AHJ. Wind load resistance of the roof deck shall be documented through
proper codified and/or FBC Approval documentation.
2. Unless otherwise noted, fasteners and stress plates for Insulation attachment shall be as follows. Fasteners shall be of sufficient length for the following
engagements:
Wood Deck: OMG #12 or #14 HD with OMG 3 In. Galvalume Steel Plate or Tru-Fast DP or HD with MP-3 Plates. Minimum 3k-Inch plywood
penetration or minimum 1-Inch wood plank embedment.
3. Unless otherwise noted, Insulation may be any one layer or combination of polyisocyanurate, polystyrene, wood fiberboard, perlite, DensDeck, DensDeck Prime,
DensDeck DuraGuard, SECUROCK Gypsum-Fiber Roof Board or SECUROCK Glass-Mat Roof Board that meets the QA requirements of F.A.C. Rule 9N-3 and is
documented as meeting FBC 1505.1 and, for foam plastic, FBC 2603.4.1 or 2603.8, when Installed with the roof cover.
4. For mechanically attached components or partially bonded insulation, the maximum design pressure for the selected assembly shall meet or exceed the Zone 1
design pressure determined in accordance with FBC Chapter 16, and Zones 2 and 3 shall employ an attachment density designed by a qualified design
professional to resist the elevated pressure criteria. Commonly used methods are RAS 117 and FM LPDS 1-29. Assemblies marked with an asterisk* carry the
limitations set forth in Section 2.2.1.5.1(a) of FM LPDS 1-29 for Zone 2/3 enhancements.
5. For assemblies where all components are fully adhered, the maximum design pressure for the selected assembly shall meet or exceed critical design pressure
determined In accordance with FBC Chapter 16, and no rational analysis is permitted.
6. For mechanically attached components over existing decks, fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design
professional shall review the data for comparison to the minimum requirements for the system. Testing and analysis shall be in accordance with TAS 105 or
ANSI/SPRI FX-1.
7. For existing substrates in a bonded recover or re-roof installation, the existing roof surface or existing roof deck shall be examined for compatibility and bond
performance with the selected adhesive, and the existing roof system (for recover) shall be capable of resisting project design pressures on Its own merit to the
satisfaction of the AHJ, as documented through field uplift testing in accordance with ASTM E907, FM LPDS 1-52,ANSI/SPRI IA-1 or TAS 124.
S. "MDP"= Maximum Design Pressure Is the result of testing for wind load resistance based on allowable wind loads.Refer to FBC 1609.1.5 for
determination of design wind loads.
Exterior Research and Design, LLC,d/b/a TrinitylERD
Certificate of Authorization#9503 Evaluation Report 739820.12.11 for FL9487-R3
Prepared by: Robert Nieminen,PE-59166 Date of Issuance: 12/09/2011
Appendix 1,Page 1 of 3
�\JTR1N1TYt.ERD
TABLE 1A: WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER
SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION, BONDED ROOF COVER
System Base Insulation Top Insulation Layer Roof Cover MDP(psf)
No. Roof Deck Layer Type Fasteners Attach Base Ply cap
Min. 19/32'plywood at (Optional)One or Min.3/8-Inch
max.24"spans attached more layers,any SECUROCK Gypsum- See Note 2 1 per 1 ' EasyBase (Optional)
W 1 ft
EasyStick Plus -52.5
with 8d common or ring combination,loose Fiber Roof Board EasyBase
shank nails,6"o.c. laid
TABLE 1B: WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER
SYSTEM TYPE D: INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER
System Insulation Layer Base Sheet Roof Cover MDP(psf)
No. Roof Deck Type Attach Type Fasteners Attach Ply Cap
Min. 19/32"plywood at 10-Inch o.c.In the min.4-
max.24"spans attached Any type, Inch lap and 10-Inch o.c.In EasyBase EasyStick Plus -60.0
W-2 with 8d common or ring thickness or Loose laid EasyLay See Note 2 two,equally spaced,
shank nails,6"o.c. combination staggered center rows
TABLE IC-1: WOOD DECKS—NEW CONSTRUCTION or REROOF(Tear-Off)
SYSTEM TYPE E: NON-INSULATED, MECHANICALLY ATTACHED BASE SHEET, BONDED ROOF COVER
System Base Sheet Roof Cover MDP(psf)
No. Roof Deck Type Fasteners Attach Ply Cap
Min. 19/32'plywood at max.24" 12 ga.annular ring shank nails 7-Inch o.c.in the 4-Inch lap and 7-
W-3 spans attached with 8d common EasyLay and min. 32 ga., 1-5/8" Inch o.c.in three,equally spaced, EasyBase EasyStick Plus -45.0
nails,6"o.c. diameter tin-caps. (Ref: FBC staggered center rows
1517.5)
Min. 19/32'plywood at max.24" 12 ga.annular ring shank nails 7-Inch o.c.In the 4-Inch lap and 7-
W-4 spans attached with 8d EasyLay and min.32 ga., 1-5/8" inch o.c.In three,equally spaced, EasyBase EasyStick Pius -60.0
diameter tin-caps. (Ref: FBC staggered center rows
shank Halls,6"o.c. 1517.5)
Exterior Research and Design, LLC.d/b/a TrinityjERD Evaluation Report 739820.12.11 for 1
Date of Issuance: 1Z/09/2012/09/2011
Certificate of Authorization #9503 Appendix 1,Page 2 of 3
Prepared by: Robert Nleminen,PE-59166
TRINITY i ERD
TABLE 1C-2: WOOD DECKS-NEW CONSTRUCTION,REROOF(Tsar-Off)
SYSTEM TYPE E: NON-INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER
System ft)or RECOVER
No. Roof Deck
Base Sheet
Min. 19/32" I Type Fasteners Roof Cover
W-5 P Ywood at max.24" Attach MDP(paf)
spans attached with 8d common EasyLay 10-inch o.c.in the min.4-Inch lap and 10-Inch Ply
Cap
or ring shank nails,6"O.C. See Note 2 o.c.in two,equally spaced,staggered center EasyBase EasyStick Plus -60.0
rows
TABLE 1D: WOOD DECKS—NEW CONSTRUCTION or REROOF(Tear-Off)
System SYSTEM TYPE F: BONDED ROOF COVER
No. Roof Deck
Roof Cover
W-6 MIn. 19/32"plywood at max.24"spans Base Ply MDP(psf)
attached with 8d na Cap
o.c. -- Qk nails, 6 EasyBase
---- - ------ __--.___. (Optional)EasyBase
Easystick Ply :
Exterior
Research
of Au horizattlo�i�
Cert ' LL d/b/a TrinitylERD
Prepared by: Robert Nieminen, PE-59166
Evaluation Report 739820.12.11 for fL9487-111
Date of Issuance: 12/09/2011
Appendix 1,Page 3 of 3