Loading...
333 Plaza ACC18-0011 ZRC 02.21.2018 CITY OF ATLANTIC BEACH 800 SEMINOLE ROAD ATLANTIC BEACH, FL 32233 (904) 247-5800 ZONING REVIEW COMMENTS Date: 2/21/2018 Permit #: ACC18-0011 Site Address: 333 PLAZA Review Status: DENIED RE#: 169999 0000 Applicant: DEAN RUSSELL CUSTOM HOMES Property Owner: William Alfaro Email: kim@deanrussellconstruction.com Email: ericalfaro00@gmail.com Phone: 9042413334 9043385262 Phone: 9042397638 THIS REVIEW IS ONE OF MULTIPLE DEPARTMENT REVIEWS. Revisions may not be submitted until ALL departments have completed their respective reviews. Revisions submitted MUST respond to EACH department review. Submittals that respond to only one or a few correction items will not be accepted. Correction Comments: 1. Survey: Section 24-67(c) requires a certified survey. Please provide a certified survey. 2. Setbacks: Please provide the setback measurements from both side property lines as well as from the rear property line to all proposed structures. 3. Height: Section 24-17 requires height to be measured from grade to the highest point of a buildings roof structure or parapet and any attachments thereto, exclusive of chimneys. Please show the overall height from grade on plans. 4. Accessory Structures: Detached garages that exceed 600 square feet in lot area must comply with the applicable setback requirements for the principal structure, meaning the detached garage would have to be 20 feet from the rear property line and a combined 15 feet from the side property lines. Please revise accordingly. Brian Broedell, bbroedell@coab.us Resubmittal Notes: All revisions and changes shall clearly stand out from the rest of the drawing on the sheet as a revision by way of completely encircling the change with “clouding”. The revision shall also be identified as to the sequence of revision by indicating a triangle with the revision sequence number within it and located adjacent to the cloud. The revision date and revision sequence number shall also be indicated in a conspicuous location in the title block for each sheet on which a revision for that sequence occurs. For projects still in the initial review stage and permit pending, all sheets with revisions shall be inserted into each set of drawings. The original sheets must be clearly marked “VOID” but are to be left within the set of drawings. Complete new sets of drawings will not be accepted. ADDITIONAL ITEMS MAY BE REQUIRED DEPENDING UPON NEW INFORMATION AND CLARITY OF FINAL PLANS SUBMITTED FOR REVIEW.