320 MEALY DR - PERMIT ROOF18-0041 DWGSMILLENNIUM
METAL
INC.
10200 EASTPORT ROAD ACKSONVILLE, FL 32218
LOCAL 904-358-8366 WA TS 1 -877 -358 -Roof (7663)
FAX 904-358-828 MM12000.NET
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358>8,,285
MM12000.NET SUBJECT TO CHANGE WITHOUI NOTICE
0
MILLENNIUM
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MMI200O.NET
RIB PANEL.
INet Coverage 36" / Overall Width 38"
_
9" NOM. (t1/4")
I� '1
3/4"
PAGE 16
PANEL PROFILE
Sidelap Detail
OFFICE COPY
PITCH ALERT: THIS PRODUCT SHOULD NOT BE USED ON APPLICATIONS LESS THAN 3:12 PITCH WITHOUT A
SECONDARY UNDERLAYMENT SUCH AS PEEL & SEAL AND SIDE LAP SEALANT APPLIED TO
SIPHON CHANNEL. THE MINIMUM PITCH ALLOWANCE WITH THE SECONDARY UNDERLAYMENT
AND SIDE LAP SEALANT IS 2:12.
Specifications:
Gauge
Finishes
Nominal Thickness
ASTM & Grade Specifications
29
Galvanized
.0142
ASTM A-653 Grade 80 Structural Steel
29
PTD Galvanized *
.0142
ASTM A-755 Grade 80 Structural Steel
26
PTD Galvanized **
.0185
ASTM A-755 Grade 80 Structural Steel
29
Acrylic Galvalume
.0142
ASTM A-792 AZ55 Grade 80 Structural Steel
26
Acrylic Galvalume
.0185
ASTM A-792 AZ55 Grade 80 Structural Steel
PTD Material is siliconized polyester unless otherwise noted.
Millennium Metals Offers a Limited 40 year warranty on Painted Panels, 25 year limited warranty on Mill Finished Galvalume Panels
t Please request warranty information from your distributor.
\✓' * 29 colors: Red, White, Blue, Gray, Hunter Green, Stone, Brown, Charcoal, Tan, Ivory, Burgundy & Burnished Slate
`* 26 colors: Red, Reflective White, Gallery Blue, Gray, Hunter Green, Stone, Brown, Charcoal, Tan & Ivory
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663 REVISED 08109
FAX: 904-358-8285
MM1200O.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 1
Rib Panel Installation Instructions:
METALS, ZINC.
10200 EASTPORT ROAD JACKSONVI LE, FL 32218
LOCAL 904-358-8366 WATTS 1-87 -358-Roof (7663)
FAX 904-358-8285 MMI OOO.NET
RIB PANEL FASTENING RECOMMENDATIONS
INC.
Detail 1932" OSB BOARD OR PLYWOOD
LOCAL 904-358-8366 WATTS
Detail C
152" OSB BOARD OR PLYWOOD
FAX 904-358-8285
Roof Application:
Step 1: Make sure the deck is even and square. Millennium Metals recommends
accordance with code. The deck must be supported by an engineered truss syste
as 30# felt or other ASTM approved underlayment should be used over decking 1
contact with green or pressure treated lumber, as it will cause corrosion. If tin to
a 15# felt in the direction of the panel as an additional separation barrier.
Step 2: Install Eave Drips/Roof Edge and Valleys according to details.
eliminate water infiltration.
/m\ MILLENNIUM
Ie use of 1/2" plywood or OSB board attached in
not to exceed 24" on center. A moisture barrier such
control moisture. Metal should never come in direct
are required to attach felt it will be necessary to apply
to use inside closure strips between Eave and Panel to
Step 3: Panel placement should begin on the gable end opposite the prevailing wir d. Starter edge should be the lap edge. (Opposite of
Purlin Bearing Leg) After laying first panel, check for squareness. Panel 2 should be lapped over purlin bearing leg of panel 1 with the
lap edge. A minimum of 1" overhang is recommended at the eave. Alternative m thod of panel placement may begin in the center of the
roof. Often this method is used when the area to be covered is not divisible by 3' r traditional placement allows for a pipe flashing to
occur in a side lap. Endlaps must be a minimum of 12" and two strips of butyl seE lant tape is recommended 8" on the uphill side of the
lap to keep watertight.
Step 4: Fasten panel according to detail B or C based on approved solid substrate ��election. Detail C shows additional screws to be
spaced on each side of major ribs for all eaves, ridges, and endlaps.
Step 5: Any field cutting must be done with metal nibblers, metal snips, or blades designed for metal cutting. No cutting should be done
on the roof, as it will cause iron shavings to be spread and adhere to roof panels. Proper cutting should be done with the panels finished
side down. Do not use graphite, lead, or any other marking devices that may stain panel and void warranty.
Step 6: Install the remaining accessories such as pipe boots; rib profile vents, ridge caps, gable flashings, butyl sealant, caulks, and
closures are necessary to maintain watertight seals. Inspect screw fasteners to ins re that they are installed properly.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 2
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MMI2000.NET
SIDING APPLICATION
WALL
RIB PANEL
SCREWS, MINIMUM
#9 X 1-1/2" WOOD
FASTENER ® 8" O.C.
TRACK COVER TC -1
DOOR TRACK
DOORS
PANEL
RIB P
IINIMUM
SCF
/2" WOOD
#9 X
® 8" O.C.
FASTED
WALL
DRIP C
-AB
D-/ --w"
OPENING
DRIP CAP DETAIL DC -1
TRACK COVER DETAIL (TC -1) 'MILLENNIUM METALS DOES NOT
SELL DOORS OR DOORMATTS
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 15
SIDING APPLICATION
CORNER POST
SCREWS, MINIMUM #9 X
1-1/2" WOOD FASTENER
® 8" O.C.
POST COVER
C9LL
METALS,. INC.
10200 EASTPORT ROAD JA KSONVILLE, FL 32218
LOCAL 904-358-8366 WATT 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MM12000.NET
POST COVER - SEE CHART ABOVE FOR SIS ES
SIDING APPLICATION
WALL
APPROPRIATE FASTENER
8" O.C.
RIB PANEL
SCREWS, MINIMUM #9 X 1-1/2"
WOOD FASTENER ® 8" O.C.
DOUBLE ANGLE (DA -1)
OUTSIDE RIB CLOSURE
RIB PANEL
DOUBLE ANGLE (DA -1)
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
SUBJECT TO CHANGE WITHOUT NIOTICE
ITEM
A
B
PC -1
3Y2"
1Y2"
PC -2
5Y2"
1J'2"
PC -3
7"
1Y2"
PC -4
9"
1Y2"
PC -5
-Y-3"
COMPRESSION
PAGE 14
19
CORRECT
METALS,
INC.
EPDM MATERIAL
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
EPDM IS
VISIBLE AT
LOCAL 904-358-8366 NdATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MMI2000.NET
Step 7: Fasteners should penetrate deck material by '/4"
FASTENERS
CORRECT
TOO LOOSE
TOO TIGHT
EPDM MATERIAL
EPDM NOT AT
EPDM IS
VISIBLE AT
VISIBLE JOINT.
PANNED AND IS
WASHER.
NOT ENOUGH
PROTRUDING
FASTENER IS
COMPRESSION
BEYOND EDGE
PROPERTY
TO MAKE A SEAL.
OF FASTENER.
INSTALLED.
Aproximate Screw Chart
"%2" Plywood = 200 screws per square
%2" Plywood = 100 screws per square
33.17 Lineal Feet = 1 Square
Attention Installer: Please refer to the important notes section of this manual for safety, storage, oil canning disclaimer, and
shaving disclaimer prior to beginning this project.
Important Notes:
Code Requirements vary from project type and location. Millennium Metals recommends licensed roofing professionals to
install materials. It is the responsibility of the roofing contractor to meet all prescriptive requirements if not indicated in our
recommendations.
Safety when using metal materials is imperative. It is necessary to inspect deck integrity to insure it is safe to walk on before
beginning any work. Never walk on material when wet or unsuitable weather conditions are present. Millennium Metals
recommends the use of gloves and eye goggles when working handling materials. OSHA fall protection should be strictly
adhered to on all projects.
Job Specific engineering should be considered for any Florida application not installed according to Florida product testing.
Millennium Metals Inc has a third party engineer who can provide this documentation for a nominal fee. Millennium Metals
Inc. accepts no responsibility for the information provided.
Florida
The current product approval is available on
our website at mmi2000.net. Figure 2-1 and 2-2 indicate attachment for these approvals.
Fastener length for new construction should be a minimum the field of the project. The length of the fastener
should penetrate the plywood a minimum of a '/4".
Re -Roofing Over Shingles
If re -roofing over one layer of shingles with '/i" or 5/8" plywood and felt a minimum of a 2" fastener should be used.
A Limited Warranty is available on Acrylic Galvalume and Pre -painted materials. A copy of this warranty is available to
review at our website mmi2000.net. Failure to request warranty indicates customer accepts conditions stated within the
warranty. Millennium Metals warrants material only. Long life fasteners are required in warranty content. Please consult us
if you have any questions regaurding fastener selection. Watertight warranties are not available.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 3
MET �S, _ _INC.
10200 EASTPORT ROA JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358- 285 MMI200O.NET
Estimating materials is available through a third party. We
the sole responsibility of the customer/contractor to verify in
made prior to ordering.
Metal Roofing Materials are special order products and
materials have been produced.
Materials should not be stored in a place where moisture cat
installation is not possible, material should be placed on wood
elevated. The bands should be cut to allow material to expand
can circulate. Improper storage will void warranty.
Oil canning is a wavy appearance in the surface of the panel.
with flat surfaces. This slight distortion in no way effects the
Shavings are iron filings left from the cutting or drilling of sty
sheets. Failure to remove the particles will cause embedment
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
no responsibility for the accuracy of this information. It is
:)n. Changes to quantity, length, or accessories should be
not returnable. Cancellations will not be honored if
0
MILLENNIUM
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
Is LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
SIDING APPLICATION
RIB
tenetrate the bundles or covered with plastic. If immediate RAKE/CORNER
locks to separate from the ground or concrete with one end
A loose canvas tarp should be used to cover material so that air BUTYL
SCREWS, MINIMUM
1-1/2" WOOD FAS'
tis condition is inherit to all metal panels but visible in designs ® 8
irranty nor is reason for rejection or refusal.
materials. The iron particles tend to go airborne and settle on
the iron and rust marks.
SUBJECT TO CHANGE WITHOUT NOTICE
40
PAGE 4
INSIDE CORNER IS -1
WALL
BUTYL TAPE
RIB PANEL
RAKE/CORNER (CRT -1)
SCREWS, MINIMUM #9 X
1-1/2" WOOD FASTENER
® 8" O.C.
RAKE / CORNER GR -1 / CRT -2
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM1200O.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 13
ROOFING APPLICATION
2/12
USE APPROPRIATE ------
3/12
FASTENER 8" O.C.
4/12
108'
SCREWS, #9 X 1-1/2"
COUNTER FLASHING
(SPECIFY DIMENSION)
—/
WALL
ENDWALL FLASHING (EW -1)
—
SCREWS, #9 X 1-1/2" WOOD
FASTENER ® 8" O.C.
INSIDE CLOSURE
RIB PANEL
30# FELT ATTACHED
--
PER CODE
SEALANT
OUTSIDE RIB CLOSURE
---
APPROVED SOLID SUBSTRATE
OUTSIDE RIB CLOSURE
NIUM
M ETAL� ,I N C.
10200 EASTPORT ROAD JCKSONVILLE, FL 32218
LOCAL 904-358-8366 WAITS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
1
�GOGlP��G
�P
!�G
l�Jc�'C
END WALL_ FLASHING DETAIL EW -1
ROOFING APPLICATION
2/12
99'
3/12
104'
4/12
108'
SCREWS, #9 X 1-1/2"
WOOD
FASTENER ® 8"
O.C.
INSIDE CLOSURE
1<44/
BUTYL TAPE
.>;?r•.
SEALANT
OUTSIDE RIB CLOSURE
30# FELT ATTACHED
PER CODE
j
l
APPROVED SOLID
SUBSTRATE
i
TRANSITION
DETAIL (TF -1)
MILLENNIUM METALS INC.
TOLL FREE. 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
SUBJECT TO CHANGE
0
L
4
TRANSITION
FLASHING (TF -1)
RIB PANEL
ANGLE CONVERSION
2/12
99'
3/12
104'
4/12
108'
5/12
113'
6/12
117'
NOTICE PAGE 12
u
---------------------
Notes:
MILLENNIUM
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MMI200O.NET
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
M M12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 5
SUBJECT TO CHANGE WITHOUTIINOTICE
PAGE 6
ft
MILLENN
q1 METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI2000.NET
ROOFING APPLICATION
9
RIB PANEL PANEL
#30 FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE VALLEY FLASHING (PV -2),
CONT. BUTYL SCREWS, #9 x 1-1 /2"
TAPE SEALANT WOOD FASTENER ® 8" O.C. PV— 1
UNIVERSAL CLOSURE (OPTIONAL) ALTERNATE
PREFORMED VALLEY DETAIL PV-1/PV-2
ROOFING APPLICATI
SIDING TO BE APPLIED
OVER WALL FLANGE
(RIGLET OPTIONAL)
WALL
USE APPROPRIATE FASTENER
ATTACHED MINIMUM 8" O.C.
SIDEWALL FLASING (SW -1)
30# FELT, ATTACHED
PER CODE
SCREWS, #9 X 1 -1/2 -
WOOD FASTENER ® 8" O.C.
UNIVERSAL CLOSURE OR
PEEL & SEAL, 2" UP WALL
RIB PANEL
APPROVED SOLID SUBSTRATE
SIDEWALL FLASHING DETAIL (SW
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 11
c
0'
c)
M
J vh
W
O Z
(D
^
W n O
J O
JPO
_
Z
M rN
Z �
O n �
M
Y M
-Aococ"
W
J
in
Q M
(Lmo
Oma)
W
a �
Q CO l¢i
Wn
_
M
O
o
O O
SUBJECT TO CHANGE WITHOUTIINOTICE
PAGE 6
ft
MILLENN
q1 METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI2000.NET
ROOFING APPLICATION
9
RIB PANEL PANEL
#30 FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE VALLEY FLASHING (PV -2),
CONT. BUTYL SCREWS, #9 x 1-1 /2"
TAPE SEALANT WOOD FASTENER ® 8" O.C. PV— 1
UNIVERSAL CLOSURE (OPTIONAL) ALTERNATE
PREFORMED VALLEY DETAIL PV-1/PV-2
ROOFING APPLICATI
SIDING TO BE APPLIED
OVER WALL FLANGE
(RIGLET OPTIONAL)
WALL
USE APPROPRIATE FASTENER
ATTACHED MINIMUM 8" O.C.
SIDEWALL FLASING (SW -1)
30# FELT, ATTACHED
PER CODE
SCREWS, #9 X 1 -1/2 -
WOOD FASTENER ® 8" O.C.
UNIVERSAL CLOSURE OR
PEEL & SEAL, 2" UP WALL
RIB PANEL
APPROVED SOLID SUBSTRATE
SIDEWALL FLASHING DETAIL (SW
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 11
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358=8,885
MM12000.NET
METAL
IUM
INC.
10200 EASTPORT ROAD J CKSONVILLE, FL 32218
LOCAL 904-358-8366 WA TS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
i.,
SUBJECT .TO CHANGE WITHOUT NOTICE
PAGE 16
�kjp
METALS, INC. OFFICE COPY
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI2000.NET
RIB PANEL
Net Coverage 36 / Overall Width 38"
9" NOW (11/4")
3/4"
PANEL PROFILE
Sidelap Detail
PITCH ALERT: THIS PRODUCT SHOULD NOT BE USED ON APPLICATIONS LESS THAN 3:12 PITCH WITHOUT A
SECONDARY UNDERLAYMENT SUCH AS PEEL & SEAL AND SIDE LAP SEALANT APPLIED TO
SIPHON CHANNEL. THE MINIMUM PITCH ALLOWANCE WITH THE SECONDARY UNDERLAYMENT
AND SIDE LAP SEALANT IS 2:12.
Specifications:
Gauge
Finishes
Nominal Thickness
ASTM & Grade Specifications
29
Galvanized
.0142
ASTM A-653 Grade 80 Structural Steel
29
PTD Galvanized *
.0142
ASTM A-755 Grade 80 Structural Steel
26
PTD Galvanized **
.0185
ASTM A-755 Grade 80 Structural Steel
29
Acrylic Galvalume
.0142
ASTM A-792 AZ55 Grade 80 Structural Steel
26
Acrylic Galvalume
.0185
ASTM A-792 AZ55 Grade 80 Structural Steel
PTD Material is siliconized polyester unless otherwise noted.
Millennium Metals Offers a Limited 40 year warranty on Painted Panels, 25 year limited warranty on Mill Finished Galvalume Panels
Please request warranty information from your distributor.
29 colors: Red, White, Blue, Gray, Hunter Green, Stone, Brown, Charcoal, Tan, Ivory, Burgundy & Burnished Slate
** 26 colors: Red, Reflective White, Gallery Blue, Gray, Hunter Green, Stone, Brown, Charcoal, Tan & Ivory
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663 REVISED 08/09
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 1
Rib Panel Installation Instructions:
MILLENNIU
METAL
INC.
10200 EASTPORT ROAD ACKSONVILLE, FL 32218
LOCAL 904-358-8366 WA TS 1 -877 -358 -Roof (7663)
FAX 904-358-828 MMI2000.NET
RIB PANEL FASTENING RECOMMENDATIONS
INC.
Detail 1%2" OSB BOARD OR
LYWOOD
Detail C
1%32" OSB BOARD OR
PLYWOOD
Roof Application:
Step 1: Make sure the deck is even and square. Millennium Metals recon
accordance with code. The deck must be supported by an engineered tru
as 30# felt or other ASTM approved underlayment should be used over d
contact with green or pressure treated lumber, as it will cause corrosion.
a 15# felt in the direction of the panel as an additional separation barrier.
Step 2: Install Eave Drips/Roof Edge and Valleys according to details
eliminate water infiltration.
lends the use of/z" plywood or OSB board attached in
system not to exceed 24" on center. A moisture barrier such
king to control moisture. Metal should never come in direct
tin tabs are required to attach felt it will be necessary to apply
to use inside closure strips between Eave and Panel to
Step 3: Panel placement should begin on the gable end opposite the prevailing wind. Starter edge should be the lap edge. (Opposite of
Purlin Bearing Leg) After laying first panel, check for squareness. Panel 2 should be lapped over purlin bearing leg of panel 1 with the
lap edge. A minimum of 1" overhang is recommended at the eave. A] tei native method of panel placement may begin in the center of the
roof. Often this method is used when the area to be covered is not divisible by Y or traditional placement allows for a pipe flashing to
occur in a side lap. Endlaps must be a minimum of 12" and two strips of butyl sealant tape is recommended 8" on the uphill side of the
lap to keep watertight.
Step 4: Fasten panel according to detail B or C based on approved solids�Ibstrate selection. Detail C shows additional screws to be
spaced on each side of major ribs for all eaves, ridges, and endlal
Step 5: Any field cutting must be done with metal nibblers, metal snips,r blades designed for metal cutting. No cutting should be done
on the roof, as it will cause iron shavings to be spread and adhere to roof anels. Proper cutting should be done with the panels finished
side down. Do not use graphite, lead, or any other marking devices that I ay stain panel and void warranty.
Step 6: Install the remaining accessories such as pipe boots; rib profile vents, ridge caps, gable flashings, butyl sealant, caulks, and
closures are necessary to maintain watertight seals. Inspect screw fasten rs to insure that they are installed properly.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOU NOTICE
PAGE 2
L
MILLENNIUM
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MM12000.NET
XIMIIIIIIIII Ii� 1111111
SIDING APPLICATION
WALL
RIB PANEL
SCREWS, MINIMUM
#9 X 1-1/2" WOOD
FASTENER ® 8" O.C.
TRACK COVER TC -1
DOOR TRACK
DOORS
RIB PANEL
RIB P
, MINIMUM
SCF
—1/2" WOOD
#9 X
--R ® 8" O.C.
FASTEI`
ALL '
WALL
RIP (BD -1)
DRIP C
SLAB
Dlwn� nmvvn
OPENING
TRACK COVER DETAIL (TC -1) 'MILLENNIUM METALS DOES NOT
SELL DOORS OR DOORMATTS
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 15
SIDING APPLICATION
CORNER POST
SCREWS, MINIMUM #9 X
1-1/2" WOOD FASTENER
® 8" O.C.
POST COVER
MILLENNIUM
METALS. INC.
10200 EASTPORT ROAD JACSDNVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
POST COVER - SEE CHART ABOVE FOR SIZIES
L 1I
APPROPRIATE FASTENER
8" O.C.
RIB PANEL
SCREWS, MINIMUM #9 X 1 -1/2 -
WOOD FASTENER ® 8" O.C.
DOUBLE ANGLE (DA -1)
OUTSIDE RIB CLOSURE
RIB PANEL
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
1
SUBJECT TO CHANGE WITHOUT WTICE
ITEM
A
B
PC- 1
31'2
1Y2"
PC -2
5Y2"
1Y2"
PC -3
7"
1Y2"
PC -4
9"
12"
PC -5
3"
3"
N
LLENNIUM
METALS, I NC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI2000.NET
Step 7: Fasteners should penetrate deck material by '/4"
FASTENERS
CORRECT
TOO LOOSE
TOO TIGHT
Wip
_IIIL�
EPDM IS
EPDM MATERIAL
EPDM NOT AT
VISIBLE AT
VISIBLE JOINT.
PANNED AND IS
WASHER.
NOT ENOUGH
PROTRUDING
FASTENER IS
COMPRESSION
BEYOND EDGE
PROPERTY
TO MAKE A SEAL.
OF FASTENER.
INSTALLED.
Aproximate Screw Chart
'%i' Plywood = 200 screws per square
'%i" Plywood = 100 screws per square
33.17 Lineal Feet = 1 Square
Attention Installer: Please refer to the important notes section of this manual for safety, storage, oil canning disclaimer, and
shaving disclaimer prior to beginning this project.
Important Notes:
Code Requirements vary from project type and location. Millennium Metals recommends licensed roofing professionals to
install materials. It is the responsibility of the roofing contractor to meet all prescriptive requirements if not indicated in our
recommendations.
Safety when using metal materials is imperative. It is necessary to inspect deck integrity to insure it is safe to walk on before
beginning any work. Never walk on material when wet or unsuitable weather conditions are present. Millennium Metals
recommends the use of gloves and eye goggles when working handling materials. OSHA fall protection should be strictly
adhered to on all projects.
Job Specific engineering should be considered for any Florida application not installed according to Florida product testing.
Millennium Metals Inc has a third party engineer who can provide this documentation for a nominal fee. Millennium Metals
Inc. accepts no responsibility for the information provided.
Florida
The current product approval is available on
our website at mmi2000.net. Figure 2-1 and 2-2 indicate attachment for these approvals.
Fastener length for new construction should be a minimum the field of the project. The length of the fastener
should penetrate the plywood a minimum of a'/4".
Re -Roofing Over Shingles
If re -roofing over one layer of shingles with ''/2" or 5/8" plywood and felt a minimum of a 2" fastener should be used.
A Limited Warranty is available on Acrylic Galvalume and Pre -painted materials. A copy of this warranty is available to
review at our website mmi2000.net. Failure to request warranty indicates customer accepts conditions stated within the
warranty. Millennium Metals warrants material only. Long life fasteners are required in warranty content. Please consult us
if you have any questions regaurding fastener selection. Watertight warranties are not available.
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
PAGE 14 MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 3
METAL,'
10200 EASTPORT ROAD
LOCAL 904-358-8366
FAX 904-358-8
Estimating materials is available through a third party. We
the sole responsibility of the customer/contractor to verify in
made prior to ordering.
Metal Roofing Materials are special order products and
materials have been produced.
INC.
SONVILLE, FL 32218
1 -877 -358 -Roof (7663)
MMI200O.NET
no responsibility for the accuracy of this information. It is
3n. Changes to quantity, length, or accessories should be
not returnable. Cancellations will not be honored if
Materials should not be stored in a place where moisture can penetrate the bundles or covered with plastic. If immediate
installation is not possible, material should be placed on wood blocks to separate from the ground or concrete with one end
elevated. The bands should be cut to allow material to expand. A loose canvas tarp should be used to cover material so that air
can circulate. Improper storage will void warranty.
Oil canning is a wavy appearance in the surface of the panel.
with flat surfaces. This slight distortion in no way effects the
Shavings are iron filings left from the cutting or drilling of steel 1
sheets. Failure to remove the particles will cause embedment of t
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
condition is inherit to all metal panels but visible in designs
anty nor is reason for rejection or refusal.
erials. The iron particles tend to go airborne and settle on
iron and rust marks.
SUBJECT TO CHANGE WITHOUT NOTICE
SIDING APPLICATION
RIB
RAKE/CORNER
BUTYL
SCREWS, MINIMUM
1-1/2" WOOD FAS
® 8
MILLENNIUM
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
NSIDE CORNER IS -1
WALL
BUTYL TAPE
RIB PANEL
RAKE/CORNER (CRT -1)
SCREWS, MINIMUM #9 X
1-1/2" WOOD FASTENER
® 8" O.C.
RAKE / CORNER GR -11
r
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
PAGE 4 MM12000.NET
SUBJECT TO CHANGE WITHOUT NOTICE
PAGE 13
ROOFING APPLICATION
USE APPROPRIATE
FASTENER 8" O.C.
COUNTER FLASHING —/
(SPECIFY DIMENSION)
WALL
ENDWALL FLASHING (EW -1)
SCREWS, #9 X 1-1/2" WOOD
FASTENER ® 8" O.C.
RIB PANEL
30# FELT ATTACHED —�
PER CODE Via,
OUTSIDE RIB CLOSURE
APPROVED SOLID SUBSTRATE
METALS�, INC.
10200 EASTPORT ROAD JACSONVILLE, FL 32218
LOCAL 904-358-8366 WATT 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI200O.NET
1
O
P��OG\P�E
Q\�GXX
J5�
END WALL FLASHING DETAIL EW -1
ROOFING APPLICATION
\ x
tiX \i
SCREWS, #9 X 1-1/2- WOOD' X X,
FASTENER ® 8" O.C. 'X X z�X.
X
MSS
INSIDE CLOSUREf, ;
BUTYL TAPE Ifr
SEALANT
OUTSIDE RIB CLOSURE `
30# FELT ATTACHED
PER CODE I
APPROVED SOLID
SUBSTRATE
TRANSITION DETAIL (TF -1)
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
L
V
SUBJECT TO CHANGE WITHOUT NOTICE
4
TRANSITION
FLASHING (TF -1)
RIB PANEL
ANGLE CONVERSION
2/12
99'
3/12
104'
4/12
108'
5/12
113'
6/12
117'
�i
PAGE 12
MILLENNIUM
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
MMI200O.NET
Notes:
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
M M12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 5
U)
z
0
F—
U
V
I
W
W
z
CL
NW
1.1..
'
z'
6
m Z>
co
N w
M Q
Z �
ON
N T C
HZ0 �(
crIL
C
'1 ✓
LU
� LU
CC LU
m Q �.
CON�W
66(-121 (L
cc: d
J
J T
T < W
U)0l<
^ CL
VJ
J \�
llW��
V
W CL
W
J_
LL
0-0
W<
SUBJECT TO CHANGE WITHOUT NOTICE
MILLENN
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
qp FAX 904-358-8285 MM12000.NET
ROOFING APPLICATION
Z
RIB PANEL PANEL
PV -2
#30 FELT T
ATTACHED PER CODE vT.,
APPROVED SOLID SUBSTRATE VALLEY FLASHING (PV -2)
CONT. BUTYL SCREWS, #9 x 1-12"
TAPE SEALANT WOOD FASTENER ® 8" 1 .c. PV -1
UNIVERSAL CLOSURE (OPTIONAL) ALTERNATE
�_, PREFORMED VALLEY DETAIL PV-1/PV-2
ROOFING APPLICATION
SIDING TO BE APPLIED
OVER WALL FLANGE I/jfJ ffJJ fJ jI/ fj/ j�fj J jfj
(RIGLET OPTIONAL)
WALL
USE APPROPRIATE FASTENER
ATTACHED MINIMUM 8" O.C.
SIDEWALL FLASING (SW -1)
30# FELT, ATTACHED
PER CODE
SCREWS, #9 X 1 -1/2 -
WOOD FASTENER ® 8" O.C.
UNIVERSAL CLOSURE OR
PEEL & SEAL, 2" UP WALL
RIB PANEL
APPROVED SOLID SUBSTRATE
SIDEWALL FLASHING DETAIL (SW -1)
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
PAGE 6 M M12000.NET SUBJECT TO CHANGE WITHOUT NOTICE
PAGE 11
126191212 LeIVIA 2 2 RIAlmoril
U
GABLE VIEW
SIDING APPLICATION
TN ki I 111 L
METAL
10200 EASTPORT ROAD
LOCAL 904-358-8366 WA
FAX 904-358-828:
m
WINDOW JAMB
WALL GIRT
STD J CHANNEL
WALL WRAP OR INSULATION
SCREWS, #9 X 1 -1/2 -
WOOD FASTENER ® 8" O.C.
STANDARD J -CHANNEL
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
RIB PANEL
DETAIL JC -1
SUBJECT TO CHANGE
INC.
3ONVILLE, FL 32218
1 -877 -358 -Roo# (7663)
MMI200O.NET
ROOF VIEW
CONT. BUTYL
SEALANT TAPE
SCREWS, MIN. #9 X 1-1/2"
WOOD FASTENER ® 8" O.C.
#9 X 1-4" WOOD FASTENER
THROUGH BUTYL TAPE SEALAN
30# FELT ATTACHED PER CODE
RIB PANEL
GABLE FLASHING (GR -4)
APPROVED SOLID SUBSTRATE
FASCIA
SCREWS, M 1-1/2" WOOD
FASTENER
NOTICE
PAGE 10
A. J -CHANNEL (JC -1) PG.10
2-1/16-
P
00
i �----r
w
[M2fAvl=0J;il
= 1--3 -r 1- 3 � jP
L
L7
N N
(ED -1) (EE -3)
I. VENTED RIDGE (RC -6) PG.8
P
VENT DETAIL REQUIRES
VERSA VENT
MILLENNIUM
METALS, INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS 1 -877 -358 -Roof (7663)
FAX 904-358-8285 MMI2000.NET
B. GABLE TRIM (GR -4) PGAO
5/8"--{1 2�-5/16" p
I
/$"
Isl)
M. PREFORMED VALLEY (PV -1) PG.11
I?
1"
7/8"
I
N
/P
6-7/8"
X�— 6 1/2-
M.
/2"
P
N 7/8"
-1/4"
G. RIDGE CAP (RC -2) PG.8
ti X /P
io p
16
1 1 5/8"
r2 P
I
N
/P
r1-5/8"
2-1 /2"
P
r7 C112-
i
3/g"
P 3/4-
04
M-2. PREFORMED VALLEY (PV -2) PG.11 Q. HIGHSIDE EAVE (HS -1) PG.9 P. RAKE CORNER (CRT -2) PG.13
P 4-1/2" p
1 " 4-1 /2"
1/2-3/4-
t 0)
I x1-1/16"
.r /x
*ALL HEMS ARE % OF AN INCH 5/8"
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 7
ROOFING APPLICATION
RC -6
RIDGE CAP ------
SCREWS MINIMUM
#9 X 2 FOONDFASTENER
101
FLAT HIP/RIDGE CAP RC -2
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
MM12000.NET
METAL
INC.
10200 EASTPORT ROAD �ACKSONVILLE, FL 32218
LOCAL 904-358-8366 WA TS 1 -877 -358 -Roof (7663)
FAX 904-358-828 MMI2000.NET
VERSA VENT
10 PCS PER BOX
COVERS 50 FEET
OF RIDGE
L- 30# FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE
RIDGE ANGLE
CONVERSION
2/12
161'
3/12
152'
4/12
143'
5/12
134'
6/12
127'
OUTSIDE RIB CLOSURE OR
PEEL & SEAL CONTINUOUS
OVER PANELS AND RIDGE
/r
Y L
,('.RIB PANEL
SCREW, MINIMUM #9 X 1-1/2"
WOOD FASTENER ® 8" O.C.
APPROVED SOLID SUBSTRATE
#30 FELT
ATTACHED PER CODE
RC2
HIP RIDGE FLASHING
SUBJECT TO CHANGE WITHOUT NOTICE
PAGE 8
D'
ROOFING APPLICATION
EAVE
AS PER CODE
#30 FELT
ATTACHED PER CODE
APPROVED SOLID SUBSTRATE
METALS,
INC.
10200 EASTPORT ROAD JACKSONVILLE, FL 32218
LOCAL 904-358-8366 WATTS
1 -877 -358 -Roof (7663)
FAX 904-358-8285
M12000. NET
INSIDE RIB PANEL
CLOSURE
RIB PANEL
t, lr
YE
EF -3
FASCIA BOARD EAVE FLASHING (ED -1)
PANEL SHOWN SHORT TO DEPICT
DETAIL. MAKE IT FLUSH AND MAKE WHOLE.
HIGHSIDE EAVE
FLASHING
#9 X 1-1/2"
® 8" O.C.
?T—
( ATTACHED PER CODE SEAL
�HIGHSIDE SAVE DETAIL HS -1
MILLENNIUM METALS INC.
TOLL FREE: 1-877-358-7663
FAX: 904-358-8285
M M12000.NET SUBJECT TO CHANGE WITHOUT NOTICE PAGE 9