1644 W PARK TERRACE - PERMIT ROOF18-0050 CITY OF ATLANTIC BEACH
800 SEMINOLE ROAD
ATLANTIC BEACH,FL 32233
INSPECTION PHONE LINE 247-5814
ROOF NON SHINGLE -
MUST CALL BY 4PM FOR NEXT DAY INSPECTION: 247-5814
PERMIT INFORMATION:
PERMIT NO: ROOF18-0050
Description: METAL ROOF
Estimated Value: 3600
Issue Date: 5/14/2018
Expiration Date: 11/10/2018
PROPERTY ADDRESS:
Address: 1644 W PARK TER
RE Number: 1720200164
PROPERTY OWNER:
Name: GRAMLING SCOTT R
Address: 1644 W PARK TER
ATLANTIC BEACH, FL 32233
GENERAL CONTRACTOR INFORMATION:
Name:
Address:
Phone:
Name: BIG FISH ROOFING INC
Address: 6821 N SOUTHPOINT DR APT 114 STEVEN SCOATES
JACKSONVILLE, FL 32216
Phone:
PERMIT INFORMATION:
Please see aftached conditions of approval.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF
COMMENCEMENT MAY RESULT IN YOU PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB
SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN
FINANCING9 CONSULT WITH YOUR LENDER OR AN ATTORNEY
BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
NOTICE: In addition to the requirements of this permit,,there may be additional restrictions
applicable to this property that may be found in the public records of this county, and there may
be additional permits required from other governmental entities such as water management
districts, state agencies, or federal agencies.
* A notice of Commencement is only required for work exceeding an estimated value of
$2,500. For HVAC work, a Notice of Commencement is only required when HVAC work
exceeds and estimated value of$7,500.
City of Atlantic Beach 'APPLICATION NUMBER
Building Department (To be assigned by the Building Department.;)
800 Seminole Road
Cis OL --
Atlantic Beach, Florida 32233-5445 CDC) 0
Phone(904)247-5826 - Fax(904)247-5845
E-mail: building-dept@coab.us Date routed: 4
Ulty web-site: hftp://vmw.coab.us 11
APPLICATION REVIEW AND TRACKING FORM
,**' /1- 4 Department review required Y ' No
Property Address: I (!�n
Applicant: EL a 'Rtz (4 Planning-&-Z-oning
Tree Administrator
Project: cz::�Ift C_ Ron r:7- Public Works
Public Utilities
Public Safety
Fire Services
,F(e fee $ Dept Simature
Other Agency Review or Permit Required Review or Receipt Date
of Permit Verified By
Florida Dept. of Environmental Protection
Florida Dept. of Transportation
St.Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
-APPLICATION STATUS
Reviewing Department First Review: KApproved. [-]Denied. [:]Not applicable
(Circle one.) Comments:
PLANNING &ZONING Reviewed by: Date:
TREE ADMIN. Second Review: FlApproved as revised. DDenied.v F]Not applicable
PUBLIC WORKS Comments:
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: EApproved as revised. E]Denied. E]Not applicable
Comments:
Reviewed by: Date:
Revised 05/19/2017
UrFICE COPY
Building Permit Application Updated 12/8/17
City of Atlantic Beach
800 Seminole Road,Atlantic Beach,FL 32233
Job Address: &W P Phone:(904)247-5826 Fax:(904)247-5845 —00SC)
ort 72rrae-& 32033 Permit Number: P- 00
Legal Description 3'1-51 09-..?S --Z-9,f 5eli) )X 0
& Mariha- Mi,V If kP(P '6 RE# /7 M6- 6 ZSI 3
Valuation of Work(Replacement Cost)$ 3 1 (g Q 0 Heated/CooledSF 251el Non-Heated/Cooled
• Class of Work(Circle one):(S)Addition Alteration Repair Move Demo Pool Window/Door
• Use of existing/pro posed structure(s)(Circle one): Commercial (:�Re:M�idential
• If an existing structure,is a fire sprinkler system installed?(Circle one): Yes oNd N/A
• Submit a Tree Removal Permit Application if any trees are to be removed or Affidavit of No Tree Removal
Describe in detail the type of work to be performed: .-rm,- C)lq ald rucj.7e, and /,rl-S��/
/W ruo e4cl
Florida Product Approval# 9 -7 for multiple products use product approval form
Property Owner Information
Name:-S-aW 6-ambi�j Address: 16W W. ROAC -Fel-- *henhic &-aM, AC 32Z,31
City 14+hA 542ch State EL zip 3 ZZ3.3 Phone !!�,Cc
E-Mail
Owner or Agent(If Agent,Power of Attorney or Agency Letter Required)
Contractor Information
Name of Compan- 19,A- 4fkh 4-Wei-47xi-A.0�_Qualifying Agent: *erl &Oak S
Addressbkzl (9-1 IN .11 CitY ;3Q-Cr&nVd1,if- State FL Zip 32-ZIU
Office Phone 90 Job Site/Contact Number 19044- 4�34 &/?-f3l 7
State Certification/Registration# P-eO-1330(1417 E-Mail_ 5�,2&1 60 16M acelilq-,ailyl
Architect Name&Phone#
Engineer's Name&Phone# 0*
Workers Compensation /-'Is as tv(-i ys-1 WZ ry
Exempt/Insurer/Lease Employees/Expiration Date
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulationg
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK,PLUMBING,SIGNS,
WELLS,POOLS, FURNACES,BOILERS,HEATERS,TANKS,and AIR CONDITIONERS,,etc,�Vbf i6E-..-in-'a-d"d-it-io-n-t-o-the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and
there may be additional permits�equired from other governmental entities such as water management districts,state agencies,or
iecleEal agencies"-
OWNER'S AFFIDAVIT:I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
REC; OUR NOTICE OF COMMENCEMENT.
,Z11-41"/4 . -
tbignature of Owner or AgAt) (Signature of Contractor)
(including contractor)
Signed and sworn to(or affir e )before rlie this 3 day of Signed and sworn to(o affirmed)0eftre me'this day of
maci 201 bv dIcA Lnro,—((,A-L-\ 6-, by blr&194 S�L-oo Xzf 5
(SigrQure of Notary) (Sign6ure of Notary)
Personally Known OR —Tersonally Known OR
STACY SIMMONS Pr
0,Pro-duced Identification Produced Identification STACY SIMMONS
Expires march 3,20
CMMIS*n#GG 182462 Commission#GG 1182462
Expires March 3,2022
a
car'!K"' BO(IM Thru Tmv Fain infttro�aNLmm--m.. 1--AffiAAW11121
OFFICE COPY
NOTICE OF COMMENCEMENT
State of Tax Folio No.
Countyof
To Whom It May Concern:
The undersigned hereby informs you that improvements will be made to certain real property, and in accordance with Section 713 of
the Florida Statutes,the following information is stated in this NOTICE OF COMMENCEMENT.
Legal Description of property being improved: -5c/- 51 0q --?-5- 2-9br
5 e�-k-io— Maccea, w-ic+ (o Lo -� )G 8)t b
Address of property being improved: )(-A(l Lki. PorL -Tifr- - )9:�hn4i-c SW-Ch- rt (191033
General description of improvements:
Owner:S:C )00,rJC rer- #/&)7��- Ict
&12CO 1 1-"01 Address: I&qq M)
-J
Owner's interest in site of the improvement:
Fee Simple Titleholder(if other than owner):
Name:
Contractor: k,-,, lc-k
or k
Address:-(9 W. 37 — IN at&nuille, R, (32-Z33
Telephone No.: Fax No:
Surety(if any)
Address: Amount of Bond$
Telephone No: Fax No:
Name and address of any person making a loan for the construction of the improvements
Name:
Address:
Phone No: Fax No:.
Name of person within the State of Florida, other than himself, designated by owner upon whom notices or other documents may be
served: Name:
Address:
Telephone No: Fax No:
In addition to himself, owner designates the following person to receive a copy of the Lienor's Notice as provided in Section
713.06(2)(b),Florida Statues. (Fill in at Owner's option)
Name:
Address:
Telephone No: Fax No:
Expiration date of Notice of Commencement(the expiration date is one (1)year from the date of recording unless a different date is
specified):
Doc#2018104759,OR BK 18373 Page 1293, )WNER
'K
Number Pages:I
Recorded 05/03/2018 09:50 AM, ned: Date: 6 /,3)/g
for
RONNIE FUSSELL CLERK CIRCUIT COURT DUVAL �eg e e t is day of in the Courfty of Duval,State
COUNTY
h
f Florida,has personally appeared Zj
RECORDING $10.00 �otary Public at Large,State of Florida,Couft(y of Duval. j
�y commission expires: 2-
?ersonally Known: or
-------- roduced Identification: fz>(--
19 PER waft
3&
Wal 09 V
ra A...!AW I
MILLENNIUM
METALS, INC. 01,FFIC E COPY
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS_1-877-357-7663 (ROOF)
FAX 904 358-8285
Net Coverage 16" Nominal
PANEL PROFILE
DIMPLE APROX.
EVERY 4" O.C.
STARTER/END
SLOT APROX. 2
FROM PANEL
ENM
0
z
2"±
3: -J Z
-Z :3 < 0
(L Z —
0
LU —
0 M t= z
0 C.) 0 0
Sidelap Detail Nailstrip Detail 0
P
Z
0
NOTES:
z
1. M-Seam Panels are only available with minor ribs to reduce oil
0 * W
canning. LL LL I= 2
C, LU LU
a. CC
W W M C3
2.Oil canning is inherent to all metal panels and therefore is not 5:
LU Z3 LU C3 UJ
U) LU
considered a manufacturers defect nor a warranty condition.
U, >W
3.Consult your contractor immediately if you need information cc
concering this condition.
Gauge Finishes Nominal Thickness ASTM & Grade Specifications
26 Acrylic Galvalume .0179 ASTM A-792 AZ55
26 PTD Galvalume .0179 ASTM A-792 AZ55
24 Acrylic Galvalume .0240 ASTM A-792 AZ55
PTD Galvalume is 70%Kynar 500 or Hylar 5000 PVDF Resin unless otherwise Indicated.
Millennium Metals Offers a Limited 25 year warranty on Painted Panels,20 year limited warranty on Mill Finished Acrylume Panels.
Please request warranty information from your distributor.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 1
MILLENNIUM
METALS,-.---JNC. OFFICE COPY
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904-358-8285
M-Seam Installation Instructions:
Panel Attachment: M-Seam recommended attachment is 8 on center along the edge of the nailer strip.
This attachment may not be suitable for all applications. Projects may require an engineer to evaluate
conditions such as mean height, exposure type, and roof configuration as indicated in ASCE 7-98 and
ASCE 7-02. Additional fasteners may be required along the end zones on the panel (eave, ridge, and
perimeter).
Pitch Alert: This product should not be used on applications less than a 2/12 pitch.
Roof Application:
Step 1: Make sure deck is even and square.
Step 2: Panel should begin on the gable end opposite of the prevailing wind. Begin with the receiving
edge of panel (female side) along the Gable (see Gable Rake Detail). The edge away from the Gable
should be the nailstnip. After checking that the panel is square to the eave, make sure the panel is
attached as indicated in panel attachment (see above) and also 2" from the leading and trailing end of
the panel on the nailstrip. The screw should be placed in the center of the nailstrip slot provided.
Sealant is recommended on applications less than a 3/12 pitch.
Step 3: After attaching the first panel completely, panel 2 should be snapped in place using a rubber
mallet. A minimum of I" overhang is recommended at the eave. Typical eave detail requires the use
of a hemming tool to hem the panel over the ED2 (detail has 1-1/2" overhang).
Install the remaining accessories. Millennium Metals offers a variety of products such as pipe boots,
butyl tape, and ventilation materials. Do not use copper or lead products in conjunction with M-Seam
as it will void the warranty.
ATTENTION INSTALLER: PLEASE REFER TO THE IMPORTANT NOTE SECTION OF THIS
MANUAL FOR SAFETY, STORAGE, OIL CANNING DISCLAIMER, AND SHAVING
DISCLAIMER PRIOR TO BEGINNING PROJECT.
Code requirements vary from area to area and job type as well as roof configuration. Job specific
engineering is not a service provided by Millennium Metals. Estimates/Takeoff s are provided at a
nominal fee for materials only. It is the sole responsibility of the customer to review the takeoff and
make any changes to the quantity, length or accessories he/she feels necessary. Millennium Metals
takes no responsibility as to the accuracy of the information provided.
M-Seam is a special order product and therefore is not returnable. Please verify all items prior to
ordering.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 2
MILLENNIUM
METALS3, INC. OFFICE COPY
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904 358-8285
Important Notes:
Millennium Metals recommends licensed roofing professionals to install our materials. Please
use gloves, glasses, and other protection when handling material to prevent injury. It is
necessary to inspect deck integrity to insure it is safe to walk on before beginning any work.
Millennium Metals recommends all installers follow the OSHA requirement for fall protection.
Never walk on materials when wet or when unsuitable weather conditions are present.
Storage:
Materials should be installed immediately. Any unused materials should be stored in a dry
place where moisture will not reach and penetrate bundles. Material should always be placed
on wood block to separate from the ground or concrete. Do not cover with plastic!!! Instead,
use loose canvas tarps so that air can circulate. Cut the bands so that the material can expand.
Millennium Metals warrants the material only. We do not offer weather tightness warranties.
Any such warranty is up to the contractor to include in their contract.
Decking:
Millennium Metals recommends the use of minimum 1/2" plywood or OSB Board attached in
accordance with code. The deck must be supported by an engineered truss system not to exceed
24" on center. A moisture barrier such as 30# felt or other ASTM approved underlayment
should be used over decking to control moisture. Metal should never come in direct contact
with green or pressure treated lumber as it will cause corrosion. If tin tabs are required to attach
felt it will be necessary to apply a 15# felt in the direction of the panel as an additional
separation barrier. M-seam is recommended on application with 2-1/2 / 12 or greater.
Oil Canning Disclaimer:
Oil canning is industry wide and inherit to all metal panels. It is more visible in designs with
flat spans as with this panel. Oil canning is a wavy appearance in the surface of the metal panel.
This slight distortion in no way effects the warranty nor is a reason for rejection or refusal.
Shavings Disclaimer:
When using fasteners to penetrate steel sheets the iron particles tend to go airborne and settle
on the sheet. It is necessary to remove these particles to prevent embedment and rust marks.
MILLENNIUM METALS IMC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 3
MILLENNIUM
METALS, INC. M-SEAM DETAIL LOCATIONS
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
N-es,
FAX 904 358-8285
SR-1
RC-1 0 GR-9
RC-1 5 RAKE EDGE
SW-3 RIDGE PAGE 8
cn SW-4 PAGE 6
c
00
c_ SIDEWALL
m
PAGE 10 TF-2
TRANSITION
0 PAGE 9
EW-3
> ENDWALL
m PAGE 11
z
HS-1
HIGH-SIDE EAVE
m
PAGE 7
PANEL PROFILE
AGE 1
ED-2 C"),
EAVE DRIP M
RC-1 0 PAGE 7 C).
_u SW-4 or Sw_3 PV 3 HIP
> SIDEWALL VALLEY
m PAGE 10 PAGE 9 PAGE 6
.41 —
MILLENNIUM
,' F F I C-�[L--'-� C 0 y
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904 358-8285
1. EAVE DRlP (EF-5 2. ENDWALL FLASHING (EW-3) 3. EXTENDED EAVE (ED-2 3. EXTENDED EAVE (ED-2R
PAINT 318,, PAINT
PAINT �4314 PAINT
K 2 1/*2"
11
K
5/8" 4 7,12 1 1/2" 1 1/2-
5/8" 5/8
1/2"
OVERHANG: 1 OVERHANG: 1-�"
4. GABLE RAKE (QE-9
4. GABLE RAKE (GR-9R 5. GAMBREL FLASHING (GF-2 6. HIGHSIDE EAVE (HS-1
714
5/8"> 11141
5/8"
/2" ></ 1/2"
5/81,
5/8">�� 1/2" /2"
7. HIP CAP (RC-10) 8. J-CHANNEL (JC-7 9. PREFORMED VALLEY (PV-3) 10. STEP SIDEWALL (SW-4
4-1/2" 9,
1-3/8"
1
Ll - 5/8'.
1-3/8" 2-7/8"'
11. TRANSITION FLASHING (TF-2 12. SIDEWALL FLASHING (SW-3 13. STEP RAKE (SR-1 14. COUNTER FLASHING (CF-1)
3" 1/2"
:00
6" 1-1/16"
3/4"
1/2" 5/8"
41/2"
1/2" 1/2& 3/4"
15. RIDGE CAP (RC-20 CLEA OFFSET CLEAT (CL-2 7-CLOSURE QC-1) REGLET FLASHlNQ (RF-1)
1/2"
CN 1-1/2"
2" 10
1 3/8-
FLASHING PROFILES
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 5
MILLENNIUM
METALS, INC. OFFICE COPY
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS_1-877-357-7663 (ROOF)
FAX 904 358-8285
STITCH SCREWS
@ 12" D.C., DO NOT OVERDRIVE
RIDGE CAP M—SEAM PANEL
VENTING
_Z 7
ZZ
7-7
f K:�/ -
30# FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE
VENTED RIDGE DETAIL RC- 15
M—SEAM PANEL
S.S. POP RIVETS
"Z" CLOSURE CUT TO FIT BETWEEN
PANEL, (3) #10-12 X 1- PANCAKE
ol HEAD SCREWS PER PANEL
CONT. BUTYL TAPE SEALANT
APPROVED SOLID SUBSTRATE
#30 FELT
ATTACHED PER CODE
HIP/RIDGE FLASHING
'4/
RIDGE CAP RC-10/RC-20
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 6
MILLENNIUM 0 F F I C'�Ec Cc Y'O P Y
METALS, INC.
10200 EAST ORT ROAD JACKSONVILLE, FL 32218
904-368-8
S66 WATTS 1-877-357-7663 (ROOF)
FAX 904-358-8285
M-SEAM HEMMED
SEE DETAIL FOR HEMMING
#10-12 X 1- PANCAKE PANEL PAGE 3
HEAD SCREWS @ 12" D.C.
M-SEAM PANEL
#30 FELT
ATTACHED PER CODE
+
APPROVED SOLID SUBSTRATE
CLEAT W/ #10-12 X 1"
PANCAKE HEAD SCREW @ 12" D.C.
FASCIA BOARD
EAVE FLASHING PANEL SHOWN SHORT TO DEPICT
EAVE DRIP DETAIL ED-2 DETAIL. MAKE IT FLUSH AND MAKE HOLE.
S.S. POP RIVETS
M-SEAM PANEL @ 12" O.C.
HIGH-SIDE EAVE
FLASHING
Z" CLOSURE CUT TO FIT BETWEEN
PANEL, (3) #10-12 X 1
PANCAKE HEAD SCREW PER PANEL
APPROVED SOLID
SUBSTRATE
#30 FELT
ATTACHED PER CODE
CLEAT W/
#10-12 X 1- PANCAKE
HEAD SCREWS @ 12" O.C.
CONT. BUTYL
TAPE SEALANT
HIGHSIDE EAVE DETAIL HS- 1
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 7
MILLENNIUM
METALS, INC. C-),FFICE COPY'
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904 358-8285
END
F D BEND
IEL
PANEL I" MIN.
CONT. BUTYL
TAPE SEALANT
STITCH SCREWS
0 12" O.C.
30# FELT ATTACHED PER CODE
STITCH SCREWS @ 12" D.C.
M-SEAM PANEL
CONT. BUTYL TAPE SEALANT
STEP GABLE FLASHING
APPROVED SOLID SUBSTRATE
STAR
FASCIA
CLEAT W/#10-12 X 1-
STEP GABLE RAKE DETAIL SR-1 PANCAKE HEAD SCREWS
END
FIELD BEND
PANEL 1" MIN.
CONT. BUTYL
TAPE SEALANT
"Z" CLOSURE
GABLE FLASHING
STITCH SCREWS
�O# FELT 0 12" D.C.
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE
M-SEAM PANEL
"Z" CLOSURE CUT TO FIT BETWEEN PANEL,
(3) #12 X 1 WHS PER PANEL
CONT. BUTYL TAPE SEALANT
START
FASCIA
CLEAT W/ #10-12 X 1-
PANCAKE HEAD SCREWS
GABLE RAKE DETAIL GR-9
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 8
MILLENNIUM
METALS, INC. OFF`ICE COPY'
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904 358-8285
M-SEAM PANEL
#30 FELT
ATTACHED PER CODE
-VALLEY FLASHING APPROVED SOLID SUBSTRATE
CLEAT SET IN BUTYL TAPE CONT. BUTYL
SEALANT W1 #10-12 X 1" TAPE SEALANT
PANCAKE HEAD SCREWS 6" O.C.
PREFORMED VALLEY DETAIL PV-3
OFFSET CLEAT SET IN
BUTYL TAPE SEALANT
W/ #10-12 X 1- PANCAKE
HEAD SCREWS @ 12" O.C.
TRANSITION
FLASHING
S.S. POP RIVETS
0 12" O.C.
CONT. BUTYL TAPE SEALANT
"Z" CLOSURE CUT TO FIT BETWEEN
PANEL, (3) #10-12 X 1- PANCAKE
SCREWS PER PANEL
M-SEAM PANEL
30# FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE
TRANSITION DETAIL
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 9
MILLENNIUM or-r-mi-, cior
y
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS 1-877-357-7663 (ROOF)
FAX 904_358-8285
SEALANT
CONT. BUTYL
SEALANT TAPE SEALANT
SURFACE-MOUNT
CONT. BUTYL TAPE COUNTER FLASHING
SEALANT SIDEWALL FLASHING
S.S. POP RIVET
COUNTER FLASHING @ 12" O.C.
"Z" CLOSURE CUT TO FIT
STEP SIDEWALL BETWEEN PANEL, (3) #12 X 1
FLASHING PANCAKE SCREWS PER PANEL
#30 FELT
ATTACHED
PER CODE
CONT. BUTYL TAPE
APPROVED SOLID SEALANT
SUBSTRATE #30 FELT
STITCH SCREWS ATTACHED PER CODE
@ 12" O.C. APPROVED SOLID
CONT. BLITYL TAPE SUBSTRATE
SEALANT M-SEAM PANEL
M-SEAM PANEL
SIDEWALL FLASHING DETAIL SW-3 & SW-4
SIDING/STUCCO
SEALANT
SEALANT
CONT. BLITYL
REGLET
TAPE SEALANT
FLASHING
FLASHING
SAW CUT CONT. BUTYL
TAPE SEALANT
SIDEWALL FLASHING
CONT. BUTYL
TAPE SEALANT
MASONARY WALL
STEP SIDEWALL
FLASHING
SIDEWALL COUNTER FLASHING OPTIONS
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 10
MILLENNIUM
METALS, INC. Ul"'FICE Copy
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS_1-877-357-7663 (ROOF)
FAX 904 358-8285
SEALANT-
CONT. BUTYL-
TAPE SEALANT
SURFACE MOUNT-
COUNTER FLASHING
HEADWALL FLASHING-
CAULK @ ALL SEAMS-
CONT. BUTYL TAPE SEALANT
"Z" CLOSURE CUT TO FIT BETWEEN
PANEL, (3) #10-12 X 1" PANCAKE
HEAD SCREWS PER PANEL
S.S. POP RIVETS
M-SEAM PANEL
5-7
APPROVED SOLID SUBSTRATE ell-111
#30 FELT ATTACHED PER CODE
ENDWALL DETAIL EW-3
SIDING/STUCCO
SEALANT
SEALANT
CONT. BUTYL
REGLET TAPE SEALANT
FLASHING
FLASHING
SAW CUT CONT. BUTYL
TAPE SEALANT
CONT. BUTYL Ile SIDEWALL FLASHING
TAPE SEALANT
MASONARY WALL
STEP SIDEWA L
FLASHI
ENDWALL COUNTER FLASHING OPTIONS
MILLENNUUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 11
MILLENNIUM
METALS, INC. 0)F Fi G E- C u,,j y
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
904-358-8366 WATTS_1-877-357-7663 (ROOF)
FAX 904 358-8285
PANEL HEMMING
7 7 --\\\\%\\
%\\
CAULK
CUT PANEL BACK 1 TO
CREATE HEM. USE HEMMING TOOL.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX:904-358-8285 SUBJECT TO CHANGE WITHOUT NOTICE 10/6/04 PAGE 12