1090 Main St RES21-0177 Siding, Win, Door '�,p,. RESIDENTIAL PERMIT PERMIT NUMBER
J. �i t
CITY OF ATLANTIC BEACH - 17
V~ 800 SEMINOLE ROAD ISSUED:RES210
6/15/27 021
". t11) ATLANTIC BEACH. FL 32233 EXPIRES: 12/12/2021
MUST CALL INSPECTION PHONE LINE (904) 247-5814 BY 4 PM FOR NEXT DAY INSPECTION.
ALL WORK MUST CONFORM TO THE CURRENT 6TH EDITION (2017) OF THE FLORIDA BUILDING
CODE, NEC, IPMC, AND CITY OF ATLANTIC BEACH CODE OF ORDINANCES .
ALL CONDITIONS OF PERMIT APPLY, PLEASE READ CAREFULLY.
NOTICE: In addition to the requirements of this permit,there may be additional restrictions applicable to this property
that may be found in the public records of this county, and there may be additional permits required from other
governmental entities such as water management districts, state agencies, or federal agencies.
JOB ADDRESS: 1 PERMIT TYPE: 1 DESCRIPTION: VALUE OF WORK:
RESIDENTIAL ALTERATION HARDIE PLANK SIDING,
1090 MAIN ST WINDOWS AND SLIDING $35000.00
RESIDENTIAL
GLASS DOOR
TYPE OF REAL ESTATE ZONING: BUILDING USE SUBDIVISION:
CONSTRUCTION: NUMBER: GROUP:
170995 0550 ATLANTIC BEACH SEC H
COMPANY: ADDRESS: CITY: STATE: ZIP:
MISSING
OWNER: ADDRESS: CITY: STATE: ZIP:
HAYNIE JEFFREY 1090 MAIN ST ATLANTIC BEACH FL 32233-2624
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT II\
YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT
MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU
INTEND TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YOUR NOTICE OF COMMENCEMENT.
LIST OF CONDITIONS
Roll off container company must be on City approved list . Container cannot be placed on City right-of-way.
DESCRIPTION ACCOUNT QUANTITY PAID AMOUNT
BLDG 2ND PLAN REVIEW FEE 455-0000-322-1006 0 $50.00
BUILDING PERMIT 455-0000-322-1000 0 $230.00
BUILDING PLAN CHECK 455-0000-322-1001 0 $115.00
STATE DBPR SURCHARGE 455-0000-208-0700 0 $5.93
STATE DCA SURCHARGE 455-0000-208-0600 0 $3.95
Issued Date:6/15/2021 1 of 2
RECEIVED
OFFICE COPY By Toni Gindlesperger at 9:11 am,Jun 11,2021
Revision Request/Correction to Comments **ALL INFORMATION
HIGHLIGHTED IN
City of Atlantic Beach Building Department GRAY IS REQUIRED.
-.);1/
/' 800 Seminole Rd, Atlantic Beach, FL 32233
Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#: Z I — I-7
0 Revision to Issued Permit OR Fl Corrections to Comments Date: �.(ct( Z I
Project Address: 10 ct( 1-Av. S
Contractor/Contact Name: 1 xrf L niO-er•T'y tmiA r l
Contact Phone: `\u-(- bEU - 301 Email: 31k-kvoiv c C �U �• c����
Description of Proposed Revision/Corrections:
) 1, Cv'�l `1(,ht-- 1\ f✓t'IK c'��t r.t,\ ()zevt^ T atplf?r(1c-vf
�t(vlt k4.1 � tl;v� a j �' et 'f G,vvZie • ✓'1L-ivlW V IcA " 4f qv,I bel\fy
\-( i c'e affirm the revision/correction to comments is inclusive of the proposed changes.
(printeiJ name)
., proposed revision/corrections add additional square footage to original submittal?
iLiNo E Yes (additional s.f.to be added:
• ill roposed revision/corrections add additional increase in building value to original submittal?
No l*Yes (additional increase in building value:$ )(Contractor must sign if increase in valuation)
*Signature of Contractor/Agent:
(Office Use Only)
Approved Denied ❑ Not Applicable to Department Permit Fee Due$
50.00
Revision/Plan Review Comments
Department Review Required:
Building
Planning&Zoning REVIEWED
Tree Administrator
Public Works By Mike Jones at 10:37 am, Jun 14, 2021
Public Utilities
Public Safety Date
Fire Services Updated 10/17/18
JOB COPY RECEIVED
By Toni Gindlesperger at 9:11 am,Jun 11,2021
Owner Builder Affidavit ALL IIVYIJKIVIHIILJIV
HIGHLIGHTED IN
n
City of Atlantic Beach Building Department GRAY IS REQUIRED.
800 Seminole Rd, Atlantic Beach, FL 32233
Phone: (904) 247-5826 Email: Building-Dept@coab.us PERMIT#: S L1- 11
I. FLORIDA STATUTES;CHAPTER 489, FLORIDA STATUTES, PART 1"CONSTRUCTION CONTRACTING" REQUIRES
OWNER/BUILDER TO ACKNOWLEDGE THE LAW:
DISCLOSURE STATEMENT FOR SECTION 489.103(7), FLORIDA STATUTES:
STATE LAW REQUIRES CONSTRUCTION TO BE DONE BY LICENSED CONTRACTORS. YOU HAVE APPLIED
FOR A PERMIT UNDER AN EXEMPTION TO THAT LAW. THE EXEMPTION ALLOWS YOU,AS THE OWNER
OF YOUR PROPERTY,TO ACT AS YOUR OWN CONTRACTOR EVEN THOUGH YOU DO NOT HAVE A
LICENSE.
YOU MUST SUPERVISE THE CONSTRUCTION YOURSELF.
YOU MAY BUILD OR IMPROVE A ONE OR TWO FAMILY RESIDENCE OR A FARM OUTBUILDING. YOU MAY
ALSO BUILD OR IMPROVE A COMMERCIAL BUILDING AT A COST OF$25,000.00 OR LESS.
THE BUILDING MUST BE FOR YOUR USE AND OCCUPANCY. IT MAY NOT BE BUILT FOR SALE OR LEASE.
IF YOU SELL OR LEASE A BUILDING YOU HAVE BUILT YOURSELF WITHIN ONE YEAR AFTER THE
CONSTRUCTION IS COMPLETE,THE LAW WILL PRESUME THAT YOU BUILT IT FOR SALE OR LEASE,WHICH
IS IN VIOLATION OF THIS EXEMPTION.
YOU MAY NOT HIRE AN UNLICENSED PERSON AS YOUR CONTRACTOR.YOUR CONSTRUCTION MUST
BE DONE ACCORDING TO THE BUILDING CODES AND ZONING REGULATIONS.
IT IS YOUR RESPONSIBILITY TO MAKE SURE THAT PEOPLE EMPLOYED BY YOU HAVE LICENSES
REQUIRED BY STATE LAW AND BY COUNTY OR MUNICIPAL LICENSING ORDINANCES.
II. INJURY LIABILITY;SINCE OWNERS MAY BE LIABLE FOR INJURIES TO WORKERS THEY HIRE,THE BUILDING DEPARTMENT
SUGGESTS WORKER'S COMPENSATION INSURANCE BE PURCHASED. .
III. IRS WITHHOLDING;OWNERS HIRING WORKERS BECOME EMPLOYERS AND SHOULD ALSO OBSERVE IRS WITHHOLDING
TAX AND/OR FORM 1099 REQUIREMENTS ON THE WORKERS THEY EMPLOY ON THEIR IMPROVEMENT TRADES.
IV. PENALTY;UNLICENSED CONTRACTORS CANNOT BE EMPLOYED UNDER ANY CIRCUMSTANCES.OWNERS BEING SUBJECT
TO$5,000 PENALTY UNDER FLORIDA STATUTE NO.455-228(1). AN "OCCUPATIONAL LICENSE" IS NOT ADEQUATE. THE
OWNER SHOULD PHYSICALLY SEE THE COUNTY"CERTIFICATE OF COMPETENCY" OR THE FLORIDA"CONTRACTORS
CERTIFICATE"TO ASCERTAIN IF A PERSON IS A LICENSED CONTRACTOR. CONTACT THE BUILDING DEPARTMENT(904-
247-5826 OR BUILDING-DEPT@COAB.US ) IF IN DOUBT.
V. ACKNOWLEDGEMENT; I HEREBY ACKNOWLEDGE THAT I HAVE READ THE ABOVE DISCLOSURE STATEMENT AND THAT I
COMPLY WITH ALL THE REQUIREMENTS FOR THE ISSUANCE OF AN OWNER-BUILDER PERMIT.
Job Address: 10cO sANeitt
Owner Name: T irc..1 Nj,,-t Irl- Phone Number: - b60—1636'1
Mailing Address: tOi;v City: J-tVIui G 3tia-�, State: I=L- Zip: 3 2 Z 3 3
•
Notarized Signature of Owner
The foregoing instrument was acknowledged before me this 61 ;"=day of T5—ti'.- , 20 L( ,in the State of Florida, County
of n,, ,,1
�►!".. ,.. RIKKI R.SOiJTHWORTH
• "' Signature of Notary Public
_.: !a MY COMMISSION#HH 011936
% . �. EXPIRES:June 18,2024
FN.P• Bonded mUNotary Pubic (r7j ( Personally Known OR [ ] Produced Identification
Type of Identification:
REVIEWED Updated 10/24/18
By Mike Jones at 10:39 am, Jun 14, 2021
JOB COPY REVIEWED FOR CODE COMPLAINCE 6.14.2021
•" '`psi . Building Permit Application
'4 City of Atlantic Beach Building Department REVIEWED
800 Seminole Road, Atlantic Beach, FL 32233 By Mike Jones at 10:42 am, Jun 14, 2021
Phone: (904) 247-5826 Email: Building-Dept@coao.us
Job Address: \ucko f'4t\l\.,\ SA ok.4.1- Permit Number: RES21-01 77
Legal Description IC} 2, ,\s A- I% , S i 4t(,‘., 1{ RE# l-(Gti`u--CSSG
Valuation of Work(Replacement Cost)$ 3C, wo Heated/Cooled SF Non-Heated/Cooled
• Class of Work: ONew ❑Addition ❑Alteration f IRepair ❑Move ❑Demo OPool IX.Window/Door
• Use of existing/proposed structure(s): ❑Commercial WResidential
• If an existing structure,is a fire sprinkler system installed?: ❑Yes No
• Will tree(s)be removed in association with proposed project? ❑Yes(must submit separate Tree Removal Permit) &No
Describe in detail the type of work to be performed: (L0(ctu: I I-t\ S,3, w:; t-\AJ iia Pwhk IA( S 1
61,4 et? a(f, Alt W;TNAOWS w,\A it C,.,) ;�',(tc,ct �)t't5i (awl s\tc11\ cj ' Ci''r) /
Florida Product Approval# for multiple products use product approval form
Property Owner Information •
Name Si•Kr C---t k'{ccy•til.. Address k()'AO Nlat\-1 S(r�f
City ktt•.nk,. Rt<'ck State FI, Zip 37133 Phone Qt'( - `,-GC' r 36c'1
E-Mail 3cJInu „k_c'-- '.(0-0O.(_d.,.-\
Owner or Agent W Agent, Power of Attorney or Agency Letter Required)
Co .ctor Information
Name o �� vim c C/101-5 l Qualifying Agent --A t4..' /7 — . ` _..1
Address '9 '�f 4 i • _ City Tgx eci4 3S S . - IP _f►--d
Office Phone • ,r45�� Job Site Contact N - _......m ___ 5 • `-
State Certification/Registration# /2.7m _,.9_.4 OP 1,_.• •- CO di
Arc • -
En, eer's Name&Phone#
•rkers Compensation Insurer OR Exempt t* txpiration Date
Application is hereby made to obtain a permit to do the work and installations as indicated.I certify that no work or installation has
commenced prior to the issuance of a permit and that all work will be performed to meet the standards of all the laws regulating
construction in this jurisdiction.I understand that a separate permit must be secured for ELECTRICAL WORK,PLUMBING,SIGNS,
WELLS,POOLS,FURNACES,BOILERS,HEATERS,TANKS,and AIR CONDITIONERS,etc. NOTICE:In addition to the requirements of this
permit,there may be additional restrictions applicable to this property that may be found in the public records of this county,and
there may be additional permits required from other governmental entities such as water management districts,state agencies,or
federal agencies.
OWNER'S AFFIDAVIT:I certify that all the foregoing information is accurate and that all work will be done in compliance with all
applicable laws regulating construction and zoning.
WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY
RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND
TO OBTAIN FINANCING, CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE
RECORDING YO NOTICE OF COMMENCEMENT. s
(Si ture of Owner or Agent) (Signature ofcontract r)
Signed and sworn to(or affirmed)before me this 2" day of Signed and sworn to(or affirmed)before me this (sr day of
J---.1:1 e. , '2YZt by j'1 ee (;, •_k ,,,'t ._" t jJ L1 ,by !Q j 'A 4 - IJ,rti,lc
(Signature of Notary) (Signature of Notary)
: ••. RIKK1 R.SOUTHWORTH
(A Personally Known OR �!� MY COMMISSION#HH 011936 •.,Q Personally Known OR y* i. Notary Public State of Florida
[ J Produced Identification ",'!'�>7. EXPIRES:June 18.2024 ]Produced Identification f Jeffrey G Haynie
Type of Identification: ''' ':fl?''' Bonded Thru Notary Pubic Uudemiera 'you of Identification: S My Commission GG 273546
YP 4}«^ Expres 11101!2022
JOB COPY REVIEWED
>` >7 By Mike Jones at 10:43 am, Jun 14, 2021
,r PRODUCT APPROVAL INFORMATION SHEET FOR THE CITY OF ATLANTIC BEACH, FLORIDA (*REQUIRED)
•
*Project Address: j0`t0 NIK' Sty'0 Permit#: RES21-0177
*Owner/Project Name: 5
As required by Florida Statute 553.842 and Florida Administrative Code Rule 9B-72, please provide the information and product approval number(s)for
the building components listed below as applicable to the building construction project for the permit number listed above. You should contact your
product supplier if you do not know the product approval number for any of the applicable listed products. Information regarding statewide product
approval may he obtained at:www.floridabuilding.org.
Category/Subcategory Manufacturer Product Description Limitation of Use State# Local#
A.EXTERIOR DOORS
1.Swinging
tt—t`t
2.Sliding tAk W tiko; i;Ut C tka., V... s la Mt t(O;r 2- 6 C\ Z.S-
3.
3.Sectional
4.Garage Roll-Up
5.Automatic
6.Other
B.WINDOWS
1.Single hung M` vj'vtrkuws "(S 5 t3-7
2. Horizontal slider Wass.") 4,,4 bis 2 3
3.Casement
4. Double hung
5. Fixed
6.Awning
7. Pass-through
8. Projected
9. Mullion
10.Wind breaker
11. Dual action
12.Other IIn
Ml tJ'��Ws rhk V��C �� 2.�7 5„13v.;S f 21 � 3 1
Page 1 of 4 Updated 10/17/18
JOB COPY
Category/Subcategory Manufacturer Product Description Limitation of Use State it Local U
C.PANEL WALL
1.Siding j-a rc t}r;rcl B�;td,k Prslv.1 \+,;a d'lc LUp 541 13 I cI Z, 2
2.Soffits
3. EIFS
4.Storefronts
5.Curtain walls
6.Wall louvers
7.Glass block
8. Membrane
9.Greenhouse
10.Synthetic stucco
11. Other
D. ROOFING PRODUCTS
1.Asphalt shingles
2. Underlayments
3. Roofing fasteners
4. Nonstructural metal
roof
5. Built-up roofing
6. Modified bitumen
7.Single ply roofing
8. Roofing tiles
9. Roofing insulation
10.Waterproofing
11.Wood shingles/shakes
12. Roofing slate
13. Liquid applied roofing
14.Cement-adhesive
coats
15. Roof tile adhesive
16.Spray applied
polyurethane roof
17. Other
Page 2 of 4 Updated 10/17/18
JOB COPY
In addition to completing the above list of manufacturers, product description and State approval number for the products used on this project, the
Contractor shall maintain on the job site and available to the Inspector, a legible copy of each manufacturer's printed specifications and installation
instructions along with this Product Approval Sheet.
I certify that this product approval list is true and correct to the best of my knowledge. I further certify that use of different components other than the
ones listed in this document must be approved by the Building Official.
*Contractor Name(Print Name): Ep kpb (Z•,u fC'f{QLs*Contractor Signature: 6.00eW.e.(/?.e/(je„,
*Company Name: �� l H/ 6(Q CS ,
*Mailing Address: qQ c a761.3-7- 7t
*City: TAS c *State: *Zip Code: 3 2 7,�
*Telephone Number: 90 `i —2..`t" ?(::7D a *E-mail Address: pAlx.iAy Air C te3 .-/-L-,scju 7 oftt�r
Cell Phone Number: ?c7 t H 'f ` Ocf-?( Fax Number: o - 2_-(=iF`
Page 4 of 4 Updated 10/17/18
JOB COPY REVIEWED
: By Mike Jones at 10:45 am, Jun 14, 2021
`V
kfj7j4 , RES21-0177
't*1111111/441HardiePlank- Lap Siding
Illi
EFFECTIVE DECEMBER 2019
IMPORTANT:FAILURE TO FOLLOW JAMES HARDIE WRITTEN INSTALLATION INSTRUCTIONS AND COMPLY WITH APPLICABLE BUILDING CODES MAY VIOLATE LOCAL LAWS,AFFECT
BUILDING ENVELOPE PERFORMANCE AND MAY AFFECT WARRANTY COVERAGE.FAILURE TO COMPLY WITH ALL HEALTH AND SAFETY REGULATIONS WHEN CUTTING AND INSTALLING
THIS PRODUCT MAY RESULT IN PERSONAL INJURY.BEFORE INSTALLATION,CONFIRM YOU ARE USING THE CORRECT HARDIEZONE°PRODUCT INSTRUCTIONS BY VISITING
HARDIEZONE.COM OR CALL 1-866-942-7343(866-9-HARDIE)
LL CUTTING INSTRUCTIONS
STORAGE& HANDLING: OUTDOORS INDOORS
1.Position cutting station so that airflow blows dust away from toe 00 NOT grind or cut with a power saw indoors.Cut using shears(manual.pneumatic or
Store flat and keep dry and covered prior to user and others near the cutting area. e:ectric)or the score and snap method not recommended for products thicker than 7/16 al
installation Installing siding wet or saturated may 2.Cut using one of the following methods:
result in shrinkage at butt joints.Carry planks on a.Best: Circular saw equipped wits a Hardie8lade`saw blade
and attached vacuum dust collection system.Shears DO NOT dry sweep dust:use wet dust suppression or vacuum to collect dust
edge. Protect edges and corners from breakage. (mannal.pneumatic or electric)may also be used.not - For maximum dust reduction,James Hartle recommends using the'Best"cutting
7
than /16 in.
James Hardie is not responsible for damage caused recommended for products thickerpractices.Always follow N¢equipment manufacturer's instructions tor proper operation.
by improper storage and b Bever: Circular saw equpped with a dust collection feature For bey.performance wines cutting with a circular saw.James Hardie recommends
,i,_ le.g.Roan°saw)and a HareieBlatle saw blade using Hardie:a le'saw o:ades.
handling of the ,--•-".--.......—'..',----
c.Good: Circular saw equipped with a HardieStade saw Wade.
product �.� - Go to jameshardiepros.com for additional cutting ane dust control recommendations
IMPORTANT:The Occupational Safely and Health Administration(OSHA)regulates workplace exposure to silica dust. For construction sites.OSHA has deemed
Nat cutting fiber cement with a circular saw having a blade diameter less than 8 inches and connected to a commercially available dust collection system per
manufacturers instructions results in exposures below the OSHA Permissible Exposure Limit(PEL)for respirable al's/aline silica.without the need for additional
respiratory protection.
If you are unsure about how to comply with OSHA silica dust regulations,consult a qualified Industrial hygienist or safety professional,or contact your James
Hardie technical sales representative for assistance.Jaynes Hardie makes no representation or warranty that adopting a particular cutting practice will assure
your compliance with OSHA rules or other applicable laws and safety requirements
GENERAL REQUIREMENTS:
• HardiePlank°lap siding can be installed over braced wood or steel studs,20 gauge(33 mils)minimum to 16 gauge(54 mils)maximum,spaced a maximum of 24 in o.c.or directly to
minimum 7/16 in thick OSB sheathing.See General Fastening Requirements.Irregularities in framing and sheathing can mirror through the finished application.Correct irregularities
before installing siding.
• Information on installing James Hardie products over non-nailable substrates(ex:gypsum,foam,etc.)can be located in JH Tech Bulletin 19 at www.jamehardie.com
• A water-resistive barrier is required in accordance with local building code requirements.The water-resistive barrier must be appropriately installed with penetration and junction flashing
in accordance with local building code requirements.James Hardie will assume no responsibility for water infiltration James Hardie does manufacture HardieWrapn Weather Barrier,a
non-woven non-perforated housewrap',which complies with building code requirements.
• When installing James Hardie products all clearance details in figs.3-14 must be followed. Double Wall Figure 1 Single Wall
• Adjacent finished grade must slope away from the building in accordance with local building codes-typically a minimum Construction Construction
of 6 in.in the first 10 ft.. water-resistive let-in bracing
harrier 24 in.0.c.max. ' -
Do not use HardiePlank lap siding in Fascia or Trim applications. `` plyrr000 or 1dr/
i• Do not install James Hardie products,such that they may remain in contact with standing water. OSB sniatring
• HardiePlank lap siding may be installed on flat vertical wall applications only. `� li• For larger projects,including commercial and multi-family projects,where the span of the wall is '''significant in length,the designer and/or architect should take into consideration the coefficient of thermal expansion and /moisture movement of the product in their design.These values can be found in the Technical Bulletin'Expansion /Characteristics of James Hardie=Siding Products"at www.jameshardie.com. i 11111 r•James Hardie Building Products provides installation/wind load information for buildings with a maximum mean roof
height of 85 feet.For information on installations above 60 feet.please contact JH technical support. /�INSTALLATION: JOINT TREATMENT /
Figure 2
One or more of the following joint treatment options are
required by code(as referenced 2009 IRC R703.10.2) SLa Nail ene(if nail liners not
/ e
present,place fastener
A.Joint Flashing(James Hardie recommended) .7.1.4111110" • between 3/4 in.8 1 m. •o •` water-reslsbve
B.Caulking'(Caulking is not recommended re t from top of plank) o,o a barriers
for ColorPlus for aesthetic reasons as the Caulking aamer Nail 3/8 n.from °•< ii fastener
and ColorPlus will weather edge of yank
differently.For the same reason, nasnirr Leave up-opiate gap between • Install a 1 I14 m.starterstrap to
y J ' ensure a consistent plank ante
instal ask;m planks and trim,inen Caulk•
do not caulk nail heads on moderate contact
Color-Plus products.) at Witt joints
C."H" jointer cover ® JamesHardie
Note:Field painting over caulking may produce a sheen difference when compared to the field painted PnmePlus.Teter to Caulking section in these instructions.
'For additional information on HardiewmpT'Weather Barrier,consult Jaynes Hardie at 1-86e-4Hardie or w ww.hardiewrap.com
SELECT CEDARMILL° I SMOOTH I BEADED CEDARMILL° I BEADED SMOOTH I CUSTOM COLONIAL SMOOTH° I CUSTOM COLONIAL"ROUGHSAWN
Visit jameshardiepros.com for the most recent version. HS11119 P1/4 12/19
JOB COPY
'; /yea
,,;,, __ HardiePlank Lag Siding
•
CLEARANCE AND FLASHING REQUIREMENTS
Figure 3 Figure 4 Figure 5 Figure 6
Roof to Wall Horizontal Flashing Kickout Flashing Slabs, Path,Steps to Siding
1
Z FlashingA5 required
N
by IRC code
HO mu 4n x40i.
` 7 Min.1/4 in. '*`
lino jr� tr\ Do not cauullk, I � L in.
e�- '�� ) t '' t� 1 in.
Figure 7 Figure 8 Figure 9 Figure 10 Figure 11
Deck to Wall Ground to Siding Gutter to Siding Sheltered Areas Mortar/Masonry
-7-...-1„......-'
-__________ vms �''�
L-Flashing ��
Z-flashing
riI.:llir:P-:
Z-Fla•hing i Z Fl.shing
•in.y.-'.
Min,;i rt. Olt
n.
Min.Y4 in. 01,011,
n-!'<in.
Figure 12 Figure 13 Figure 14
Drip Edge Block Penetration Valley/Shingle Extension
(Recommended in HZ101
/ Z Fla i 'R4.c.- ,,
i - � Min.Y.ir at : ttn .f-
/�'— 7 Di •+ caulk from the fascia
111,11 (
I
FASTENER REQUIREMENTS*
I Refer to the applicable ESR report online to determine which fastener meets your wind load design criteria.
Blind Nailing is the preferred method of installation for HardiePlank lap siding products.Face nailing should only be used where required by code for high wind areas and must not
be used in conjunction with Blind nailing(Please see JH Tech bulletin 17 for exemption when doing a repair).
BLIND NAILING FACE NAILING
Nails-Wood Framing Nails-Wood Framing
•Siding nail(0.09 in.shank x 0.221 in.HD x 2 in.long) •6d(0.113 in.shank x 0.267 in.HD x 2 in.long)
•11 ga.roofing nail(0.121 in.shank x 0.371 in.HD x 1.25 in.long) •Siding nail(0.09"shank x 0.221"HD x 2"long)
Screws-Steel Framing Screws-Steel Framing
•Ribbed Wafer-head or equivalent(No.8 x 1 1/4 in.long •Ribbed Bugle-head or equivalent(No.8-18 x 1-5/8 in.long x
x 0.375 in.HD)Screws must penetrate 3 threads into metal framing. 0.323 in,HD)Screws must penetrate 3 threads into metal framing.
Nails-Steel Framing Nails-Steel Framing
•ET&F Panelfast'nails or equivalent 0.10 in.shank x 0.313 in.HD x 1-1/2 in.long) •ET&F pin or equivalent(0.10 in.shank x 0.25 in.HD x 1-1/2 in.long)
Nails must penetrate minimum 1/4 in.into metal framing. Nails must penetrate minimum 1/4 in.into metal framing.
OSB minimum 7/16 in. OSB minimum 7/16 in.
I •Siding nail(0.09 in.shank x 0.215 in.HD x 1-1/2 in.'ong •Siding nail(0.09 in.shank x 0.221 in.HD x 1-1/2 in.long)
•Riboed Wafer-head or equivalent(No.8 x 1 5/8 in.long x 0.375 in.HD).
'Also see General Fastening Requirements:and when considering alternative fastening options refer to James Hardie's Technical Bulletin USTB 5-Fastening Tips for HardiePlank Lap Siding.
HS11119 P214 12/19
,o JOB COPY
HardiePlank'Lap Siding
FASTENER REQUIREMENTS continued
24. _..----
Figure 15 Figure 16 Stud -- 0 0 max
24
Stu »-___- 0 C max - Joint
1 1!4'min
J _ Minimum overlap Flashing - ---_ _ _ „_. Overlap
_�_ _ for Both Face _ !
—17:-,�— - /{� and Blind Nailing --�„•r. ''
----Nail Line/ �,.'" I
i/-- L — I ' f1`_ --
Blind
e f B6M Nail min 1 1/4 in. t !•dl-1-5.---)—*
:____>
— ' Fac
overlap
. j �-- Water Resistive
Water Resistive I /---'- - Barrer
1 1/4'min Barner , ;
Overlap ----
Laminate sheet to be removed immediately after installation of each course for ColorPlus`products.
IPin-backed corners may be done for aesthetic purposes only.Finish nails are recommended for pin-backs.Headed siding nails are allowed.Place pin-backs
no closer than 1 in.from plank ends and 3/4 in.from plank edge into min.3/8 in.wood structural panel.Pin-backs are not a substitute for blind or face nailing.
GENERAL FASTENING REQUIREMENTS PNEUMATIC FASTENING
Fasteners must be corrosion resistant,galvanized,or stainless steel.Electro-galvanized James Hardie products can be hand nailed or fastened with a pneumatic tool.
are acceptable but may exhibit premature corrosion. James Hardie recommends the Pneumatic fastening is highly recommended. Set air pressure so that the
use of quality,hot-dipped galvanized nails.James Hardie is not responsible for the fastener is driven snug with the surface of the siding.A flush mount
corrosion resistance of fasteners.Stainless steel fasteners are recommended when attachment on the pneumatic tool is recommended. This will help control the
installing James Hardie`products near tie ocean,large bodies of water,or in very depth the nail is driven.If setting the nail depth
humid climates. Ilk
� proves difficult,choose a setting that under drives
Manufacturers of ACQ and CA preservative-treated wood recommend spacer materials031 the nail. (Drive under driven nails snug with a
or other physical barriers toprevent direct contact of ACO or CA preservative-treatedsmooth faced hammereDoes not apply for
P >'� SNUG FLUSH installation to steel framing).
wood and aluminum products.Fasteners used to attach HardieTrim Tabs to preserva-
tive-treated wood shall be of hot dipped zinc-coated galvanized steel or stainless steel
and in accordance to 2009 IRC R317.3 or 2009 IBC 2304.9.5 DO NOT DO NOT DO NOT USE
• Consult applicable product evaluation or listing for correct fasteners type and gl
placement to achieve specified design wind loads. 4144
4)
• NOTE:Published wind loads may not be applicable to all areas where Local Building
Codes have specific jurisdiction.Consult James Hardie Technical Services if you are UNDER OVER SLANT ALUMINUM
unsure of applicable compliance documentation. DRIVE DRIVE FASTENERS
• Drive fasteners perpendicular to siding and framing.
• Fastener heads should fit snug against siding(no air space). IF,THEN IF,THEN ADDITIONAL NAIL
•NOTE:Whenever a structural member is present,HardiePlank should be fastened with
even spacing to the structural member.The tables allowing direct to OSB or plywood WOOD STEEL FACE CLIPPED
should only be used when traditional framing is not available. FRAME FRAME NAIL HEAD NAILS
CUT EDGE TREATMENT 0> f'C
Caulk,paint or prime all field cut edges.James Hardie touch-up kits are required to
S'
touch-up ColorPlus products.
COUNTERSINK STAPLES
HAMME
CAULKING FLUSHl' BFIu
For best results use an Elastomeric Joint Sealant complying with ASTM C920 Grade NS, REMOVES
Class 25 or higher or a Latex Joint Sealant complying with ASTM C834.Caulking/Sealant REPLACE
must be applied in accordance with the caulking/sealant manufacturer's written instructions.
Note:some caulking manufacturers do not allow"tooling".
PAINTING
DO NOT use stain,oil/alkyd base paint,or powder coating on James Hardie- Products.Factory-primed James Hardie products must be painted within 180 days of installation.
100%acrylic topcoats are recommended.Do not paint when wet.For application rates refer to paint manufacturers specifications.Back-rolling is recommended if the siding
is spayed.
11511119 P14 12119
(4:Ay-EL,
J 0 B C 0 PY HardiePtank'Lap Siding
COLORPLUS®TECHNOLOGY CAULKING,TOUCH-UP& LAMINATE
•Care should be taken vihen handling and cutting James Hardie ColorPlus`products.During installation use a wet soft cloth or soft brush to gently wipe off any
residue or construction dust left on the product,then rinse with a garden hose.
•Touch up nicks,scrapes and nail heads using the ColorPlus'Technology touch-up applicator:Touch-up should be used sparingly.
If large areas require touch-up,replace the damaged area with new HardiePtank lap siding with ColorPlus'''Technology.
•Laminate sheet must be removed immediately after installation of each course.
•Terminate non-factory cut edges into trim where possible,and caulk.Color matched caulks are available from your ColorPlus'v product dealer.
•Treat all other non-factory cut edges using the CotorPlus Technology edge coaters,available from your ColorPlus product dealer.
Note:James Hardie does not warrant the usage of third party touch-up or paints used as touch-up on James Hardie Color-Plus products.
Problems with appearance or performance arising from use of third party touch-up paints or pants used as touch-up that are not James Hardie touch-up will not be covered
under the James Hardie Color-Plus Limited Finish Warranty.
PAINTING JAMES HARDIER'SIDING AND TRIM PRODUCTS WITH COLORPLUS®TECHNOLOGY
When repainting ColorPlus products,James Hardie recommends the following regarding surface preparation and topcoat application:
• Ensure the surface is clean,dry,and free of any dust,dirt,or mildew
• Repriming is normally not necessary
•100%acrylic topcoats are recommended
• DO NOT use stain,oil/alkyd base paint,or powder coating on James Hardie'Products.
•Apply finish coat in accordance with paint manufacturers written instructions regarding coverage,application methods,and application temperature
• DO NOT caulk nail heads when using ColorPlus products,refer to the ColorPlus touch-up section
COVERAGE CHART/ESTIMATING GUIDE
Number of 12 ft.planks,does not include waste
COVERAGE AREA LESS O NINGS 51/4 6114 RD)E/PIiAd1K'°ylVIDINC1WIDTH 81/4 91/4 91/2 12
(1 SO=100 sq.ft.) (exposure) 4 5 6 61/4 6 3/4 7 8 81/4 103/4
1 25 20 17 16 15 14 13 13 9
2 50 40 33 32 30 29 25 25 19
3 75 60 50 48 44 43 38 38 28
4 100 80 67 64 59 57 50 50 37
5 125 100 83 80 74 71 63 63 47
6 150 t20 100 96 89 86 75 75 56
7 175 140 117 112 104 100 88 88 65
8 200 160 133 128 119 114 100 100 74
9 225 180 150 144 133 129 113 113 84
10 250 200 167 160 148 143 125 125 93
11 275 220 183 176 163 157 138 138 102
12 300 240 200 192 178 171 150 150 112
13 325 260 217 208 193 186 163 163 121
14 350 280 233 224 207 200 175 175 130
15 375 300 250 240 222 214 188 168 140
16 400 320 267 256 237 229 200 200 149
17 425 340 283 272 252 243 213 213 158
18 450 360 300 288 267 257 225 225 167
19 475 380 317 304 281 271 238 238 177
20 500 400 333 320 2% 286 250 250 186
This coverage chart is meant as a guide.Actual usage is subject to variables such as building design.James Hardie does not assume responsibility for over or under
ordering of product.
HS11119 P4/4 12/19
$' DANGER:May cause cancer it dust tram product is inhaled.Causes damage to lungs and rosy aw y system through prolonged on repeated irtttaJatien of dust from product-Refer to the current product Safety Dam Sheet before use.
J The hazard associated with liber cement arises torn crystalline silica present in the dust generated by actedles such as cutting machining,dnikrg,routing,sawing.crushing.or otherwise abrading fiber cement,and when cleaning
up,disposing of or moving the dust When doing any of these activities in a manner that generates dust you roust(1)comply with the OSHA standard for silica dust and/or other applicable law,(2)follow James Hardie cutting I
1 instructions to reduce or limit the release of dust:(3)warn others in the area to avoid breathing the dust(4)when using mechanical saw or high speed putting tools,work outdoors and use dust collection equipment and(51#no 3
CYf,ii ether dust controls are avmeatle.wear a dust mask or respirator that meets NIOSH requirements,e g.N-95 dust mask).During c:ean-up,Ise a well maintained vacuum and filter appropriate for capturing fine(respirable)dust or use I
4 wet clean-up methods•never dry sweep. I
— -- — J
'1.WARNING:This product can expose you to chemicals including respirable crystalline silica,which is known to the Stale of California to cause cancer.For more information go to PSSWamin .cogov-.
RECAGNmoN:I In accordance with ICC-ES Evaluator Report ES0.2290,HardtePlankti lap siding is recognized as a suitable alternate to that specified in the 2006,2009.2012 6 2015 International Residential Code for One and Two-Family
Dwellings,and the 2006.2009,2012 6 2015 International Building Code HardiePtank lap siding is also recognized for application in the following.Cry of Los Angeles Research Report No 24862.State of Florida ProductApporal FLn 13192.
Miami-Dade County Ronda H06 No.17.0406.06,US Dept of HUD Materials Release 12631,Texas Department et Insurance Product Evaluation EC-23.City of New York MEA 223-93-M,and California DSA PA-019.These documents should
also De consulted for additional information concerning the suitability of this product for specific applicatons
erui8dames name Building Products.snc As rgars reservee TM SM ave® Product warranties,safety information and additional installation €i) JamesHardie
der-rate eadernarks or registered trademarks 01 James Career Tecrutmogy Ltmired information are available at jameshardiepros corn