The URL can be used to link to this page

133 BEACH AVE RES ALT PERM S" RESIDENTIAL PERMIT PERMIT NUMBER CITY OF ATLANTIC BEACH RE:)'18-0376 800 SEMINOLE ROAD ISSUE): 1/29/2019 ATLANTIC BEACH. FL 32233 EXPIRES: 7/28/2019 MUST CALL INSPECTION • ! 914 + FOR NEXT D + NSPECTION. ALL • ' K MUST CONFORM TO THE CURRENT 6TH EDITION1 OF • D+ BUILDING CODE, ' AND OF ATLANTIC BEACH • OF ORDINA ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY. NOTI In addition to the requirements of this permit,there maybe additional restrictions applicabl;!to this property that may be found in the public records of this county,and there may be additional permits required ,rom other governmental entities such as water management districts,state agencies,or federal agencies. • : AC DRESS: Ar, • • WORK: 233 BEACH AVE RESIDENTIAL ALTERATION Interior Renovation and $200000.00 RESIDENTIAL Porch Enclosure USE `t' • tj E r 170213 0000 A-I LANTIC BEACH 1% Eastern Shores 1015 Atlantic Boulevard #240 Atlantic Beach F,_ 32233 Cin struction SCPOGINS WILLIAM C 2000 CHEROKEE DR NEPTUNE BEACH F 32266 WAF. Ih . � TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMEN-i MAY RESULT IN Y' UR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMEACEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LEND[ R OR AN ATTO7Y REFORE RECORDING YOUR NOTICE OF COMMENCEMENT. (Roll c stainer company must be on City approved list . Container cannot be placed on City right-of-way. DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT BUILDING PERMIT 455-0000-322-1000 0 $780.00 BUIL DING PLAN CHECK 455-0000-322-1001 0 $390.00 BU. AN EW RESUBMITTAL FOURTH AND 455-0000-322-1006 0 $100.00 CONSEQUENT PLA' ;VIEW RESUBMITTAL SECOND 455-0000-322-1006 0 $50.00 :G PLAN REVIEW RESUBMITTAL THIRD 455-0000-322-1006 0 $75.00 Issue; : 1/29/2019 1 of 2 rs RESIDENTIAL PERMIT PERMIT NUMBER r CITY OF ATLANTIC BEACH RES18-0376 8 ISSUED: 1/29/2019 00 SEMINOLE ROAD ATLANTIC BEACH. FL 32233 EXPIRES: 7/28/2019 STATE DBPR SURCHARGE 455-0000-208-0700 0 $20.93 STATE DCA SURCHARGE 455-0000-208-0600 0 $13.95 TOTAL: $1,429.88 Issued Cate: 1/29/2019 2 Of 2 City of Atlantic Beach APPLICATION NUMBER Building Department (To be assigned by the Building Department.) 800 Seminole Road f� Atlantic Beach, Florida 32233-5445 l w SO Phone(904)247-5826 • Fax(904)247-5845 22 E-mail: building-dept@coab.us Date routed: c� City web-site: http://www.coab.us APPLICATION REVIEW AND TRACKING FORM Property Address: ✓� Rezh rtment review required Yes No Buildin Applicant: sf ern �C)rPS g &Zoning Tree Administrator Project: l�"�vl L CSffhd 1 A Public Works JJ // r II Public Utilities Q a�ti PC `O S JY' S POf Gh.' Public Safety Fire Services Review fee $ Dept Signature Other Agency Review or Permit Required Review or Receipt Date of Permit Verified B Florida Dept. of Environmental Protection Florida Dept. of Transportation St. Johns River Water Management District Army Corps of Engineers Division of Hotels and Restaurants Division of Alcoholic Beverages and Tobacco Other: APPLICATION STATUS Reviewing Department First Review: ❑Approved. ffrDenied. ❑Not applicable L(Circle one.) Comments: DINGPL NTNG Reviewed by: Date: TREE ADMIN. Second Review: ❑Approved as revised. LfV]Deni . []Not applicable PUBLIC WORKS Comments: PUBLIC UTILITIES / Q� PUBLIC SAFETY Reviewed by: Date: FIRE SERVICES Third Review: ❑Approved as revised. KDenie . ❑Not applicable Comments: Reviewed by: Date: Revised 05/19/2017 �� V' To �0 OFFICE COPY Revision Request/Correction to Comments **ALL INFORMATION HIGHLIGHTED IN City of Atlantic Beach Building Department GRAY IS REQUIRED. Y 800 Seminole Rd, Atlantic Beach, FL 32233 Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#:t `csi —C)5X, Revision to Issued Permit OR 0 Corrections to Comments Date: 11/ l 3 ,� c Project Address: 4 "s{ Contractor/Contact Name: �� „� A Q--l(,f kA_ Contact Phone: �a�S� s ' Email: Description of Proposed Revision/Corrections: I I/V P_A y4^0 11,4 affirm the revision/correction to comments is inclusive of the proposed changes. (printed name) • �_No posed revision/corrections add additional square footage to original submittal? Yes (additional s.f.to be added: ) • __W' proposed revision/corrections add additional increase in building value to original submittal? No *Yes (additional increase in building va e:$ ) (contractor must sign if increase in valuation) *Signature of Contractor/Agent: 1�•31�c� (Office Use Only) W-Approved ❑ Denied ❑ Not Applicable to Department Permit Fe Due$ Revision/Plan Review Comments Department Review Required: Building ing Zoning Reviewed By Tree Administrator Public Works Public Utilities Public Safety Date Fire Services Updated 10/17/18 r ss, CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD �� / ATLANTIC BEACH, FL 32233 I (904) 247-5800 BUILDING REVIEW COMMENTS Date: 12/19/2018 Permit #: RES18-0376 Site Address: 133 BEACH AVE Review Status: denied REM 170213 0000 Applicant: Eastern Shores Construction Property Owner: SCROGINS WILLIAM C Email: leine@bellsouth.net Email: scrogmac@me.com Phone: 545.7878 Phone: 9044220673 THIS REVIEW IS ONE OF MULTIPLE DEPARTMENT REVIEWS. Revisions may not be submitted until ALL departments have completed their respective reviews. Revisions submitted MUST respond to EACH department review. Submittals that respond to only one or a few correction items will not be accepted. Correction Comments: 1. Have not received answer for review comment #2 from my first emailed review to contractor, involving the metal roof covering product approval # and instal lation/engineering for the roof assembly. Building Mike Jones Building Inspector/Plans Examiner City of Atlantic Beach 800 Seminole Road Atlantic Beach, FL 32233 904.247.5844 Email:mjones@coab.us d Sr Resubmittal Notes: 'ep A?VI f l,✓ Com kr p All revisions and changes shall clearly stand out from the rest of the drawing on the sheet as a revision by way of completely encircling the change with "clouding".The revision shall also be identified as to the sequence of revision by indicating a triangle with the revision sequence number within it and located adjacent to the cloud.The revision date and revision sequence number shall also be indicated in a conspicuous location in the title block for each sheet on which a revision for that sequence occurs. For projects still in the initial review stage and permit pending, all sheets with revisions shall be inserted into each set of drawings.The original sheets must be clearly marked "VOID" but are to be left within the set of drawings. Complete new sets of drawings will not be accepted. ADDITIONAL ITEMS MAY BE REQUIRED DEPENDING UPON NEW INFORMATION AND CLARITY OF FINAL PLANS SUBMITTED FOR REVIEW. Revision Request/Correction to Comments "ALL INFORMATION HIGHLIGHTED IN City of Atlantic Beach Building Department GRAY IS REQUIRED. 800 Seminole Rd, Atlantic Beach, FL 32233 Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#: fuSI ��K '' Revision to Issued Permit OR El Corrections to Comments Date: . 6 f Project Address: �-- Contractor/ .on a t Name: Contact Phone: q 0 Email: (�v\Ig -A Lz �I 1. t ^w Description of Proposed Revision/Corrections: ti .... n Fr 1 ! 2018 affirm the revision/correction to comments is inclusive of the pr6pos4cltes. (printed name) -1L Will pr ed revision/corrections add additional square footage to original submittal? Yes(additional s.f.to be added: ) • W' roposed revision/corrections add additional increas in building value to original submittal? _No *Yes (additional increase in building value: )(contractor must sign if increase in valuation) *Signature of Contractor/Agent: ,��,�� (Office Use Only) ❑ Approved L eniecl ❑ Not Applicable to Department Permit Fee Due$ S Revision/Plan Review Comments 4FJ Co kr rr\pvi 1►yen -Ziry 124,vtGty i S Kv4- lMe�,crr, rLi,eteed ,._,De ent Review Required: Building lannirig&Zoning Reviewed By Tree Administrator Public Works Public Utilities Public Safety Date Fire Services Updated10/17/18 CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD ATLANTIC BEACH, FL 32233 (904) 247-5800 BUILDING REVIEW COMMENTS Date: 12/10/2018 Permit#: RES18-0376 Site Address: 133 BEACH AVE Review Status: denied REM 170213 0000 Applicant: Eastern Shores Construction Property Owner: SCROGINS WILLIAM C Email: leine@bellsouth.net Email: scrogmac@me.com Phone: 9047314100 Phone: 9044220673 THIS REVIEW IS ONE OF MULTIPLE DEPARTMENT REVIEWS. Revisions may not be submitted until ALL departments have completed their respective reviews. Revisions submitted MUST respond to EACH department review. Submittals that respond to only one or a few correction items will not be accepted. Correction Comments: 1. Comment#1 in the initial plan review comments is still not met. 2. Comment#3 is still not met. No answer is not an answer. Please let me know if the metal roof is a go or not, or will a roofing contractor be pulling his own permit. 3. In speaking with Mr. Timothy Morgan today, there appears to be a mix up on picking up plans he has sitting in his office. Building Mike Jones Building Inspector/Plans Examiner City of Atlantic Beach 800 Seminole Road Atlantic Beach, FL 32233 904.247.5844 Email:mjones@coab.us Resubmittal Notes: All revisions and changes shall clearly stand out from the rest of the drawing on the sheet as a revision by way of completely encircling the change with "clouding".The revision shall also be identified as to the sequence of revision by indicating a triangle with the revision sequence number within it and located adjacent to the cloud.The revision date and revision sequence number shall also be indicated in a conspicuous location in the title block for each sheet on which a revision for that sequence occurs. For projects still in the initial review stage and permit pending, all sheets with t Revision Request/Correction to Comments "ALL INFORMATION ��?y HIGHLIGHTED IN City of Atlantic Beach Building Department GRAY IS REQUIRED. i * 800 Seminole Rd, Atlantic Beach, FL 32233 -1 Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#: 9CS '03 0 Revision to Issued Permit OR Corrections to Comments Date: Jz V,q Project Address: . rd � -16-C ..�1 Contractor/Contact Name: 'rL i �-R r • '3-► �..� r�+• Contact Phone: � �S ( s—' 1.`U� Email: Description of Proposed Revision/Corrections: ikb�to affirm the revision/correction to comments is inclusive of the proposed changes. (printed name) • Wi roposed revision/corrections add additional square footage to original submittal? No ❑✓ Yes(additional s.f.to be added: ) •eNo posedrevision/corrections add additional in rease in building value to original submittal? Q✓ *Yes(additional increase in building v lue:$ )(Contractor must sign if increase in valuation) *Signature of Contractor/Agent: (Office Use Only) ❑ Approved ❑ Denied ❑ Not Applicable to Department Permit Fee Due$ d•0 Revision/Plan Review Comments 6Ort Jlrve /a-+ CDmjVhpiyee-/j41yioy-010a" 110ye (r �t e S dt 4 G n /r-0 �� 12co If covr\ vhe-ri dL XW G k 1'Gv40 r Q� 2�e rtment Review Required: ildin P ng&Zoning Reviewed By Tree Administrator Public Works / p� Public Utilities L lG o Public Safety Date Fire Services Updated 10/17/18 c v ..1. CITY OF ATLANTIC BEACH 1 + s 800 SEMINOLE ROAD J ATLANTIC BEACH, FL 32233 (904) 247-5800 Dill, BUILDING REVIEW COMMENTS Date: 11/19/2018 Permit#: RES18-0376 Site Address: 133 BEACH AVE Review Status: denied REM 170213 0000 Applicant: Eastern Shores Construction Property Owner: SCROGINS WILLIAM C Email: leine@bellsouth.net Email: scrogmac@me.com Phone: 9047314100 Phone: 9044220673 THIS REVIEW IS ONE OF MULTIPLE DEPARTMENT REVIEWS. Revisions may not be submitted until ALL departments have completed their respective reviews. Revisions submitted MUST respond to EACH department review. Submittals that respond to only one or a few correction items will not be accepted. Correction Comments: 1. From the 2017 6"' Edition of the FBC-Existing Building Code, choose a method of construction compliance/alteration level and place this information on the structural Page SO.1 under DESIGN CRITERIA. 2 copies of this page needed. 2. Submit 2 copies of FORM R402-2017, Residential Building Thermal Envelope Approach. Energy Conservation. 3. Submit FL# and engineering for the installation for metal roof at front entry or verify that roofing contractor will be pulling separate permit for the installation of the metal roof. Building Mike Jones Building Inspector/Plans Examiner City of Atlantic Beach 800 Seminole Road Atlantic Beach, FL 32233 904.247.5 844 Email:mjones@coab.us Y �rnail�d Rrv�e�,. C�,•�• ��, -s tt-I.q-r �' �'r'0 Resubmittal Notes: All revisions and changes shall clearly stand out from the rest of the drawing on the sheet as a revision by way of completely encircling the change with "clouding".The revision shall also be identified as to the sequence of revision by indicating a triangle with the revision sequence number within it and located adjacent to the cloud.The revision date 0 and revision sequence number shall also be indicated in a conspicuous location in the title block for each sheet on which a revision for that sequence occurs. For projects still in the initial review stage and permit pending, all sheets with revisions shall be inserted into each set of drawings.The original sheets must be clearly marked "VOID" but are to be left within the set of drawings. Complete new sets of drawings will not be accepted. ADDITIONAL ITEMS MAY BE REQUIRED DEPENDING UPON NEW INFORMATION AND CLARITY OF FINAL PLANS SUBMITTED FOR REVIEW. r` Building Permit Application updated 12/8/17 City of Atlantic Beach 800 Seminole Road,Atlantic Beach,FL 32233 Phone:(904)247-5826 Fax:(904)247-5845 �/ Job Address: �-ZJ� �� 4-AU� Permit Number: s/o - Legal Description Lot -06oD g p Gyp `es v.+f cr` (!4 A- a Lc; 1 AT—h d, G� i.R E# 0 �/ 3 K� Valuation of Work(Replacement Cost) L'� U O 0 Heated/Cooled SF t toN D Non- Heated/Cooled_ • Class of Work(Circle one): New AdditionIteratio Repair Move Demo Pool Window/Door • Use of existing/proposed structure(s) (Circle one): Commercial esidentdal • If an existing structure, is a fire sprinkler system installed?(Circle one Yes : No 40 • Submit a Tree Removal Permit Application if any trees are to be removed or Affidavit of No Tree Removal Describe in detail the type of work to be performed: aeA0v � � � Florida Product Approval# for multiple products use product approval form Property Owner Information Name:WiLij W Jc %�'ll►�S Address: IR—WE City NEFTi tk-xE p ,lt State 19, zip3224,4, Phon 411_04, E-Mail - Owner or Age (If Agent, Power of Attorney or Agency Letter Required); l l IJPiM iY.�ilt�15 Contractor Information Name of Company: _4 Co 4 Qualifying Agent: 0064 = la-:6At.,^Lj �— Address ' u tS tbii 4-L- 7d4p City . ..1r'ySSc/�- state zip '32237 Office Phone o( -1`6-NS Job Site/Contact Number FA AAv State Certification/Registration# CA?L ti 'b")3 3 E-Mail l tit n z r�%l beL1<sa•�• e-_J1— Architect Name& Phone# dG 1 e4, -i Engineer's Name& Phone# o Wre- S � Workers CompensationQww Exemp /Insur r/Lease Employees/Expiration Date Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulationg construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING,SIGNS, WELLS, POOLS, FURNACES, BOILERS, HEATERS,TANKS,and AIR CONDITIONERS,etc. NOTICE: In addition to the requirements of this permit,there may be additional restrictions applicable to this property that may be found in the public records of this county, and there may be additional permits required from other governmental entities such as water management districts,state agencies, or federal agencies. OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER/OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT. (Signature of 96er or Aglu ) (Signature of Contractor) (including contractor) Signed and sworn to(or affirmed) before me this Z9 day of Signed and sworn to(or affirmV)before me this day of Oc1Fo6Q.r 201 , by o t n t^pY , Signature f otary) ;?o• ( ,naturF&0BEMI haLAARRERO My COMMISSION M FF 183912 r P€ EXPIRES:February27,2015 [ J Personally Known OR > Personally Known OR Bonded ThNr�otaryPurlcunaewm PA Produced Identification /[—] Produced Identification Type of Identification: )',k. SVZS °12-S '`2 70 0 Type of Identification: PERMITTED BUILDING DATA DO NOT WRITE BELOW — OFFICE USE ONLY Applicable Codes: 6" Edition (2017) Florida Building Code DEVELOPMENT SIZE: Habitable Space (ft')6�0/60, 0�(69q(Non-Habitable Space (ft') LAND INFORMATION: Zoning District Q �' Flood Zone X Minimum FFE BUILDING INFORMATION: Construction Type Occupancy Group S.►1f� / rni�� Number of Stories Z Max Occupancy Load Fire Sprinklers Required 1M)or CONDITIONS/ COMMENTS: Rev. 2.7.2018 Sid a --% h -� OFFICE COQ EASTER SHORES ftl 5e% CONSTRUCTION INC. 11/13/18 To: City of Atlantic Beach Building Department Re: 133 Beach Avenue SITE MANAGEMENT PLAN • The scope of this work is mostly the updating of interior finish work. • Two open air porches will be enclosed. Foundation and roof structures are already in place. • Dumpster and Portlet will be kept in a parking spot/drive on Beach Ave. *See attached. • No foundation work will be required for this project, no landscaping, nor will there be any driveway or right of way work. So, a silt fence will not be installed. Re ectfully submitted, Robert Leinenweber CBC058333 (11)3OWtI 3OU x S'1)+tjT,*M '3= 3AUVIUSiMPI raitloU '(SOMTC-9911 iWdWO M DNM=v cmrrrcrn0 m 1MY4 "M 111Nt)SY34 '6 IMI 1'S .i0 3MNYt1 31119 v WIN (MO 1'L - SIM 'I13v31g 3 fIYVtIW%SN Vp '16L0-LL9 NOILYIS 3011 vOd r4llr0 C,XPM%3 W 03DI(Own) 3Nn Kum mm waw 1 f "� ►its+csct alwtsr7 Q 'MUM (Ml OAVN) Dr'L1-NOR1t kM. e,y�. ttl'itRt►Y �a,¢eUw rRld .11 30 3015 Am W 3rpakv W= QMI 133tt1S 1St !O isv Du 461'Y+,a MOt1335!l M 153MttM VVWOM ONf*J SI 03$n >1Wt►4JoM 't; t0d W 3W MY .OMO. 3N1 HIM S3.-#NIWC OW SaM9lV3B 't VOWv� dD SW10M x%nd lk3mm aa►11 d0 191 3w'd ,11.1al KI 5RZ30 m ivouj0 ww 6v riA os s 93 un iwwd 1Vl1311130 3►u 'S 15t.191 t331bvw s3lluvls V"a w 'tom 1 AS A1NnW 'NAM MI uN3cQW lNoaj mo Tw A Atf►l wVg avftv2S '*U Sy MW JVVIS3 SM YOR1011 'A1Nf109 NAM .00 sMoo3Y :)new l/l)iRlr1O 3t11 JO 9cZ atw v64 '6; S30Yd I IY ) 'ST NOW IVW M 03Ol03311 Sr 3%n 10W1NOO 401SOtl3 3H1 '* 'HU H9nOWU vu 'LC 530vd A 1f10 � i N00lt ewn to Mauw3ti ONv ml Isn" a30rwu SY 3ml yy IMNM kOt1xwlsNOa 1visvw 341 No alsw 321v L% M.'19 It RI� 1 A3Atfh'. SSU 40 Ni►06 ION 3W lYW AILOdObd ' I SW I=A* 1riU AJWIW Butt 30 SaYO= Dolan 3ttl 1 M 0XWW39 NO ONINIOI A9 SLN3rMW W Gats NOt1D1WS3N 1 (LUU l7WWat*4 AVY401) 36 AVN 3112IU 'lrld N3d 3WI MOU.-AJriS3V Okia'1v1B ON 't omw wulu cwkvi Ava 1MW twist 3wavA 'A3WS AVO I0H Y St Situ 't I ; 133HIS 1SHU 'SUM + fc'L1L L . W" m-somye Uzi" wo WPA IT 11 ..ae.u•w 1 1 y i { t I r.n...aa 1... V pow WoI A.Lei 0 6 311IrvllMl A 1 ,.w \ 111 �ais7N 1 J < .. ` I �� 1» t► 1 + p,r +\ � ?ori ► lan ao loud xw co woo 1013V 4�1 r^1 � law smaion r.r+awn+sow- t i �I 4 low cos'Hots C sow foul►xt-f g r,1►s ) jMtOd 1.c.::a rou M who i Ali+JNtNN'>J ""r+r�.or OFFICE COPY KEVIN PARTEL COASTAL CONSULTANT 4230 MYRTLE STREET ST. AUGUSTINE, FL 32084 Mr. Scrogins 2000 Cherokee Drive Neptune Beach, FL 32266 October 22,2018 RE: REQUEST FOR FLDEP EXEMPTION (#133 BEACH AVENUE ATLANTIC BEACH,FL 32233) Dear Mr. Scrogins, Enclosed is a copy of all requested documents for FLDEP exemption approved and signed by Mr. Tony McNeal, FLDEP engineer supervisor, on October 16, 2018. I met in his office with him when he approved and signed off on the documents for the requested exemption. Should you have any questions please feel free to call (904-829-0851 or 904- 669-9357). 4Very ly ours, Kev n artel OFFICE COPY LL L 0 w E ti1'KlC rIKFS ISt. October 4, 2018 Mr. David Kriger State of Florida, Department of Environmental Protection 2600 Blair Stone Road Tallahassee, FI 32399 RE: Scroggins Residence 133 Beach Avenue Atlantic Beach, FL Mr. Kriger, No modifications to current foundation are required to complete proposed renovations within the existing footprint of the structure. E V11 �� . . . 0k,,,, Sincerely, 59527 No. E OF cc.€ �� gTAT 0 J. atthew Lowe, P.E. . .r L we Structures, Inc. \ ,\ "'Mry.tklilll\Ill\ v � b 11651 Central Pkwy, Suite 106 Jacksonville,FL 32224 Ph:904.992.0377 www.lowestructures.com OFFICE COPY NOTICE OF COMMENCEMENT State of FL- Tax Folio No. County of IOU V a To Whom It May Concern: The undersigned hereby informs you that improvements will be made to certain real property, and in accordance with Section 713 of the Florida Statutes,the following information is stated in this NOTICE OF COMMENCEMENT. Legal Dfesc . tion of property being improved: .�- 'j, Am C..i.,�,.- w ►�1.� ger �' F LA V1f° Ix k C'3 Address of property being improved: 4, 14,A-L 3 General description of improvements: 0/1.- u h 4,W iA A ` " -� Owner: (� 1W, Address: 2-000 C4W—PG M. Owner's interest in site of the improvement: 3� Fee Simple Titleholder(if other than owner): Name: Contractor: C�e ft, T�q (, Address: CAVC- tem U� MiA,. t+ 5L), 6, 3 � Telephone No.: ! 1-WA—$t'15 'tebZS Fax No: Surety(if any) Address: Amount of Bond$ Telephone No: Fax No: Name and address of any person making a loan for the construction of the improvements Name: Address: Phone No: Fax No: Name of person within the State of Florida, other than himself, designated by owner upon whom notices or other documents may be served: Name: Address: Telephone No: Fax No: In addition to himself, owner designates the following person to receive a copy of the Lienor's Notice as provided in Section 713.06(2)(b),Florida Statues. (Fill in at Owner's option) Name: Address: Telephone No: Fax No: Expiration date of Notice of Commencement(the expiration date is one(1)year from the date of recording unless a different date is specified): _ Doc#2018267391,OR BK 18594 Page 1894, Number Pages:1 INLY OWNER Recorded 11/13/2018 09:25 AM, RONNIE FUSSELL CLERK CIRCUIT COURT DUVAL COUNTY Signed: a,►M Date: ix) Z9 201 eb RECORDING $10.00 Before me this_�day of OG-1 in the County o Duval,State y A�,F JONI S TURNER Of Florida,has personally appeared 1nl►►L d n•, ,S( Notary Public at Large,State of Flprid County of Du al. i *MY COMMISSION#GG 095515 My commission expires: ��202 "�°e EXPIRES;Apol 18,2021 Personally Known: or ��FOF P`0��Bonded Thru Budget Notary SenAm Produced Identification:?1. 01- S 10 6 a 0026 00 0 ___ OFFICE COPY Scrogins Residence HVAC Load Calculations for Scrogins 133 Beach Ave Atlantic Beach, FL 32233 96--WtwM1Q RHVACR$SIDBNIIAL HVAC LOADS Prepared By: Joel Donovan Donovan AC 315 6th Ave S Jacksonville Beach, FL 32250 (904) 241 3785 Tuesday, November 20, 2018 Rhvac is an ACCA approved Manual J and Manual D computer program. Calculations are performed per ACCA Manual J 8th Edition, Version 2, and ACCA Manual D. Rhvac-Residential&Light Commercial HVAC Loads dlQElite Software Development,Inc. Home Enerqy Services Scrogins Residence Jacksonville, FL 32218 Page 2, Project Report General Pro iect Information_ Project Title. Scrogins Residence Designed By: Lexi Laughren Project Date: Tuesday, November 20, 2018 Client Name: Scrogins Client Address: 133 Beach Ave Client City: Atlantic Beach, FL 32233 Company Name: Donovan AC Company Representative: Joel Donovan Company Address: 315 6th Ave S Company City: Jacksonville Beach, FL 32250 Company Phone: (904) 241 3785 Design Data Reference City: Jacksonville, Florida Building Orientation: Front door faces West Daily Temperature Range: Medium Latitude: 30 Degrees Elevation: 26 ft. Altitude Factor: 0.999 Outdoor Outdoor Outdoor Indoor Indoor Grains Bulb Wet Bulb Rel-Hurn Rel.Hum Dry Bulb Difference Winter: 32 29.92 n/a n/a 70 n/a Summer: 95 77 45% 50% 75 46 ,-Check Fi ures I Total Building Supply CFM: 1,146 CFM Per Square ft.: 0.525 Square ft. of Room Area: 2,184 Square ft. Per Ton: 814 Volume (ft'): 21,838 Wuilding Loads _ - Total Heating Required Including Ventilation Air: 38,426 Btuh 38.426 MBH Total Sensible Gain: 27,457 Btuh 85 % Total Latent Gain: 4,737 Btuh 15 % Total Cooling Required Including Ventilation Air: 32,194 Btuh 2.68 Tons (Based On Sensible + Latent) Notes Rhvac is an ACCA approved Manual J and Manual D computer program. Calculations are performed per ACCA Manual J 8th Edition, Version 2, and ACCA Manual D. All computed results are estimates as building use and weather may vary. Be sure to select a unit that meets both sensible and latent loads according to the manufacturer's performance data at your design conditions. C:\...\Scrogins133BeachAve.rh9 Tuesday, November 20, 2018, 4:17 PM Rhva Residential dential&Light Commercial HVAC Loads Elite Software Development,Inc. Home Enerqy Services Scrogins Residence Jacksonville, FL 32218 - -Page 31 �I Miscellaneous Rr. System 1 Main Floor Outdoor Outdoor Outdoor Indoor Indoor Grains; Unput Data----,.— -_ Dry Bulb_- Wet-Bulb Rel.Hum Rel._Hum D Winter: 32 29.92 80% n/a 70 n/a Summer: 95 77 45% 50% 75 46.43 Main Trunk Runout� Calculate: Yes Yes Use Schedule: Yes Yes Roughness Factor: 0.00300 0.01000 Pressure Drop: 0.1000 in.wg./100 ft. 0.1000 in.wg./100 ft. Minimum Velocity: 650 ft./min 450 ft./min Maximum Velocity: 900 ft./min 750 ft./min Minimum Height. 0 in. 0 in. Maximum Height: 0 in. 0 in. Outside Air Data Winter Summer Infiltration Specified: 0.250 AC/hr 0.250 AC/hr 91 CFM 91 CFM Infiltration Actual: 0.250 AC/hr 0.250 AC/hr Above Grade Volume: X 21,838 Cu.ft. X 21,838 Cu.ft. 5,460 Cu.ft./hr 5,460 Cu.ft./hr X 0.0167 X 0.0167 Total Building Infiltration: 91 CFM 91 CFM Total Building Ventilation: 0 CFM 0 CFM ---System 1--- Infiltration &Ventilation Sensible Gain Multiplier: 21.98 = (1.10 X 0.999 X 20.00 Summer Temp. Difference) Infiltration &Ventilation Latent Gain Multiplier: 31.54 = (0.68 X 0.999 X 46.43 Grains Difference) Infiltration &Ventilation Sensible Loss Multiplier: 41.76 = (1.10 X 0.999 X 38.00 Winter Temp. Difference) Winter Infiltration Specified: 0.250 AC/hr(91 CFM) Summer Infiltration Specified: 0.250 AC/hr(91 CFM) Duct Load Factor Scenarios for System 1 T Attic Duct Duct Surface From We Description Location -_ Ceiling Leakage Insulation Area [T]MDD 1 Supply Main Attic 16B 0.09 6 968 No 1 Return Main Attic 16B 0.15 6 179 No C:\...\Scrogins133BeachAve.rh9 Tuesday, November 20, 2018, 4:17 PM Rhvac-Reslderltlal 8 Light Commercial HVAC Loads Elite Software Development,Inc.l Home Energy Services Scrogins Residence JI Jacksonville, FL 32218 Page 4- �Load Preview Report Ne � Se L Ne Se Sytgl CIg Sy Sy Du Scope To !fo Are Gai Gai Gai Loss CFM CFM CFM Si,, Building 2.68 814 2,184 27,457 4,737 32,194 38,426 485 1,146 1,146 Svstem 1 2.68 814 2,184 27,457 4,737 32,194 38,426 485 1,146 1,146 12x1 SuoDly Duct Latent 1,197 1,197 Return Dud 2,268 671 2,939 1,086 Zone 1 2,184 25,189 2,870 28,059 37,340 485 1,146 1,146 12x1 1-Owner Addition 289 6,641 583 7,224 7,046 92 302 302 3 2-Kitchen Addition 495 5,815 583 6,398 7,447 97 265 265 3- 3-Whole House 1,400 12,733 1,704 14,437 22,848 297 579 579 5- i C:\...\Scrogins133BeachAve.rh9 Tuesday, November 20, 2018,4:17 PM Rhvac-Residential&Light Commercial HVAC Loads Elite Software Development,Q7, Home Enerqy Services Scrogins Residence i Jacksonville.FL 32218 �1� Page 51 [uct Size Preview _ Room or IMinimu Maximu jRough Desig SP. Duc DH CI Ad. DuctSour� Ve � VelociFactU1LossVIq eFlow Flow 1 Flow Dud Name nA System 1 Supply Runouts Zone 1 1-Owner Addition Built-In 450 750 0.01 0.1 512.9 92_ 302 3 2-Kitchen Addition Built-In 450 750 0.01 0.1 646.8 97M 265 3- 3-Whole House Built-In 450 750 0.01 0.1 590.1 297M 579 5 Other Ducts in System 1 Supply Main Trunk Built-in 650 900 0.003 0.1 809 485 1,146 120 Summary System 1 Heating Flow: 485 Coolino Flow: 1146 C:\...\Scroginsl MeachAve.rh9 Tuesday, November 20, 2018, 4:17 PM Rhvac-Residential&Light Commercial HVAC Loads Elite Software Development,Inc. Home Enerqy Services Scrogins Residence Jacksonville,FL 32218 -- - Page 6 1 Total Building Summary Loads omponent rea Sen Lat Sen Total escnption _ duan Loss Gain Gain Gain 4A-6-o: Glazing-Double pane low-e (e = 0.20 or less), 160 2,132 0 4,454 4,454 high performance, operable window, a=0.05 on surface 2, any frame, u-value 0.35, SHGC 0.33 4A-5f-o: Glazing-Double pane low-e (e = 0.20 or less), 270 4,212 0 5,382 5,382 operable window, e=0.05 on surface 2, insulated fiberglass frame, outdoor insect screen with 50% coverage, light color blinds at 45° with 50% coverage, u-value 0.41, SHGC 0.31 13EB-Oocw: Wall-Block, framing with R-19 in 2 x 6 stud 470 1,142 0 494 494 cavity, open core, wood studs 13A-5ocs: Wall-Block, board insulation only, R-5 board 650 3,089 0 1,649 1,649 insulation, open core, siding finish 16B-30-. Roof/Ceiling-Under Attic with Insulation on Attic 783.8 953 0 1,379 1,379 Floor (also use for Knee Walls and Partition Ceilings), Vented Attic, No Radiant Barrier, Dark Asphalt Shingles or Dark Metal, Tar and Gravel or Membrane, R-30 insulation 22A-ph: Floor-Slab on grade, No edge insulation, no 156 8,050 0 0 0 insulation below floor, any floor cover, passive, heavy moist soil Subtotals for structure: 19,578 0 13,358 13,358 People: 0 0 0 0 Equipment: 0 900 900 Lighting: 0 0 0 Ductwork: 15,049 1,867 11,200 13,067 Infiltration: Winter CFM: 91, Summer CFM: 91 3,799 2,870 1,999 4,869 Ventilation: Winter CFM: 0, Summer CFM: 0 0 0 0 0 Total Building Load Totals: 38,426 4,737 27,457 32,194 Check Ficiures Total Building Supply CFM: 1,146 CFM Per Square ft.: 0.525 Square ft. of Room Area: 2,184 Square ft. Per Ton: 814 Volume (ft'): 21,838 Building Loads Total Heating Required Including Ventilation Air: 38,426 Btuh 38.426 MBH Total Sensible Gain: 27,457 Btuh 85 % Total Latent Gain: 4,737 Btuh 15 % Total Cooling Required Including Ventilation Air: 32,194 Btuh 2.68 Tons(Based On Sensible + Latent) Notes Rhvac is an ACCA approved Manual J and Manual D computer program. Calculations are performed per ACCA Manual J 8th Edition, Version 2, and ACCA Manual D. All computed results are estimates as building use and weather may vary. Be sure to select a unit that meets both sensible and latent loads according to the manufacturer's performance data at your design conditions. C:\...\Scrogins133BeachAve.rh9 Tuesday, November 20, 2018, 4:17 PM Rhvac-Residential&Light Commercial HVAC Loads Elite Software Development,Inc. Home Enerqv Services Scrogins Residence Jacksonville, FL_=18 Page 7 Building Pie Chart Infiltration 10% Floor 21% Roof 2% 0 Wall 11% Ductwork 39% Glass 17% Roof 4% Wall 7% Infiltration 15% Glass 31% Ductwork 41% Equipment 3% C:1...1Scrogins133BeachAve.rh9 Tuesday, November 20, 2018,4:17 PM Rhvac-Residential&Light Commercial HVAC Loads Elite Software Development,Inc Home Enerqy Services Scrogins Residence -Jacksonville,FL 32218 �1/ _ - Page 8 System 1 RoOITI Load Summary Htg Min Run Run Clg Clg Min Fact Room Area Sens Htg Duct Duct Sens Lat Clg Sys [No Name SF Btuh CFM Size Vel Btuh Btuh CFM CFM ---Zone 1--- 1 Owner Addition 289 7,046 92 3-6 513 6,641 583 302 302 2 Kitchen Addition 495 7,447 97 3-5 647 5,815 583 265 265 3 Whole House 1,400 22,848 297 5-6 590 12,733 1,704 579 579 Duct Latent 1,197 Return Duct 1,086 _ 2_268_ 671 System 1 total 2,184 38,426 485 _ __ -___ 27-457 _ 4,737 1,146 1,146 System 1 Main Trunk Size: 12x17 in. Velocity: 809 ft./min Loss per 100 ft.: 0.095 in.wg Cooling System Summary _ Cooling Sensible/Latent Sensible Latent Total Tons SSplit _ Btuh Btuh__- _ Btuh Net Required: 2.68 85%/ 15% 27,457 4,737 32,194 Actual: 2.82 75% /25% 25,350 8,450 33,800 Equipment Data - - Heating System Cooling System Type: Air Source Heat Pump Air Source Heat Pump Model: 25HCC536A*030* 25HCC536A*030* Indoor Model: FV4CN(B,F)003L Brand: CARRIER AIR CONDITIONING CARRIER AIR CONDITIONING Description: Air Source Heat Pump Air Source Heat Pump Efficiency: 8.5 HSPF 14.5 SEER Sound: 0 0 Capacity: 33,600 Btuh 33,800 Btuh Sensible Capacity: n/a 25,350 Btuh Latent Capacity: n/a 8,450 Btuh AHRI Reference No.: n/a 9157327 C:\...\Scrogins133BeachAve.rh9 Tuesday, November 20, 2018, 417 PM FORM R405-2017 FLORIDA ENERGY EFFICIENCY CODE FOR BUILDING CONSTRUCTION Florida Department of Business and Professional Regulation - Residential Performance Method Project Name: Scrogins Residence Builder Name: Street: 133 Beach Ave Permit Office: Duval City,State,Zip: Atlantic Beach, FL,32233 Permit Number: Owner: Scrogins Jurisdiction: 261000 Design Location: FL,Jacksonville County: Duval(Florida Climate Zone 2) 1. New construction or existing Addition 9. Wall Types(504.0 sqft.) Insulation Area 2. Single family or multiple family Single-family a. Concrete Block-Int Insul, Exterior R=19.0 504.00 ft2 b. N/A R= ft2 3. Number of units,if multiple family 1 c. N/A R= ft2 4. Number of Bedroom�Bedrms In Addition) 0(0) d. N/A R= ft2 5. Is this a worst case? No 10.Ceiling Types (300.0 sqft.) Insulation Area a. Under Attic(Vented) R=38.0 300.00 ft2 6. Conditioned floor area above grade(ft2) 300 b. N/A R= ft2 Conditioned floor area below grade(ft2) 0 c. N/A R= ft2 11.Ducts R ft2 7. Windows(160.0 sqft.) Description Area a. Sup:Attic, Ret:Main Floor,AH:Main Floor 6 40 a. U-Factor: Dbl, U=0.40 160.00 ft2 SHGC: SHGC=0.25 b. U-Factor: N/A ft2 12.Cooling systems kBtu/hr Efficiency SHGC: a.Central Unit 36.0 SEER:14.00 c. U-Factor: N/A ft2 SHGC: 13. Heating systems kBtu/hr Efficiency d. U-Factor: N/A ft2 a. Electric Heat Pump 36.0 HSPF:8.50 SHGC: Area Weighted Average Overhang Depth: 5.750 ft. Area Weighted Average SHGC: 0.250 14. Hot water systems-None required 8. Floor Types (300.0 sqft.) Insulation Area a. Cap:N/A a.Slab-On-Grade Edge Insulation R=0.0 300.00 ft2 b. Conservation features EF:0.000 b. N/A R= ft2 c. N/A R= ft2 15.Credits Pstat Glass/Floor Area: 0.533 Total Proposed Modified Loads: 12.05 PASS Total Baseline Loads: 12.20 1 hereby certify that the plans and specifications covered by Review of the plans and 04TNE ST4 this calculation are in compliance with the Florida Energy specifications covered by this Code. calculation indicates compliance � ,, with the Florida Energy Code. PREPARED BY: __ Before construction is completed =- -- DATE: 11/20 Q1$_ this building will be inspected for a compliance with Section 553.908 I hereby certify that thi uilding, as designed, is in compliance Florida Statutes. with the Florida Ener C COp WIE�v OWNER/AGENT: BUILDING OFFICIAL: DATE: UL DATE: -t Compliance requires certification by the air handler unit manufacturer that the air handler enclosure qualifies as certified factory-sealed in accordance with R403.3.2.1. Compliance requires an Air Barrier and Insulation Inspection Checklist in accordance with R402.4.1.1 and this project requires an envelope leakage test report with envelope leakage no greater than 4.72 ACH50(R402.4.1.2). 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 1 of 4 FORM R405-2017 INPUT SUMMARY CHECKLIST REPORT PROJECT Title: Scrogins Residence Bedrooms: 0 Address Type: Street Address Building Type: User Conditioned Area: 300 Lot# Owner Name: Scrogins Total Stories: 2 Block/Subdivision: #of Units: 1 Worst Case: No PlatBook: Builder Name: Rotate Angle: 0 Street: 133 Beach Ave Permit Office: Duval Cross Ventilation: County: Duval Jurisdiction: 261000 Whole House Fan: City,State,Zip: Atlantic Beach, Family Type: Single-family FL, 32233 New/Existing: Addition Comment: CLIMATE Design Temp Int Design Temp Heating Design Daily Temp V Design Location TMY Site 97.5% 2.5% Winter Summer Degree Days Moisture Range FL,Jacksonville FL—JACKSONVILLE—INT 32 93 70 75 1281 49 Medium BLOCKS Number Name Area Volume 1 Blockl 300 3000 SPACES Number Name Area Volume Kitchen Occupants Bedrooms InfillD Finished Cooled Heated 1 Main Floor 300 3000 Yes 0 0 1 Yes Yes Yes FLOORS # Floor Type Space - Peri-meter R-Value Area Tile Wood Carpet 1 Slab-On-Grade Edge Insulatio Main Floor 64ft 0 300 ft2 0.4 0 0.6 ROOF / Roof Gable Roof Rad Solar SA Emitt Emitt Deck Pitch �/ # Type Materials Area Area Color Barr Absor. Tested Tested Insul. (deg) 1 Hip Metal 316 ft2 0 ft2 Unfinishe N 0.96 No 0.7 No 0 18.4 / ATTIC V # Type Ventilation Vent Ratio(1 in) Area RBS IRCC 1 Full attic Vented 300 300 ft2 N N CEILING # Ceiling Type Space R-Value Ins Type Area Framing Frac Truss Type 1 Under Attic(Vented) Main Floor 38 Blown 300 ft2 0.11 Wood 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev.1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 2 of 4 FORM R405-2017 INPUT SUMMARY CHECKLIST REPORT WALLS / Adjacent Cavity Width Height Sheathing Framing Solar Below �# Omt - To ----Wall-Type Space_ R-Value -Ft In Ft In Area R-Value Fraction-- 1 N Exterior Concrete Block-Int InsuMain Floor 19 9 0 8 0 72.0 ft2 0 0 0.8 0 2 E Exterior Concrete Block-Int InsuMain Floor 19 16.5 0 8 0 132.0 ft2 0 0 0.8 0 3 S Exterior Concrete Block-Int InsuMain Floor 19 6 0 8 0 48.0 ft2 0 0 0.8 0 4 S Exterior Concrete Block-Int InsuMain Floor 19 9 0 8 0 72.0 ft2 0 0 0.8 0 5 E Exterior Concrete Block-Int InsuMain Floor 19 16.5 0 8 0 132.0 ft2 0 0 0.8 0 6 N Exterior Concrete Block-Int InsuMain Floor 19 6 0 8 0 48.0 ft2 0 0 0.8 0 WINDOWS Orientation shown is the entered,Proposed orientation. Wall Overhang V # Omt ID Frame Panes NFRC U-Factor SHGC Imp Area Depth Separation Int Shade Screening 1 N 1 Vinyl Low-E Double Yes 0.4 0.25 N 15.0 ft2 1 ft 0 in 1 ft 0 in None None 2 E 2 Vinyl Low-E Double Yes 0.4 0.25 N 45.0 ft2 1 ft 0 in 1 ft 0 in None None 3 S 3 Vinyl Low-E Double Yes 0.4 0.25 N 20.0 ft2 20 ft 0 in 1 ft 0 in None None 4 S 4 Vinyl Low-E Double Yes 0.4 0.25 N 15.0 ft2 1 ft 0 in 1 ft 0 in None None 5 E 5 Vinyl Low-E Double Yes 0.4 0.25 N 45.0 ft2 1 ft 0 in 1 ft 0 in None None 6 N 6 Vinyl Low-E Double Yes 0.4 0.25 N 20.0 ft2 20 ft 0 in 1 ft 0 in None None INFILTRATION # Scope Method SLA CFM 50 ELA EgLA ACH ACH 50 1 Wholehouse Proposed ACH(50) .0003 236.1 12.96 24.37 .1628 4.7214 HEATING SYSTEM # System Type Subtype Efficiency Capacity Block Ducts 1 Electric Heat Pump/Existing/c None HSPF:8.5 36 kBtu/hr 1 sys#1 COOLING SYSTEM # System Type Subtype Efficiency Capacity Air Flow SHR Block Ducts 1 Central Unit/Existing/confirme None SEER: 14 36 kBtu/hr 1080 cfm 0.75 1 sys#1 SOLAR HOT WATER SYSTEM FSEC Collector Storage Cert # Company Name System Model# Collector Model# Area Volume FEF ft2 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 3 of 4 FORM R405-2017 INPUT SUMMARY CHECKLIST REPORT DUCTS —Supply— —Return— Air CFM 25 CFM25 HVAC# V # Location R-Value Area Location Area Leakage Type Handler TOT OUT QN RLF Heat Cool 1 Attic 6 40 ft' Main Floor 10 ft2 Default Leakage Main Floor (Default) (Default) 1 1 TEMPERATURES Programable Thermostat:Y Ceiling Fans: CoolingJan Feb Mar Apr Ma rl Jun X Jul Au X]Se Oct [ ]Nov Dec HeatinHJan HFeb MMar f r f j May Jun f Jul n Au ]Sep Oct [X]Nov DecVentin Jan Feb Mar [X] r [ Ma Jun [ Jul Aug [ ]]Se [X]Oct [X]Nov Dec Thermostat Schedule: HERS 2006 Reference Hours Schedule Type 1 2 3 4 5 6 7 8 9 10 11 12 Cooling(WD) PM 80 80 78 78 78 78 78 78 78 78 78 78 Cooling(WEH) AM 78 78 78 78 78 78 78 78 78 78 78 78 PM 78 78 78 78 78 78 78 78 78 78 78 78 Heating(WD) AM 66 66 66 66 66 68 68 68 68 68 68 68 PM 68 68 68 68 68 68 68 68 68 68 66 66 Heating(WEH) AM 66 66 66 66 66 68 68 68 68 68 68 68 PM 68 68 68 68 68 68 68 68 68 68 66 66 MASS -- Mass Type Area Thickness Furniture Fraction Space Default(8 lbs/s .ft. 0 ft' 0 ft 0.3 Main Floor 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev.1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 4 of 4 2017 -AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA TABLE 402.4.1.1 AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA Project Name: Scrogins Residence Builder Name: Street: 133 Beach Ave Permit Office: Duval City,State,Zip: Atlantic Beach,FL,32233 Permit Number: Y U Owner: Scrogins Jurisdiction: 261000 w _ Design Location: FL,Jacksonville U COMPONENT AIR BARRIER CRITERIA INSULATION INSTALLATION CRITERIA General A continuous air barrier shall be installed in the building envelope. Air-permeable insulation shall The exterior thermal envelope contains a continuous air barrier. not be used as a sealing material. requirements Breaks or joints in the air barrier shall be sealed. The air barrier in any dropped ceiling/soffit shall be aligned with The insulation in an dropped ceiling/soffit Ceiling/attic the insulation and an gaps in the air barrier shall be sealed. y pp y g p shall be aligned with the air barrier. Access openings,drop down stairs or knee wall doors to unconditioned attic spaces shall be sealed. Walls The junction of the foundation and sill plate shall be sealed. Cavities within comers and headers of frame walls The junction of the top plate and the top of exterior walls shall be shall be insulated by completely filling the cavity sealed. with a material having a thermal resistance of R-3 Knee walls shall be sealed. per inch minimum. Exterior thermal envelope insulation for framed walls shall be installed in substantial contact and continuous alignment with the air barrier. Windows, skylights The space between window/doorjambs and framing,and and doors skylights and framing shall be sealed. Rim joists Rim joists shall include the air barrier. Rim joists shall be insulated. Floors The air barrier shall be installed at any exposed edge of Floor framing cavity insulation shall be installed to (including insulation. maintain permanent contact with the underside of above-garage subfloor decking,or floor framing cavity insulation and cantilevered shall be permitted to be in contact with the top side floors) of sheathing,or continuous insulation installed on the underside of floor framing and extends from the bottom to the top of all perimeter floor framing members. Crawl space walls Exposed earth in unvented crawl spaces shall be covered with Where provided instead of floor insulation,insulation a Class I vapor retarder with overlapping joints taped. shall be permanently attached to the crawlspace Shafts, penetrations Duct shafts,utility penetrations,and flue shafts opening to exterior or unconditioned space shall be sealed. Batts in narrow cavities shall be cut to fit,or narrow Narrow cavities cavities shall be filled by insulation that on installation readily conforms to the available cavity spaces. Garage separation Air sealing shall be provided between the garage and conditioned spac as. Recessed lighting Recessed light fixtures installed in the building thermal envelope Recessed light fixtures installed in the building shall be sealed to the drywall. thermal envelope shall be air tight and IC rated. Plumbing and wiring Batt insulation shall be cut neatly to fit around wiring and plumbing in exterior walls,or insulation that on installation readily conforms to available space shall Shower/tub The air barrier installed at exterior walls adjacent to showers and Exterior walls adjacent to showers and tubs shall on exterior wall tubs shall separate them from the showers and tubs. be insulated. Electrical/phone box or The air barrier shall be installed behind electrical or communication exteriorwalls boxes or air-sealed boxes shall be installed. HVAC register boots HVAC register boots that penetrate building thermal envelope shall be sealed to the sub-floor or drywall. Concealed When required to be sealed,concealed fire sprinklers shall only be sprinklers sealed in a manner that is recommended by the manufacturer. Caulking or other adhesive sealants shall not be used to fill voids between fire sorinkler cover plates and walls o L a. In addition, inspection of log walls shall be in accordance with the provisions of ICC-400. 11/20/2018 4:26 PM EnergyGaugeO USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 1 of 1 2017 EPL DISPLAY CARD ENERGY PERFORMANCE LEVEL (EPL) DISPLAY CARD ESTIMATED ENERGY PERFORMANCE INDEX*= 99 The lower the Energy Performance Index, the more efficient the home. 1. New home or, addition 1. Addition 12. Ducts, location & insulation level a) Supply ducts R 6.0 2. Single-family or multiple-family 2. Single-family b) Return ducts R 6.0 c)AHU location Main Floor 3. No. of units (if multiple-family) 3. 1 4. Number of bedrooms 4. 0 13. Cooling system: Capacity 36.0 a) Split system SEER 5. Is this a worst case?(yes/no) 5. No b) Single package SEER c) Ground/water source SEER/COP 6. Conditioned floor area (sq. ft.) 6. 300 d) Room unit/PTAC EER e) Other 14.0 7. Windows, type and area a) U-factor:(weighted average) 7a. 0.400 b) Solar Heat Gain Coefficient(SHGC) 7b. 0.250 14. Heating system: Capacity 36.0 c)Area 7c. 160.0 a) Split system heat pump HSPF b) Single package heat pump HSPF 8. Skylights c) Electric resistance COP a) U-factor:(weighted average) 8a. NA d) Gas furnace, natural gas AFUE b) Solar Heat Gain Coefficient(SHGC) 8b. NA e) Gas furnace, LPG AFUE f) Other 8.50 9. Floor type, insulation level: a) Slab-on-grade (R-value) 9a. 0.0 b)Wood, raised (R-value) 9b. 15. Water heating system c) Concrete, raised (R-value) 9c. a) Electric resistance EF b) Gas fired, natural gas EF 10. Wall type and insulation: c) Gas fired, LPG EF A. Exterior: d) Solar system with tank EF 1. Wood frame (Insulation R-value) 10A1. e) Dedicated heat pump with tank EF 2. Masonry (Insulation R-value) 10A2. 19.0 f) Heat recovery unit HeatRec% B. Adjacent: g) Other 1. Wood frame (Insulation R-value) 1061. 2. Masonry (Insulation R-value) 1062. 16. HVAC credits claimed (Performance Method) 11. Ceiling type and insulation level a) Ceiling fans a) Under attic 1la. 38.0 b) Cross ventilation No b) Single assembly 11b. c) Whole house fan No c) Knee walls/skylight walls 11c. d) Multizone cooling credit d) Radiant barrier installed 11d. No e) Multizone heating credit f) Programmable thermostat Yes *Label required by Section R303.1.3 of the Florida Building Code, Energy Conservation, if not DEFAULT. I certify that this home as complied with the Florida Building Code, Energy Conservation, through the above energy saving features whic will be installed (or exceeded) in this home before final inspection. Otherwise, a new EPL display card will be ompleted based on installed code compliant features. Builder Signatur : Date: Address of New Home: 133 Beach Ave City/FL Zip: Atlantic Beach, FL 32233 11/20/2018 4:25:46 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017)Compliant Software Page 1 of 1 Florida Building Code, Energy Conservation, 6th Edition (2017) Mandatory Requirements for Residential Performance, Prescriptive and ERI Methods FADDRESS: 133 Beach Ave Permit Number: Atlantic Beach, FL, 32233 MANDATORY REQUIREMENTS See individual code sections for full details. V SECTION R401 GENERAL ❑ R401.3 Energy Performance Level(EPL)display card(Mandatory).The building official shall require that an energy performance level (EPL) display card be completed and certified by the builder to be accurate and correct before final approval of the building for occupancy. Florida law (Section 553.9085, Florida Statutes)requires the EPL display card to be included as an addendum to each sales contract for both presold and nonpresold residential buildings.The EPL display card contains information indicating the energy performance level and efficiencies of components installed in a dwelling unit.The building official shall verify that the EPL display card completed and signed by the builder accurately reflects the plans and specifications submitted to demonstrate code compliance for the building.A copy of the EPL display card can be found in Appendix RD, R402.4 Air leakage(Mandatory). The building thermal envelope shall be constructed to limit air leakage in accordance with the requirements of Sections R402.4.1 through R402.4.5. Exception: Dwelling units of R-2 Occupancies and multiple attached single family dwellings shall be permitted to comply with Section C402.5. ❑ R402.4.1 Building thermal envelcToa building thermal envelope shall comply with Sections R402.4.1.1 and R402.4.1.2. The sealing methods between dissimilar materials shall allow for differential expansion and contraction. R402.4.1.1 Installation The components of the building thermal envelope as listed in Table R402.4.1.1 shall be installed in accordance with the manufacturer's instructions and the criteria listed in Table R402.4.1.1,as applicable to the method of construction.Where required by the code official,an approved third party shall inspect all components and verify compliance. El R402.4.1.2 Testing. The building or dwelling unit shall be tested and verified as having an air leakage rate not exceeding seven air changes per hour in Climate Zones 1 and 2,and three air changes per hour in Climate Zones 3 through 8.Testing shall be conducted in accordance with ANSI/RESNET/ICC 380 and reported at a pressure of 0.2 inch w.g.(50 pascals).Testing shall be conducted by either individuals as defined in Section 553.993(5)or(7),Florida Statutes,or individuals licensed as set forth in Section 489.105(3)(f), (g)or(i)or an approved third party.A written report of the results of the test shall be signed by the party conducting the test and provided to the code official. Testing shall be performed at any time after creation of all penetrations of the building thermal envelope. Exception: Testing is not required for additions,alterations,renovations,or repairs,of the building thermal envelope of existing buildings in which the new construction is less than 85 percent of the building thermal envelope. During testing: 1. Exterior windows and doors,fireplace and stove doors shall be closed,but not sealed,beyond the intended weatherstripping or other infiltration control measures. 2. Dampers including exhaust, intake, makeup air,backdraft and flue dampers shall be closed,but not sealed beyond intended infiltration control measures. 3. Interior doors,if installed at the time of the test,shall be open. 4.Exterior doors for continuous ventilation systems and heat recovery ventilators shall be closed and sealed. 5. Heating and cooling systems,if installed at the time of the test,shall be turned off. 6.Supply and return registers, if installed at the time of the test,shall be fully open. R402.4.2 Fireplaces. New wood-burning fireplaces shall have tight-fitting flue dampers or doors, and outdoor combustion air.Where using tight-fitting doors on factory-built fireplaces listed and labeled in accordance with UL 127,the doors shall be tested and listed for the fireplace.Where using tight-fitting doors on masonry fireplaces,the doors shall be listed and labeled in accordance with UL 907. R402.4.3 Fenestration air IeakagdNindows,skylights and sliding glass doors shall have an air infiltration rate of no more than 0.3 cfm per square foot(1.5 L/s/m2),and swinging doors no more than 0.5 cfm per square foot(2.6 Us/m2),when tested according to NFRC 400 or AAMA/WDMA/CSA 101/I.S.2/A440 by an accredited,independent laboratory and listed and labeled by the manufacturer. Exception: Site-built windows,skylights and doors. 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 1 of 5 MANDATORY REQUIREMENTS - (Continued) ❑ R402.4.4 Rooms containing fuel-burning appliances. In Climate Zones 3 through 8,where open combustion air ducts provide combustion air to open combustion fuel burning appliances,the appliances and combustion air opening shall be located outside the building thermal envelope or enclosed in a room,isolated from inside the thermal envelope.Such rooms shall be sealed and insulated in accordance with the envelope requirements of Table R402.1.2,where the walls,floors and ceilings shall meet not less than the basement wall R-value requirement.The door into the room shall be fully gasketed and any water lines and ducts in the room insulated in accordance with Section R403.The combustion air duct shall be insulated where it passes through conditioned space to a minimum of R-8. Exceptions: 1. Direct vent appliances with both intake and exhaust pipes installed continuous to the outside. 2. Fireplaces and stoves complying with Section R402.4.2 and Section R1006 of the Florida Building Code,Residential. ❑R402.4.5 Recessed lighting. Recessed luminaires installed in the building thermal envelope shall be sealed to limit air leakage between conditioned and unconditioned spaces.All recessed luminaires shall be IC-rated and labeled as having an air leakage rate not more than 2.0 cfm(0.944 L/s)when tested in accordance with ASTM E283 at a 1.57 psf(75 Pa)pressure differential.All recessed luminaires shall be sealed with a gasket or caulk between the housing and the interior wall or ceiling covering. SECTION R403 SYSTEMS R403.1 Controls. ❑ R403.1.1 Thermostat provision(Mandatory). At least one thermostat shall be provided for each separate heating and cooling system. ❑ R403.1.3 Heat pump supplementary heat(Mandatory). Heat pumps having supplementary electric-resistance heat shall have controls that,except during defrost,prevent supplemental heat operation when the heat pump compressor can meet the heating load. ❑ R403.3.2 Sealing(Mandatory) All ducts,air handlers,filter boxes and building cavities that form the primary air containment passageways for air distribution systems shall be considered ducts or plenum chambers,shall be constructed and sealed in accordance with Section C403.2.9.2 of the Commercial Provisions of this code and shall be shown to meet duct tightness criteria below. Duct tightness shall be verified by testing in accordance with ANSI/RESNET/ICC 380 by either individuals as defined in Section 553.993(5)or (7), Florida Statutes,or individuals licensed as set forth in Section 489.105(3)(0, (g)or(i), Florida Statutes,to be"substantially leak free"in accordance with Section R403.3.3. ❑ R403.3.2.1 Sealed air handler. Air handlers shall have a manufacturer's designation for an air leakage of no more than 2 percent of the design airflow rate when tested in accordance with ASHRAE 193. R403.3.3 Duct testing(Mandatory).Ducts shall be pressure tested to determine air leakage by one of the following methods: 1. Rough-in test:Total leakage shall be measured with a pressure differential of 0.1 inch w.g. (25 Pa)across the system,including the manufacturer's air handler enclosure if installed at the time of the test.All registers shall be taped or otherwise sealed during the test. 2. Postconstruction test:Total leakage shall be measured with a pressure differential of 0.1 inch w.g.(25 Pa)across the entire system,including the manufacturer's air handler enclosure.Registers shall be taped or otherwise sealed during the test. Exceptions: 1. A duct air leakage test shall not be required where the ducts and air handlers are located entirely within the building thermal envelope. 2. Duct testing is not mandatory for buildings complying by Section 405 of this code. A written report of the results of the test shall be signed by the party conducting the test and provided to the code official. ❑R403.3.5 Building cavities(Mandatory). Building framing cavities shall not be used as ducts or plenums. ❑R403.4 Mechanical system piping insulation(Mandatory). Mechanical system piping capable of carrying fluids above 105°F (41'C) or below 55°F(1 YC)shall be insulated to a minimum of R-3. ❑ R403.4.1 Protection of piping insulation. Piping insulation exposed to weather shall be protected from damage, including that caused by sunlight,moisture,equipment maintenance and wind,and shall provide shielding from solar radiation that can cause degradation of the material.Adhesive tape shall not be permitted. ❑ R403.5.1 Heated water circulation and temperature maintenance systems(Mandatory)Heated water circulation systems shall be in accordance with Section R403.5.1.1. Heat trace temperature maintenance systems shall be in accordance with Section R403.5.1.2. Automatic controls,temperature sensors and pumps shall be accessible.Manual controls shall be readily accessible. R403.5.1.1 Circulation systems. Heated water circulation systems shall be provided with a circulation pump.The system return ❑ pipe shall be a dedicated return pipe or a cold water supply pipe.Gravity and thermosiphon circulation systems shall be prohibited. Controls for circulating hot water system pumps shall start the pump based on the identification of a demand for hot water within the occupancy.The controls shall automatically turn off the pump when the water in the circulation loop is at the desired temperature and when there is no demand for hot water. ❑ R403.5.1.2 Heat trace systems.Electric heat trace systems shall comply with IEEE 515.1 or UL 515. Controls for such systems shall automatically adjust the energy input to the heat tracing to maintain the desired water temperature in the piping in accordance with the times when heated water is used in the occupancy. 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 2 of 5 F_ MANDATORY REQUIREMENTS - (Continued) R403.5.5 Heat traps(Mandatory). Storage water heaters not equipped with integral heat traps and having vertical pipe risers shall have heat traps installed on both the inlets and outlets.External heat traps shall consist of either a commercially available heat trap or a downward and upward bend of at least 3%inches(89 mm)in the hot water distribution line and cold water line located as close as possible to the storage tank. R403.5.6 Water heater efficiencies(Mandatory). 0 R403.5.6.1.1 Automatic controls. Service water-heating systems shall be equipped with automatic temperature controls capable of adjustment from the lowest to the highest acceptable temperature settings for the intended use.The minimum temperature setting range shall be from 100°F to 140°F(38°C to 60°C). 0 R403.5.6.1.2 Shut down. A separate switch or a clearly marked circuit breaker shall be provided to permit the power supplied to electric service systems to be turned off.A separate valve shall be provided to permit the energy supplied to the main burner(s)of combustion types of service water-heating systems to be turned off. ❑ R403.5.6.2 Water-heating equipment. Water-heating equipment installed in residential units shall meet the minimum efficiencies of Table C404.2 in Chapter 4 of the Florida Building Code, Energy Conservation,Commercial Provisions,for the type of equipment installed. Equipment used to provide heating functions as part of a combination system shall satisfy all stated requirements for the appropriate water-heating category.Solar water heaters shall meet the criteria of Section R403.5.6.2.1. R403.5.6.2.1 Solar water-heating systems. Solar systems for domestic hot water production are rated by the annual solar energy factor of the system.The solar energy factor of a system shall be determined from the Florida Solar Energy Center Directory of Certified Solar Systems.Solar collectors shall be tested in accordance with ISO Standard 9806,Test Methods for Solar Collectors, and SRCC Standard TM-1,Solar Domestic Hot Water System and Component Test Protocol.Collectors in installed solar water-heating systems should meet the following criteria: 1. Be installed with a tilt angle between 10 degrees and 40 degrees of the horizontal;and 2. Be installed at an orientation within 45 degrees of true south. ❑ R403.6 Mechanical ventilation(Mandatory). The building shall be provided with ventilation that meets the requirements of the Florida Building Code,Residential,or Florida Building Code, Mechanical,as applicable,or with other approved means of ventilation including: Natural, Infiltration or Mechanical means.Outdoor air intakes and exhausts shall have automatic or gravity dampers that close when the ventilation system is not operating. ❑ R403.6.1 Whole-house mechanical ventilation system fan efficacy.When installed to function as a whole-house mechanical ventilation system,fans shall meet the efficacy requirements of Table R403.6.1. Exception: Where whole-house mechanical ventilation fans are integral to tested and listed HVAC equipment,they shall be powered by an electronically commutated motor. R403.6.2 Ventilation air. Residential buildings designed to be operated at a positive indoor pressure or for mechanical ventilation shall meet the following criteria: 1. The design air change per hour minimums for residential buildings in ASHRAE 62.2,Ventilation for Acceptable Indoor Air Quality,shall be the maximum rates allowed for residential applications. 2. No ventilation or air-conditioning system make-up air shall be provided to conditioned space from attics, crawlspaces,attached enclosed garages or outdoor spaces adjacent to swimming pools or spas. 3. If ventilation air is drawn from enclosed space(s),then the walls of the space(s)from which air is drawn shall be insulated to a minimum of R-11 and the ceiling shall be insulated to a minimum of R-19,space permitting,or R-10 otherwise. R403.7 Heating and cooling equipment(Mandatory). R403.7.1 Equipment sizing. Heating and cooling equipment shall be sized in accordance with ACCA Manual S based on the equipment loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies, based on building loads for the directional orientation of the building.The manufacturer and model number of the outdoor and indoor units(if split system)shall be submitted along with the sensible and total cooling capacities at the design conditions described in Section R302.1.This Code does not allow designer safety factors,provisions for future expansion or other factors that affect equipment sizing. System sizing calculations shall not include loads created by local intermittent mechanical ventilation such as standard kitchen and bathroom exhaust systems. New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed. TABLE R403.6.1 WHOLE-HOUSE MECHANICAL VENTILATION SYSTEM FAN EFFICACY FAN LOCATION AIRFLOW RATE MINIMUM MINIMUM EFFICACY a AIRFLOW RATE MAXIMUIV (CFM) (CFMM/ATT) (CFM) Range hoods Any 2.8 cfm/watt Any In-line fan Any 2.8 cfm/watt Any Bathroom,utility room 10 1.4 cfm/watt <90 Bathroom, utility room 90 2.8 cfm/watt Any For SI: 1 cfm=28.3 L/min. a. When tested in accordance with HVI Standard 916 11/20/2018 4:25 PM EnergyGaugeO USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 3 of 5 r t MANDATORY REQUIREMENTS - (Continued) ❑ R403.7.1.1 Cooling equipment capacity. Cooling only equipment shall be selected so that its total capacity is not less than the calculated total load but not more than 1.15 times greater than the total load calculated according to the procedure selected in Section 403.7,or the closest available size provided by the manufacturer's product lines.The corresponding latent capacity of the equipment shall not be less than the calculated latent load. The published value for AHRI total capacity is a nominal,rating-test value and shall not be used for equipment sizing. Manufacturer's expanded performance data shall be used to select cooling-only equipment.This selection shall be based on the outdoor design dry-bulb temperature for the load calculation(or entering water temperature for water-source equipment),the blower CFM provided by the expanded performance data,the design value for entering wet-bulb temperature and the design value for entering dry-bulb temperature. Design values for entering wet-bulb and dry-bulb temperatures shall be for the indoor dry bulb and relative humidity used for the load calculation and shall be adjusted for return side gains if the return duct(s)is installed in an unconditioned space. Exceptions: 1. Attached single-and multiple-family residential equipment sizing may be selected so that its cooling capacity is less than the calculated total sensible load but not less than 80 percent of that load. 2. When signed and sealed by a Florida-registered engineer, in attached single-and multiple-family units,the capacity of equipment may be sized in accordance with good design practice. R403.7.1.2 Heating equipment capacity. ❑ R403.7.1.2.1 Heat pumps. Heat pump sizing shall be based on the cooling requirements as calculated according to Section R403.7.1.1,and the heat pump total cooling capacity shall not be more than 1.15 times greater than the design cooling load even if the design heating load is 1.15 times greater than the design cooling load. F-1 requirements Electric resistance furnaces. Electric resistance furnaces shall be sized within 4 kW of the design requirements calculated according to the procedure selected in Section R403.7.1. ❑ R403.7.1.2.3 Fossil fuel heating equipment. The capacity of fossil fuel heating equipment with natural draft atmospheric bumers shall not be less than the design load calculated in accordance with Section R403.7.1. F] intermittent Extra capacity required for special occasions. Residences requiring excess cooling or heating equipment capacity on an intermittent basis,such as anticipated additional loads caused by major entertainment events,shall have equipment sized or controlled to prevent continuous space cooling or heating within that space by one or more of the following options: 1. A separate cooling or heating system is utilized to provide cooling or heating to the major entertainment areas. 2. A variable capacity system sized for optimum performance during base load periods is utilized. El C403 Systems serving multiple dwelling units(Mandatory). Systems serving multiple dwelling units shall comply with Sections C403 and C404 of the IECC—Commercial Provisions in lieu of Section R403. ❑ R403.9 Snow melt and ice system controls(Mandatory) Snow-and ice-melting systems, supplied through energy service to the building, shall include automatic controls capable of shutting off the system when the pavement temperature is above 50°F(10°C),and no precipitation is falling and an automatic or manual control that will allow shutoff when the outdoor temperature is above 40°F(4.8°C). ❑ R403.10 Pools and permanent spa energy consumption(Mandatory). The energy consumption of pools and permanent spas shall be in accordance with Sections R403.10.1 through R403.10.5. ❑ R403.10.1 Heaters. The electric power to heaters shall be controlled by a readily accessible on-off switch that is an integral part of the heater mounted on the exterior of the heater,or external to and within 3 feet(914 mm)of the heater.Operation of such switch shall not change the setting of the heater thermostat.Such switches shall be in addition to a circuit breaker for the power to the heater.Gas-fired heaters shall not be equipped with continuously burning ignition pilots. ❑ R403.10.2 Time switches.Time switches or other control methods that can automatically turn off and on according to a preset schedule shall be installed for heaters and pump motors. Heaters and pump motors that have built-in time switches shall be in compliance with this section. Exceptions: 1. Where public health standards require 24-hour pump operation. 2. Pumps that operate solar-and waste-heat-recovery pool heating systems. 3. Where pumps are powered exclusively from on-site renewable generation. ❑ R403.10.3 Covers. Outdoor heated swimming pools and outdoor permanent spas shall be equipped with a vapor-retardant cover on or at the water surface or a liquid cover or other means proven to reduce heat loss. Exception: Where more than 70 percent of the energy for heating,computed over an operation season,is from site-recovered energy,such as from a heat pump or solar energy source,covers or other vapor-retardant means shall not be required. R403.10.4 Gas-and oil-fired pool and spa heaters. All gas-and oil-fired pool and spa heaters shall have a minimum thermal ❑ efficiency of 82 percent for heaters manufactured on or after April 16,2013,when tested in accordance with ANSI Z 21.56.Pool heaters fired by natural or LP gas shall not have continuously burning pilot lights. 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 4 of 5 F] R403.10.5 Heat pump pool heaters. Heat pump pool heaters shall have a minimum COP of 4.0 when tested in accordance with AHRI 1160,Table 2,Standard Rating Conditions-Low Air Temperature.A test report from an independent laboratory is required to verify procedure compliance.Geothermal swimming pool heat pumps are not required to meet this standard. R403.11 Portable spas(Mandatory)he energy consumption of electric-powered portable spas shall be controlled by the requirements of APSP-14. SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS ❑ R404.1 Lighting equipment(Mandatory). Not less than 75 percent of the lamps in permanently installed lighting fixtures shall be high-efficacy lamps or not less than 75 percent of the permanently installed lighting fixtures shall contain only high-efficacy lamps. Exception:Low-voltage lighting. R404.1.1 Lighting equipment(Mandatory)Fuel gas lighting systems shall not have continuously burning pilot lights. 11/20/2018 4:25 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017) Compliant Software Page 5 of 5 Envelope Leakage Test Report (Blower Door T st) Residential Prescriptive, Performance or ERI Method Compliance 2017 Florida Building Code, Energy Conservation, 6th Edition Jurisdiction: 261000 Permit#: Job Information Builder: Community: Lot: NA Address: 133 Beach Ave City: Atlantic Beach State: FL Zip: 32233 Air Leakage Test Results Passing results must meet either the Performance, Prescriptive, or ERI Method OPRESCRIPTIVE METHOD-The building or dwelling unit shall be tested and verified as having an air leakage rate of not exceeding 7 air changes per hour at a pressure of 0.2 inch w.g.(50 Pascals)in Climate Zones 1 and 2. OPERFORMANCE or ERI METHOD-The building or dwelling unit shall be tested and verified as having an air leakage rate of not exceeding the selected ACH(50)value,as shown on Form R405-2017(Performance)or R406-2017(ERI),section labeled as infiltration,sub-section ACH50. ACH(50)specked on Form R405-2017-Energy Calc(Performance)or R406-2017(ERI): 4.721 4,1� x 60 - 3000 = Method for calculating building volume: CFM(50) Building Volume AC. (50) O Retrieved from architectural plans ❑ PASS •Code software calculated When ACH(50) is less than 3, Mechanical Ventilation installation 0 Field measured and calculated must be verified by building departmery R402.4.1.2 Testing.Testing shall be conducted in accordance with ANSI/RESNET/ICC 380 and reported at a pressure of 0.2 inch w.g.(50 Pascals) Testing shall be conducted by either individuals asl efined in Section 553.993(5)or(7), Florida Statues.or individuals licensed as set forth in Section 489.105(3)(f),(g),or(i)or an approved third party,A written report of the results of the test shall be signed by the party conducting the test and provided to thecode official.Testing shall be performed at any time after creation of all penetrations of the building thermal envelope. During testing: 1.Exterior windows and doors,fireplace:eup stove doors shall be closed,but not sealed,beyond the intended weatherstripping or other infiltration control measures. 2.Dampers including exhaust, intake,m air,back draft and flue dampers shall be dosed,but not sealed beyond intended infiltration control measures. 3. Interior doors,if installed at the time of the test,shall be open. 4.Exterior doors for continuous ventilation systems and heat recovery ventilators shall be closed and sealed. 5. Heating and cooling systems,if installed at the time of the test,shall be turned off. 6.Supply and return registers,if installed at the time of the test,shall be fully open. Testing Company Company Name: Phone: I hereby verify that t�above Air Leakage results are in accordance with the 2017 6th Edition Florida Building Code Energy Conservatio requirements according to the compliance method selected above. Signature of Tester: Date of Test: Printed Name of Tester: License/Certification#: Issuing Authority: 11/20/2018 4:26:06 PM EnergyGauge®USA 6.0.02(Rev. 1)-FlaRes2017 FBC 6th Edition(2017)Compliant Software Page 1 of 1 OFFICE COPY PRODUCT APPROVAL INFORMATION SHEET FOR THE CITY OF ATLANTIC BEACH FLORIDA(*REQUIRED) *Project Address: > � �"��" Ave,o Permit#: et- 0 37 *Owner/Project Name: slA U4,5 As required by Florida Statute 553.842 and Florida Administrative Code Rule 9B-72,please provide the information and product approval number(s)for the building components listed below as applicable to the building construction project for the permit number listed above. You should contact your product supplier if you do not know the product approval number for any of the applicable listed products. Information regarding statewide product approval may be obtained at:w,7J,�.rloridah i!r;i:;" Category/Subcategory Manufacturer Product Description Limitation of Use State# Local# A.EXTERIOR DOORS 1.Swinging 2.Sliding 3.Sectional 4.Garage Roll-Up 5.Automatic 6.Other B.WINDOWS 1.Single hung 2.Horizontal slider 3.Casement 4.Double hung u LAW 5.Fixed 6.Awning 7.Pass-through 8.Projected 9.Mullion 10.Wind breaker 11.Dual action 12.Other Page 1 of 4 Updated 10/17/18 Category/Subcategory Manufacturer Product Description Limitation of Use State# Local# C.PANEL WALL 1.Siding 2.Soffits 3.EIFS 4.Storefronts 5.Curtain walls 6.Wall louvers 7.Glass block 8.Membrane 9.Greenhouse 10.Synthetic stucco 11.Other D.ROOFING PRODUCTS 1.Asphalt shingles 2.Underlayments 3.Roofing fasteners 4.Nonstructural metal roof 5.Built-up roofing 6.Modified bitumen 7.Single ply roofing 8.Roofing tiles 9.Roofing insulation 10.Waterproofing 11.Wood shingles/shakes 12.Roofing slate 13.Liquid applied roofing 14.Cement-adhesive coats 15.Roof tile adhesive 16.Spray applied polyurethane roof 17.Other Page 2 of 4 Updated 10/17/18 Category/Subcategory Manufacturer Product Description Limitation of UseState# Local# E.SHUTTERS 1.Accordion 2.Bahama 3.Storm panels 4.Colonial 5.Roll-up 6.Equipment 7.Other F.STRUCTURAL COMPONENTS 1.Wood connector/anchor 2.Truss plates 3.Engineered lumber 4.Railing 5.Coolers-freezers 6.Concrete admixtures 7.Material 8.Insulation forms 9.Plastics 10.Deck-roof 11.Wall 12.Sheds 13.Other G.SKYLIGHTS 1.5kylight 2.Other H.NEW EXTERIOR ENVELOPE PRODUCTS 1. 2. Page 3 of 4 Updated 10117118 In addition to completing the above list of manufacturers, product description and State approval number for the products used on this project,the Contractor shall maintain on the job site and available to the Inspector, a legible copy of each manufacturer's printed specifications and installation instructions along with this Product Approval Sheet. I certify that this product approval list is true and correct to the best of my knowledge.I further certify that use of different components other than the ones listed in this document must be approved by the Building Official. *Contractor Name(Print Name): 114 ILy V\@..n V' 0 'Contractor Signature: *Company Name: 1�� c,�f,/� ��t 1p�^)T r J � f;y' 1M *Mailing Address: � 6 � r �ey--ki L L S *City: V, *State: �� *Zip Code: *Telephone Number: —l6 S �� E-mail Address: E)Ui c c Cell Phone Number: Fax Number: Page 4 of 4 Updated 10/17/18 OFFICE COPY MIAMFDADE MIAMI-DARE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) 11805 SW 26 Street,Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami,Florida 33175-2474 T(786)315-2590 F(786)315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.Qov/economy Thorne Metal Systems,Inc. 1635 Farm Way,Suite 406 Middleburg,FL 32068 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials.The documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ). This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section (in Miami-Dade County)and/or the AHJ(in areas other than Miami-Dade County)reserve the right to have this product or material tested for quality assurance purposes.If this product or material fails to perform in the accepted manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein,and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code. DESCRIPTION: Snap Clad .032" x 16" and 18" Wide Aluminum Panel over Wood Deck LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and following statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product, for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA revises NOA#15-0428.10 and consists of pages 1 through 5. The submitted documentation was reviewed by Freddy Semino NOA No.: 17-1031.17 JAPPROVEDI htw•tFoaoe countTY Expiration Date:09/04/19 Approval Date: 11/30/17 Page 1 of 5 ROOFING SYSTEM APPROVAL: Category Roofing Sub-Category: Metal,Panels(Non-Structural) Material: Aluminum Deck Type: Wood Maximum Design Pressure: -151.75 PSF TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT: Test Product Product Dimensions Specifications Description Snap-Clad.032"x Length:various TAS 110 Corrosion resistant preformed standing seam, 18"Wide Aluminum Height: 1 %" coated,pre-finished aluminum panels. Panel Width: 16"& 18" Thickness 0.032" Min. Yield Strength: 25 KSI Individual Clip Length: 3.5" TAS 110 20GA galvanized steel clip with 2 holes,or Height: 1.875" 20GA stainless steel clip with 2 holes. Width: 1.982" Thickness:20GA Continuous Clip Length: 14.75" TAS 110 20GA galvanized steel clips with 8 holes,or Height: 1.875" 20GA stainless steel clip with 8 holes. Width: 1.982" Thickness:20GA EVIDENCE SUBMITTED: Test Agencv Test Identifier Test Name/Report Date Valspar 433X515 ASTM B 117 11/21/11 Valspar 433B173 ASTM D 4587,ASTM G 23 11/21/11 Architectural Testing 73784.01-109-18 TAS-100 08/10/07 Architectural Testing B3862.01-450-18 TAS-125 11/21/11 Architectural Testing D0841.01-450-18 TAS-125 08/14/14 NOA No.: 17-1031.17 MIAMFDADE COUNTY Expiration Date:09/04/19 APPROVED Approval Date: 11/30/17 Page 2 of 5 1 APPROVED ASSEMBLIES: System: Snap-Clad.032"x 16"or 18" Wide Aluminum Panel Deck Type: Wood,Non-insulated Deck Description: New Construction 19/32"or greater plywood or wood plank, or for re-roofing 15/32"or greater plywood. Slope Range: 2":12"or greater Maximum Uplift See Table A Below Pressure: Deck Attachment: In accordance with applicable Building Code,but in no case shall it be less than 8d x 2" ring shank nails spaced 6"OC. In reroofing,where the deck is less than 19/32"thick (Minimum 15/32")the above attachment method must be in addition to existing attachment. Underlayment: Minimum Underlayment shall be an ASTM D 226 Type 11 installed with a minimum 4" side-lap and 6"end-laps.Underlayment shall be fastened with corrosion resistant tin-caps and 12 gauge 1 '/4"annular ring-shank nails, spaced 6"OC at all laps and two staggered rows 12"OC in the field of the roll.Or any approved Underlayment having a current NOA. Fire Barrier Board: Any approved fire barrier having a current NOA. Refer to a current fire directory listing for fire ratings of this roofing system assembly as well as the location of the fire barrier within the assembly. See Limitation# 1. Valleys: Valley construction shall be in compliance with Roofing Application Standard RAS 133 and with the current published installation instructions and details in PAC Contractors Association's Roofing Installation Manual. Metal Panels and Install the" Snap-Clad.032"x 18"Wide Aluminum Panel"panels including flashing Accessories: penetrations,valleys,end laps and accessories in compliance PAC Contractors Association's current,published installation instructions and in compliance with the minimum requirements detailed in Roofing Application Standard RAS 133. Panels shall be installed along the rib with SNAP CLAD Clips secured with#10 x 1.5" pancake head screws(2 per clip for individual clip; 8 per clip for continuous clip);the screws shall be of sufficient length to penetrate through the sheathing a minimum of 3/16". The female rib of panel is snapped over the male rib of panel.Panel clips shall be spaced a maximum distance listed below in Table A. TABLE A MAximuM DESIGN PRESSURES Roof Areas Field Perimeter and Corner' Maximum Design Pressures -86 PSF -151.75 PSF Clip Type Individual Continuous Maximum Clip Spacing 24"OC Continuous 1.Extrapolation shall not be allowed NOA No.: 17-1031.17 MOMMADE COUNTY Expiration Date:09/04/19 Approval Date: 11/30/17 Page 3 of 5 LIMITATIONS 1. Fire classification is not part of this acceptance;refer to a current Approved Roofing Materials Directory for fire ratings of this product. 2. The maximum designed pressure listed herein shall be applicable to all roof pressure zones(i.e. field,perimeters, and corners).Neither rational analysis,nor extrapolation shall be permitted for enhanced fastening at enhanced pressure zones(i.e.perimeters,extended corners and corners). 3. Panels may be roll formed in continuous lengths from eave to ridge.Maximum lengths shall be as described in Roofing Application Standard RAS 133. 4. All panels shall be permanently labeled with the manufacturer's name and/or logo, city, state, and the following statement: "Miami-Dade County Product Control Approved" or with the Miami-Dade County Product Control Seal as seen below. All clips shall be permanently labeled with the manufacturer's name and/or logo, and/or model. MIAMI-DADE COUNTY , . . . • 1 5. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and Rule 61G20-3 of the Florida Administrative Code. 6. Panels may be shop or jobsite roll formed with machines model# 9191005 or 5740916 from PAC Contractors Association. NOA No.: 17-1031.17 MIAMMADE COUNTY Expiration Date:09/04/19 Approval Date: 11/30/17 Page 4 of 5 PROFILE DRAWINGS 16"or 18" 1-3/4" 1-5/8" Optional factory Stiffening ribs and or field applied striations optional. sealant bead 1.875" 1.875" 0 0 0 3.5" 1.982" 14.75" 0 / 1.982" INDIVIDUAL CLIP CONTINUOUS CLIP END OF THIS ACCEPTANCE MwhtEo4�e CONrr NOA No.: 17-1031.17 � Expiration Date:09/04/19 Approval Date: 11/30/17 Page 5 of 5