326 6TH ST REVISION Revision Request/Correction to Comments **ALL INFORMATION
=;1=L1riHIGHLIGHTED IN
City of Atlantic Beach Building Department GRAY IS REQUIRED.
u
800 Seminole Rd, Atlantic Beach, FL 32233
utsvr Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#: 9&zF1q-6x'?C)
OFFICE COPY
❑ Revision to Issued Permit OR ❑ Corrections to Comments Date: Pe-d t g-J 016
Project Address: 3d d 4 �'� S4 G f/�n f I G 12se-A t;1,
Contractor/Contact Name: Sun e if /1/ofge- s A n A 7?ovfr,,9
Contact Phone: 90 q Email:
Description of Proposed RevisionnQ/Corrections:
Sgs ALIbbeV AnJ /!G�/15� A//tn� S�� uJUc-✓ �t/�LiT Gl 75�/.� SSS �� �
DvG✓ WyD�
I affirm the revision/correction to comments is inclusive of the proposed changes.
(printed name)
• Will proposed revision/corrections add additional square footage to original submittal?
❑No ❑ Yes (additional s.f.to be added: )
• Will proposed revision/corrections add additional increase in building value to original submittal?
[]No El*Yes (additional increase in building lue:$ ) (contractor must sign if increase in valuation)
*Signature of Contractor/Agent:
(Office Use Only)
Approved ❑ Denied ❑ Not Applicable to Department Permit Fee Due$ U —
Revision/Plan Review Comments kd"roy-eo a s e y, i eo % /l ea pto S CQy) i r'1 -10 T;e r -e
Department Review Required:
Building—�
Planning Zoning Reviewed By
Tree Administrator
Public Works
Public Utilities 2 "2 6—
Public
—Public Safety Date
Fire Services Up doted 10/17/18
RONNIE FUSSELL Receipt#: 3C65793
cu;o•• ' Clerk of the Circuit Court J
501 W Adams
• • Jacksonville, FL 32202
`�`�:•:�--?•� Tel.(904)255-2000 OFFICE COPY
http://www.duvalcierk.com/
http://oncore.duvalclerk.com/
Trans#: 3681012
Cashier Date: 2/13/2019 2:58:42PM
CUSTOMER INFORMATION TRANSACTION INFORMATION PAYMENT SUMMARY
SUNBELT HOMES AND ROOFING INC Date Received: 2/13/2019 2:56:45PM Total Fees: $10.00
450-106 SR 13 N SUITE 409 Location: BEACH Total Payments: $10.00
JACKSONVILLE,FL 32259 Return Code: OVER THE COUNTER Balance Due: $0.00
Trans Type: Recording
Cash Tendered: $10.00
Cashier: TESTRADA Change: $0.00
Payment
CASH $10.00
Official Record
NOTICE COMMENCEMENT
BK/PG: 1869V704 DOC#: 2019036180 Pages: 1 Date:2/13/2019 2:58:42PM Grantor: DEITCHMAN TAMI/Grantee: SUNBELT HOMES
AND ROOFING LLC
Recording $10 1st page, $8.50 each add'I - 1 $10.00
Print Date: 2/13/2019 2:58:44PM Page 1 of 1
REVISION
OFFICE COPY Bp#
DATE 2
SIGNED
TABLE DECK APPLICATION TYPE DESCRIPTION PAGE
1A Wood New or Reroof(Tear-Off) A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 5-6
1B Wood New,Reroof(Tear-Off)or Recover B Mech.Attached Base Insulation,Bonded Top Insulation,Bonded Roof Cover 7
1C Wood New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 8-9
1D Wood New,Reroof(Tear-Off)or Recover D Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 10-12
1E-1 Wood New,Reroof(Tear-Off) E Non-Insulated,Mech,Attached Base Sheet,Bonded Roof Cover 13-15
1E-2 Wood New,Reroof(Tear-Off)or Recover E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 16-17
1F Wood New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 17
2A Steel or Structural Concrete New,Reroof(Tear-Off)or Recover B Mech.Attached Base Insulation,Bonded Top Insulation,Bonded Roof Cover 18-20
2B Steel or Structural Concrete New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 21-25
2C Steel or Structural Concrete New,Reroof(Tear-Off)or Recover D Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 26-28
3A Concrete New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 29-36
3B Concrete New or Reroof(Tear-Off) A-3 Bonded Temp Roof/Vapor Barrier,Bonded Insulation,Bonded Roof Cover 36
3C Concrete New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 37
4A LWIC New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 38-39
4B LWIC New or Reroof(Tear-Off) A-2 Mech,Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 40
4C LWIC New,Reroof(Tear-Off) E Non-Insulated,Mech,Attached Base Sheet,Bonded Roof Cover 41-44
5A CWF New or Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 45
513 CWF New or Reroof(Tear-Off) A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 46
5C CWF New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 46
5D CWF New,Reroof(Tear-Off) E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 47
6A Gypsum Reroof(Tear-Off) A-1 Bonded Insulation,Bonded Roof Cover 48-49
6B Gypsum Reroof(Tear-Off) A-2 Mech.Attached Anchor Sheet,Bonded Insulation,Bonded Roof Cover 50
6C Gypsum Reroof(Tear-Off) C Mech.Attached Insulation,Bonded Roof Cover 51
6D Gypsum Reroof(Tear-Off) E Non-Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 51
7A Various Recover A-1 Bonded Insulation,Bonded Roof Cover 52-57
7B Various Recover F Non-Insulated,Bonded Roof Cover 57
he following notes apply to the systems outlined herein:
The roof system evaluation herein pertains to above-deck roof components. Roof decks shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. Load resistance of the
roof deck shall be documented through proper codified and/or FBC Approval documentation,
Unless otherwise noted,fasteners and stress plates for insulation attachment shall be as follows. Fasteners shall be of sufficient length for the following engagements:
> Wood Deck: OMG#14 Roofgrip with Flat Bottom Plate(Accutrac),OMG HD with CMG 3 in.Galvalume Steel Plate,Dekfast#14 with Hex Plate or 3"Round Insulation Plate,Trufast HD with Trufast 3"
Metal Insulation Plates or FlintFast#14 Fastener with FlintFast 3"Insulation Plates. Minimum 0.75-inch plywood penetration or minimum 1-inch wood plank embedment.
Steel Deck: OMG#12 or#14 Roofgrip with Recessed or Flat Bottom Plate(Accutrac),CMG#12 Standard or HD with OMG 3 in.Galvalume Steel Plate,Dekfast#12 or#14 with Hex Plate or 3"Round
Insulation Plate,Trufast DP or HD with Trufast 3"Metal Insulation Plates or FlintFast#12 or#14 Fastener with FlintFast 3" Insulation Plates. Minimum 0.75-inch steel penetration and
engage the top flute of the steel deck.
➢ Structural Concrete: CMG#14 Roofgrip with Recessed or Flat Bottom Plate (Accutrac), CMG HD or CD-10 with CMG 3 in. Galvalume Steel Plate, Dekfast#14 or DekSpike with Hex Plate or 3" Round
Insulation Plate,Trufast HD or CF with Trufast 3"Metal Insulation Plates or FlintFast#14 Fastener with FlintFast 3"Insulation Plates. Minimum 1-inch embedment. Fasteners installed
with a pilot hole in accordance with the fastener manufacturer's published installation instructions.
Evaluation Report 3520.03.04-R21 for
ertificate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic®Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 1 of 57
4NEmo I Ptd:.
Unless otherwise noted,insulation may be any one layer or combination of polyisocyanurate,polystyrene,wood fiberboard,perlite,GlasRoc Roof Board or gypsum-based roof board that meets the QA requirements
of F.A.C.Rule 61620-3 and is documented as meeting FBC 1505.1 and,for foam plastic,FBC Chapter 26,when installed with the roof cover.
Minimum 200 psi,minimum 2-inch thick lightweight insulating concrete may be substituted for,or installed beneath rigid insulation board for System Type D(mechanically attached base sheet,bonded roof cover),
whereby the base sheet screws and plates are installed through the LWIC to engage the structural steel or concrete deck. The structural deck shall be of equal or greater configuration to the steel and concrete deck
listings. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. Load resistance of the roof deck shall be documented through proper
codified and/or FBC Approval documentation.
Preliminary insulation attachment for System Type D:Unless otherwise noted,refer to Section 2.2.10.1.3 of FM Loss Prevention Data Sheet 1-29(January 2016).
Unless otherwise noted,insulation adhesive application rates are as follows. Ribbon or bead width is at the time of application;the ribbons/beads shall expand as noted in the manufacturer's published instructions.
Hot asphalt(HA): Full coverage at 25-30 lbs/square
> Ashland Pliodeck(A-PD): Continuous 0.75 inch wide ribbons,12-inch o.c. Ribbons of subsequent layers shall be perpendicular to those in the layer below.
Dow INSTA-STIK Quik Set Insulation Adhesive(D-IS): Continuous 0.75 to 1 Inch wide ribbons,12-inch o.c.
Millennium One Step Foamable Adhesive(M-OSFA): Continuous 0.25 to 0.5-Inch wide ribbons,12-Inch o.c.
> Millennium PG-1 Pump Grade Adhesive(M-PG1): Continuous 0.5 to 0.75-inch wide ribbons,12-inch o.c.
OMG OlyBond 500 or OlyBond Green(08500): Continuous 0.75-inch wide ribbons,12-inch o.c.(PaceCart or SpotShot)
> ICP Adhesives CR-20: Continuous 2.5 to 3-inch wide ribbons,12-inch o.c.
> Note: When multiple loyers(s)of insulation and/or coverboard ore installed in ribbon-applied adhesive,boards shall be staggered from layer-to-layer.
> Note: The maximum edge distance from the adhesive ribbon to the edge of the insulation board shall be not less than one-half the specified ribbons spacing.
Unless otherwise noted,all insulations are flat-stock or taper board of the minimum thickness noted. Tapered polyisocyanurate at the following thickness limitations maybe substituted with the following Maximum
Design Pressure(MDP)limitations. In no case shall these values be used to'increase'the MDP listings in the tables;rather if MDP listing below meets or exceeds that listed for a particular system in the tables,then
the thinner board listed below may be used as a drop-in for the equivalent thicker material listed in the table:
Ashland Pliodeck(A-PD)@ 12-inch o.c. MDP -105.0 psf (Min.1.0-inch)
> Ashland Pliodeck(A-PD)@ 6-inch o.c. MDP -277.5 psf (Min.1.0-inch)
Dow INSTA-STIK Quik Set Insulation Adhesive(D-IS): MDP -120.0 psf (Min.1.0-inch)
i Millennium One Step Foamable Adhesive(M-OSFA): MDP -157.5 psf (Min.1.0-inch)
> Millennium PG-1 Pump Grade Adhesive(M-PG1): MDP -157.5 psf (Min.1.0-inch)
OMG OlyBond 500(OB500): MDP -45.0 psf (Min.0.5-inch Multi-Max FA3)
OMG OlyBond 500(08500): MDP -187.5 psf (Min.0.5-inch ISO 95+GL)
> OMG OlyBond 500(08500): MDP -315.0 psf (Min.0.5-inch ENRGY 3)
> OMG OlyBond 500(013500): MDP -487.5 psf (Min.0.5-inch ACFoam II)
> ICP Adhesives CR-20: MDP -117.5 psf (Min.1.0-Inch)
Bonded polyisocyanurate insulation boards shall be maximum 4 x 4 ft.
For mechanically attached components or partially bonded insulation,the maximum design pressure for the selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with FBC
Chapter 16, and Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss
Prevention Data Sheet 1-29 and Roofing Application Standard RAS 117. Assemblies marked with an asterisk*carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29(January 2016)for
Zone 2/3 enhancements.
0. For assemblies with all components fully bonded in place,the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16,and no
rational analysis is permitted.
1. For mechanically attached components over existing decks,fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the
minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing Application Standard TAS 105.
Evaluation Report 3520.03.04-R21 for
ertificate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic®Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 2 of 57
2. For existing substrates in a bonded recover or re-roof installation,the existing roof surface or existing roof deck shall be examined for compatibility and bond performance with the selected adhesive,and the existing
roof system(for recover)shall be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having Jurisdiction,as documented through field uplift testing in accordance with
ANSI/SPRI IA-1,ASTM E907,FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124.
3. For Concrete Deck or Recover Applications using System Type D,the insulation is optional.
4. lightweight Insulating Concrete(LWC)shall be cast in accordance with FBC Section 1917 to the satisfaction of the Authority Having Jurisdiction. For systems where specific LWC is referenced,refer to current LWC
Product Approval for specific deck construction and limitations. For systems where specific LWC is not referenced,the minimum design mix shall be 300 psi. In all cases,the minimum top-coat thickness is 2-inches.
For LWC over structural concrete,reference is made to FBC Section 1917.4.1,Point 1
5. Unless otherwise noted,refer to the following references for bonded base,ply or cap sheet applications.
REFERENCE LAYER MATERIAL APPLICATION
BP-AA Base Glasbase;All Weather/Empire Base;Flexiglas Base;Flintlastic Base 20 Hot asphalt at 20-40 lbs/square
(Base and Ply sheets,Asphalt-Applied) Ply One or more Flintglas Ply 4;Flintglas Premium Ply 6
BP-AA2 Base Yosemite Venting Base Hot asphalt in 24-inch diameter spots in 30-
(Base,Spot-Asphalt-Applied) inch grid pattern
BP-AA3 Base Yosemite Venting Base Hot asphalt in 9-inch diameter spots in grid
(Base,Spot-Asphalt-Applied) pattern noted herein.
BP-AA4 Base Yosemite Venting Base Hot asphalt in 9-inch wide ribbons spaced
(Base,Strip-Asphalt-Appiled) as noted herein.
BP-CA2 Base/Ply Glasbase;All Weather/Empire Base;Flexiglas Base;Flintlastic Base 20 Henry#903 Adhesive at 1.5 gal/square
BP-CA3 Base/Ply Glasbase;All Weather/Empire Base;Flexiglas Base;Flintlastic Base 20 Millennium Hurricane Force Membrane
Adhesive,beads spaced 6-inch o.c.
Base Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
SBS-AA Ply One or more Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
(SBS,Asphalt-Applied) Cap Flintlastic Cap 30;Flintlastic Cap 30 CoolStar;Flintlastic FR Cap 30;Flintlastic FR Cap 30 CoolStar,Flintlastic FR Dual Hot asphalt at 20-40 lbs/square
Cap;Flintlastic FR-P;Flintlastic FR-P CoolStar;Flintlastic Premium FR-P;Flintlastic Premium FR-P CoolStar;
Flintlastic GMS;Flintlastic GMS CoolStar
Base Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
SBS-CAl Note: Base ply cures overnight prior to application of the ply or cap ply. FlintBond Brush or Karnak No.81 Cold
(SBS,cold-Applied) Ply Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base Process Modified Bitumen Adhesive Brush
Cap Flintlastic FR Cap 30;Flintlastic FR Cap 30 CoolStar;Flintlastic FR Dual Cap;Flintlastic FR-P;Flintlastic FR-P CoolStar; Grade at 1 gal/square
Flintlastic Premium FR-P;Flintlastic Premium FR-P CoolStar;Flintlastic GMS;Flintlastic GMS CoolStar
Base Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
SBS-CA2 Ply Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
(SBS,Cold-Applied) Cap Flintlastic Cap 30;Flintlastic Cap 30 CoolStar;Flintlastic FR Cap 30;Flintlastic FR Cap 30 CoolStar,Flintlastic FR Dual Henry#903 Adhesive at 1.5 gal/square.
Cap;Flintlastic FR-P;Flintlastic FR-P CoolStar;Flintlastic Premium FR-P;Flintlastic Premium FR-P CoolStar;
Flintlastic GMS;Flintlastic GMS CoolStar
Evaluation Report 3520.03.04-R21 for
ertificate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic"Modified Bitumen Roof Systems;(610)651.5847 Appendix 1,Page 3 of 57
i
M1�
(01
EM01 etc.
REFERENCE LAYER MATERIAL APPLICATION
Base Flintlastic Base 20;Flintlastic Poly SMS Base;Flintlastic Ultra Poly SMS Base
Ply Flintlastic Base 20;Flintlastic Poly SMS Base;Fllntlastic Ultra Poly SMS Base
585-CA3 Millennium Hurricane Force Membrane
(SBS,Cold-Applied) Cap Flintlastic Cap 30;Flintlastic Cap 30 CoolStar,Flintlastic FR Cap 30;Flintlastic FR Cap 30 CoolStar;Flintlastic FR Dual Adhesive,beads spaced 6-Inch o.c.
Cap;Flintlastic FR-P;Flintlastic FR-P CoolStar;Flintlastic Premium FR-P;Flintlastic Premium FR-P CoolStar;
Flintlastic GMS;Flintlastic GMS CoolStar
Base Flintlastic Ultra Poly SMS Base;Flintlastic Base 20 T
SBS-TA Ply One or more Flintlastic Ultra Poly SMS Base;FIIntlastic Base 20 T Torch-Applied
(SBS,Torch-Applled) Cap Flintlastic FR Cap 30 T;Flintlastic FR Cap 30 T CoolStar;Flintlastic GTS;Flintlastic GTS CoolStar;Flintlastic GTS-FR;
Fllntlastic GTS-FR CoolStar;FlintClad
Base One or more Flintlastic APP Base T;Flintlastic STA;Flintlastic STA Plus
APP-TA
(AVP,Torch-Applied) Cap Flintlastic STA;Flintlastic STA Plus;Flintlastic GTA;Flintlastic GTA CoolStar;Flintlastic GTA-FR;Flintlastic GTA-FR Torch-Applied
CoolStar
SBS-SA-H Base/Ply Black Diamond Base Sheet;Flintlastic Ultra Glass SA Self-Adhering
(SBS,Self-Adhering,Hybrid Systems)
Base Flintlastic SA PlyBase;Fllntlastic SA Mid Ply
SBS-SA Ply Flintlastic SA PlyBase;Flintlastic SA Mid Ply Self-Adhering
(SBS,Self-Adhering)
Cap Flintlastic SA Cap;Flintlastic SA Cap CoolStar;Flintlastic SA Cap FR;Flintlastic SA Cap FR CoolStar
6. Vapor barrier options for use over structural concrete deck followed by adhered insulation carry the following MDP limitations. The lesser of the MDP listings below vs.those in Table 3A applies:
OPTION PRIMER TYPE VAPOR BARRIER ATTACH INSULATION ADHESIVE MDP(PSF)
V13-1. FIIntPrime Flintlastic SA Ply8ase Self-adhering OB500,12-Inch o.c. -82.5
VB-2. FIIntPrime Flintlastic GTA Torch-applled M-OSFA or M-PG1,12-Inch o.c. -420.0
VB-3. FIIntPrime Flintlastic Base 20 T,Flintlastic FR Cap 30 T or Flintlastic GTS Torch-applied M-OSFA or M-PG3,12-inch o.c. -495.0
7. "MDP"=Maximum Design Pressure is the result of testing for wind load resistance based on allowable wind loads.Refer to FBC 1609 for determination of design wind loads.
Evaluation Report 3520.03.04-1121 for
ertificate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nleminen,PE-59166 CertalnTeed Flintlastic•Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 4 of 57
Sys. Deck Anchor Sheet Base Insulation Top Insulation Roof Cover(Note 14) MDP
No. (Note 1) Type Fasteners Attach Type Attach Type Attach Base Ply Cap (Psf)
ELF-ADHERING SYSTEMS:
Min.19/32- Glasbase,All 32 ga.,1-5/8- 9-Inch o.c.in 4-Inch Min.1.5-Inch Min.0.25-Inch
Weather Empire,
Inch Inch dia.tin lap and 12-inch o.c. ACFoam II, Dens Deck (Optional)
Plexiglas Base, 0
W-1 plywood at caps with 11 ga. in two(2),equally FlintBoard ISO, HA primed with HA SB6-SA� SBS-SA -45.0
Flintlastic Base 20; SBS-SA
max.24- poly SMS;Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield FIIntPrime or
Inch spans SMS; MS;U Yosemite shank nails center rows or Multi-Max FA3 FIIntPrime SA
Min.19/32- Glasbase,All 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch Min.1.5-Inch HA full coverage or Min.0.25-Inch HA full
inch Weather Empire, Inch dia.tin lap and B-Inch o.c. ACFoam II, Dens Deck coverage or
M-M-
W-2 plywood at Plexiglas Base,Poly caps with 11 ga. in three(3),equally FlintBoard ISO, 08500, primed with OB500, SBS-SA (Optional) SBS-SA -52.5
A-PD,
max.24- SMS or Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield OSFA, FIIntPrime or OSFA,A-PD,D- SBS-SA
Inch spans SMS shank nails center rows or Multi-Max FA3 D-IS or CR-20, FIIntPrime SA IS or CR-20,6-
4-Inch o.c. Inch o.c.
Min.19/32- 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch Min.1.5-Inch Min.0.25-Inch
inch Inch dia.tin lap and 8-inch o.c. ACFoam 11, Dens Deck
W-3 plywood at Yosemite Venting caps with 11 ga. In three(3),equally FlintBoard ISO, HA primed with HA SBS-SA (Optional)
Base Sheet SBS-SA -52.5
max.24- annular ring spaced,staggered ENRGY-3,H-Shield FIIntPrime or SBS-SA
Inch spans shank nails center rows or Multl-Max FA3 FIIntPrime SA
HA full Min.0.25-inch HA full
Min.19/32- Glasbase,All 32 ga.,1-5/8- 8-Inch o.c.In 3-Inch (Optional)Min. SECUROCK
coverage or coverage or
Inch Weather Empire, Inch dia.tin lap and 8-Inch o.c. 1.5-Inch ACFoam Gypsum-Fiber
OB500,M- OB500,M- (Optional)
W-4 plywood at Flexiglas Base,Poly caps with 11 ga. in three(3),equally II,FlintBoard ISO, Roof Board SBS-SA SBS-SA -60.0
max.24- SMS or Ultra Poly annular rings aced,sta eyed ENRGY-3,H-Shield OSSA, CR-2 OSFA,R-0, - SBS-SA
P � D-IS or CR-20, Primed with IS or CR-20,6-
Inch spans SMS shank nails center rows or Multi-Max FA3 4-inch o.c. FIIntPrime or inch o.c.
FIIntPrime SA
Min.0.25-inch
Min.19/32- 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch (Optional)Min. SECUROCK
inch inch dia.tin lap and 8-Inch o.c. 1.5-Inch ACFoam Gypsum-Fiber
W-5 plywood at Yosemite Venting caps with 11 ga. in three(3),equally II,FlintBoard ISO, HA Roof Board HA SBS-SA (Optional) SBS-SA -60.0
max,24- Base Sheet annular ringspaced,staggered ENRGY-3,H-Shield S85-SA
primed with
Inch spans shank nails center rows or Multi-Max FA3 FIIntPrime or
FIIntPrime SA
IYBRID SYSTEMS:
Min.19/32- Glasbase,All 32 ga.,1-5/8- 9-Inch o.c.in 4-Inch Min.1.5-inch
inch Weather Empire, inch dia.tin lap and 12-Inch o.c. ACFoam II, (Optional) SBS-AA,,
Plexiglas Base, BP-AASBS- SBS-TA
W-6 plywood at caps with 11 ga. in two(2),equally FIintBoard ISO, HA None N/A SBS-SA-H -45.0'
Flintlastic Base 20; AA,SBS-TA or APP-
max.24- poly SMS;Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield or APP-TA 7A
Inch spans SMS;Yosemite shank nails center rows or Multi-Max FA3
Evaluation Report 3520.03.04-R21 for
ertiflcate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic*Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 5 of 57
Sys. Deck Anchor Sheat Base Insulation Top Insulation Roof Cover(Note 14) MDP
No. (Note 1) Type Fasteners Attach Type Attach Type Attach Base Ply Cap (psf)
Min.19/32- 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch Min.1.5-Inch (Optional) SBS-AA,
inch Glasbase;Flintglas Inch dia.tin lap and 8-Inch o.c. ACFoam II, BP-AA,SBS- SBS-TA
W-7 plywood at Premium Ply 6; caps with 11 ga. in three(3),equally FIIntBoard ISO, HA None N/A SBS-SA-H -60.0
max.24- Yosemite annular ring spaced,staggered ENRGY-3,H-Shield AA,SBS-7A or APP-
inch shank nails center rows or Multi-Max FA3 or APP-TA TA
ONVENTIONAL SYSTEMS:
Min.19/32- Glasbase,All 32 ga.,1-5/8- 9-Inch o.c.In 4-Inch Min.1.5-Inch Min,0.25-Inch
Inch Weather Empire, inch dia.tin lap and 12-inch o.c. ACFoam II, Dens Deck BP-AA, (Optional) SBS-AA,, BP-AA,SBS- SBS-TA
Plexiglas Base, SBS-AA
W-8 plywood at caps with 11 ga. in two(2),equally FIIntBoard I50, HA primed with HA -45.0•
Flintlastic Base 20; SBS-TA or AA,SBS-TA or APP-
max.24- Poly SMS;Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield FIIntPrime(ASTM APP-TA or APP-TA 7A
APP-
inch spans SMS;Yosemite shank nails center rows or Multi-Max FA3 D41)primer
Min.19/32- Glasbase,All 32 ga.,1-5/8- 8-Inch o,c.in 3-Inch Min.1.5-Inch HA full Min.0.25-Inch HA full
Inch Weather Empire, inch dia.tin lap and 8-Inch o.c. ACFoam coverage or II, Dens Deck coverage or BP-AA, (Optional) SBS-AA,
SBS- SBS-TA BP-AA
M- SBS-AA,, ,
W-9 plywood at Plexiglas Base,Poly caps with 11 ga. In three(3),equally FIIntBoard I50, OB500, primed with 08500, -52.5
max.24- SMS or Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield OSFA,A-PD, FIIntPrime(ASTM OSFA,A-PD,D- SBS-TA or AA,S8S-TA or APP-
inch spans SMS shank nails center rows or Multi-Max FA3 D-IS or CR-20, D41)primer IS or CR-20,6- APP-TA or APP-TA TA
4-inch o.c. inch o.c.
Min.19/32- 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch Min.1.5-Inch Min.0.25-inch BP-AA (Optional) SBS-AA,
Inch Inch dia.tin lap and 8-Inch o.c. ACFoam II, Dens Deck
Yosemite Venting SBS-AA, BP-AA,585- SBS-TA
Base Sheet
V-10 plywood at caps with 11 ga. In three(3),equally FIIntBoard ISO, HA primed with HA -52.5
max.24- annular ring spaced,staggered ENRGY-3,H-Shield FIIntPrime(ASTM SBS-7A or AA, A or APP-
inch spans shank nails center rows or Multi-Max FA3 D41)primer APP-TA or APP-TA TA
Min.19/32- Glasbase,All 32 ga.,1-5/8- 8-Inch o.c.in 3-Inch (Optional)Min. HA full HA full
Inch Weather Empire, Inch dla.tin lap and 8-Inch o.c. 1.5-Inch ACFoam coverage or Min.0.25-Inch coverage or SP-AA, (Optional) SBS-AA,
SBS- SBS-TA BP-AA
M- SBS-AA
M- SECUROCK OB500, , ,
V-11 plywood at Plexiglas Base,Poly caps with 11 ga. in three(3),equally II,FIIntBoard I50, OB500, -60.0
max.24- SMS or Ultra Poly annular ring spaced,staggered ENRGY-3,H-Shield OSFA,A-PD, Gypsum-Fiber OSFA,A-PD,D- SBS-TA or AA,SBS-TA or APP-
inch spans SMS shank nails center rows or Multi-Max FA3 D-IS or CR-20, Roof Board IS or CR-20,6- APP-TA or APP-TA TA
4-inch o.c. Inch o.c.
Min.19/32- 32 ga.,1-5/8- 8-Inch o.c.in 3-inch (Optional)Min. Min.0.25-Inch BP-AA, (Optional) SBS-AA,
Inch Inch dia.tin lap and 8-Inch o.c, 1.5-Inch ACFoam
Yosemite Venting SECUROCK SBS-AA, BP-AA,SBS- 585-TA
V-12 plywood at Base Sheet caps with 11 ga. In three(3),equally ll,FIIntBoard ISO, HA Gypsum-Fiber HA SBS-TA or AA,SBS-TA or APP- -60'0
max.24- annular ring spaced,staggered ENRGY-3,H-Shield Roof Board APP-TA or APP-TA TA
Inch spans shank nails center rows or Multi-Max FA3
Z5�3 2�
Evaluation Report 3520.03.04-1121 for
ertificate of Authorization#32455 Revision 21:06/20/2018
repared by: Robert Nleminen,PE-59166 CertalnTeed Flintlastic•Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 6 of 57
4"
lk7
NEMO I etc.
TABLE 1E-1: .. REROOF(TEAR-OFF)
SYSTEM TYPE E: NON-INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER
System Deck Base Sheet Root Cover(Note 14) MDP
No. (Note 1) Base Fasteners Attach Ply Cap (PSO
SELF-ADHERING SYSTEMS:
9-inch o.c.at min.3-inch lap and 12-inch o.c.in
Min.15/32-Inch plywood at two(2),equally spaced,staggered center rows; (Optional)SBS
W-51 max 24-inch spans Flintlastic SA NailBase Simplex MAXX Cap Stress plates shall be primed with FlintPrime SA SBS-SA 45.0'
(ASTM D41)primer.
W-52 Min.15/32-inch plywood at Flintlastic SA NailBase Min.1-inch long,12 ga.Simplex 6-inch o.c.at min.2-inch lap and 6-inch o.c.in (Optional)SBS- SBS-SA -52.5
max 24-Inch spans Metal Cap Nails four(4),equally spaced,staggered center rows SA
Min.19/32-Inch plywood at 32 ga.,1-5/8-inch dia.tin caps 8-Inch o.c.at min.2-Inch lap and 8-inch o.c.in
W-53 Flintlastic SA NailBase with 11 ga.annular ring shank three(3),equally spaced,staggered center (Optional)585- SBS-SA -52.5
max.24-Inch spans nails rows SA
Min.19/32-inch plywood at 32 ga.,1-5/8-inch dia.tin caps 8-Inch o.c.at min.2-Inch lap and 8-inch o.c.in
W-54 Flintlastic SA NailBase with 11 ga.annular ring shank three(3),equally spaced,staggered center (Optional)SBS SBS-SA -60.0
max.24-Inch spans nails rows SA
8-Inch o.c.at min.3-Inch lap and 8-Inch o.c.In
Min.15/32-inch plywood at three(3),equally spaced,staggered center (Optional)SBS-
W-55 max 24-inch spans Flintlastic SA NailBase Simplex MAXX Cap rows;Stress plates shall be primed with SA SBS-SA 67.5
FlintPrime(ASTM D41)primer.
Min.19/32-inch plywood at 32 ga.,1-5/8-inch dia.tin caps 6-Inch o.c.at min.2-Inch lap and 6-Inch o.c.in (Optional)SBS-
W-56 max 24-Inch spans Flintlastic SA NailBase with 11 ga.annular ring shank four(4),equally spaced,staggered center rows SA SBS-SA -75.0
nails
Cap nails:1-Inch diameter,
W-57 Min,15/32-inch plywood at Flintlastic SA NailBase 0.032-inch thick metal cap with 7-inch o.c.at min.4-inch laps and 7-inch o.c.In (Optional)SBS- SBS-SA -75.0
max 24-inch spans 0.120"shank diameter,annular five(5),equally spaced,staggered center rows SA
ring shank nails
32 ga.,1-5/8-inch dia.tin caps
W-58 Min.19/32-inch plywood at Flintlastic SA NailBase with 11 ga.annular ring shank four( ),e u min. a Inch lap and 4-Inch o.c.in (Optional)SBS- SBS-SA -105.0
max 24-inch spans nails four(4),equally spaced,staggered center rows SA
HYBRID SYSTEMS:
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps
W-59 Min.19/32-inch exterior grade Base 20;All Weather/Empire with 11 ga.annular ring shank 9-Inch o.c.at 4-Inch lap and 12-Inch o.c.in two SBS-SA-H SBS-AA,SBS-TA -45.0'
plywood at max.24-inch spans Base;Poly SMS Base;Ultra Poly nails (2),equally spaced,staggered center rows or APP-TA
SMS Base
Glasbase;Flexiglas;Flintlastic
Min.15/32-inch plywood at Base 20;All Weather/Empire Min.1-Inch long,12 ga.Simplex 6-Inch o.c.at 3-inch lap and 6-inch o.c.in four SBS-SA-H SBS-AA,SBS-TA 52.5
W-60 max 24-inch spans Base;Poly SMS Base;Ultra Poly Metal Cap Nails (4),equally spaced,staggered center rows or APP-TA
SMS Base
MEMO ETC,LLC Evaluation Report 3520.03.04-1121 for FL2533-R20
Certificate of Authorization#32455 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 21:06/20/2018
Prepared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic•Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 13 of 57
ON EMO I etc.
TABLE 1E-1: DECKS—NEW CONSTRUCTION OR REROOF(TEAR-OFF)
SYSTEM TYPE E: . MECHANICALLY ATTACHED BASE SHEET,BONDED ..
System Deck Base Sheet Roof Cover(Note 14) MDP
No. (Note 1) Base Fasteners Attach Ply Cap (psf)
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps
Min.19/32-inch plywood at 8-inch o.c.at 4-inch lap and 8-inch o.c.in three SBS-AA,SBS-TA
W-61 max 24-inch spans Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (3),equally spaced,staggered center rows SBS-SA-H or APP-TA -52.5
Poly SMS Base nails
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps
Min,19/32-inch plywood at 8-inch o.c.at 4-inch lap and 8-inch o.c.in three SBS-AA,SBS-TA
W-62 Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank SBS-SA-H -60.0
max 24-inch spans Poly SMS Base nails (3),equally spaced,staggered center rows or APP-TA
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps
Min.19/32-inch plywood at 6-inch o.c.at 4-inch lap and 6-inch o,c.in four SBS-AA,S85-TA
W-63 max 24-inch spans Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (4),equally spaced,staggered center rows SBS-SA-H or APP-TA 82.5
Poly SMS Base nails
Glasbase;Flexiglas;Flintlastic 32 ga.,1.5/8-inch dia.tin caps
W-64 Min.19/32-inch plywood at Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (4),eq o.c.at 3-inch lap and d center
r r in four SBS-SA-H or APP
SBS-A ,SBS-TA -105.0
max 24-inch spans Poly SMS Base nails (4),equally spaced,staggered center rows or APP-TA
CONVENTIONAL SYSTEMS:
Glasbase;Flexiglas;Flintlastic
32 ga.,1-5/8-inch dia.tin caps BP-AA,SBS-AA,
Min.19/32-inch exterior grade Base 20;All Weather/Empire 9-inch o.c.at 4-inch lap and 12-inch o.c.in two SBS-AA,SBS-TA
W-65 at max.24-inch spans Base;Poly SMS Base;Ultra Polywith 11 ga.annular ring shank (2),equally spaced,staggered center rows SBS TA or APP- or APP TA 45.0'
plywood p y nails ( ) q y p gB TA
SMS Base;Yosemite
Glasbase;Flexiglas;Flintlastic (Optional)BP-
Min.15/32-inch exterior grade 9-inch o.c.at 2-inch lap and 18-inch o.c.in two SBS-AA,SBS-7A
W-66 Base 20;All Weather/Empire Simplex MAXX Cap AA,SBS-AA,SBS- -45.0w
plywood at max.24-inch spans Base;Poly SMS Base;Yosemite (2),equally spaced,staggered center rows TA or APP-TA or APP-TA
W-67 Min.15/32-inch exterior grade Flintlastic APP Base T Simplex MAXX Cap 9-inch o.c.at 2-inch lap and 18-inch o.c.in two (Optional)APP- APP-TA -45.0`
plywood at max.24-inch spans (2),equally spaced,staggered center rows TA
Glasbase;Flexiglas;Flintlastic
(Optional)BP-
Min.15/32-inch plywood at Base 20;All Weather/Empire Min.1-inch long,12 ga.Slmplex 6-inch o.c.at 3-inch lap and 6-inch o.c.in four SBS-AA,SBS-TA
W 68 max 24-inch spans Base;Poly SMS Base;Ultra Poly Metal Ca Nails AA,SBS-AA,SBS- 52.5
p y y p (4),equally spaced,staggered center rows TA or APP-TA or APP-TA
SMS Base;Yosemite
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia,tin caps BP-AA,SBS-AA,
W-69 Min.19/32-i spanch plywood at Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (3),a all s a inch lap and d center
r r in three SBS-TA or APP- or APP,SBS-TA -52.5
max 24-inch spans Poly SMS Base;Yosemite nails 13),equally spaced,staggered center rows TA or APP-TA
Glasbase;Flexiglas;Flintlastic (Optional)BP-
Min.15/32-inch exterior grade 9-inch o.c.at 2-inch lap and 12-inch o.c.in two SBS-AA,SBS-TA
W-70 plywood at max.24-inch spans Base 20;All Weather/Empire Simplex MAXX Cap (2),equally spaced,staggered center rows AA,SBS-AA,SBS- or APP TA -52.5
Base;Poly SMS Base;Yosemite TA or APP-TA
W-71 Min.15/32-inch exterior grade Flintlastic APP Base T Simplex MAXX Cap 9-inch o.c.at 2-inch lap and 12-inch o.c.in two (Optional)APP- APP-TA -52.5
plywood at max.24-inch spans (2),equally spaced,staggered center rows TA
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps BP-AA,SBS-AA,
Min.19/32-inch plywood at 8-inch o.c.at 4-inch lap and 8-inch o.c.in three 585-AA,SBS-TA
W-72 max 24-inch spans Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (3),equally spaced,staggered center rows SBS-TA or APP- or APP-TA -60.0
Poly SMS Base;Yosemite nails TA
NEMO ETC,LLC Evaluation Report 3520.03.04-R21 for FL2533-R20
Certificate of Authorization#32455 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 21:06/20/2018
Prepared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic®Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 14 of 57
ONEMOjetc.
TABLE 1E-1: .. REROOF(TEAR-OFF)
..
SYSTEM TYPE E: NON-INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER
System Deck Base Sheet Roof Cover(Note 14) MDP
No. (Note 1) Base Fasteners Attach Ply Cap (psf)
Glasbase;Flexiglas;Flintlastic Cap nails:1-inch diameter,
(Optional)BP-
Min.15/32-inch plywood at Base 20;All Weather/Empire 0.032-inch thick metal cap with 6-inch o.c.at 4-inch lap and 6-inch o.c.at five SBS-AA or SBS-
W 73 max 24-inch spans Base;Poly SMS Base;Ultra Poly 0.120-inch shank diameter, AA,SBS-AA or 67.5
p y y (5)equally spaced,staggered center rows SBS-TA TA
SMS Base;Yosemite annular ring shank nails.
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia.tin caps BP-AA,SBS-AA,
Min.19/32-inch plywood at 6-inch o.c.at 4-inch lap and 6-inch o.c.in four SBS-AA,SBS-TA
W-74 max 24-inch spans Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (4) equally spaced,staggered center rows SBS-TA or APP- or APP-TA 82.5
/ Poly SMS Base;Yosemite nails TA
Glasbase;Flexiglas;Flintlastic (Optional)BP-
Min.15/32-inch exterior grade 6-inch o.c.at 2-inch lap and 6-inch o.c.in two SBS-AA,SBS-TA
W-75 plywood at max.24-inch spans Base 20;All Weather/Empire Simplex MAXX Cap (2),equally spaced,staggered center rows AA,SBS-AA,SBS- or APP-TA -90.0
Base;Poly SMS Base;Yosemite TA or APP-TA
W-76 Min.15/32-inch exterior grade Flintlastic APP Base T Simplex MAXX Cap 6-inch o.c.at 2-inch lap and 6-inch o.c.in two (Optional)APP- APP-TA -90.0
plywood at max.24-inch spans (2),equally spaced,staggered center rows TA
Glasbase;Flexiglas;Flintlastic 32 ga.,1-5/8-inch dia,tin caps BP-AA,SBS-AA,
W-77 Min.19/32-i spanch plywood at Base 20;Poly SMS Base;Ultra with 11 ga.annular ring shank (4)nch o.c.at 3-inch lap and d center
r r in four SBS-TA or APP- or APP,SBS-TA -105.0
max 24-inch spans Poly SMS Base;Yosemite nails (4),equally spaced,staggered center rows TA or APP-TA
Glasbase;Flexiglas;Flintlastic (Optional)BP-
Min.15/32-inch exterior grade 6-inch o.c.at 2-inch lap and 6-inch o.c.in three SBS-AA,585-TA
W-78 Base 20;All Weather/Empire Simplex MAXX Cap AA,SBS-AA,SBS- -105.0
plywood at max.24-inch spans (3),equally spaced,staggered center rows or APP-TA
Base;Poly SMS Base;Yosemite TA or APP-TA
W-79 Min.15/32-inch exterior grade Flintlastic APP Base T Simplex MAXX Cap 6-inch o.c.at 2-inch lap and 6-inch o.c.in three (Optional)APP- APP-TA 105.0
plywood at max.24-inch spans (3),equally spaced,staggered center rows TA
NEMO ETC,LLC Evaluation Report 3520.03.04-R21 for FL2533-R20
Certificate of Authorization#32455 6"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 21:06/20/2018
Prepared by: Robert Nieminen,PE-59166 CertainTeed Flintlastic®Modified Bitumen Roof Systems;(610)651-5847 Appendix 1,Page 15 of 57