2216 Alicia Ln. ROOF19-0029 TPO Roof System ROOF NON SHINGLE PERMIT PERMIT NUMBER
;s li
CITY OF ATLANTIC BEACH ROOF19-0029
ISSUED: 4/9/2019
800 SEMINOLE ROAD
on 3 ATLANTIC BEACH. FL 32233 EXPIRES: 10/6/2019
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
NOTICE: In addition to the requirements of this permit,there may be additional restrictions applicable to this property
that may be found in the public records of this county,and there may be additional permits required from other
governmental entities such as water management districts,state agencies,or federal agencies.
JOB ADDRESS: PERMIT TYPE: DESCRIPTION: VALUE OF WORK: •
2216 ALICIA LN ROOF NON SHINGLE TPO ROOF SYSTEM $2000.00
TYPE OF REAL ESTATE ZONING: BUILDING USE SUBDIVISION:
CONSTRUCTION: NUMBER: GROUP:
169519 0820 TIFFANY BY THE SEA
COMPANY: ADDRESS: CITY: STATE: ZIP:
AMERICAN ROOFING OF
JACKSONVILLE 2117 University Blvd. S JACKSONVILLE FL 32216
OWNER: ADDRESS: CITY: STATE: ZIP:
DEPADUA VIRGILLO G 2216 ALICIA LN ATLANTIC BEACH FL 32233-5974
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT
IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF
COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST
INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN
ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT.
LIST OF CONDITIONS
Roll off container company must be on City approved list. Container cannot be placed on City right-of-way.
FEES
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
BUILDING PERMIT 455-0000-322-1000 0 $65.00
BUILDING PLAN CHECK 455-0000-322-1001 0 $32.50
STATE DBPR SURCHARGE 455-0000-208-0700 0 $2.00
STATE DCA SURCHARGE 455-0000-208-0600 0 $2.00
TOTAL:$101.50
Issued Date:4/9/2019 1 of 2
AROOF NON SHINGLE PERMIT PERMIT NUMBER
A " CITY OF ATLANTIC BEACH ROOF19-0029 f
800 SEMINOLE ROAD ISSUED: 4/9/2019
j;o' ATLANTIC BEACH. FL 32233 EXPIRES: 10/6/2019
•
Issued Date:4/9/2019 2 of 2
v,i- i� City of Atlantic Beach APPLICATION NUMBER
I�t lA Building Department (To be assigned by the Building Department.)
800 Seminole Road RF l • -
Atlantic Beach, Florida 32233-5445 ��
1 1
Phone(904)247-5826 • Fax(904)247-5845
^"i 0;;1�% Email: building-dept@coab.us Date routed:
City web-site: http://www.coab.us
APPLICATION REVIEW AND TRACKING FORM
Property Address: -Z t ( , (� L-te t Pc L.( _) Depart!nt review required Yeses No
wilding I/
Applicant: eI�C A_- R (/o(-' P ag &Zoning
Tree Administrator
Project: ( f� Roor (ADG Public Works
Public Utilities
Public Safety
Fire Services
Review fee $ Dept Signature
Other Agency Review or Permit Required Review or Receipt Date
\L'.
of of Permit Verified By
Florida Dept. of Environmental Protection
/J
Florida Dept. of Transportation
St.Johns River Water Management District
Army Corps of Engineers
Division of Hotels and Restaurants
Division of Alcoholic Beverages and Tobacco
Other:
APPLICATION STATUS
Reviewing Department First Review: FKDproved. ❑Denied. ❑Not applicable
(Circle one.) Comments:
BUILDING
PLANNING &ZONING
g C�,
Reviewed by: Date:
TREE ADMIN.
Second Review: Approved as revised. ❑Denied.i ❑Not applicable
PUBLIC WORKS Comments:
PUBLIC UTILITIES
PUBLIC SAFETY Reviewed by: Date:
FIRE SERVICES Third Review: ❑Approved as revised. ❑Denied. I INot applicable
Comments:
Reviewed by: Date:
Revised 05/19/2017
(-4--„,,,,,,,„,,, Building Permit Application OFFICE P28/17
City of Atlantic Beach
'-?r, ,,I800 Seminole Road,Atlantic Beach,FL 32233
Phone:(904)247-5826 Fax:(904)247-5845
Job Address: 2216 Alicia Lane,Atlantic Beach,FL 32233 Permit Number: RROOF [9 r C) 0)Z I!�
Legal Description 46-94 37-2S-29E TIFFANY BY THE SEA LOT 22 RE# 169519-0820
Valuation of Work(Replacement Cost)$2,000.00 Heated/Cooled SF NA Non-Heated/Cooled NA
• Class of Work(Circle one): New Addition Alteration Repair Move Demo Pool Window/Door
• Use of existing/proposed structure(s)(Circle one): Commercial Residential
• If an existing structure,is a fire sprinkler system installed?(Circle one): Yes No N/A ,_,IC
• Submit a Tree Removal Permit Application if any trees are to be removed or Affidavit of No Tree Removal U
Describe in detail the type of work to be performed: Z y Z•.
Install TPO Roof system over two exterior porches. Approximately 300 square feet. I a o N .
E Zr-- r
Florida Product Approval#FL 14083-R19 for multiple products use product a it aRc n Q
Property Owner Information VV0 U p U p
Name: Virgillo&Pamela Depadua Address: 2216 Alicia Lane W Z < Z
City Atlantic Beach State FL Zip 32233 Phone O Z LL Q
E-Mail 0 J V)
Owner or Agent(If Agent, Power of Attorney or Agency Letter Required) Owner (C Z i•-•esZ
LI
Contractor Information O� U. Er n
Name of Company: American Roofing of Jacksonville,LLC. QualifyingAgent: Dan Kinkel 0O u) w
a � m '
Address 2117 University Blvd S City Jacksonville State FL Zip 32 I— W w
Office Phone 904-385-4375 Job Site/Contact Number 904-385-4374 w0 co W
State Certification/Registration# RC29027546 E-Mail admin@americanroofingjax.com j OC
Architect Name& Phone# NA w
Engineer's Name&Phone# NA
Workers Compensation Builder's Mutal Insurance#WCP1052393,expiration 5/3/2019
Exempt/Insurer/Lease Employees/Expiration Date
Application is hereby made to obtain a permit to do the work and installations as indicated.I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulationg
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING,SIGNS,
WELLS, POOLS, FURNACES,BOILERS, HEATERS,TANKS,and AIR CONDITIONERS, etc. NOTICE:In addition to the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and
there may be additional permits required from other governmental entities such as water management districts,state agencies,or
federal agencies.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCI ' G, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORD! YOUR TICEaOF COMMENCEMENT. V�
jlit.
b, � ..
_�.. "
(Si ature of Owner or Agent) _____— (Signature of .ntractor)
(including contractor) '�77
Signed and sworn to(or aff ed be''.re me this ?Tday of Signed and sworn to(or affirmed)before me this day of
M/f tic if a'-t' b H k.. , L o 06- f}i3"t A , ,by
i _ ', P_ fr�tcTP'_!o,2F��d
zi3n ture of No0.r1)17 r,"0 GENU (Signature of Notary)
.?•;`) .1,0,,f Notary Pu 'ic State of Florida
[ ]Personally Known 0• c•w R •g Ccmmission 1= FF Su29i [ ]Personally Known OR
-,A=k'`'�-0 Gom;n.F:.oires n 0,,'.01 J Produced Identification
Produced Identification 9r��cz,,� My [ )
Type of Identification: ttlr14-1Wnnst-0ededthrcu ,' '«.Type of Identification:
REVIEWED
4 ATLON IC BEACH OFFICE COPY
SEE PERMITS FOR ADDITIONAL
REQUIREMENTS AND CONDITIONS
IMAM! REVIEWED BY: DATE: MIAMI-DADE COUNTY
�COLNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) 11805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami,Florida 33175-2474
T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.eov/economy
Carlisle SynTec,a division of Carlisle Construction Materials Inc.
1285 Ritner Highway
Carlisle,PA 17013
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this product
or material tested for quality assurance purposes.If this product or material fails to perform in the accepted manner,the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Carlisle Sure-Weld Single Ply TPO Roof Systems over Wood Decks
LABELING:Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,for
sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall.be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA# 14-0626.03 and consists of pages 1 through 8.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 17-0207.02
MFAPPROVED ADE COUNTY Expiration Date: 08/31/23
Approval Date:08/16/18
Page 1 of 8
ROOFING SYSTEM APPROVAL
Category: Roofing
Sub-Category: Single Ply
Material: TPO
Deck Type: Wood
Maximum Design Pressure -67.5 psf
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
TABLE 1
Test
Product Name Dimensions Specifications Product Description
Sure-Weld various TAS 131 Reinforced white or colored TPO
membrane. ,
Sure-Weld EXTRA various TAS 131 Reinforced white or colored TPO
membrane.
Sure-Weld FleeceBACK Various TAS 131 Reinforced white or colored TPO
membrane with Fleece backing.
Sure-Weld AFX Various TAS 131 Reinforced white or colored TPO
membrane with Fleece backing
Sure-Weld HS various TAS 131 Reinforced white or colored FR
TPO membrane.
Carlisle FAST 100 Adhesive various TAS 110 Polyurethane Adhesive
Carlisle Olybond 500 BA Various TAS 110 Polyurethane Adhesive
Carlisle One-Step Adhesive Various TAS 110 Polyurethane Adhesive
Sure-Weld Bonding Adhesive various TAS 110 Solvent-based bonding adhesive.
Aqua Base 120 Bonding Adhesive Various TAS 110 Water-Based Bonding Adhesive
Cold Applied Adhesive Various TAS 110 Asphalt Modified Polyether
Adhesive
NOA No.: 17-0207.02
MIAMFDADE COUNTY
E% it
APPROVED p' ation Date: 08/31/23
Approval Date:08/16/18
Page 2 of 8
APPROVED INSULATIONS:
TABLE 2
Product Name Product Description Manufacturer
(With Current NOA)
Polyisocyanurate HP-NB,HP-H Polyisocyanurate roof insulation. Carlisle Syntec,Inc.
Dens Deck,Dens Deck Prime Silicon treated gypsum Georgia Pacific Gypsum
Corp.
Structodeck High Density Fiberboard High Density Wood Fiber insulation board. Blue Ridge Fiberboard,Inc.
Insulation
APPROVED FASTENERS:
TABLE 3
Fastener Product Product Manufacturer
Number Name Description Dimensions (With Current NOA)
(IT Sure-Seal HP,HP , - sulation and membrane fastener Various Carlisle Syntec,Inc.
XTRA Fasteners
2. Piranha,Piranha Xtra Barbed Metal plates used for 2-3/8" dia Carlisle Syntec,Inc.
Plates membrane securement with Sure-
Seal fasteners.
3. #12 Standard Roofgrip,#14 Insulation and membrane fastener Various OMG,Inc.
Roofgrip
4. #12 Standard Stainless Stainless steel insulation and Various OMG,Inc.
Steel membrane fastener
5. Trufast#14 HD Fasteners Insulation and membrane fastener Various Altenloh,Brinck&Co.
U.S.,Inc.
6. Trufast#12 DP Fastener Insulation and membrane fastener Various Altenloh,Brinck&Co.
U.S.,Inc.
7. Trufast 3"Metal Insulation Insulation and membrane fastener Various Altenloh,Brinck&Co.
Plate U.S.,Inc.
8. Trufast 2.4"Barbed Metal Insulation and membrane fastener Various Altenloh,Brinck&Co.
Seam Plate(14 Barb) U.S.,Inc.
NOA No.: 17-0207.02
MIAMI•DADE COUNTY Expiration Date: 08/31/23
APPROVED Approval Date:08/16/18
Page 3 of 8
EVIDENCE SUBMITTED:
Test Agency Test Identifier Description Date
Architectural Testing Inc. ATI-37490.01 ASTM D 2137 7/7/00
Factory Mutual Research Corp. 3Z9A1.AM FMRC Standard 4470 10/15/97
Approval Guide Excerpt Wind Uplift Classification 5/00
Listings
Letter Wind Uplift Classification 5/2/00
3006110 Class 4470 6/13/01
3011220 ASTM E 108 8/16/01
Celotex Corporation Testing Services 520257 PA 131-95 4/19/00
SGS U.S. Testing Company 131248-R2 ASTM D 1149 1/6/00
Incorporated
Atlantic&Caribbean Roof ACRC 07-059 TAS 114-J 10/23/07
Consulting,LLC ACRC 07-051 TAS 114-J 09/05/07
Trinity ERD C46470.07.14-1A TAS 131 07/16/14
C46470.07.14-1B TAS 131 07/16/14
C46470.07.14-2A TAS 131 07/30/14
C46470.07.14-4-R1 TAS 131 07/21/14
NOA No.: 17-0207.02
MFA PROVED u IMNTY
Expiration Date: 08/31/23
Approval Date:08/16/18
Page 4 of 8
APPROVED ASSEMBLIES
Membrane Type: Single Ply, Thermoplastic,TPO, Reinforced,FleeceBACK
Deck Type II: Wood, Insulated
Deck Description: 19/32" or greater plywood or wood plank
System Type C(1): All layers of insulation simultaneously attached; membrane fully adhered.
All General and System Limitations apply. Roof accessories not listed in Table 1 of this NOA are not approved
and shall not be installed unless said accessories demonstrate compliance with prescriptive Florida Building
Code requirements and are field fabricated utilizing the approved membranes listed in Table 1.
Base Insulation Layer Insulation Fasteners Fastener
(Table 3) Density/ft2
Polyisocyanurate HP-H,HP-NB
Minimum 1.5"thick 1,3,4 1:2 ft2
Minimum 2"thick 1,5,6 1:4 ft2
Structodeck High Density Wood Fiber Board
Minimum V2"thick 3,4 1:2 ft2
Note: Insulation panels listed are minimum sizes and dimensions; if larger panels are used,the number of
fasteners shall be increased maintaining the same fastener density. Please refer to Roofing Application Standard
RAS 117 for insulation attachment.
Vapor Retarder: (Optional)Any UL or FMRC approved vapor retarder applied to the roof deck or over a base
layer of insulation.
Barrier: 'A", 3/8", %s", or 5/s" gypsum.
Membrane#1: Sure-Weld, Sure-Weld HS,Reinforced, 45 or 60 mil membrane or Sure-Weld EXTRA, 72 or 80
mil membrane fully adhered to the insulation using Sure-Weld Bonding Adhesive applied to the
substrate at a rate of 1 gal/60 ft.2(finished surface)or Aqua Base 120 Bonding Adhesive applied
to the substrate at a rate of 1 gal/120 ft.2
Maximum Design Pressure—45 psf(See General Limitation #9)
Membrane#2: Sure-Weld FleeceBACK 100 or 115 mil membrane fully adhered to the insulation using Aqua
Base 120 Bonding Adhesive applied to the substrate at a rate of 1 gal/120 ft.2
Maximum Design Pressure—45 psf. (See General Limitation #9)
Sure-Weld FleeceBACK 100 or 115 mil membrane fully adhered to the insulation using FAST
Adhesive applied to the substrate at a rate of 1 gal/sq.
Maximum Design Pressure—45 psf. (See General Limitation #9)
NOA No.: 17-0207.02
MIAMIOADE
ROVED COUNTY Expiration Date: 08/31/23
Approval Date: 08/16/18
Page 5 of 8
Membrane#3: Sure-Weld AFX membrane adhered to the insulation in a full mopping of approved asphalt
applied within the EVT range and at a rate of 20-25 lbs./sq.or Cold Applied Adhesive applied
to the substrate at a rate of 1 gal/67 ft.2
Maximum Design Pressure—45 psf. (See General Limitation#9)
Maximum Design See Membrane Options Above
Pressure:
NOA No.: 17-0207.02
MIAMFpp pEVU
Ep Expiration Date: 08/31/23
Approval Date:08/16/18
Page 6 of 8
Membrane Type: Single Ply,Thermoplastic,TPO,Reinforced, Fleecebacked
Deck Type 1I: Wood, Insulated
Deck Description: 19/32" or greater plywood or wood plank
System Type D(1): Membrane mechanically attached over preliminarily fastened insulation.
All General and System Limitations apply.Roof accessories not listed in Table 1 of this NOA are not approved
and shall not be installed unless said accessories demonstrate compliance with prescriptive Florida Building
Code requirements and are field fabricated utilizing the approved membranes listed in Table 1.
Insulation Layer Insulation Fasteners Fastener
(Table 3) Density/ft2
Polyisocyanurate HP-H
Minimum 1.5" thick N/A N/A
Note: All layers of insulation and base sheet shall be simultaneously attached. See base sheet below for fasteners
and density. Refer to Roofing Application Standard RAS 117 for insulation attachment requirements.
Insulation shall have preliminary attachment, prior to the installation of the roofing membrane. At an
application rate of two fasteners per board for insulation boards having no dimension greater than 4 ft., and
four fasteners for any insulation board having no dimension greater than 8 ft.
Vapor Retarder: (Optional) Any UL or FMRC approved vapor retarder applied to the roof deck or over a base
layer of insulation.
Barrier: '/a",V, 'A",or 5/8" gypsum.
Membrane: Sure-Weld, Sure-Weld HS, Sure-Weld EXTRA, Reinforced, secured through the preliminarily
attached insulation as specified below.
Fastening#1: HPX Fasteners with Piranha Plates 6" o.c. through the membrane in the 5'/2" side lap in rows
spaced 6'o.c. followed by applying a I''A"wide heat weld.
Maximum Design Pressure-67.5 psf. (See General Limitation #7)
Fastening#2: HPX Fasteners with Piranha Plates 6" o.c. through the membrane in the 5'h" side lap in rows
spaced 8'o.c. followed by applying a 1'/2"wide heat weld.
Maximum Design Pressure-52.5 psf. (See General Limitation #7)
Maximum Design See Membrane Options Above
Pressure:
NOA No.: 17-0207.02
MIAM4DADE COUNTY Expiration Date: 08/31/23
APPROVED Approval Date: 08/16/18
Page 7 of 8
WOOD DECK SYSTEM LIMITATIONS:
1 A slip sheet is required with Ply 4 and Ply 6 when used as a mechanically fastened base or anchor sheet.
GENERAL LIMITATIONS:
1. Fire classification is not part of this acceptance, refer to a current Approved Roofing Materials Directory for fire
ratings of this product.
2. Insulation may be installed in multiple layers. The first layer shall be attached in compliance with Product Control
Approval guidelines. All other layers shall be adhered in a full mopping of approved asphalt applied within the
EVT range and at a rate of 20-40 lbs./sq.,or mechanically attached using the fastening pattern of the top layer
3. All standard panel sizes are acceptable for mechanical attachment. When applied in approved asphalt, panel size
shall be 4'x 4'maximum.
4. An overlay and/or recovery board insulation panel is required on all applications over closed cell foam insulations
when the base sheet is fully mopped. If no recovery board is used the base sheet shall be applied using spot
mopping with approved asphalt, 12" diameter circles, 24" o.c.;or strip mopped 8" ribbons in three rows,one at each
sidelap and one down the center of the sheet allowing a continuous area of ventilation. Encircling of the strips is
not acceptable. A 6"break shall be placed every 12' in each ribbon to allow cross ventilation. Asphalt application
of either system shall be at a minimum rate of 12 lbs./sq.
Note: Spot attached systems shall be limited to a maximum design pressure of-45 psf.
5. Fastener spacing for insulation attachment is based on a Minimum Characteristic Force(F')value of 275 lbf.,as
tested in compliance with Testing Application Standard TAS 105. If the fastener value,as field-tested,are below
275 lbf. insulation attachment shall not be acceptable.
6. Fastener spacing for mechanical attachment of anchor/base sheet or membrane attachment is based on a minimum
fastener resistance value in conjunction with the maximum design value listed within a specific system. Should the
fastener resistance be less than that required,as determined by the Building Official,a revised fastener spacing,
prepared,signed and sealed by a Florida Registered Engineer,Architect,or Registered Roof Consultant may be
submitted. Said revised fastener spacing shall utilize the withdrawal resistance value taken from Testing
Application Standards TAS 105 and calculations in compliance with Roofing Application Standard RAS 117.
7. Perimeter and corner areas shall comply with the enhanced uplift pressure requirements of these areas. Fastener
densities shall be increased for both insulation and base sheet as calculated in compliance with Roofing Application
Standard RAS 117 and/or RAS 137. Calculations prepared, signed and sealed by a Florida registered Professional
Engineer, Registered Architect, or Registered Roof Consultant (When this limitation is specifically referred
within this NOA,General Limitation#9 will not be applicable.)
8. All attachment and sizing of perimeter nailers,metal profile,and/or flashing termination designs shall conform with
Roofing Application Standard RAS 111 and applicable wind load requirements.
9. The maximum designed pressure limitation listed shall be applicable to all roof pressure zones(i.e.field,perimeters,
and corners).Neither rational analysis,nor extrapolation shall be permitted for enhanced fastening at enhanced
pressure zones(i.e.perimeters,extended corners and corners).(When this limitation is specifically referred
within this NOA,General Limitation#7 will not be applicable.)
10 All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or logo and
the following statement: "Miami-Dade County Product Control Approved" or the Miami-Dade County Product
Control Seal as shown below.
MANMADE COUNTY
APPROVED
11. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61G20-3 of the Florida Administrative Code.
END OF THIS ACCEPTANCE
NOA No.: 17-0207.02
MIAMFAp pEECOUNTY Expiration Date: 08/31/23
Approval Date:08/16/18
Page 8 of 8