1883 Beach Ave Siding Permit Submittal r '`L"'i-,,\ Building Permit Application Updated 10/9/18
,t'
: Vj City of Atlantic Beach Building Department **ALL INFORMATION
; 4 800 Seminole Road, Atlantic Beach, FL 32233
HIGHLIGHTED IN GRAY
n 0 IS REQUIRED.
Phone: (904) 247-5826 Email: Building-Dept@coab.us
Job Address: 188 3 awl, Ave 441a,,4,t. L Foch, R. 32233 Permit Number:
Legal Description /,j-O5.7 9-,23- G/4E/N. 4/4144, 6,--4ci ci,,,,.tA?A0/e45 &N7 2E# /694.85- OX1f7
Valuation of Work(Replacement Cost)$ 8o K. Heated/Cooled SF Non-Heated/Cooled
• Class of Work: ❑New ❑Addition Iteration ❑Repair ❑Move ❑Demo DPool ❑Window/Door
• Use of existing/proposed structure(s): ❑Commercial ,lafiesidential
• If an existing structure, is a fire sprinkler system installed?: DYes ,01Vo
• Will tree(s) be removed in association with proposed project? ❑Yes (must submit separate Tree Removal Permit) ,.LTNo
Describe in detail the type of work to be performed: Re-enc./Al o'C eX041,12 ,y'lvcc.c d'aaeer Afia insf'.t I/ 5.1411
IJA-P•rPApo .,! -r .e -:.,r eF futhias
Florida Prodict Approval# for multiple products use product approval form
Property Owner Information
Name 3 h r-+ X;,,,,ne I Address 1883 Bead A'-e
City Af/an ie,. (3eq,cl, State FL. Zip 32233 Phone 901i- 313 - 3487
E-Mail
Owner or Agent(If Agent, Power of Attorney or Agency Letter Required)
Contractor Information
Name of Company Aurorra (3v,l o/rr; Qualifying Agent /'),'chAc1 /<. Ler,Ahen
Address Po iSox 3,29 City Poatc Venlr.q State FL. Zip 3Zooy
Office Phone 5'0'1 -.Z tit — 5-4/00 X -/Q7 Job Site Contact Number q/Z — /77- 37013
State Certification/Registration# CSC -1x513'9 I E-Mail j e g a Aur)C4 b ui Idle ri . Gosh
N
Architect Name& Phone# VA
Engineer's Name& Phone# /✓/q
Workers Compensation Insurer OR Exempt Expiration Date 1- /C- 2c701
Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulating
construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING, SIGNS,
WELLS, POOLS, FURNACES, BOILERS, HEATERS,TANKS,and AIR CONDITIONERS,etc. NOTICE: In addition to the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county, and
there may be additional permits required from other governmental entities such as water management districts,state agencies,or
federal agencies.
OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YOU' .'OTIC •F,COM,., ENCEMENT. ... <
_k____
A
gnature o Owner or Agent) (Signature of Contractor)
Signed and sworn to(or affirmed) before me this n1day of S.• ;d and sworn to,(or a irme before me thise13 day of
Set ,ZO U b fU la 11(E1 ....A�'�w • a , y o6-16,�.A✓ie _-
Terry Hendry �� a o2
(Signa ire of Notary)
Notary Public ( '04,', FLORINDA R.CNRISMAN
._ State of Florida �_• �.': Notary Public-State of Florida
'-4 My i ion Expires 11/30/2021 ( . Commission r GG 935204 P [ ] rsonally Known OR I or h My Comm.Expires Feb 9,2024
1.4;i1
9� .atioq 172
rof Id ed Idcatio c: n [ Produced Identification f Bonded through National Notary Assn.
Type of Identification: fl I�U(�t5 Li Type of Identification:
•
• , S 3`t
•
• .�.
NOTICE OF COMMENCEMENT
State of Flor'tclA Tax Folio No. 169 685- - CO
County of D u r,q
To Whom It May Concern:
The undersigned hereby informs you that improvements will be made to certain real property, and in accordance with Section 713
of the Florida Statutes,the following information is stated in this NOTICE OF COMMENCEMENT.
Legal Description of property being improved: 15 - 057 • a9 E _
/V. 44-14n f<< BeAcI ON,f a Go+ 45 EX ,/ �/z
Address of property being improved: 1683 ReAcI Pave Bew t,, FL 3 ZZ 033 _
General description of improvements: 12eiv,ov41 eact3174 , 3+0 cco ve,.)ee, Ar,,J no 3+'A //,q+,o,.,
0- 3rd n$ . EJrrice prbo;m y And dee it;n I of p,4+to s _
Owner: S*)Arf lk;mm r I Address: 1633 Brack lave. Mi nik. QewcJ,� R 3 2233
Owner's interest in site of the improvement: Pee 5ra pk
Fee Simple Titleholder(if other than owner):
Name:
Contractor: qurocA 8ui)ale,,5 _
Address: PO c,y. 3.2 9 Poa Vedr#4 F 3ZGUy
Telephone No.: 90y- aq G- SyOO Fax No:
Surety(if any) /v/,g
Address: Amount of Bond$
Telephone No: Fax No:
Name and address of any person making a loan for the construction of the improvements
Name: NV,e)
Address:
Phone No: Fax No:
Name of person within the State of Florida,other than himself,designated by owner upon whom notices or other documents may
be served: Name: /VA
Address:
Telephone No: Fax No:
In addition to himself, owner designates the following person to receive a copy of the Lienor's Notice as provided in Section
713.06(2) (b), Florida Statues. (Fill in at Owner's option)
Name: w/,g
Address:
Telephone No: Fax No:
Expiration date of Notice of Commencement (the expiration date is one(1)year from the date of recording unless a different date is
specified):
THIS SPACE FOR RECORDER'S USE ONLY OWNER
Terry Hendry Signed: Date: V/7/2-"�
A(( Notary Public Before me this 11 frh day of 54)t. 2DL0 in the C9unty of Duval,State
J State of Florida 'Of Florida,has personally appeared to e.eut Kl vv11Nle-
�i► MyCAmmission Expires 11/30/2021 Notary Public at Large,State of Florida,County of Duval.
Conunission No.G('155172 My commission expires: l l' 3a"c9--
Personally Known: or
Produced Identification: Or LLY-e.A Lt G_
. •-
.,
•'
•
•
•
•
.• , • • •••
. . 4
. •
•
•
'•,
..•
• • ';
re"01 vroir
).‘)
taINIBE. 't vtoi '
Construction Site Management for Exterior Renovation
Project: Stuart Kimmel
1883 Beach Ave Atlantic Beach, FL 32233
1. Parking Plan—All vendors will be parking in the public spaces on (18th) street and walking to the
site as the dumpster and the chemical toilet will be located in the driveway.
2. No trailers will be on site. Vendors will unload at the site and park in the public spaces at (18th)
street.
3. Chemical toilet will be located in the private driveway on the right side.
4. 5 yard dumpster will be located in the private driveway in front of the garage.
5. All deliveries will need to be made to the driveway in front of the dumpster and immediately
relocated to the yard.
6. Site is to remain clean
7. Erosion Control- No earth is to be disturbed,there is a 6' fence that surrounds the property.
9/14/2020 Duval Property Map
PROPERTIES _
-
CL 4
DUVAL MAPS _
1 .
tool IIII! .' t:i
41t...
I
. .,•
/
Ii
412 I . . I-
W4*
- „,_
It. ,: r
401 -
- i so , ._
ECG) ,... .. ...mir
# ... • ,
....
• '4 4 •48 4 . ire a I
'
i • 1,
..,.
ir °ill _j______ 'IN • *4. Ili 4 ,,.... .
. .
a. iit• .. -, * ...... 4.. .401
. t ..„
.0 0
1 a _Idt-Sap- IPor
. 1
r _..........iii r
. 24
. ,.,
.5,
1 I
87
-01.1
, • - - ' ,li ,.
r• , .
41)/A I a it __ _ ....._
_ . NW"
a iimo - ti , , 111F.e- 1
... - '
-. ).
„rat.
et. *I ibillilli
a 'lir -
_
...
.1
4. votbe r ., 24IP'
-
iii 1 1 7411142 . . r
• -•
• i
D I 1 1 ,. I '. • 4* ••• '
.1, . • ' . ,
,-, 8 er
NO
4 it it 4 a'
a IP 1885
I
7. daZ
til
.
ii .'' 111A itril'-fitiL
• i
ip - Ale
i .abilitig ,v _ 4 . Vim.
r ... .
: —
liii77-11111'111"" . • • . ...
• .. - 7_ .a. ' W II ,I,
Or"
.0, •_
=
4
o e#
°°214113:1 "Ve• o. 4 4 a
i •. dt.
1 ,
" 44 41 it
.4.. _
. ...
.., . ...
. ,
. . 1004
It- i
-•
N %
wir ..-
. NEI , r • .•
maps.coi.net/duvalproperty/defaultaspx?img=img&RE=169685-0000 1/1
ft';'- '
�� PRODUCT APPROVAL INFORMATION SHEET FOR THE CITY OF ATLANTIC BEACH, FLORIDA (*REQUIRED)
*Project Address: 1883 Lae, dt Ave c}N4,4.-c. ReArA, FL 3 Z233 Permit#:
*Owner/Project Name: 3- Art Kr,,, me I
As required by Florida Statute 553.842 and Florida Administrative Code Rule 9B-72, please provide the information and product approval number(s)for
the building components listed below as applicable to the building construction project for the permit number listed above. You should contact your
product supplier if you do not know the product approval number for any of the applicable listed products. Information regarding statewide product
approval may be obtained at: www.floridabuilding.org.
Category/Subcategory Manufacturer Product Description Limitation of Use State# Local#
A. EXTERIOR DOORS
1. Swinging
2. Sliding
3. Sectional
4. Garage Roll-Up
5.Automatic
6. Other
B.WINDOWS
1. Single hung
2. Horizontal slider
3. Casement
4. Double hung
5. Fixed
6. Awning
7. Pass-through
8. Projected
9. Mullion
10. Wind breaker
11. Dual action
12. Other
Page 1 of 4 Updated 10/17/18
Category/Subcategory Manufacturer Product Description Limitation of Use State# Local# _
C. PANEL WALL
1. Siding Cel«+ by Rata!, q„k,1 PVc. 5;d;ng f=L /7037-r23
2.Soffits
3. EIFS
4. Storefronts
5. Curtain walls
6. Wall louvers
7.Glass block
8. Membrane
9. Greenhouse
10.Synthetic stucco
11. Other
D. ROOFING PRODUCTS
1.Asphalt shingles
2. Underlayments
3. Roofing fasteners
4. Nonstructural metal
roof
5. Built-up roofing
6. Modified bitumen
7.Single ply roofing
8. Roofing tiles
9. Roofing insulation
10. Waterproofing
11. Wood shingles/shakes
12. Roofing slate
13. Liquid applied roofing
14. Cement-adhesive
coats
15. Roof tile adhesive
16. Spray applied
polyurethane roof
17. Other
Page 2 of 4 Updated 10/17/18
Category/Subcategory Manufacturer Product Description Limitation of Use State# Local#
E. SHUTTERS
1. Accordion
2. Bahama
3. Storm panels
4. Colonial
5. Roll-up
6. Equipment
7. Other
F.STRUCTURAL
COMPONENTS
1. Wood
connector/anchor
2.Truss plates
3. Engineered lumber
4. Railing
5. Coolers-freezers
6. Concrete admixtures
7. Material
8. Insulation forms
9. Plastics
10. Deck-roof
11. Wall
12. Sheds
13. Other jme.,e4 . Ply - U K �,J,rf�p S r/�.K FL /5-o27.2.
G. SKYLIGHTS
1. Skylight
2. Other
H. NEW EXTERIOR
ENVELOPE PRODUCTS
1.
2.
Page 3 of 4 Updated 10/17/18
In addition to completing the above list of manufacturers, product description and State approval number for the products used on this project, the
Contractor shall maintain on the job site and available to the Inspector, a legible copy of each manufacturer's printed specifications and installation
instructions along with this Product Approval Sheet.
I certify that this product approval list is true and correct to the best of my knowledge. I further certify that use of different components other than the
ones listed in this document must be approved by the Building Official.
*Contractor Name (Print Name): ���+ Q.r(,�( *Contractor Signature: deeel
*Company Name: g3..JJ,..)
*Mailing Address: f o Bog 329
*City: itd !/c.,[,,. *State: f . *Zip Code: 32ooy
*Telephone Number: 4ale ?De/ 2yt Stioo *E-mail Address: /-o6t/ jelT Gam' .�a��,.,o /40fife Cell Phone Number: y/2 f77 Sva Fax Number:
Page 4 of 4 Updated 10/17/18
9/15/2020 Florida Building Code Online
M,/i Yww
MONICA •
OIPAFb INT or - mLV. _
usiness & Professional Regulation ,. , . 411 ,,
TDBPR HOME ABOUT DBPR DBPR DIVISIONS CONTACT
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats&Facts Publications Contact Us BCIS Site Map Links ! Search
d Florida
prProduct Approval
USER:Public User
Product Approval Menu>Application Detail
FL# FL17037-R3
Application Type Revision
Code Version 2017
Application Status Approved
*Approved by DBPR. Approvals by DBPR shall be reviewed and ratified by
the POC and/or the Commission if necessary.
Comments
Archived
Product Manufacturer Royal Building Products
Address/Phone/Email 91 royal group crescent
woodbridge, NON-US 14h1x9
(662) 705-0610
stan.hathorn@axiall.com
Authorized Signature Stan Hathorn
Stan.Hathorn@royalbuildingproducts.com
Technical Representative Stan Hathorn
Address/Phone/Email 312 Sloss Circle
Trussville,AL 35173
(662) 705-0610
stan.hathorn@axiall.com
Quality Assurance Representative Stan Hathorn
Address/Phone/Email 312 Sloss Circle
Trussville,AL 35173
(662) 705-0610
stan.hathorn@axiall.com
Category Panel Walls
Subcategory Siding
Compliance Method Evaluation Report from a Product Evaluation Entity
Evaluation Entity IAPMO Uniform Evaluation Services LLC.
Quality Assurance Entity Architectural Testing,Inc.,an Intertek Company
Quality Assurance Contract Expiration Date 12/31/2020
Validated By Steven M. Urich, PE
Validation Checklist- Hardcopy Received
Certificate of Independence FL17037 R3 COI CERTIFICATE OF INDEPENDENCE IAPMO ES 2014.pf
Referenced Standard and Year(of Standard) Standard Year
D3679 2011
Equivalence of Product Standards
Certified By
Sections from the Code
haps://floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgv2aBQpHpOQe8yj09bhfsig7B3xyQGhq6SZpEuHPboleQ%3d%3d 1/2
9/15/2020 Florida Building Code Online
Product Approval Method Method 1 Option C
Date Submitted 01/26/2018
Date Validated 01/26/2018
Date Pending FBC Approval
Date Approved 01/30/2018
Summary of Products
FL# Model,Number or Name Description
17037.1 Celect Cellular Siding 7" Reveal
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL17037 R3 II Celect Cellular V2 Guide 614.Q.df
Approved for use outside HVHZ:Yes Verified By: IAPMO Uniform Evaluation Services LLC.
Impact Resistant: N/A Created by Independent Third Party:
Design Pressure: +0/-110.6 Evaluation Reports
Other:Allowable negative design pressure listed.Allowable FL17037 R3 AE E1595 R0368 Royal Buildirlg,Rdf
positive design pressures are dependent on the capacity of the
solid sheathing substrate to withstand the positive wind forces.
17037.2 Celect Cellular Siding 4" Reveal
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL17037 R3 II Celect Cellular V2 Guide 614.raf
Approved for use outside HVHZ: Yes Verified By: IAPMO Uniform Evaluation Services LLC.
Impact Resistant: N/A Created by Independent Third Party:
Design Pressure: +0/-196.5 Evaluation Reports
Other:Allowable negative design pressure listed.Allowable FL17037 R3 AE E1595 R0368 Royal Building,Rdf
positive design pressures are dependent on the capacity of the
solid sheathing substrate to withstand the positive wind forces.
17037.3 Celect Cellular Siding 8" Board and Batten
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL17037 R3 II Celect Cellular V2 Guide 614.ps f
Approved for use outside HVHZ: Yes Verified By: IAPMO Uniform Evaluation Services LLC.
Impact Resistant: N/A Created by Independent Third Party:
Design Pressure: +0/-96.2 Evaluation Reports
Other:Allowable negative design pressure listed.Allowable FL17037 R3 AE E1595 R0368 Royal Building,Rdf
positive design pressures are dependent on the capacity of the
solid sheathing substrate to withstand the positive wind forces.
17037.4 Celect Cellular Siding 7" Perfection Shingle
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL17037 R3 II Celect Cellular V2 Guide 614.p.a
Approved for use outside HVHZ:Yes Verified By: IAPMO Uniform Evaluation Services LLC.
Impact Resistant: N/A Created by Independent Third Party:
Design Pressure: +0/-123.9 Evaluation Reports
Other:Allowable negative design pressure listed. Allowable FL17037 R3 AE E1595 R0368 Royal Buildingmlf
positive design pressures are dependent on the capacity of the
solid sheathing substrate to withstand the positive wind forces.
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 phone;850-487-1824
The State of Florida is an AA/EEO employer.Cgpy.nght 2007-2013 State of Florida. ::privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.*Pursuant to Section 455.275(1),
Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if they have one.The emails
provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal address,please
provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,please click here.
Product Approval Accepts:
®® ® aC*ck111
Credit Card
Safe
securitvell_TRIcs
https://floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgv2aBQpHpQQe8yj09bhfsig7B3xyQGhq6SZpEuHPboleQ%3d%3d 2/2
' 13
C E L E C T HORIZONTAL SIDING & TRIM INSTALLATION GUIDE
Using Padded Out V2 PVC Trim
CELLULAR EXTERIORS BY ROYAL
Storage Fasteners
If bundles are to be stored outside,do not lay them directly on the ground.Lay • Siding
them on wood supports(e.g.2X4) • Corrosion-resistant nails(stainless steel nails or galvanized roofing
Do not store under tarps. nails)with a minimum head diameter of/a",'/e'shank and length
Do not store bundles upright. enough to penetrate framing or furring'/,".
Do not store bundles more than 5 high. • Corrosion resistant,#8 truss or pan head screws with a length
Keep away from heat sources. sufficient to penetrate a solid nailable surface(framing or furring)a
Wall Preparation minimum of 1-1/4"in depth.
Celect siding is a rain screen but not intended to be a water resistive barrier. Trim
Therefore,Celect siding must be installed over a continuous water-resistive • Celect Cortex screws and plugs are recommended to secure finished
barrier with properly integrated flashing. Celect Trim pieces.
New Construction • If other trim fasteners are used,they must be fasteners intended for
Celect must be applied over rigid nailable sheathing that provides a smooth flat exterior use with PVC trim such as stainless steel or hot dipped
surface. Never install Celect siding directly to open framing/studs. galvanize.
Re-siding • DO NOT USE staples,small brads,ring shank or wire nails.
It may not be necessary to remove existing siding providing all loose boards • For"padding out"finished trim,fasteners should be long enough to
are re-secured and any rotten boards are replaced. Install furring strips or wall penetrate the solid wood substrate a minimum of 1 '/2'.
leveling siding underlayment to create a flat surface for the siding. • Professional grade PVC adhesive for joining trim pieces. PVC
adhesive along with Cyanoacrylate(super glue)and activator as a
Cutting "clamp"can be used.
Siding
Circular or miter saws with a trim or plywood blade.
Jig saw,rotary tools(Dremel,router,etc.)can be useful for cutting around obstructions.
Trim
The use of a compound miter saw with a trim blade is recommended.
Key Vocabulary
• Course-Row of siding panels,one panel wide,running the length of the wall.
• Center Pin-placing a nail at both ends of a nailing slot to force the movement of the panel left and right of that slot.
• Pocket-Space created behind the trim to hide or cover the panel ends so as to allow the expansion and contraction of the panel(s)without it being visible.
Key Rules
• Nail in the center of the nailing slot unless pinning is necessary.
• Fasteners must be placed in the center of the nailing slots at approximately 16"spacing leaving about'/32"between the head of the fastener and the nailing
hem of the panel.Celect panels expand and contract through temperature changes.
• Never face nail the panels.
Celect Installation
• After preparing the walls for the siding Installation Sequence /
Flash g
installation(see Wall h
Preparation pg. 1), install 1X2 furring 0 Weather Barrier&Flashings - d 21/2"Siding
around all windows,doors,outside
corners,etc.This must be done 0 Furring strips for trim
�� Leve ination
M�
anywhere the ends of the siding will be �urring Strips—� jX /
terminated(Fig 1-2). 0 Inside Corner Posts �//l _ - -,�
• Make sure to install the proper flashing
Lt.) Window Heade
as required by specific local building Q Starter Strip for Panels i I L • ~-
codes(Fig 2) I ,
NOTE:if the furring strips will be completely 0 Celect Siding Panels
hidden by the trim, I 1X2 Furring Strip r
treated 1X2 furring can be used in place of 0 Window,Door,Etc.Trim I r
PVC strips. \ Fig.1 ;, \ , Fig.2 /
Secure the furring every 8"- 12".
• Install starter strip along the bottom of the wall fastening every 8"-12" ; ` um�9 Strips > Install insiie corners
P
(Fig.3). In certain situations,it may be necessary to remove a bottom
section from of the panels to accommodate variations in the first course ✓ \ '
such as porch floors,etc. In these situations,where the bottom lock is 4"
removed,the cut edge of the panel(s)must be covered by trim. Due to
the limited expansion and contraction of the panels vertically,the face of r
the channel or trim only need be wide enough to cover the cut edge of the
panel by 1/2"(Fig 4). 1"gap on courses longer f Min.'/i'gap 1 •
than 12',1/2"gap on N,
• Install any inside corners.Fasten the inside corners using weather courses shorter than 12'
resistant screws placed inside the pocket of the corner no more than 16" w Fig.3
apart(Fig 5). Unlike the other finished trim,inside corners are applied Fig 5
before th siding.
NOTE:Make sure not to draw the pocket in when fastening to the wall.
The pocket width must remain 3/4". Use a scrap piece of siding as a -�
spacer in the pocket.The inside of the corner post should not lay against Min.'/z'co Fig.4
the siding. \ J
91 Royal Group Crescent,Woodbridge,Ontario,Canada L4H 1X9 11.800.387.2789 I royalbuildingproducts.com .A'ROYA L Building Products
�: C E L E C T HORIZONTAL SIDING & TRIM QUICK GUIDE (CONT.)
CELLULAR EXTERIORS BY ROYAL
• Install the Celect siding panels keeping the ends of the __ 7
panels 1"away from the furring strips if the course is over f = —,,,— _.■
12'long, 1/2"away if the course is less than 12'long.
• Fasten the panels by placing a fastener in the center of the 1/2"gap If course is shorter than 12' L' n
IIIIII
slot approximately every 16"leaving about 1/32"between the and no center oln of course necessary.
head of the fastener and the nailing hem of the panel. n
Celect panels expand and contract through temperature '1,--....
changes. (Fig.6). `_
•
'3 c----__ , ,--.--. a e.. e---,
• If the course is longer than 12'pin the center of the course LL ( .
(not each panel)by placing a fastener in each side of one ��
slot keeping in mind that the"center"of each course will .4— gap if course is longer than 12'
change as you work around windows,doors,etc.(Fig.7). and center pin the course. Center pin or box nail
Icenter of each course
• Celect siding panels can be installed continuously up to Fig.6 over 12' Fig.7
60'.If the siding courses are longer than 60',break the J NOT each panel J
course(s)with an expansion joint.This joint can be
fabricated using furring strip and 1'X6"(Fig.8). o — ---r---_-__ ---
less than 30'�P 4--more than 30.--t•
Longer than 60' 4�expansio {center pin cou��e.'/';
PIN PANELS .�
THIS END--- �,��„ 1"gap
1X2 Furring Strip
\ 1/2"off of i 1 `
1/2"off roof line
- •rooftine i r
with no channel.
--sem�' ~ii
L
Less than 30' More than 30'
Expansion Joint \` Fig 9 I
r Fig.1_0}
Fig.8
• Fixture mounts can be field constructed using Cellular PVC,wood,etc.The pocket
depth must be 2"for courses over 12'and 3/4"for courses under 12'to allow for the
appropriate expansion gap.
• For courses under 12'preformed vinyl siding fixture mounts can be used. In this case, o
the expansion gap should be 3/8"(Fig 11).
Fixture Block
Fig.11
/K._ `\
• Depending upon the trim you choose to you use to finish the top of the wall, measure and
cut the top course panel to fit. Due to the limited expansion and contraction of the panels
vertically,the face of the channel or trim only need be wide enough to cover the cut edge
of the panel by W.
• Install the panel securing it by placing nails along the cut edge of the panel approximately
every 16".DO NOT FACE NAIL THE PANEL.The head of the nails will hold the panel r�
back to the wall and the shaft of the nail will keep the panel from raising and becoming Cut top of siding
unlocked from the panel below it(Fig 12).
Fig. 12 J
• Install trim over furring strips(Fig. 13-14). It is easiest to assemble I" '
window and door trims before applying them to the wall.When using ���
Celect trim,be sure to build the trim slightly larger(ur"each side)than the
window or door to give the finished frame room to expand and contract „_'i through temperature changes. �'�>�• Cortex screws and matching plugs should be used when installing Celect V �trim.Space the fasteners no more than 16"apart and no closer than 2" • i....,:::,..:::
% \\\ \j \from the end of the trim. Make sure not to fasten through the siding or into ;
the expansion pocket(Fig 14). 1\
d'f \\ 1
•
Fig.13 v/- )./(
/ Fig 14�
91 Royal Group Crescent,Woodbridge,Ontario,Canada L4H 1X9 11.800.387.2789 I royalbuildingproducts.com %AO ROYAL Building Products 2
EVALUATION REPORT Number 368
TM Originally Issued: 2/01/2015 Revised: 11/15/2017 Valid Through: 2/29/2018
ROYAL BUILDING PRODUCTS capacity of the solid sheathing substrate to withstand the
positive wind forces.
CELECT CELLULAR SIDING
3.2 Installation: Installation of Royal Building Products'
CSI Section: 07 46 33 Plastic Siding Celect Cellular Siding shall be in accordance with the
manufacturer's published installation instructions, the
1.0 RECOGNITION applicable code and this report. The siding panels shall be
installed in accordance with the installation instructions to
Royal Building Products Celect Cellular Siding products allow movement of the siding panels due to temperature
described in this report were evaluated for use as exterior changes. The panels shall be fastened at the maximum on-
covering materials for walls as part of the weather-resistant center spacing given in Table 1,to minimum 0.42-specific-
exterior wall envelope. The exterior veneer,wind resistance, gravity wood substrate. The fasteners shall be corrosion-
and installation properties of the Celect Cellular Siding resistant roofing nails having minimum 1/8-inch-diameter
products were evaluated.The siding products are satisfactory shanks,3/8-inch-diameter heads, and shall be minimum 11/2
alternatives to those prescribed in the following codes: inches long,or equivalent;or corrosion-resistant No.8 truss-
head screws minimum 11/4 inches long, or equivalent, as
• 2015, 2012, 2009, and 2006 International Building described in Table 1.
Code®(IBC)
• 2015, 2012, 2009, and 2006 International 4.0 PRODUCT DESCRIPTION
Residential Code®(IRC)
• 2017 and 2014 Florida Building Code, Building, Royal Building Products Celect Cellular Siding is an
and Florida Building Code, Residential — See alternative siding to those prescribed in IBC Section 1404.9
attached Supplement and IRC Section R703.11.Celect Cellular Siding is made of
polyvinyl chloride(PVC)with an expanded core.
Celect Cellular Siding is for use in Type V Construction and
buildings constructed in accordance with the IRC. Celect Royal Building Products Celect Cellular Siding is available
Cellular Siding may also be used in Construction Types I - in 4-inch and 7-inch horizontal clapboard profiles, 7-inch
IV in accordance with Section 1406.2 of the IBC. Perfection Shingle shake profile, and 8-inch Board and
Batten vertical profile siding. The 7-inch clapboard and 7-
2.0 LIMITATIONS inch shake profiles are similar except for the shake texture.
The 4-inch clapboard siding is packaged in 12 foot-6 inch
Use of the Royal Building Products Celect Cellular Siding (3.81 m) lengths. The 7-inch clapboard siding is packaged
recognized in this report is subject to the following in 12 foot-4 inch (3.76 m) lengths. The Perfection Shingle
limitations: is packaged in panels 48 inches(1.22 m)long.The Board&
Batten is packaged in 10-foot(3.05 m)lengths.
2.1 The Siding shall be installed in accordance with the
applicable code, the manufacturer's published installation 5.0 IDENTIFICATION
instructions, and this report. Where there is a conflict, the
most restrictive shall govern. A label shall be affixed on the packaging and shall include
the Royal Building Products name or trademark, the
2.2 Royal Building Products Celect Cellular Siding shall be manufacturer's address, the product model number, the
installed over solid sheathing capable of resisting the design IAPMO Uniform ES Mark of Conformity,and the Evaluation
wind pressures. Report Number (ER-368). Either Mark of Conformity may
be used as shown below:
2.3 Flashing and water-resistive barrier shall be installed as
required by the applicable code.
3.0 PRODUCT USE
3.1 Design: Design wind pressures shall be determined in IAtr\li
accordance with Section 1609 of the IBC or R301.2.1 of the
IRC, as applicable, and shall not exceed the allowable
pressures tabulated in this report for use of Celect Cellular
Siding. The allowable negative wind pressures for Royal Or TM
Building Products Celect Cellular Siding are shown in Table IAPMO UES ER-368
1. Allowable positive pressures are dependent on the
UAW
The product described in this Uniform Evaluation Service(UES)Report has been evaluated as an alternative material,design or method of construction in order to satisfy and comply with
CNE/
the intent of the provision of the code,as noted in this report,and for at least equivalence to that prescribed in the code in quality,strength,effectiveness,fire resistance,durability and safely,
as applicable,in accordance with IBC Section 104.11.This document shall only be reproduced in its entirety. /��/c
Copyright®2017 by International Association of Plumbing and Mechanical Officials.All rights reserved.Printed in the United States. Ph:1-877-4IESRPT•Fax:909.472.4171 Nft�7I
web:www.unifomes.org•4755 East Philadelphia Street,Ontario,California 91761-2816—USA
%II*
EVALUATION REPORT Number 368
TM Originally Issued: 2/01/2015 Revised: 11/15/2017 Valid Through: 2/29/2018
6.0 SUBSTANTIATING DATA 7.0 CONTACT INFORMATION
6.1 Reports of testing in accordance with ASTM D3679 as Royal Building Products
required by ICC-ES Acceptance Criteria for Vinyl Siding 328 Industrial Drive
(AC37),dated February 2014. Bristol,Tennessee 37620
(276)783-8161
6.2 Data in accordance with ICC-ES Acceptance Criteria for Website:www.royalbuildingproducts.com
Rigid Cellular PVC Non-load-bearing Exterior Trim
(AC227), dated December 2004 (editorially revised June 8.0 STATEMENT OF RECOGNITION
2012)as follows:
o Reports of deflection temperature testing in This evaluation report describes the results of research
accordance with ASTM D648. carried out by IAPMO Uniform Evaluation Service on
o Reports of density properties testing in accordance Royal Building Products Celect Cellular Siding
with ASTM D792. manufactured in Bristol, Tennessee to assess its
o Reports of flexural properties testing in accordance conformance to the codes shown in Section 1.0 of this
with ASTM D790. report, and serves as documentation of the product
certification.
6.3 Reports of ASTM D7254 impact resistance testing in
accordance with ICC-ES Acceptance Criteria for '? ,
Polypropylene Siding(AC366),dated April 2007(editorially )/,•p �,1,,fw
revised April 2011). Brian Gerber,P.E.,S.E.
6.4 Reports of wind resistance testing in accordance with Vice President,Technical Operations
ASTM D5206. Uniform Evaluation Service
6.5 Reports of testing in accordance with Section 3.3 of ICC-
ES AC37, dated February 2014 to determine an alternative
pressure equalization factor for this siding product. Richard Beck,PE,CBO,MCP
Vice President,Uniform Evaluation Service
6.6 Reports of ignitability testing in accordance with NFPA
268.
6.7 Quality control documentation. GP Russ Chane
CEO,The IAPMO Group
For additional information about this evaluation report please visit
www.uniform-es.org or email at info(a)uniform-es.org
Page 2 of 4
1144
EVALUATION REPORT Number 368
TM Originally Issued: 2/01/2015 Revised: 11/15/2017 Valid Through: 2/29/2018
T:U13LE 1— MAXIMUM ALLOWABLE NEGATIVE WIND PRESSURES FOR CELECT CELLULAR
SIDING
Exposure Allowable Negative
p 2 Spacing Attachment
Siding Profile Fastener Type a Wind Pressures
(in.) (in.) Substrate (Ps01
ea
1.25"No.8 truss head screws 16 Into Son,ything 136.8
16 Into Sheathing 72.1
Horizontal 7-inch only
Clapboard 7 1.5"smooth-shank roofing 8 Into Sheathing 96.2
nails only
16 Through Sheathing 110.6
into Framing
Horizontal 4-inch I.5"smooth-shank roofing Through Sheathing
Clapboard 4 nails 16 into Framing 196.5
Horizontal 7-inch 1.5"smooth-shank roofing Through Sheathing
Shake 7 nails 16 into Framing 123.9
Vertical 8-inch 1.5"smooth-shank roofing Into Sheathing
Board&Batten 8 nails 12 only 96.2
For SI: 1 inch=25.4 mm,1 psf=47.9 N/m2
1. Indicates maximum allowable wind pressures for the siding fastened using the fastener types and on-center spacing indicated in the columns above.
2. The roofing nails shall have minimum 3/g-inch-diameter heads,Vg-inch-diameter shanks,and 1'/4-inch embedment into the substrate.
3. The attachment substrate shall have specific gravity of 0.42 minimum.
I 5.411 in. 1
T-? ._...
0.629 in. ----I~
I r/ 0.358in.-1
Horizontal 4-inch Clapboard
8.470 in.
II__________,
0.678 in. J
1 S1 0.358 in.
Horizontal 7-inch Clapboard&Horizontal 7-inch Shake
9.153 in.
I 1 i
0.749 in. --
1
0.327 in.-1
Vertical 8-inch Board&Batten
FIGURE 1—SIDING PROFILES
Page 3 of 4
kitt
EVALUATION REPORT Numbe 368
rM Originally Issued: 2/01/2015 Revised: 11/15/2017 Valid Through: 2/29/2018
Florida Supplement
ROYAL BUILDING PRODUCTS Use of the Royal Building Products Celect Cellular Siding
Profiles for compliance with the high-velocity hurricane zone
CELECT CELLULAR SIDING (HVHZ) provisions of the FBC, Building and FBC,
Residential has not been evaluated and is outside the scope of
CSI Section: 07 46 33 Plastic Siding this evaluation report.
1.0 RECOGNITION For products falling under Florida Rule 61G20-3,verification
is required that the report holder's quality assurance program
Royal Building Products Celect Cellular Siding Profiles is audited by a quality assurance entity, approved by the
described in IAPMO UES Evaluation Report ER-368 are Florida Building Commission(or the building official when
satisfactory alternatives to the cladding systems prescribed in the report holder does not possess an approval by the
the following codes: Commission), to provide oversight and determine that the
products are being manufactured as described in this
• 2017 and 2014 Florida Building Code, Building evaluation report to establish continual product performance.
(FBC,Building)
• 2017 and 2014 Florida Building Code, Residential 3.0 CONTACT INFORMATION
(FBC,Residential)
Royal Building Products
2.0 LIMITATIONS 328 Industrial Drive
Bristol,Tennessee 37620
Installation shall be in accordance with ER-368, the (276)783-8161
manufacturer's published installation instructions, and Website: www.royalbuildingproducts.com
Section 1405 of the FBC, Building or Section R703 of the
FBC, Residential, as applicable. Flashing shall comply with
Section 1405.4 of the FBC,Building. For additional information about this evaluation report please visit
www.uniform-es.org or email at info(a;uniform-es.org
For buildings built in accordance with the FBC, Residential,
design wind loads for cladding shall be determined in
accordance with Tables R301.2(2)and R301.2(3),as required
by Section R301.2.1 of the FBC,Residential;when required,
conversion between Vw,(Ultimate Design Wind Speed) and
V (Nominal Design Wind Speed) shall be in accordance
with R301.2.1.3 of the FBC, Residential. For buildings built
in accordance with the FBC,Building,design wind loads for
cladding shall be determined in accordance with Section
1609.1.1 of the FBC, Building; when required, conversion
between V, and Vasd shall be in accordance with 1609.3.1 of
the FBC,Building.Allowable design pressures determined in
accordance with the FBC shall not exceed those in Table 1 of
ER-368.
Page 4 of 4