2233 SEMINOLE RD #26 - PERMIT RERF18-0104 T
CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH,FL 32233
INSPECTION-PHONELINE 247-58141
REROOF SHINGLE -
MUST CALL BY 4PM FOR NEXT DAY INSPECTION: 247-5814
PERMIT INFORMATION:
PERMIT NO: RERF18-0104
Description: SHINGLE ROOF
Estimated Value: 4274
Issue Date: 5/4/2018
Expiration Date: 10/31/2018
PROPERTY ADDRESS:
Address: 2233 SEMINOLE RD 26
RE Number: 1695190150
PROPERTY OWNER:
Name: MIZRAHI JACK D
Address: 9962 RIDGEFIELD DR
JACKSONVILLE, FL 32257-5871
GENERAL CONTRACTOR INFORMATION:
Name:
Address:
Phone:
Name: Triton Roofing & Restoration LLC
Address: 480 State Rd 13 Ste 106-348
St Johns, FL 32259
Phone:
PERMIT INFORMATION:
Please see attached conditions of approval.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOU PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB
SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY
BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
NOTICE: In addition to the requirements of this permit,there may be additional restrictions
applicable to this property that may be found in the public records of this county, and there may
be additional permits required from other governmental entities such as water management
districts, state agencies, or federal agencies.
* A notice of Commencement is only required for work exceeding an estimated value of
$2,500. For HVAC work, a Notice of Commencement is only required when HVAC work
exceeds and estimated value of$7,500.
Building Permit Application Upclate�12/8/17
City of Atlantic Beach
800 Seminole Road,Atlantic Beach,FL 32233
Phone:(904)247-5826 Fax:(904)247-5845
Job Address: =??-3 Road Permit Number: ' RGIRPt (S-0104
Legal Description J0090 &
V11111111201.A .4
_FW RE#.16 9L!V__QZ�A
Valuation of Work(Replacement Cost)$ 114 r Heated/Cooled SIF Non-Heated/Cooled_ !?&7
• Class of Work(Circle one): New Addition teration epair Move Demo Pool Window/Door
• Use of existing/proposed structure(s) (Circle one): �,om m e J Residential
• If an existing structure,is a fire sprinkler system installRd?�Irct one): Yes No 429D
• Submit a Tree Removal Permit'Application if any trees are to be removed or Affidavit—of No Tree Removal
Describe in detail the type of work to be performed:
yerbor
Florida Product Approval# for multiple pro ucts use p uct provalfqrm
oy a ,
Property Owner Information U;ki- t
Name� VC164LYI Address: Q avee;e
City I I ut t CA-C.41 Stat'ei,-C Zip _3a2=5__Q Phone qj�g(- 6?/3.
E-Mail q y I Me La) a=rnev lox.cl)M
Owner or Agent(WAgent, Power of AttornC'y-'or Agency Letter Required)
Contractor Information
Name of QompanicTY it h koc6q e&ivrOQua ingAgpnt: Nofxrt
L,
Address4:q0_'-`> lu ua
C�
ity ZfJQ111�6 State Zip
Office Ph�ne.ROLf(a ,Job Site/"ntact Number
State Certification/Registration# E-Maill V I z6a 95) 1 ri 70_P1 ej�C� Ile -(-6M
Architect Name&Phone#
Engineer's Name&Phone#
Workers Compensation I(vr- ZZ Somw -L ol t x)I Z?
Exempt/Insurer/Lease Employees/Expiration Date I I
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulationg
construction in this jurisdiction.I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING,SIGNS,
WELLS, POOLS,FURNACES, BOILERS, HEATERS,TANKS,and AIR CONDITIONERS, 'etc. NOTICE: In addition to the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and
there may be additional permits required from other governmental entities such as water management districts,state agencies,or
federal agencies.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER ORAN A17ORNEY BEFORE
RECORDING YOUR NOTICE OF COMMENCEMENT.
(Signature :)f Owner WAgentf ,;/(Signature of Contractor)
(including contractor)
Signed and sworn t�(or affirmed)before me t day Of Si and swor ffil 2me
Cif Ov r bEyfpr( d
AA .1-01 hv It
U
(_Jnai'u`re-of.Nota
atdr ES
ekes
M
_41"... ISSION#!GG0925]96
Personally Known OR loCh We of Fladda Personally Known OR EXPIRES April 10,2021
"XProduced Identification CAmIsslon E*Ims 001=1 E I Produced Identification
Type of Identification: Commlission N&GG 61272 Type of Identification
f'L 10 L-W,�0 V 110 12,070
PRODUCT APPROVAL INFORMATION SHEET FOR THE CITY OF ATLANTIC BEACH,FLORIDA
Project Name:-66�(&rn V/MZ&r Permit #
Project Address: Z a 3 J&n- J -
)gj2&?,
As required by Florida Statute 553.842 and Florida Administrative Code Rule 9B-72,please provide the information and product approval number(s)
for the building components listed below as applicable to the building construction project for the permitnumber listed above. You should contact
your product supplier if you do not lmow the product approval number for any of the applicable listed products. Information regarding statewide
product ap val mLy be obtained at:www.floridabuWilding. rR. —----------
Category/Subcategory Manufacturer Product Description Limitation of Use State Local#
7 EXTERIOR DOORS
1. Swinging
2. Sliding
3. Sectional
4.Roll up
5.Automatic
6. Other
B.WINDOWS
1. Single hung
2.Horizontal slider
3. Casement
4.Double hung
5.Fixed
6. Awning
7.Pass-through
8.Projected
9.Mullion
10.Windbreaker
11.Dual action
17. Other
Category/Subcategory Manufacturer Product Description Limitation of Use State# Local
E.SHUTTERS
1.Accordion
2.Bahama
3. Storm panels
4. Colonial
5.Roll-up
6. Equipment
7. Other
F. STRUCTURAL
COMPONENTS
1. Wood connector/anchor
2. Truss plates
3.Engineered lumber
4.Railing
5. Coolers-freezers
6. Concrete admixtures
7.Material
8. Insulation forms
9.Plastics
10.Deck-roof
11.Wall
12. Sheds
13. Other
G.SKYLIGHTS
1. Skylight
12. Other Citation of Use
Category/Subcategory Manufacturer Product Description State Local#
C.PANEL WALL
1. Siding
2. Soffits
3.EIFS
4. Storefronts
S. Curtain walls
6.Wall louvers
7. Glass block
8.Membrane
9. Greenhouse
10. Synthetic stucco
11. Other
A ROOFING PRODUCTS
1.Asphalt shingles Hlagg 93
�Ie ;t
2.Underlayments no
3.Roofing fasteners
4.Nonstructural metal roof
S.Built-up roofing
6.Modified bitumen
7. Single ply roofing
8.Roofing tiles
9. Roofing insulation
10.Waterproofing
11.Wood shingles/shakes
12.Roofing slate
13.Liquid applied roofing
14. Cement-adhesive coats
15.Roof tile adhesive
16. Spray applied polyurethane
roof
2. Other
Category/Subcategory Manufacturer Product Description Limitation of Use State 4 Local#
H.NEW EXTERIOR
ENVELOPE PRODUCTS
2.
In addition to completing the above list of manufacturers, product description and State approval number for the products used on this project, the
Contractor shall maintain on the job site and available to the Inspector, a legible copy of each manufacturer's printed specifications and installation
instructions along with this Product Approval Sheet.
I certify that this product approval list is true and correct to the best of my knowledge. I fin-ther certify that use of different components other than the ones
listed in this document must be approved by the Building Official.
C�1,7915 mazav_ -�
(Contractor Name) (Print Name) (Signature)
CompanyName: 7-,r/& 9e6l� rabon. 4-C
n RoQfino e A
L/ s
z
Mailing Address: A/ ell e &j6
City: & j6hns State:- FL Zip Code:.a2�81�
Telephone Number: (O/C)l�—&�/�.g�,/�l—FaxNumber: OX)6e3 - ,?E.D,3
Cell Phone Number: �?�.�E-mail Address:at-/,� o T/&' v)a d5or j/t tl4ep-6017
Business & Professional Regulation
13CIS Home I Log 1� I User Registration I Hot Topics Submit Surcharge Stats&Facts Publications FBC Staff BCIS Site Map Links Search
Wda
prProduct Approval
USER:Public User
Product Approval Menu>Product or AD lication Search>
_p Ication List>Application Detail
FL# FL18355-R4
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Arch ived
Product Manufacturer TAMKO Building Products,Inc.
Address/Phone/Email PO Box 1404
3oplin, MO 64802
(417) 624-6644 Ext 2305
kerri—eden@tamko.com
Authorized Signature Kerri Eden
kerri—eden@tamko.com
Technical Representative Kerri Eden
Address/Phone/Emall PO Box 1404
3oplin, MO 64802
(417) 624-6644 Ext 2305
kerri—eden@tamko.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Asphalt Shingles
Compliance Method Evaluation Rep ort from a Florida Registered Architect or a Licensed Florida
Professional Engineer
0 Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who developed Zachary R. Priest
the Evaluation Report
Florida License PE-74021
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 01/07/2019
Validated By Locke Bowden RE.
L6 Validation Checklist-Hardcopy Received
Certificate of Independence FL18355 R4 COI TBP15001.4 2017 FBC Eval Reoort Shin les flnal.pdf
Referenced Standard and Year(of Standard) Standard Year
ASTM D 3161 2016
ASTM D 3462 2010
ASTMD D 7158 2011
TAS 100 1995
Equivalence of Product Standards
Certified By Approved Testing Lab
FL18355 R4 E ulv UL letter for standards for FBC 2017.pdf
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 09/25/2017
Date Validated 09/27/2017
Date Pending FBC Approval 10/08/2017
Date Approved 12/12/2017
Summary of Products
FL# Model,Number or Name Description
18355.1 Glass-Sea[, Elite Glass-Sea], ASTM D 3462 asphalt shingles and hip and ridge shingles
Heritage, Heritage Premium,
Heritage Woodgate, Heritage
Vintage, Hip and Ridge, and Vintage
Hip and Ridge Shingles
Limits of Use Installation Instructions
Approved for use in HVHZ:Yes FL18355 R4 II TBP15001.4 2017 FBC Eval Report Shin les
Approved for use outside HVHZ:Yes final.p�jf
Impact Resistant: N/A Verified By: Zachary R. Priest PE-74021
Design Pressure: N/A Created by Independent Third Party: Yes
Other:See evaluation report for limits of use. Evaluation Reports
FL18355 R4 AE TBP15001.4 2017 FBC Eval RepArt ShingLes
fta�Lplft
Created by Independent Third Party: Yes
F..�kj F.ext
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.gmyr�jght 2007-2013 State of Florida.::Lrivacy atatement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.-Pursuant to Section
455.275(l),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address ifthey have
one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal
address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,
please click here
Product Approval Accepts:
a F10-1 Ri M
-Credit Card
.Safe
Certificate of Authorization No. 29824
17520 Edinburgh Dr
CREEK Tampa, FL 33647
TECHNICAL SERVICES, LLC (813)480-3421
EVALUATION REPORT FLORIDA BUILDING CODE,6 T"EDITION(2017)
Manufacturer: TAMKO BUILDING PRODUCTS Issued September 25, 2017
220 West 4 1h Street
Joplin, MO 64801
(417)624-6644
Manufacturing Plants: Joplin, MO
Phillipsburg, KS
Frederick, MD
Dallas,TX
Tuscaloosa,AL
Quality Assurance: UL LLC(QUA9625)
SCOPE
Category: Roofing
Subcategory: Asphalt Shingles
Code Sections: 1504.1.1, 1507.2.5, 1507.2.7.1, 1523.6.5.1
Properties: Physical properties,Wind Resistance,Wind Driven Rain
REFERENCES
gn2y Report No. Standard Year
PRI Construction Materials Technologies(TST5878) TAP-043-02-01 TAS 100 1995
PRI Construction Materials Technologies(TST5878) TAP-051-02-01 TAS 100 1995
PRI Construction Materials Technologies(TST5878) TAP-054-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-1 14-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-1 17-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-1 30-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-1 31-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-1 65-02-01 TAS100 1995
PRI Construction Matedals Technologies(TST5878) TAP-280-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-303-02-01 TAS100 1995
PRI Construction Materials Technologies(TST5878) TAP-307-02-01 TAS 100 1995
PRI Construction Materials Technologies(TST5878) TAP-314-02-01 Rev 2 TAS 100 1995
PRI Construction Materials Technologies(TST5878) TAP-315-02-01 ASTM D 6381 2008(2013)el
PRI Construction Materials Technologies(TST5878) TAP-317-02-01 TAS 100 1995
UL LLC(TST9628) 02NK9507 ASTM D 3161 2016
UL LLC(TST9628) 04NK24366 ASTM D 3462 2010A
UL LLC(TST9628) 05NK28006 ASTM D 6381 2008(2013)el
UL 2390
ASTM D 7158 2011
UL LLC(TST9628) 06NK03898 ASTM D 3161 2016
ASTM D 3462 201 OA
UL LLC(TST9628) 08CA59132 ASTM D 3161 2016
UL LLC(TST9628) 09NK07896 ASTM D 3161 2016
ASTM D 3462 201 OA
UL LLC(TST9628) 10CA50498 ASTM D 3462 201 OA
UL LLC(TST9628) IOCA64882 ASTM D 3161 2016
UL LLC(TST9628) IINK14014 ASTM D 3161 2016
ASTM D 3462 201 OA
UL LLC(TST9628) 12CA24551 ASTM D 3161 2016
UL LLC(TST9628) 4786110543 ASTM D 6381 2008(2013)el
UL LLC(TST9628) 4787043752 ASTM D 3161 2016
UL LLC(TST9628) 4787148748 ASTM D 7158 2011
ASTM D 3161 2016
ASTM D 3462 2010A
CREEK Technical Services LLC(ANEI 1669) TBP15001.3 Calculations 2017
TBP15001.4 FI-18355-R4 Page I of I I
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
PRODUCT DESCRIPTION
Elite Glass-Seal@ 12-1/4" x 36", ASTM D 3161, Class F and ASTM D 7158, Class H self-sealing, 3-tab
(Frederick,Joplin& asphalt shingle with fiberglass mat coated on both sides with asphalt and surfaced with
Tuscaloosa) ceramic granules complying with ASTM D 3462.
Glass-Seal 12-1/4" x 36", ASTM D 3161, Class F and ASTM D 7158, Class H self-sealing, 3-tab
(Frederick& asphalt shingle with fiberglass mat coated on both sides with asphalt and surfaced with
Tuscaloosa) ceramic granules complying with ASTM D 3462.
Glass-Seal 12-1/4"x:36", ASTM D 7158, Class H self-sealing, 3-tab asphalt shingle with fiberglass
(Joplin) mat coated on both sides with asphalt and surfaced with ceramic granules complying
with ASTM D 3462. Shingles shall be used in the non-HVHZ onl
Heritage@ 13-1/4" x 39-3/8", ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
(Dallas, Frederick, reinforced, laminated architectural asphalt shingle surfaced with mineral granules
Joplin, Phillipsburg& complying with ASTM D 3462.
Tuscaloosa)
Heritage@ Premium 13-1/4" x 39-3/8", ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
(Dallas,Frederick, reinforced, laminated architectural asphalt shingle surfaced with mineral granules
Phillipsburg& complying with ASTM D 3462.
Tuscaloosa)
Heritage@ Premium 12" x: 36", ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass reinforced,
(Frederick) laminated architectural asphalt shingle surfaced with mineral granules complying with
ASTM D 3462.
Heritage@ Vintage@ 17-1/2"x 40", ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass reinforced,
(Phillipsburg) laminated architectural asphalt shingle surfaced with mineral granules complying with
ASTM D 3462.
Heritage@ Woodgate 13-1/4" x 39-3/8", ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
(Dallas&Frederick) reinforced, laminated architectural asphalt shingle surfaced with mineral granules
complying with ASTM D 3462.
Heritage@ Woodgate 12" x 36-3/8", ASTM D 3161, Class F fiberglass reinforced, laminated architectural
(Frederick) asphalt shingle surfaced with mineral granules complying with ASTM D 3462. Shingles
shall be used in the non-HVHZ only.
Hip and Ridge Shingles 12-1/4" x 12", ASTM D 3161, Class F fiberglass reinforced, hip and ridge asphalt
(Frederick&Joplin) shingle surfaced with mineral granules complying with ASTM D 3462.
Vintage@ Hip and Ridge 12" x: 12", ASTM D 3161, Class F fiberglass reinforced, hip and ridge asphalt shingle
(Phillipsburg) surfaced with mineral granules complying with ASTM D 3462.
TBP15001.4 FL18355-R4 Page 2 of I i
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
INSTALLATION
Elite Glass-Sea[@ Basic Wind Speed (Vlt): Max. 194 mph
(Frederick,Joplin& Basic Wind Speed (V.�d): Max. 150 mph
Tuscaloosa) Deck(HVHZ): In accordance with FBC requirements;
& Solidly sheathed min. 19/32 in. plywood or wood plank for
Glass-Seal new construction; Min. 15/32 in. plywood existing
(Frederick,Joplin (Non- construction.
HVHZ)&Tuscaloosa) Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15132 in. plywood or wood plank for
new construction; Min.7/16 in.OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer's application instructions when installing
shingles at slopes greater than 21:12.
Installation(HVHZ): Installed with 5-1/8 inch exposure in accordance with RAS
115 and manufacturer's published installation instructions.
Shingles shall be attached using "6 Nail Pattern" detailed
below.
Installation (Non-HVHZ): Installed with 5-1/8-inch exposure in accordance with FBC
requirements and manufacturer's published installation
instructions. Shingles shall be attached using either"4 Nail
Pattern"or"6 Nail Pattern"detailed below.
NAILS
'I ILI
L
Nailing-' —----------1 . 6-70
Area
t
BM Edge
Figure 1. Elite Glass-Seal&Glass-Seal
4 Nail Paftern (Non-HVHZ only)
NAILS
6-71811
Nailing\-- ----—-------------........................ ..... ...... .....
A .......!!.................. ............. ........................
15.118"
Bun Edge
Figure 2. Elite Glass-Seal&Glass-Seal
6 Nail Pattern
TBP15001.4 FL18355-R4 Page 3 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
Heritage@ Basic Wind Speed (V,,It): Max. 194 mph
(Dallas, Frederick,Joplin, Basic Wind Speed(Vard): Max. 150 mph
Phillipsburg&Tuscaloosa) Deck(HVHZ): In accordance with FBC requirements;
& Solidly sheathed min. 19/32 in. plywood or wood plank for
Heritage@ Premium new construction; Min. 15/32 in. plywood existing
(Dallas, Frederick construction.
Phillipsburg&Tuscaloosa) Deck(Non-HVHZ): In accordance with FBC requirements;
& Solidly sheathed min. 15/32 in. plywood or wood plank for
Heritage@ Woodgate new construction; Min. 7/16 in.OSB existing construction.
(Dallas&Frederick) Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBG requirements. Refer to
the manufacturer's application instructions when installing
shingles at slopes greater than 21:12.
Installation(HVHZ): Installed with 5-5/8 in. exposure in accordance with RAS
115 and manufacturer's published installation instructions.
Shingles shall be attached using T Nail Pattern" detailed
below.
Installation (Non-HVHZ): Installed with 5-5/8 in. exposure in accordance with FBC
requirements and manufacturer's published installation
instructions. Shingles shall be attached using either"4 Nail
Pattern"or"6 Nail Pattern"detailed below.
FASTENERS NAILZONE
OF— /GOMMON
BOND
F U RE 6-618"
I D PO IS
12-1/211 12-3/811 1 2-112`� �-i I I
Figure 3. Heritage@, Heritage@ Premium, and Heritage@ Woodgate(Dallas)
4 Nail Pattern (non-HVHZ only)
FASTENERS,;7,," NAIL ZONE
0-.O/COMMON
BOND
IFXP 01 SURE 6-5/8"
6 1/8"
Figure 4. Heritage@& Heritage@ Premium
6 Nail Pattern
TBP15001.4 FL18355-R4 Page 4 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
NAIL.Z0_NE/
STENERS;P COMMONBOND
T
:6-1/8 EXPPOSURE 5 50
�7-1/2+7-1/2+-M+-1J2+-1/29� [*--V
Figure 5. Heritage@ Woodgate
6 Nail Pattern
12-1/2"
Common Bond
FASTENERS
7
C0 t
92
V,
tn 0 7
Lh CL to
4 39-3/8"
Figure 6. Heritage@, Heritage@ Premium, &Heritage@ Woodgate
Alternate 6 Nail Pattern
PAINT
LINE
7m7/811]� -NAI
.................................... ... LZONE
6-1/8" -,,EDGE OF
COMMON
BOND
EXPOSURE
.6 A511
ACCEPTABLE.
FASTENER LOCATION
DO.NOT FASTEN
ALONGEDGE 0F
MMONBOND
�PREFERRED
.-FASTENER
LOCATION
Figure 7. Heritage@(Tuscaloosa)
Expanded Nail Zone
Nail patterns from Figures 3, 4, and 6 may be placed in the nail zone as described above
TBP15001.4 FL18355-R4 Page 5 of I I
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use,or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
Heritage@ Premium Basic Wind Speed (V,,It): Max. 194 mph
(Frederick) Basic Wind Speed (V��d): Max. 150 mph
Deck(HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min.7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer's application instructions when installing
shingles at slopes greater than 21:12. .
Installation (HVHZ): Installed with 5 in. exposure in accordance with RAS 115
and manufacturer's published installation instructions.
Shingles shall be attached using "6 Nail Pattern" detailed
below.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer's published installation
instructions. Shingles shall be attached using either"4 Nail
Pattern"or"6 Nail Pattern"detailed below.
NAILZONE/
FASTENERS OMMONBOND
Tam:,-W�- -
5 1/ SUR
211 1EXP0 I E 5"
1211 iv--� �—v
Figure 8. Heritage@ Premium (Frederick)
4 Nail Pattern (no'n-HVHZ only)
MAIL ZONE/
FASTENERSj�.,:�/COMMON BOND
T T
OSURE i-
EP
Figure 9. Heritage@ Premium (Frederick)
6 Nail Pattern
TBP15001.4 FL18355-R4 Page 6 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use,or other product attributes that are not
specifically addressed herein.
r77� TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
Heritage@ Woodgate Basic Wind Speed (Vuit): Max. 194 mph
(Frederick) Basic Wind Speed (Vmd): Max. 150 mph
Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min.7/16 in.OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer's application instructions when installing
shingles at slopes greater than 21:12.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer's published installation
instructions. Shingles shall be attached using either"4 Nail
Pattern"or"6 Nail Pattern"detailed below.
NAIL ZONE/
S /T COMMON BOND
EXPOSUREVI
11 11 4-11 2_3/air
Figure 10. Heritage@ Woodgate(Frederick)
4 Nail Pattern (non-HVHZ only)
NAIL ZON P
COMMON BOND
STENERS
EXPOSURE 5"
Figure 11. Heritage@ Woodgate (Frederick)
6 Nail Pattern
TBP15001.4 FL18355-R4 Page 7 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
1`4� CREEK Asphalt Shingles
M TECHNICAL SERVICES, LLC
Heritage@ Vintage@ Basic Wind Speed (V,,It): Max. 194 mph
(Phillipsburg) Basic Wind Speed (Vasd): Max. 150 mph
Deck(HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min.7/16 in.OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer's application instructions when installing
shingles at slopes greater than 21:12.
Installation(HVHZ): Installed with 5 in. exposure in accordance with RAS 115
and manufacturer's published installation instructions.
Shingles shall be attached using "6 Nail Pattern" detailed
below.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer's published installation
instructions. Shingles shall be attached using either"5 Nail
Pattern"or"6 Nail Pattern"detailed below.
0-
41 rxpomm
-2 lbll�h
T
Fastenefs
17-1/2"
rX pcsu re
Figure 12. Heritage@ Vintage@
5 Nail Pattern (non-HVHZ only)
40'
Put
Zone
P('
71 i
r17�-Yr
Eqxdum
7_
Figure 13. Heritage@ Vintagee
6 Nail Pattern
TBP15001.4 FI-18355-R4 Page 8 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
Hip&Ridge Basic Wind Speed (V,,jt): Max. 194 mph
(Frederick&Joplin) Basic Wind Speed(Vasd): Max. 150 mph
Deck(HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in:OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements.
Installation: Installed with 5-1/8 inch exposure in accordance with the
FBC and manufacturer's published installation instructions.
The direction of the exposed end shall be away from the
prevailing wind.
Direction of prevailing wind
Start 5-118" exposure
here—
Start
h e r<te-
Figure 1 5-1118" exposure
Fastener
Fastener
KQ5-5/8"
Figure 2 Figure 3
1/4?1
Figure 14. Hip &Ridge (Frederick&Joplin)
TBP15001.4 FL18355-R4 Page 9 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify GREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
17---711111 TAMKO BUILDING PRODUCTS
(�AQ�' C R E E K Asphalt Shingles
TECHNICAL SERVICES, LLC
Vintage@ Hip&Ridge Basic Wind Speed (VLjt): Max. 194 mph
(Phillipsburg) Basic Wind Speed (Vasd): Max. 150 mph
Deck(HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 19132 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck(Non-HVHZ): In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min.7/16 in.OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min.slope: 2:12 and in accordance with FBC requirements.
Installation: Installed with 5 inch exposure in accordance with the FBC
and manufacturer's published installation instructions. The
direction of the exposed end shall be away from the
prevailing wind.
Direction of prevailing wind
Start 511 exposure
here—
S<here
tart
Figure I exposure
Fastener
Fastener
5-1/2"
Figure 2 1/411 Figure 3
Figure 15. Vintage@ Hip & Ridge (Phillipsburg)
TBP15001.4 FL18355-R4 Page 10 of 11
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
CREEK Asphalt Shingles
TECHNICAL SERVICES, LLC
LIMITATIONS
1) Fire Classification is not within the scope of this evaluation.
2) The roof deck and the roof deck attachment shall be designed by others to meet the minimum design loads
established for components and cladding and in accordance with FBC requirements.
3) The mean roof height shall be restricted to a maximum 33 ft in the HVHZ.
4) Classification to ASTM D 7158 applies to exposure B&C with a building mean roof height of 60-ft or less.
5) Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck
shall be checked for protrusion and corrected prior to underlayment application.
6) Shingles shall be installed starting at the eave in horizontal layers such that the laps shed water from the
deck.
7) Installation of the evaluated products shall comply with this report, the FBC, and the manufacturers
published application instructions. Where discrepancies exist between these sources, the more restrictive
and code compliant detail shall prevail.
8) All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61 G20-3.
COMPLIANCE STATEMENT
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code, 6th Edition(2017)as evidenced in the referenced documents submitted by the named manufacturer.
ttvilli 1111111111
CJ E N
.2017.09.25
No 74021 S
11 :31 :41
-04'00'
-33 STATE OF 441 Z
A' Zachary R.Priest, P.E.
0 R \9.--* ��
Florida Registration No.74021
Organization No.ANE11669
CERTIFICATION OF INDEPENDENCE
CREEK Technical Services, LLC does not have, nor will it acquire,a financial interest in any company manufacturing or distributing
products under this evaluation.
CREEK Technical Services,LLC is not owned,operated,or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R.Priest,P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
END OF REPORT
TBP15001.4 FL18355-R4 Page 11 of I I
This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK
Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use,or other product attributes that are not
specifically addressed herein.
FLapiak oaPARTNISM OF
Business & Professional Regulation Ij
rig-
BCIS Home I Log In I User Registration Hot Topics Submit Surcharge Stats&Facts Publications FBC Staff BCIS Site Map Links Search
I Folida
it 91 Product Approval
Iii —
a opr a USER:Public User
Product Approval Menu>Product or Aoplication Search>App >Application Detail
FL# FL15216-R3
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived 0
Product Manufacturer Owens Corning Roofing and Asphalt, LLC
Address/Phone/Email One Owens Corning Parkway
Toledo,OH 43645
(740) 321-6345
Greg.Keeler@owenscorning.com
Authorized Signature Eduardo Lozano
elozano@interwrap.com
Technical Representative Eduardo Lozano
Address/Phone/Email 32923 Mission Way
Mission, NON-US 00000
(778) 945-2891
elozano@interwrap.com
Quality Assurance Representative
Address/Phone/Emall
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
-3 Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who developed Robert Njeminen
the Evaluation Report
Florida License PE-59166
Quality Assurance Entity Intertek Testing Services NA,Inc. -QA Entity
Quality Assurance Contract Expiration Date 09/30/2019
Validated By John W. Knezevich, PE
:!-j' Validation Checklist-Hardcopy Received
Certificate of Independence FL15216 R3 COT 2017 01 COT Nleminen.pd
Referenced Standard and Year(of Standard) Standard Year
ASTM D1970(tear) 2015
ASTM D226 (physicals) 2009
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method I Option D
Date Submitted 10/10/2017
Date Validated 10/11/2017
Date Pending FBC Approval 10/15/2017
Date Approved 12/12/2017
Date Revised 04/20/2018
Summary of Products
I
FL# Model,Numb r or Name Description
15216.1 RhinoRoof Underiayments Synthetic roof underlayments
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL15216 R3 11 2017 10 FINAL ER INTERWRAP RHINOROOF FL15216-
Approved for use outside HVHZ:Yes R3.pLf
Impact Resistant: N/A Verified By: Robert Nieminen PE-59166
Design pressure: N/A Created by Independent Third Party: Yes
Other: See ER Section 5 for Limits of Use. Evaluation Reports
FL15216 R3 AE 2017 10 FINAL ER INTERWRAP RHINOROOF FL15216-
R3.pdf
Created by Independent Third Party: Yes
FN.-]I
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.�;myfight 2007-2013 State of Florida.::�nyacy tatement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.139S.-P6rsuant to Section
455.275(l),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address If they have
one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal
address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,
please click here.
Product Approval Accepts:
0 50—ow 99 M
Credit Card
Safe
Doc # 2018105372, OR BK 18374 Page 850, Number Pages : 1,
Recorded 05/03/2018 01 :23 PM, RONNIE FUSSELL CLERK CIRCUIT COURT DUVAL COUNTY
RECORDING $10 . 00
NOTICE OF COMMENCEMENT
(PREPARE IN DUPLICATE)
Permit No. Tax Folio No.see legal description
Slate of r1orida County of Duval
To whom It may concern;
The undersigned hereby Informs you that improvements will be made to certain real property,and in
accordancewith Section T13 ofthe Florida Statutes,the following Infori-nation Is stated In this NOTICE OF
COMMENCEMENT.
Legal description ofpropertybeing improved:09-2S-29E Ocean Village One-Condominium
Dwelling,Unfts23,25,20.29 Tax Folio ID's:169519-0144(23):16951"148(25);16951"i5D(26)
16951"150(29)
Address of property being improved:2233 Seminole Road Units 23, 25, 26,29
Atianfic Beach,FL 32233
General description of improvements:Reroof of each individual unit listed below
23,25,26,29
Owner Ocean Village Association,Inc c10 Marvin&Playd Really Inc.,
Address 1825-A North 3rd Street,daoksonAlle Beach,FL 32250
Owner's interest In site oftho improvement Presidant of Association,George Ridge
Fee Simple Titleholder(if other then owner)
Name
Address
Contractor Triton Roofing&Restoration,LLG
AddreSS460SR13N -Ste 100 1 StJohns.FFL=69
Phone No.904.0iM2112 Fax No.9D4.683.3823
Surety(if any)
Address Amount of bond
Phone No. Pax No.
Name and address of any person making a loan for the construction of the improvements.
Name
Address
Phone No. Fax No.
Name oi person within the State of Ronde,other than himself,designated by owner upon whom notices or other
documents may be served:
Name
Address
Phone No. Fax No.
In addition to himself,owner designates the following person to receive a copy of the Lienor's Notice as provided in
Section 713.1316(2)(b).Florida Statutes.(Fill in at Owners option).
Name
Address
Phone No, Fax No.
Expiration date of Notice of Commencement(the expirallon date Is one(1)year from the date ofrecording unlassa
different date IS Specified):
10 C49W
THIS SPACE FOR RFCORDFRIS USE ONLY OWNER
—DATE
CountyollOuval,State ofFlodda,haspedinnayJppeared
CpfiFtldg. harek2bv
hlniselll heraelt and affirms that all statements and declatat*��reln
are blis and accuraiel A-I'-N 990 of Fbffda
MY OMThslon EWMS 011MMI
CurnlWon No.GO 61M
ffq
N61ary Public"a,SUte a
My commission expi.res: j
PersonAlly K� or
Produced Identffication--k.! -1 wilo! mjW