Loading...
530 Selva Lakes Cir RES20-0335 Permit PacketOWNER:ADDRESS:CITY:STATE:ZIP: MARTIN ROBERT RIX 530 SELVA LAKES CIR ATLANTIC BEACH FL 32233 COMPANY:ADDRESS:CITY:STATE:ZIP: SUPER SIDERS AND TRIM, INC 2700 Fawn Point Dr Jacksonville FL 32225 TYPE OF CONSTRUCTION: REAL ESTATE NUMBER:ZONING:BUILDING USE GROUP:SUBDIVISION: 172027 5594 SELVA LAKES UNIT 02 JOB ADDRESS:PERMIT TYPE:DESCRIPTION: VALUE OF WORK: 530 SELVA LAKES CIR RESIDENTIAL SIDING SIDING AND HOUSE WRAP $18000.00 FEES DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT BUILDING PERMIT 455-0000-322-1000 0 $145.00 BUILDING PLAN CHECK 455-0000-322-1001 0 $72.50 STATE DBPR SURCHARGE 455-0000-208-0700 0 $3.26 STATE DCA SURCHARGE 455-0000-208-0600 0 $2.18 TOTAL: $222.94 LIST OF CONDITIONS Roll off container company must be on City approved list . Container cannot be placed on City right-of-way. NOTICE: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be found in the public records of this county, and there may be additional permits required from other governmental entities such as water management districts, state agencies, or federal agencies. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR NOTICE OF COMMENCEMENT. MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION. ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES . ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY. 1 of 2Issued Date: 12/9/2020 PERMIT NUMBER RES20-0335 ISSUED: 12/9/2020 EXPIRES: 6/7/2021 RESIDENTIAL PERMIT CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD ATLANTIC BEACH, FL 32233 2 of 2Issued Date: 12/9/2020 PERMIT NUMBER RES20-0335 ISSUED: 12/9/2020 EXPIRES: 6/7/2021 RESIDENTIAL PERMIT CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD ATLANTIC BEACH, FL 32233 DESCRIPTION ACCOUNT QTY PAID PermitTRAK $222.94 RES20-0335 Address: 530 SELVA LAKES CIR APN: 172027 5594 $222.94 BUILDING $145.00 BUILDING PERMIT 455-0000-322-1000 0 $145.00 BUILDING PLAN REVIEW $72.50 BUILDING PLAN CHECK 455-0000-322-1001 0 $72.50 STATE SURCHARGES $5.44 STATE DBPR SURCHARGE 455-0000-208-0700 0 $3.26 STATE DCA SURCHARGE 455-0000-208-0600 0 $2.18 TOTAL FEES PAID BY RECEIPT: R14326 $222.94 Printed: Wednesday, December 9, 2020 10:58 AM Date Paid: Wednesday, December 09, 2020 Paid By: SUPER SIDERS AND TRIM, INC Pay Method: CREDIT CARD 402360452 1 of 1 Cashier: CG Cash Register Receipt City of Atlantic Beach Receipt Number R14326 i,,,,,,,;‘,' . Building Permit Application Updated 10/9/18 City of Atlantic Beach Building Department All INFORMATIONJ HIGHLIGHTED IN GRAY v 800 Seminole Road, Atlantic Beach, FL 32233 9,a IS REQUIRED.Phone: (904) 247--5826/Email: Building-Dept@coab.us 7 - 0/ z \ Job Address: Sao Se Iva LS e,lr: Permit Number: ESG,6 Legal Description `'A'ar!L z K..S 4I i.'A-2 1424 111 7 RE# 17 ZOI7 '5-5 Valuation of Work(Replacement Cost)$ /g A) Heated/Cooled SF Non-Heated/Cooled Class of Work: New Addition [Iteration Repair Move Demo ElPool Window/Door Use of existing/proposed structure(s): Commercial L Residential If an existing structure,is a fire sprinkler system installed?: Yes No Will tree(s)be removed in association with pr,op osed project? Yes(must submit separate Tree Removal Permit) No Describe in detail the type of work to be performed: KAP I4Ge bad see f?yK.S crc- '.£ )c , ACL) LIauSG w ra p i Hef e-./,'e c1'e ere, Al Ate/s Z Z1X) si .P-$4. Florida Product Approval# rL , /32 3 for multiple products use product approval form Property Owner Informatt own Name•, ,Cafr% fr I/ YLG 11 Address 5.---..O Se-//4 /4 « Cis/-, City AH , k /'SCta! State P Zip 3Z233 Phone "us,-Z/lp'-oze63 E-Mail <ij[ •.” • Cane+ A+ 4 Al.IV - Owner or Agent(If Aent, Power of Attorney or Agency Letter Required) Contractor Information Name of Company 'si f L1-S '/erS_`ru r qualifying Agent y`C.I t q 01I("yes Address 271 Fswot. Iii,tel 14- iV" . City 7/SL,,SC. State AZ/. Zip ?2 Z 7-5 Office Phone i' /' -I/-.. S Job Site Contact Number State Certification/Registration# //55-Z Y E-Mail 1 e f lit 1Q. .s -trer-jkkI-Akte l 7/%%%H.e e Architect Name&Phone# J Engineer's Name&Phone It Workers Compensation Insurer •sl•[A . OR Exempt Expiration Date Z / Application is hereby made to obtain a permit to do the work and installations as indicated. I certify that no wor or installation has commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulating construction in this jurisdiction. I understand that a separate permit must be secured for ELECTRICAL WORK, PLUMBING,SIGNS, WELLS,POOLS,FURNACES, BOILERS,HEATERS,TANKS,and AIR CONDITIONERS,etc. NOTICE: In addition to the requirements of this permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and there may be additional permits required from other governmental entities such as water management districts,state agencies,or federal agencies. OWNER'S AFFIDAVIT: I certify that all the foregoing information is accurate and that all work will be done in compliance with all applicable laws regulating construction and zoning. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS T YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LE D R AN ATTORNEY BEFORE RE DIN(- A--- G YQU OTICE OF COMMENCEMENT. Signature o caner or Agent) Signature of Contractor) F Signed and sworn to(or affirmed)before me this/2 day of Signed and sworn to(or affirmed)before me this /- day o N Nove er, L0Z0,,by &/r5 F. QShmt<I)LCCrihC', LO ,byJ)t?Qc(- Sh<c Mss ' / 7,1:E. r - 1 / 1, / ,f- L/ zA.a w c-.9 Signature of Notary) Signature of Nofary) u.i N df,5VI ELISE F•CASHAb1N Fess_ u,-oaPersonallyKnownI , i• MYCOMMISSION#GG 197871 Personally Known OR Ce Y v iu m Produced Identific• iiN,Y o.° EXPOS: 17,202y iiJulyoducedldentificati n o'••. Type of Identification:v Balled 7hru NOt iy Pul*c Under Type of Identification:f-f Q/• frl S 2'(-) `f 3? -7k'cot' 0 _t • -3u t17:-..i., --- RONALD I.OGAWA ASSOCIATES,INC. 5801 WARNER AVENUE,#376 HUNTINGTON BEACH,CA 92649 714-292-2602 714-908-1815 FAX PROJECT:RIO-2297-11 JAMES HARDIE BUILDING PRODUCTS,INC. 1-888-542-7343 info@jameshardie.com Table 6,Allowable Wind Speed(mph)for HardiePanel Siding(Analytical Method In ASCE 7-10 Chapter 30 C&C Part 1 and Part 3)8 2012 IBC,2010FBC 2012 IBC,2010 FBC Allowable,Ultimate Allowable,Nominal Design Wnd,Speed. Design Wnd,Speed. 56Vaal 3-second gust mph) (3-second gust mph) Applicable to methods A livable to methods specified in 12012 IBC, spooled in Exceptions I 2010 FBCI Section through 3 0112012 IBC, 1609.1.1.as determined b1 2010 FBC)Section 2012 IBC,2010 FBC]1609,1. 1. Figures 1609A,8,or C. Coefficients used in Table 6 calculations for V„, Wnd exposure category Wnd exposure category Siding K, Product Stud Building Allowable Wdth Fastener Fastener Frame T Design Product Thickness ( inches) Type Spacing Type Spacing Height B C D B C D Load inches) inches) (feel) PSF) Exp B Exp C Sep 0 K„ K, GC, GC„ 0-15 186 168 153 144 130 118 -49.7 0.7 0.85 103 6580 1 0.85 -1.4 0.18 20 186 164 149 144 127 , 116 -49.7 0.7 0.9 1.08 1 0.85 -1.4 0.18 25 186 160 147 144 124 114 ,49.7 0.7 0.94 1.12 1 0.85 -1.4 018 30 188 , 157 144 144 121 112 -49.7 0.7 0.98 1.16 1 0.85 -1.4 0.18 2X4 182 154 142 141 120 110 1 - 49.7 0.73 1.01 1.19 1 1 0.85 -1.4)0.18 HardiePanel® 5/16 48 6d 6 wood 16 40 178 152 141 138 118 109 -49.7 0.76 1.04 1.22 1 0.85 -14 0.18 common Hem-Fir 45 175 ' 150 1 139 136 117 108 -49.7 0.765 1.065 1.245 1 0.85 -14 0.18 5p 172 149 138 f 134 115 107 -49.7 0.81 1.09 1.27 1 0. 85 -1.4 0.18 5 170 147 137 132 114 108 1 .49.7 0.83 1.11 1.29 1 0. 85 -1.4 0 18 60 168 146 136 130 113 105 -49.7 0.85 1.13 1.31 1 0.85 -1.4 9,0.18 100 139 124 116 1013 96 90 -49.7 0.99 126 1.43 h>60 1 0 85 -1.8 0.18 0-15 233 212 192 181 164 149 -78.7 0.7 0.85 1.03 hs60 1 0.85 -1.4 0.18 20 233 206 188 181 159 , 148 -78.7 0.7 0.9 1.08 1 0.85 -1.4 0.16 25 233 201 185 181 156 143 ( -78.7 0.7 0.94 1.12 1 0.85 -1.4 0.18 30 233 197 181 181 153 140 -78.7 0.7 0.98 1.16 ' 1 0.85 -1.4 018 2X4 35 229 194 179 177 _ 151 139 1 -78.7 0.73 1.01 1.19 1 0.85 -1.4 0.18 HardiePanel 5/16 48 64 4 wood 16 40 224 192 _177 174 148 137 -78.7 0.76 1.04 1.22 1 0.85 -1.4 0.18 common Hem-Fir 45 220 189 ' 175 171 147 136 -78.7 0.785 1.065 1.245 1 0.85 -14 018 50 217 187 t 173 168 145 134 -78.7 0.81 1.09 1.27 1 0.85 -1.4 0.18 55 214 185 172 166 144 133 -78.7 - 0.83 1.11 1.29 1 0.85 -1.4 0.18 60 212 184 - 171 164 • 142 132 1 -78.7 085 1.13 1.31 1 0.85 -1.4 0.18 100 175 155 146 136 120 113 `-78.7 0.99 1.26 1.43 5>60 1 0.85' -1.8 0.18 0-15 147 134 121 _ 114 103 94 -31.3 0.7 0.85 1.03 hs i0 1 0.85 -1.4 0.18 1 20 147 130 ' 119 114 ' 101 92 -31.3 ' 0.7 0.9 , 1.08 1 0 85--1.4 0.18 25 147 127 116 ! 114 98 90 -31.3 0.7 0.94 1.12 1 0.85,-1.4 0. 18 30 I 147 124 ' 114 114 96 89 -313 , 0.7 0.98 1.16 1 0.85 -1.4 0.18 2X4 3 144 123 113 112 95 87 -31.3 0.73 1.01 1.19 1 0.85 -1.4 0.18 6d 6 wood 24 40 } 141 121 1 112 109 94 85 + -31.3 0.76 1.04 1.22 1 0.85 -1.41 0.18 HardiePanel® 5116 48 common Ham-Fir 45 139 119 110 108 92 / 86 r - 31 3 0.785 1.065 1.245 1 0.85' -1.4,0.18 50 137 118 ' 100 106 91 85 -313 0.81 1.09 1.27 1 0.85 -1.4 0.18 55 135 117 108 105 91 84 -31.3 0.83 1.11 1.29 1 085 -140.18 tea` l- rJ 60 134 116 108 103 90 83 -31.3 0.85 1.13 1.31 1'0.85 -1.4 0,18 100 111 98 92 86 76 71 -31.3 0.99 1.26 1.43 11>60 1 0 85 -1.8 0.16 0-15 182 _ 165 150 t 141 128 116 r -47.7 0.7 0.85 1.03 5060 1 0.85 -1.4 0.18 20 182 160 146 141 124 113 -47.7 0.7 0.9 1.08 1 0.85 -1.4 0.18 25 182 ' 157 144 141 121 111 -47.7 0.7 0.94 1.12 1 0.85 -1.4 0.18 30 _ 182 154 141 141 119 109 -47.7 0 7 0.98 1,16 1 0 85 -1.4 0.18 2X4 35 178 151 139 138 117 106 .47.7 0.73 1.01 1.19 1 0.85 -1.4 0.18 6d 4 wood 24 40 174 149 138 135 116 107 -47,7 0.76 1.04 1.22 1 0.85 -14 0.18 HerdfePaneIC0.1 5116 48 common Hem-Fir 45 172 147 136 133 114 106 .47.7 0.785 1.065 1.245 1 0.85 -1.4 0.18 50 169 146 135 131 113 105 -47.7 081 1.09 1.27 1 0.85 -1.4-0.18 55 167 144 134 129 112 104 -47.7 0.83 1.11 1.29 10.85 -1.4 0.18' 4 0. 18 60 165 143 133 128 111 103 -47.7 0.81.01/#44,,,,,...> 6 `t 0.85 -1.8 0.18 100 137 121 114 106 94 88 -47.7 0 P, r43' At 0• a ,. ,, \ *t.* iii 1.i 1 ,,\ S cc t' FLOQ` #. '' 1 r.0 C I C1 . ` , JamesHardie HardiePanel /%rZ Vertical Siding EFFECTIVE NOVEMBER 2012 INSTALLATION REQUIREMENTS - PRIMED&COLORPLUS- PRODUCTS Visit www.iaweshardie.com for the most recent version. SMOOTH • CEDARMILL© • SELECT SIERRA 8 • STUCCO MPORTANT:FAILURE TO INSTALL AND FINISH THIS PRODUCT IN ACCORDANCE WITH APPLICABLE BUILDING CODES AND JAMES HARDIE WRITTEN APPLICATION INSTRUCTIONS MAY LEAD TO PERSONAL INJURY,AFFECT SYSTEM PERFORMANCE,VIOLATE LOCAL BUILDING CODES, AND VOID THE PRODUCT ONLY WARRANTY.BEFORE INSTALLATION,CONFIRM THAT YOU ARE USING THE CORRECT HARDIEZONE INSTRUCTIONS. TO DETERMINE WHICH HARDIEZONE APPLIES TO YOUR LOCATION,VISIT WWW.HARDIEZONE.COM OR CALL 1-866-942-7343(866 9HARDIE) STORAGE & HANDLING: CUTTING INSTRUCTIONS Store flat and keep dry and OUTDOORS INDOORS covered prior to installation.Installing 1.Position cutting station so that wind will blow dust away from user 1.Cut only using score and snap,or shears(manual,electric or pneumatic). sidingwet or saturated mayresult in and others in waking area. 2.Position cutting station in well-ventilated area 2.use site of the folloveng methods: shrinkage at butt joints.Carry planks a Best: i.Score and snap on edge. Protect edges and corners ii.Shears(manual,electric or pneumatic) NEVER use a power saw indoors from breakage.James Hardie is not b.Better: i.Dust reducing circular saw equipped with a NEVER use a circular saw blade that does not carry the HardieBlade saw blade trademark g HardieBlade'saw blade and NEPA vacuum extraction -NEVER dry sweep—Use wet suppression or HEPA Vacuum responsible for damage caused c.Good: i.Dust reducing circular saw with a HardieBlade saw blade by improper storage and handling of only use for low to moderate cutting) the product.Important Note:For maximum protection(lowest respirable dust production),James Hardie recommends always using"Best"-level cutting methods where feasible. NIOSH-approved respirators can be used in conjunction with above cutting practices to further reduce dust exposures.Additional exposure information is available at www.jarneshardie.com to help you determine the most appropriate cutting method fa your fob requirements.t concern still exists about exposure levels or you do rat complywith the above practices,you should always consult a qualified industrial hygienist or contact James Hardie for further information. soosaios GENERAL REQUIREMENTS: HardiePanel"vertical siding can be installed over braced wood or steel studs spaced a maximum of 24"o.c.See general fastening requirements.Irregularities in framing and sheathing can mirror through the finished application. Information on installing James Hardie products over foam can be located in JH Tech Bulletin 19 at www.jamehardie.com A water-resistive barrier is required in accordance with local building code requirements.The water-resistive barrier must be appropriately installed with penetration and junction flashing in accordance with local building code requirements,James Hardie will assume no responsibility for water infiltration.James Hardie does manufacture HardieWrap'"Weather Barrier,a non-woven non-perforated housewrapt,which complies with building code requirements. When installing James Hardie products all clearance details in figs.3,5,6,7, 8, 9,10 8,11 must be followed. Adjacent finished grade must slope away from the building in accordance with local building codes-typically a minimum of 6"in the first 10'. Do not install James Hardie products,such that they may remain in contact with standing water. HardiePanel vertical siding may be installed on vertical wall applications only. DO NOT use HardiePanel vertical siding in Fascia or Trim applications. DO NOT use stain on James Hardie"products. For larger projects,including commercial and multi-family projects,where the span of the wall is significant in length,the designer and/or architect should take into consideration the coefficient of thermal expansion and moisture movement of the product in their design.These values can be found in the Technical Bulletin Expansion Characteristics of James Hardie®Siding Products"at www.JamesHardie.com. INSTALLATION: Fastener Requirements Joint Treatment Position fasteners 3/8"from panel edges and no closer than 2"away from •Vertical Joints Install panels in moderate contact(fig.1),alternatively joints corners.Do not nail into corners.HardiePanel Vertical Siding Installation may also be covered with battens,PVC or metal jointers or caulked Framing must be provided at horizontal and vertical edges for nailing.Not applicable to ColorPlus®Finish)(fig.2). HardiePanel vertical siding must be joined on stud. Horizontal Joints-Provide Z-flashing at all horizontal joints(fig.3). Double stud may be required to maintain minimum edge Figure 2 nailing distances. water-resistive barrier water-resistive barrier Figure 1 5t d zxastud ,—t Figure 3 2xaswd water-resistive'!water-resistive Ovate resistive barrier burnerj' i.__ Barreri upper panel upper panel sheathing `" J HardiePanel jJ) r'• Do not 114"gap Do not 1/4°gap r r vertical siding Caulk Caulk j keep nails I Batten Joint H"Joint f f 3l8"min. S r F-Z-flashing f 1 ' 2-flashing} from panel -_ edges water-resistive barrierILIVr I decorative 4—band board t 2 x 4 stud lower lower plate ,:s,------ r' panel I w panel t °I°c, Figure 4 keep fasteners 2" leave appropriate gap between Recomnendaho®When away from corners moderate contact r_ panels,then caulk* nstalling Sierra 8,provide Not applicable to ColorPlus`Finish) Caulk Joint II 1 ai double stud at panel Apply caulk in accordance with caulk manufacture's written application instructions. pints to avoid nailing 8 through grooves. For additional information on HardieWrapr""Weather Barrier,consult James Hardie at 1-866-4Hardie or www.hardiewrap.com WARNING:AVOID BREATHING SILICA DUST James Hardie'products contain respirable crystalline silica,which is known to the State of California to cause cancer and is considered by IARC and NIOSH to be a cause of cancer from some occupational sources.Breathing excessive amounts of respirable silica dust can also cause a disabling and potentially fatal lung disease called silicosis,and has been linked with other diseases.Some studies suggest smoking may increase these risks.During installation or handling:(1work in outdoor areas with ample ventilation;(2)use fiber cement shears for cutting or,where not feasible.use a HardieBlade"saw blade and dust-reducing circular saw attached to a HEPA vacuum; 3 warn others in the immediate area;(4)wear a properly-fitted,NIOSH-approved dust mask or respirator(e.g.N-95)in accordance with applicable government regulations and manufacturer instructions to urther limit respirable silica exposures. During dean-up,use HEPA vacuums or wet cleanup methods-never dry sweep. For further information,refer to our installation instructions and Material Safety Data Sheet available at www.tameshardie.com or by calling 1-800-9HARDIE(1-800-942-7343). FAILURE TO ADHERE TO OUR WARNINGS,MSOS,AND INSTALLATION INSTRUCTIONS MAY LEAD TO SERIOUS PERSONAL INJURY OR DEATH. sNwas HS1237-P1/3 11/12 1-17—E. CLEARANCES Install siding and trim products in Maintain a minimum 2" Maintain a minimum 2"clearance At the juncture of the roof and vertical Maintain a 1/4" compliance with local building code clearance between between James Hardie products surfaces,flashing and counterflashing clearance between requirements for clearance between James Hardie® and decking material.shall be installed per the roofing the bottom of James q manufacturer's instructions.Provide a Hardie products and the bottom edge of the siding and products and paths, Figure 7 minimum 2"clearance between the horizontal flashing. the adjacent finished grade.steps and driveways. - III roofing and the bottom edge of the Do not caulk gap. siding water siding and trim. Refer to fig.3 on Figure 5 stud Figure 6 i. resistive Figure 8 page 1. siding barrier Qr w deck material 2min. 2" min. II I plabottte plateII joist_ I ledger -_ lag concrete F min. I foundation Do not bridge floors with HardiePanel®siding.Horizontal KICKOUT FLASHING joints should always be created between floors(fig.10). Because of the volume of water that can pour down a sloped Water- roof,one of the most critical flashing details occurs where aResistive Maintain a minimum 1"gap Barrier H ' Framing roof intersects a sidewall. The roof must be flashed with step between gutter end caps and Figure 10 flashing. Where the roof terminates,install a kickout to deflect siding&trim. Figure 9HorizontalFFlooringwateraway from the siding.tt is best to install a self-adhering9mmmembraneonthewallbeforethesubfasciaandtrimboards 7 j are nailed in place,and then come back to install the kickout. 1 -------- Figure 11,Kickout Flashing To prevent water from siding dumping behind the siding and the end of the roof il Sheathing intersection,install a"kickout"as required by IRC code R905.2.8.3:"...flashing shall be a min.of 4"high and 4" fascia HardiePanele wide."James Hardie recommends the kickout be angled 11 1 between 100°-110°to maximize water deflection gutter and end cap Figure 1 / step lashing, ,.\• 't. Self-adhering<s membrane % 47......„,,..GENERAL FASTENING REQUIREMENTS adhel Jn Fasteners must be corrosion resistant,galvanized,or stainless steel.Electro-galvanized are a"es memb ane Klckout acceptable but may exhibit premature corrosion.James Hardie recommends the use of quality, flashing hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of Drip edge fasteners. Stainless steel fasteners are recommended when installing James Hardie products near the ocean,large bodies of water,or in very humid climates. HW ew,ap I Consult applicable product evaluation or listing for correct fastener type and placement to achieve specific design wind loads. NOTE:Published wind loads may not be applicable to all areas where Local Building Codes have specific jurisdiction.Consult James Hardie Technical Services if you are unsure of applicable PNEUMATIC FASTENINGcompliancedocumentation. Drive fasteners perpendicular to siding and framing.James Hardie products can be hand nailed or fastened with a Fastener heads should fit snug against siding(no air space).(fig.A) pneumatic tool.Pneumatic fastening is highly recommended. Do not over-drive nail heads or drive nails at an angle. Set air pressure so that the fastener is driven snug with the If nail is countersunk,fill nail hole and add a nail.(fig.B) surface of the siding.A flush mount attachment on the For wood framing,under driven nails should be hit flush to the plank with a hammer(for steel pneumatic tool is recommended. This will help control the framing,remove and replace nail). depth the nail is driven.If setting the nail depth proves difficult, NOTE:Whenever a structural member is present,HardiePlank should be fastened with even choose a setting that under drives the nail.(Drive under driven spacing to the structural member.The tables allowing direct to OSB orplywood should only be nails snug with a smooth faced hammer Does not apply for used when traditional framing is not available. Do not use aluminum fasteners,staples,or clipped head nails. installation to steel framing). Snug Flush Countersunk, 1v 4z, _\ fill&add nail Al u do not under DO NOT Figure A Figure B drive nails STAPLE HS1237-P2/3 11/12 IiZ. CAULKING For best results use an Elastomeric Joint Sealant complying with ASTM C920 Grade NS,Class 25 or higher or a Latex Joint Sealant complying with ASTM C834. Caulking/Sealant must be applied in accordance with the caulking/sealant manufacturer's written instructions.Note:OSI Quad as well as some other caulking manufacturers do not allow tooling. DO NOT caulk nail heads when using ColorPlus products,refer to the ColorPlus touch-up section CUT EDGE TREATMENT PAINTING Caulk,paint or prime all field cut edges. DO NOT use stain on James Hardie®products.James Hardie products must be painted within 180 days for primed James Hardie touch-up kits are required product and 90 days for unprimed.100%acrylic topcoats are recommended.Do not paint when wet.For to touch-up ColorPlus products. application rates refer to paint manufacturers specifications.Back-rolling is recommended if the siding is sprayed. COLORPLUS''TECHNOLOGY CAULKING,TOUCH-UP& LAMINATE Care should be taken when handling and cutting James Hardie ColorPlus products.At the job-site use a soft cloth to gently wipe any residue or construction dust left on the product Touch up nicks,scrapes and nail heads using the ColorPlus®Technology touch-up applicator.Touch-up should be used sparingly.If large areas require touch-up,replace the damaged area with new HardiePanel°siding with ColorPlus Technology. Laminate sheet must be removed immediately after installation of each course. Terminate non-factory cut edges into trim where possible,and caulk.Color matched caulks are available from your ColorPlus°product dealer. Treat all other non-factory cut edges using the ColorPlus Technology edge coaters,available from your ColorPlus product dealer. Note:James Hardie does not warrant the usage of third party touch-up or paints used as touch-up on James Hardie ColorPlus products. Problems with appearance or performance arising from use of third party touch-up paints or paints used as touch-up that are not James Hardie touch-up,will not be covered under the James Hardie ColorPlus Limited Finish Warranty. PAINTING JAMES HARDIE®SIDING AND TRIM PRODUCTS WITH COLORPLUS"TECHNOLOGY When repainting ColorPlus products,James Hardie recommends the following regarding surface preparation and topcoat application: Ensure the surface is clean,dry,and free of any dust,dirt,or mildew Repriming is normally not necessary 100%acrylic topcoats are recommended DO NOT use stain or oil/alkyd base paints on James Hardie°products Apply finish coat in accordance with paint manufacturers written instructions regarding coverage,application methods,and application temperature RECOGNITION:In accordance with ICC-ES Legacy Report NER-405,HardiePanel"vertical siding is recognized as a suitable alternate to that specified in:the BOCA National Building Code/1999,the 1997 Standard Building Code,the 1997 Uniform Building Code,the 1998 International One-and Two-Family Dwelling Code,the 2003 International Building Code,and the 2003 International Residential Code for One-and Two-Family Dwellings.HardiePanel vertical siding is also recognized for application in the following:City of Los Angeles Research Report No.24862,State of Florida listing FL#889,Dade County,Florida NOA No.02-0729.02,U.S. Dept.of HUD Materials Release 1263c,Texas Department of Insurance Product Evaluation EC-23,City of New York MEA 223-93-M,and California DSA PA-019.These documents should also be consulted for additional information concerning the suitability of this product for specific applications. 2012 James Handle Building Products. All rights reserved. TM,SM,and 0 denote trademarks or registered trademarks of Additional Installation Information, James Hardie Building Products. 91 is a registered Warranties,and Warnings are available at ® JamesHardie trademark of James Hardie Building Products. www.jameshardie.com HS1237-P3/3 11/12 NOTICE OF COMMENCEMENT State of Tax Folio No. County of 6lot,VA. I To Whom It May Concern: The undersigned hereby informs you that improvements will be made to certain real property, and in accordance with Section 713 of the Florida Statutes,the following information is stated in this NOTICE OF COMMENCEMENT. Legal Description of property being improved: 1/3 -11 7-25 —21 t 5ELVM9-- L Yi 1 Upt- '-- 2 Ge,i•-• .? Address of property being improved: '0 SeJvet_ LA Pee G I.^. General description of improvements: $ ((d//(`'` Q lit' 5-1;01(0-7` nett) sl r`e1'/() 0eC , /4 ', .)L_ l Owner: it(te T i! f J/k Address: ir/ S / 1/"'. Owner's interest in site of the improvement: Fee Simple Titleholder(if other than owner): Name: 4l / Contractor: 51,[1!1` S' 'fr es' 4µ,/ fl ' 7 rl Z Address: 27O 2 Ai4.),'l // 4—,— 21,-• Telephone No.: Dy'4/ZD55 Fax No: Surety(if any) Address: Amount of Bond$ Telephone No: Fax No: Name and address of any person making a loan for the construction of the improvements Name: Address: Phone No: Fax No: Name of person within the State of Florida,other than himself,designated by owner upon whom notices or other documents may be served: Name: Address: Telephone No: Fax No: In addition to himself, owner designates the following person to receive a copy of the Lienor's Notice as provided in Section 713.06(2)(b),Florida Statues. (Fill in at Owner's option) Name: Address: Telephone No: Fax No: Expiration date of Notice of Commencement(the expiration date is one(1)year from the date of recording unless a different date is specified): THIS SPACE FOR RECORDER'S USE ONLY OWNER Signed: g/n--V- ' Date: ! / 2 - .)-03•0 Before m is i(9.4i_ day of 1;L.'L'-e/ri-{oe( in the County of Duval,State Doc#2020269665,OR BK 19479 Page 998,Of Florida,has personally appeared -"ici i-,",; t t , Number Pages: 1 Notary Public at Large,State of Flori r l 1 Recorded 12/04/2020 03:01 PM, RONNIE FUSSELL CLERK CIRCUIT COURT DUVAL My commission expires I: COUNTY Personally Known: y off or RECORDING $10.00 Produced Identification: EXPIRES.July 17,2022